diff options
Diffstat (limited to 'drivers/net/ethernet/stmicro/stmmac/stmmac_main.c')
-rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 76 |
1 files changed, 52 insertions, 24 deletions
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 6708ca2aa4f7..422e3225f476 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -402,7 +402,7 @@ static void stmmac_lpi_entry_timer_config(struct stmmac_priv *priv, bool en) * Description: this function is to verify and enter in LPI mode in case of * EEE. */ -static void stmmac_enable_eee_mode(struct stmmac_priv *priv) +static int stmmac_enable_eee_mode(struct stmmac_priv *priv) { u32 tx_cnt = priv->plat->tx_queues_to_use; u32 queue; @@ -412,13 +412,14 @@ static void stmmac_enable_eee_mode(struct stmmac_priv *priv) struct stmmac_tx_queue *tx_q = &priv->tx_queue[queue]; if (tx_q->dirty_tx != tx_q->cur_tx) - return; /* still unfinished work */ + return -EBUSY; /* still unfinished work */ } /* Check and enter in LPI mode */ if (!priv->tx_path_in_lpi_mode) stmmac_set_eee_mode(priv, priv->hw, priv->plat->en_tx_lpi_clockgating); + return 0; } /** @@ -450,8 +451,8 @@ static void stmmac_eee_ctrl_timer(struct timer_list *t) { struct stmmac_priv *priv = from_timer(priv, t, eee_ctrl_timer); - stmmac_enable_eee_mode(priv); - mod_timer(&priv->eee_ctrl_timer, STMMAC_LPI_T(priv->tx_lpi_timer)); + if (stmmac_enable_eee_mode(priv)) + mod_timer(&priv->eee_ctrl_timer, STMMAC_LPI_T(priv->tx_lpi_timer)); } /** @@ -889,6 +890,9 @@ static int stmmac_init_ptp(struct stmmac_priv *priv) bool xmac = priv->plat->has_gmac4 || priv->plat->has_xgmac; int ret; + if (priv->plat->ptp_clk_freq_config) + priv->plat->ptp_clk_freq_config(priv); + ret = stmmac_init_tstamp_counter(priv, STMMAC_HWTS_ACTIVE); if (ret) return ret; @@ -911,8 +915,6 @@ static int stmmac_init_ptp(struct stmmac_priv *priv) priv->hwts_tx_en = 0; priv->hwts_rx_en = 0; - stmmac_ptp_register(priv); - return 0; } @@ -2260,6 +2262,23 @@ static void stmmac_stop_tx_dma(struct stmmac_priv *priv, u32 chan) stmmac_stop_tx(priv, priv->ioaddr, chan); } +static void stmmac_enable_all_dma_irq(struct stmmac_priv *priv) +{ + u32 rx_channels_count = priv->plat->rx_queues_to_use; + u32 tx_channels_count = priv->plat->tx_queues_to_use; + u32 dma_csr_ch = max(rx_channels_count, tx_channels_count); + u32 chan; + + for (chan = 0; chan < dma_csr_ch; chan++) { + struct stmmac_channel *ch = &priv->channel[chan]; + unsigned long flags; + + spin_lock_irqsave(&ch->lock, flags); + stmmac_enable_dma_irq(priv, priv->ioaddr, chan, 1, 1); + spin_unlock_irqrestore(&ch->lock, flags); + } +} + /** * stmmac_start_all_dma - start all RX and TX DMA channels * @priv: driver private structure @@ -2647,8 +2666,8 @@ static int stmmac_tx_clean(struct stmmac_priv *priv, int budget, u32 queue) if (priv->eee_enabled && !priv->tx_path_in_lpi_mode && priv->eee_sw_timer_en) { - stmmac_enable_eee_mode(priv); - mod_timer(&priv->eee_ctrl_timer, STMMAC_LPI_T(priv->tx_lpi_timer)); + if (stmmac_enable_eee_mode(priv)) + mod_timer(&priv->eee_ctrl_timer, STMMAC_LPI_T(priv->tx_lpi_timer)); } /* We still have pending packets, let's call for a new scheduling */ @@ -2902,8 +2921,10 @@ static int stmmac_init_dma_engine(struct stmmac_priv *priv) stmmac_axi(priv, priv->ioaddr, priv->plat->axi); /* DMA CSR Channel configuration */ - for (chan = 0; chan < dma_csr_ch; chan++) + for (chan = 0; chan < dma_csr_ch; chan++) { stmmac_init_chan(priv, priv->ioaddr, priv->plat->dma_cfg, chan); + stmmac_disable_dma_irq(priv, priv->ioaddr, chan, 1, 1); + } /* DMA RX Channel Configuration */ for (chan = 0; chan < rx_channels_count; chan++) { @@ -3238,7 +3259,7 @@ static int stmmac_fpe_start_wq(struct stmmac_priv *priv) /** * stmmac_hw_setup - setup mac in a usable state. * @dev : pointer to the device structure. - * @init_ptp: initialize PTP if set + * @ptp_register: register PTP if set * Description: * this is the main function to setup the HW in a usable state because the * dma engine is reset, the core registers are configured (e.g. AXI, @@ -3248,7 +3269,7 @@ static int stmmac_fpe_start_wq(struct stmmac_priv *priv) * 0 on success and an appropriate (-)ve integer as defined in errno.h * file on failure. */ -static int stmmac_hw_setup(struct net_device *dev, bool init_ptp) +static int stmmac_hw_setup(struct net_device *dev, bool ptp_register) { struct stmmac_priv *priv = netdev_priv(dev); u32 rx_cnt = priv->plat->rx_queues_to_use; @@ -3305,13 +3326,13 @@ static int stmmac_hw_setup(struct net_device *dev, bool init_ptp) stmmac_mmc_setup(priv); - if (init_ptp) { - ret = stmmac_init_ptp(priv); - if (ret == -EOPNOTSUPP) - netdev_warn(priv->dev, "PTP not supported by HW\n"); - else if (ret) - netdev_warn(priv->dev, "PTP init failed\n"); - } + ret = stmmac_init_ptp(priv); + if (ret == -EOPNOTSUPP) + netdev_warn(priv->dev, "PTP not supported by HW\n"); + else if (ret) + netdev_warn(priv->dev, "PTP init failed\n"); + else if (ptp_register) + stmmac_ptp_register(priv); priv->eee_tw_timer = STMMAC_DEFAULT_TWT_LS; @@ -3759,6 +3780,7 @@ static int stmmac_open(struct net_device *dev) stmmac_enable_all_queues(priv); netif_tx_start_all_queues(priv->dev); + stmmac_enable_all_dma_irq(priv); return 0; @@ -6508,8 +6530,10 @@ int stmmac_xdp_open(struct net_device *dev) } /* DMA CSR Channel configuration */ - for (chan = 0; chan < dma_csr_ch; chan++) + for (chan = 0; chan < dma_csr_ch; chan++) { stmmac_init_chan(priv, priv->ioaddr, priv->plat->dma_cfg, chan); + stmmac_disable_dma_irq(priv, priv->ioaddr, chan, 1, 1); + } /* Adjust Split header */ sph_en = (priv->hw->rx_csum > 0) && priv->sph; @@ -6570,6 +6594,7 @@ int stmmac_xdp_open(struct net_device *dev) stmmac_enable_all_queues(priv); netif_carrier_on(dev); netif_tx_start_all_queues(dev); + stmmac_enable_all_dma_irq(priv); return 0; @@ -7250,6 +7275,10 @@ int stmmac_dvr_remove(struct device *dev) netdev_info(priv->dev, "%s: removing driver", __func__); + pm_runtime_get_sync(dev); + pm_runtime_disable(dev); + pm_runtime_put_noidle(dev); + stmmac_stop_all_dma(priv); stmmac_mac_set(priv, priv->ioaddr, false); netif_carrier_off(ndev); @@ -7268,8 +7297,6 @@ int stmmac_dvr_remove(struct device *dev) if (priv->plat->stmmac_rst) reset_control_assert(priv->plat->stmmac_rst); reset_control_assert(priv->plat->stmmac_ahb_rst); - pm_runtime_put(dev); - pm_runtime_disable(dev); if (priv->hw->pcs != STMMAC_PCS_TBI && priv->hw->pcs != STMMAC_PCS_RTBI) stmmac_mdio_unregister(ndev); @@ -7447,6 +7474,7 @@ int stmmac_resume(struct device *dev) stmmac_restore_hw_vlan_rx_fltr(priv, ndev, priv->hw); stmmac_enable_all_queues(priv); + stmmac_enable_all_dma_irq(priv); mutex_unlock(&priv->lock); rtnl_unlock(); @@ -7463,7 +7491,7 @@ static int __init stmmac_cmdline_opt(char *str) char *opt; if (!str || !*str) - return -EINVAL; + return 1; while ((opt = strsep(&str, ",")) != NULL) { if (!strncmp(opt, "debug:", 6)) { if (kstrtoint(opt + 6, 0, &debug)) @@ -7494,11 +7522,11 @@ static int __init stmmac_cmdline_opt(char *str) goto err; } } - return 0; + return 1; err: pr_err("%s: ERROR broken module parameter conversion", __func__); - return -EINVAL; + return 1; } __setup("stmmaceth=", stmmac_cmdline_opt); |