aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/stmicro
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/stmicro')
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c7
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/stmmac_main.c30
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c2
3 files changed, 6 insertions, 33 deletions
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
index 26ea8c687881..a0e276783e65 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
@@ -104,6 +104,7 @@ struct stm32_ops {
int (*parse_data)(struct stm32_dwmac *dwmac,
struct device *dev);
u32 syscfg_eth_mask;
+ bool clk_rx_enable_in_suspend;
};
static int stm32_dwmac_init(struct plat_stmmacenet_data *plat_dat)
@@ -121,7 +122,8 @@ static int stm32_dwmac_init(struct plat_stmmacenet_data *plat_dat)
if (ret)
return ret;
- if (!dwmac->dev->power.is_suspended) {
+ if (!dwmac->ops->clk_rx_enable_in_suspend ||
+ !dwmac->dev->power.is_suspended) {
ret = clk_prepare_enable(dwmac->clk_rx);
if (ret) {
clk_disable_unprepare(dwmac->clk_tx);
@@ -513,7 +515,8 @@ static struct stm32_ops stm32mp1_dwmac_data = {
.suspend = stm32mp1_suspend,
.resume = stm32mp1_resume,
.parse_data = stm32mp1_parse_data,
- .syscfg_eth_mask = SYSCFG_MP1_ETH_MASK
+ .syscfg_eth_mask = SYSCFG_MP1_ETH_MASK,
+ .clk_rx_enable_in_suspend = true
};
static const struct of_device_id stm32_dwmac_match[] = {
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 83c567a89a46..ed1a5a31a491 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -6002,33 +6002,6 @@ static irqreturn_t stmmac_msi_intr_rx(int irq, void *data)
return IRQ_HANDLED;
}
-#ifdef CONFIG_NET_POLL_CONTROLLER
-/* Polling receive - used by NETCONSOLE and other diagnostic tools
- * to allow network I/O with interrupts disabled.
- */
-static void stmmac_poll_controller(struct net_device *dev)
-{
- struct stmmac_priv *priv = netdev_priv(dev);
- int i;
-
- /* If adapter is down, do nothing */
- if (test_bit(STMMAC_DOWN, &priv->state))
- return;
-
- if (priv->plat->flags & STMMAC_FLAG_MULTI_MSI_EN) {
- for (i = 0; i < priv->plat->rx_queues_to_use; i++)
- stmmac_msi_intr_rx(0, &priv->dma_conf.rx_queue[i]);
-
- for (i = 0; i < priv->plat->tx_queues_to_use; i++)
- stmmac_msi_intr_tx(0, &priv->dma_conf.tx_queue[i]);
- } else {
- disable_irq(dev->irq);
- stmmac_interrupt(dev->irq, dev);
- enable_irq(dev->irq);
- }
-}
-#endif
-
/**
* stmmac_ioctl - Entry point for the Ioctl
* @dev: Device pointer.
@@ -6989,9 +6962,6 @@ static const struct net_device_ops stmmac_netdev_ops = {
.ndo_get_stats64 = stmmac_get_stats64,
.ndo_setup_tc = stmmac_setup_tc,
.ndo_select_queue = stmmac_select_queue,
-#ifdef CONFIG_NET_POLL_CONTROLLER
- .ndo_poll_controller = stmmac_poll_controller,
-#endif
.ndo_set_mac_address = stmmac_set_mac_address,
.ndo_vlan_rx_add_vid = stmmac_vlan_rx_add_vid,
.ndo_vlan_rx_kill_vid = stmmac_vlan_rx_kill_vid,
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 0f28795e581c..2f0678f15fb7 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -901,7 +901,7 @@ static int __maybe_unused stmmac_pltfr_resume(struct device *dev)
struct platform_device *pdev = to_platform_device(dev);
int ret;
- ret = stmmac_pltfr_init(pdev, priv->plat->bsp_priv);
+ ret = stmmac_pltfr_init(pdev, priv->plat);
if (ret)
return ret;