1 files changed, 526 insertions, 71 deletions

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
index 9e40c28d453a..bfe6e2d631bd 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
@@ -8,15 +8,90 @@
 #include <linux/device.h>
 #include <linux/of_irq.h>
 #include "stmmac.h"
+#include "dwmac_dma.h"
+#include "dwmac1000.h"
+
+/* Normal Loongson Tx Summary */
+#define DMA_INTR_ENA_NIE_TX_LOONGSON	0x00040000
+/* Normal Loongson Rx Summary */
+#define DMA_INTR_ENA_NIE_RX_LOONGSON	0x00020000
+
+#define DMA_INTR_NORMAL_LOONGSON	(DMA_INTR_ENA_NIE_TX_LOONGSON | \
+					 DMA_INTR_ENA_NIE_RX_LOONGSON | \
+					 DMA_INTR_ENA_RIE | DMA_INTR_ENA_TIE)
+
+/* Abnormal Loongson Tx Summary */
+#define DMA_INTR_ENA_AIE_TX_LOONGSON	0x00010000
+/* Abnormal Loongson Rx Summary */
+#define DMA_INTR_ENA_AIE_RX_LOONGSON	0x00008000
+
+#define DMA_INTR_ABNORMAL_LOONGSON	(DMA_INTR_ENA_AIE_TX_LOONGSON | \
+					 DMA_INTR_ENA_AIE_RX_LOONGSON | \
+					 DMA_INTR_ENA_FBE | DMA_INTR_ENA_UNE)
+
+#define DMA_INTR_DEFAULT_MASK_LOONGSON	(DMA_INTR_NORMAL_LOONGSON | \
+					 DMA_INTR_ABNORMAL_LOONGSON)
+
+/* Normal Loongson Tx Interrupt Summary */
+#define DMA_STATUS_NIS_TX_LOONGSON	0x00040000
+/* Normal Loongson Rx Interrupt Summary */
+#define DMA_STATUS_NIS_RX_LOONGSON	0x00020000
+
+/* Abnormal Loongson Tx Interrupt Summary */
+#define DMA_STATUS_AIS_TX_LOONGSON	0x00010000
+/* Abnormal Loongson Rx Interrupt Summary */
+#define DMA_STATUS_AIS_RX_LOONGSON	0x00008000
+
+/* Fatal Loongson Tx Bus Error Interrupt */
+#define DMA_STATUS_FBI_TX_LOONGSON	0x00002000
+/* Fatal Loongson Rx Bus Error Interrupt */
+#define DMA_STATUS_FBI_RX_LOONGSON	0x00001000
+
+#define DMA_STATUS_MSK_COMMON_LOONGSON	(DMA_STATUS_NIS_TX_LOONGSON | \
+					 DMA_STATUS_NIS_RX_LOONGSON | \
+					 DMA_STATUS_AIS_TX_LOONGSON | \
+					 DMA_STATUS_AIS_RX_LOONGSON | \
+					 DMA_STATUS_FBI_TX_LOONGSON | \
+					 DMA_STATUS_FBI_RX_LOONGSON)
+
+#define DMA_STATUS_MSK_RX_LOONGSON	(DMA_STATUS_ERI | DMA_STATUS_RWT | \
+					 DMA_STATUS_RPS | DMA_STATUS_RU  | \
+					 DMA_STATUS_RI  | DMA_STATUS_OVF | \
+					 DMA_STATUS_MSK_COMMON_LOONGSON)
+
+#define DMA_STATUS_MSK_TX_LOONGSON	(DMA_STATUS_ETI | DMA_STATUS_UNF | \
+					 DMA_STATUS_TJT | DMA_STATUS_TU  | \
+					 DMA_STATUS_TPS | DMA_STATUS_TI  | \
+					 DMA_STATUS_MSK_COMMON_LOONGSON)
+
+#define PCI_DEVICE_ID_LOONGSON_GMAC	0x7a03
+#define PCI_DEVICE_ID_LOONGSON_GNET	0x7a13
+#define DWMAC_CORE_LS_MULTICHAN	0x10	/* Loongson custom ID */
+#define CHANNEL_NUM			8
+
+struct loongson_data {
+	u32 loongson_id;
+	struct device *dev;
+};
+
+struct stmmac_pci_info {
+	int (*setup)(struct pci_dev *pdev, struct plat_stmmacenet_data *plat);
+};
 
-static int loongson_default_data(struct plat_stmmacenet_data *plat)
+static void loongson_default_data(struct pci_dev *pdev,
+				  struct plat_stmmacenet_data *plat)
 {
+	/* Get bus_id, this can be overwritten later */
+	plat->bus_id = pci_dev_id(pdev);
+
 	plat->clk_csr = 2;	/* clk_csr_i = 20-35MHz & MDC = clk_csr_i/16 */
 	plat->has_gmac = 1;
 	plat->force_sf_dma_mode = 1;
 
 	/* Set default value for multicast hash bins */
-	plat->multicast_filter_bins = HASH_TABLE_SIZE;
+	plat->multicast_filter_bins = 256;
+
+	plat->mac_interface = PHY_INTERFACE_MODE_NA;
 
 	/* Set default value for unicast filter entries */
 	plat->unicast_filter_entries = 1;
@@ -24,10 +99,6 @@ static int loongson_default_data(struct plat_stmmacenet_data *plat)
 	/* Set the maxmtu to a default of JUMBO_LEN */
 	plat->maxmtu = JUMBO_LEN;
 
-	/* Set default number of RX and TX queues to use */
-	plat->tx_queues_to_use = 1;
-	plat->rx_queues_to_use = 1;
-
 	/* Disable Priority config by default */
 	plat->tx_queues_cfg[0].use_prio = false;
 	plat->rx_queues_cfg[0].use_prio = false;
@@ -35,30 +106,424 @@ static int loongson_default_data(struct plat_stmmacenet_data *plat)
 	/* Disable RX queues routing by default */
 	plat->rx_queues_cfg[0].pkt_route = 0x0;
 
+	plat->clk_ref_rate = 125000000;
+	plat->clk_ptp_rate = 125000000;
+
 	/* Default to phy auto-detection */
 	plat->phy_addr = -1;
 
 	plat->dma_cfg->pbl = 32;
 	plat->dma_cfg->pblx8 = true;
+}
+
+static int loongson_gmac_data(struct pci_dev *pdev,
+			      struct plat_stmmacenet_data *plat)
+{
+	struct loongson_data *ld;
+	int i;
+
+	ld = plat->bsp_priv;
+
+	loongson_default_data(pdev, plat);
+
+	if (ld->loongson_id == DWMAC_CORE_LS_MULTICHAN) {
+		plat->rx_queues_to_use = CHANNEL_NUM;
+		plat->tx_queues_to_use = CHANNEL_NUM;
+
+		/* Only channel 0 supports checksum,
+		 * so turn off checksum to enable multiple channels.
+		 */
+		for (i = 1; i < CHANNEL_NUM; i++)
+			plat->tx_queues_cfg[i].coe_unsupported = 1;
+	} else {
+		plat->tx_queues_to_use = 1;
+		plat->rx_queues_to_use = 1;
+	}
+
+	plat->phy_interface = PHY_INTERFACE_MODE_RGMII_ID;
 
-	plat->multicast_filter_bins = 256;
 	return 0;
 }
 
-static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+static struct stmmac_pci_info loongson_gmac_pci_info = {
+	.setup = loongson_gmac_data,
+};
+
+static void loongson_gnet_fix_speed(void *priv, unsigned int speed,
+				    unsigned int mode)
 {
-	struct plat_stmmacenet_data *plat;
-	struct stmmac_resources res;
-	struct device_node *np;
-	int ret, i, phy_mode;
+	struct loongson_data *ld = (struct loongson_data *)priv;
+	struct net_device *ndev = dev_get_drvdata(ld->dev);
+	struct stmmac_priv *ptr = netdev_priv(ndev);
+
+	/* The integrated PHY has a weird problem with switching from the low
+	 * speeds to 1000Mbps mode. The speedup procedure requires the PHY-link
+	 * re-negotiation.
+	 */
+	if (speed == SPEED_1000) {
+		if (readl(ptr->ioaddr + MAC_CTRL_REG) &
+		    GMAC_CONTROL_PS)
+			/* Word around hardware bug, restart autoneg */
+			phy_restart_aneg(ndev->phydev);
+	}
+}
 
-	np = dev_of_node(&pdev->dev);
+static int loongson_gnet_data(struct pci_dev *pdev,
+			      struct plat_stmmacenet_data *plat)
+{
+	struct loongson_data *ld;
+	int i;
 
-	if (!np) {
-		pr_info("dwmac_loongson_pci: No OF node\n");
-		return -ENODEV;
+	ld = plat->bsp_priv;
+
+	loongson_default_data(pdev, plat);
+
+	if (ld->loongson_id == DWMAC_CORE_LS_MULTICHAN) {
+		plat->rx_queues_to_use = CHANNEL_NUM;
+		plat->tx_queues_to_use = CHANNEL_NUM;
+
+		/* Only channel 0 supports checksum,
+		 * so turn off checksum to enable multiple channels.
+		 */
+		for (i = 1; i < CHANNEL_NUM; i++)
+			plat->tx_queues_cfg[i].coe_unsupported = 1;
+	} else {
+		plat->tx_queues_to_use = 1;
+		plat->rx_queues_to_use = 1;
 	}
 
+	plat->phy_interface = PHY_INTERFACE_MODE_GMII;
+	plat->mdio_bus_data->phy_mask = ~(u32)BIT(2);
+	plat->fix_mac_speed = loongson_gnet_fix_speed;
+
+	return 0;
+}
+
+static struct stmmac_pci_info loongson_gnet_pci_info = {
+	.setup = loongson_gnet_data,
+};
+
+static void loongson_dwmac_dma_init_channel(struct stmmac_priv *priv,
+					    void __iomem *ioaddr,
+					    struct stmmac_dma_cfg *dma_cfg,
+					    u32 chan)
+{
+	int txpbl = dma_cfg->txpbl ?: dma_cfg->pbl;
+	int rxpbl = dma_cfg->rxpbl ?: dma_cfg->pbl;
+	u32 value;
+
+	value = readl(ioaddr + DMA_CHAN_BUS_MODE(chan));
+
+	if (dma_cfg->pblx8)
+		value |= DMA_BUS_MODE_MAXPBL;
+
+	value |= DMA_BUS_MODE_USP;
+	value &= ~(DMA_BUS_MODE_PBL_MASK | DMA_BUS_MODE_RPBL_MASK);
+	value |= (txpbl << DMA_BUS_MODE_PBL_SHIFT);
+	value |= (rxpbl << DMA_BUS_MODE_RPBL_SHIFT);
+
+	/* Set the Fixed burst mode */
+	if (dma_cfg->fixed_burst)
+		value |= DMA_BUS_MODE_FB;
+
+	/* Mixed Burst has no effect when fb is set */
+	if (dma_cfg->mixed_burst)
+		value |= DMA_BUS_MODE_MB;
+
+	if (dma_cfg->atds)
+		value |= DMA_BUS_MODE_ATDS;
+
+	if (dma_cfg->aal)
+		value |= DMA_BUS_MODE_AAL;
+
+	writel(value, ioaddr + DMA_CHAN_BUS_MODE(chan));
+
+	/* Mask interrupts by writing to CSR7 */
+	writel(DMA_INTR_DEFAULT_MASK_LOONGSON, ioaddr +
+	       DMA_CHAN_INTR_ENA(chan));
+}
+
+static int loongson_dwmac_dma_interrupt(struct stmmac_priv *priv,
+					void __iomem *ioaddr,
+					struct stmmac_extra_stats *x,
+					u32 chan, u32 dir)
+{
+	struct stmmac_pcpu_stats *stats = this_cpu_ptr(priv->xstats.pcpu_stats);
+	u32 abnor_intr_status;
+	u32 nor_intr_status;
+	u32 fb_intr_status;
+	u32 intr_status;
+	int ret = 0;
+
+	/* read the status register (CSR5) */
+	intr_status = readl(ioaddr + DMA_CHAN_STATUS(chan));
+
+	if (dir == DMA_DIR_RX)
+		intr_status &= DMA_STATUS_MSK_RX_LOONGSON;
+	else if (dir == DMA_DIR_TX)
+		intr_status &= DMA_STATUS_MSK_TX_LOONGSON;
+
+	nor_intr_status = intr_status & (DMA_STATUS_NIS_TX_LOONGSON |
+		DMA_STATUS_NIS_RX_LOONGSON);
+	abnor_intr_status = intr_status & (DMA_STATUS_AIS_TX_LOONGSON |
+		DMA_STATUS_AIS_RX_LOONGSON);
+	fb_intr_status = intr_status & (DMA_STATUS_FBI_TX_LOONGSON |
+		DMA_STATUS_FBI_RX_LOONGSON);
+
+	/* ABNORMAL interrupts */
+	if (unlikely(abnor_intr_status)) {
+		if (unlikely(intr_status & DMA_STATUS_UNF)) {
+			ret = tx_hard_error_bump_tc;
+			x->tx_undeflow_irq++;
+		}
+		if (unlikely(intr_status & DMA_STATUS_TJT))
+			x->tx_jabber_irq++;
+		if (unlikely(intr_status & DMA_STATUS_OVF))
+			x->rx_overflow_irq++;
+		if (unlikely(intr_status & DMA_STATUS_RU))
+			x->rx_buf_unav_irq++;
+		if (unlikely(intr_status & DMA_STATUS_RPS))
+			x->rx_process_stopped_irq++;
+		if (unlikely(intr_status & DMA_STATUS_RWT))
+			x->rx_watchdog_irq++;
+		if (unlikely(intr_status & DMA_STATUS_ETI))
+			x->tx_early_irq++;
+		if (unlikely(intr_status & DMA_STATUS_TPS)) {
+			x->tx_process_stopped_irq++;
+			ret = tx_hard_error;
+		}
+		if (unlikely(fb_intr_status)) {
+			x->fatal_bus_error_irq++;
+			ret = tx_hard_error;
+		}
+	}
+	/* TX/RX NORMAL interrupts */
+	if (likely(nor_intr_status)) {
+		if (likely(intr_status & DMA_STATUS_RI)) {
+			u32 value = readl(ioaddr + DMA_INTR_ENA);
+			/* to schedule NAPI on real RIE event. */
+			if (likely(value & DMA_INTR_ENA_RIE)) {
+				u64_stats_update_begin(&stats->syncp);
+				u64_stats_inc(&stats->rx_normal_irq_n[chan]);
+				u64_stats_update_end(&stats->syncp);
+				ret |= handle_rx;
+			}
+		}
+		if (likely(intr_status & DMA_STATUS_TI)) {
+			u64_stats_update_begin(&stats->syncp);
+			u64_stats_inc(&stats->tx_normal_irq_n[chan]);
+			u64_stats_update_end(&stats->syncp);
+			ret |= handle_tx;
+		}
+		if (unlikely(intr_status & DMA_STATUS_ERI))
+			x->rx_early_irq++;
+	}
+	/* Optional hardware blocks, interrupts should be disabled */
+	if (unlikely(intr_status &
+		     (DMA_STATUS_GPI | DMA_STATUS_GMI | DMA_STATUS_GLI)))
+		pr_warn("%s: unexpected status %08x\n", __func__, intr_status);
+
+	/* Clear the interrupt by writing a logic 1 to the CSR5[19-0] */
+	writel((intr_status & 0x7ffff), ioaddr + DMA_CHAN_STATUS(chan));
+
+	return ret;
+}
+
+static struct mac_device_info *loongson_dwmac_setup(void *apriv)
+{
+	struct stmmac_priv *priv = apriv;
+	struct mac_device_info *mac;
+	struct stmmac_dma_ops *dma;
+	struct loongson_data *ld;
+	struct pci_dev *pdev;
+
+	ld = priv->plat->bsp_priv;
+	pdev = to_pci_dev(priv->device);
+
+	mac = devm_kzalloc(priv->device, sizeof(*mac), GFP_KERNEL);
+	if (!mac)
+		return NULL;
+
+	dma = devm_kzalloc(priv->device, sizeof(*dma), GFP_KERNEL);
+	if (!dma)
+		return NULL;
+
+	/* The Loongson GMAC and GNET devices are based on the DW GMAC
+	 * v3.50a and v3.73a IP-cores. But the HW designers have changed the
+	 * GMAC_VERSION.SNPSVER field to the custom 0x10 value on the
+	 * network controllers with the multi-channels feature
+	 * available to emphasize the differences: multiple DMA-channels,
+	 * AV feature and GMAC_INT_STATUS CSR flags layout. Get back the
+	 * original value so the correct HW-interface would be selected.
+	 */
+	if (ld->loongson_id == DWMAC_CORE_LS_MULTICHAN) {
+		priv->synopsys_id = DWMAC_CORE_3_70;
+		*dma = dwmac1000_dma_ops;
+		dma->init_chan = loongson_dwmac_dma_init_channel;
+		dma->dma_interrupt = loongson_dwmac_dma_interrupt;
+		mac->dma = dma;
+	}
+
+	priv->dev->priv_flags |= IFF_UNICAST_FLT;
+
+	/* Pre-initialize the respective "mac" fields as it's done in
+	 * dwmac1000_setup()
+	 */
+	mac->pcsr = priv->ioaddr;
+	mac->multicast_filter_bins = priv->plat->multicast_filter_bins;
+	mac->unicast_filter_entries = priv->plat->unicast_filter_entries;
+	mac->mcast_bits_log2 = 0;
+
+	if (mac->multicast_filter_bins)
+		mac->mcast_bits_log2 = ilog2(mac->multicast_filter_bins);
+
+	/* Loongson GMAC doesn't support the flow control. LS2K2000
+	 * GNET doesn't support the half-duplex link mode.
+	 */
+	if (pdev->device == PCI_DEVICE_ID_LOONGSON_GMAC) {
+		mac->link.caps = MAC_10 | MAC_100 | MAC_1000;
+	} else {
+		if (ld->loongson_id == DWMAC_CORE_LS_MULTICHAN)
+			mac->link.caps = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
+					 MAC_10 | MAC_100 | MAC_1000;
+		else
+			mac->link.caps = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
+					 MAC_10FD | MAC_100FD | MAC_1000FD;
+	}
+
+	mac->link.duplex = GMAC_CONTROL_DM;
+	mac->link.speed10 = GMAC_CONTROL_PS;
+	mac->link.speed100 = GMAC_CONTROL_PS | GMAC_CONTROL_FES;
+	mac->link.speed1000 = 0;
+	mac->link.speed_mask = GMAC_CONTROL_PS | GMAC_CONTROL_FES;
+	mac->mii.addr = GMAC_MII_ADDR;
+	mac->mii.data = GMAC_MII_DATA;
+	mac->mii.addr_shift = 11;
+	mac->mii.addr_mask = 0x0000F800;
+	mac->mii.reg_shift = 6;
+	mac->mii.reg_mask = 0x000007C0;
+	mac->mii.clk_csr_shift = 2;
+	mac->mii.clk_csr_mask = GENMASK(5, 2);
+
+	return mac;
+}
+
+static int loongson_dwmac_msi_config(struct pci_dev *pdev,
+				     struct plat_stmmacenet_data *plat,
+				     struct stmmac_resources *res)
+{
+	int i, ret, vecs;
+
+	vecs = roundup_pow_of_two(CHANNEL_NUM * 2 + 1);
+	ret = pci_alloc_irq_vectors(pdev, vecs, vecs, PCI_IRQ_MSI);
+	if (ret < 0) {
+		dev_warn(&pdev->dev, "Failed to allocate MSI IRQs\n");
+		return ret;
+	}
+
+	res->irq = pci_irq_vector(pdev, 0);
+
+	for (i = 0; i < plat->rx_queues_to_use; i++) {
+		res->rx_irq[CHANNEL_NUM - 1 - i] =
+			pci_irq_vector(pdev, 1 + i * 2);
+	}
+
+	for (i = 0; i < plat->tx_queues_to_use; i++) {
+		res->tx_irq[CHANNEL_NUM - 1 - i] =
+			pci_irq_vector(pdev, 2 + i * 2);
+	}
+
+	plat->flags |= STMMAC_FLAG_MULTI_MSI_EN;
+
+	return 0;
+}
+
+static void loongson_dwmac_msi_clear(struct pci_dev *pdev)
+{
+	pci_free_irq_vectors(pdev);
+}
+
+static int loongson_dwmac_dt_config(struct pci_dev *pdev,
+				    struct plat_stmmacenet_data *plat,
+				    struct stmmac_resources *res)
+{
+	struct device_node *np = dev_of_node(&pdev->dev);
+	int ret;
+
+	plat->mdio_node = of_get_child_by_name(np, "mdio");
+	if (plat->mdio_node) {
+		dev_info(&pdev->dev, "Found MDIO subnode\n");
+		plat->mdio_bus_data->needs_reset = true;
+	}
+
+	ret = of_alias_get_id(np, "ethernet");
+	if (ret >= 0)
+		plat->bus_id = ret;
+
+	res->irq = of_irq_get_byname(np, "macirq");
+	if (res->irq < 0) {
+		dev_err(&pdev->dev, "IRQ macirq not found\n");
+		ret = -ENODEV;
+		goto err_put_node;
+	}
+
+	res->wol_irq = of_irq_get_byname(np, "eth_wake_irq");
+	if (res->wol_irq < 0) {
+		dev_info(&pdev->dev,
+			 "IRQ eth_wake_irq not found, using macirq\n");
+		res->wol_irq = res->irq;
+	}
+
+	res->lpi_irq = of_irq_get_byname(np, "eth_lpi");
+	if (res->lpi_irq < 0) {
+		dev_err(&pdev->dev, "IRQ eth_lpi not found\n");
+		ret = -ENODEV;
+		goto err_put_node;
+	}
+
+	ret = device_get_phy_mode(&pdev->dev);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "phy_mode not found\n");
+		ret = -ENODEV;
+		goto err_put_node;
+	}
+
+	plat->phy_interface = ret;
+
+	return 0;
+
+err_put_node:
+	of_node_put(plat->mdio_node);
+
+	return ret;
+}
+
+static void loongson_dwmac_dt_clear(struct pci_dev *pdev,
+				    struct plat_stmmacenet_data *plat)
+{
+	of_node_put(plat->mdio_node);
+}
+
+static int loongson_dwmac_acpi_config(struct pci_dev *pdev,
+				      struct plat_stmmacenet_data *plat,
+				      struct stmmac_resources *res)
+{
+	if (!pdev->irq)
+		return -EINVAL;
+
+	res->irq = pdev->irq;
+
+	return 0;
+}
+
+static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	struct plat_stmmacenet_data *plat;
+	struct stmmac_pci_info *info;
+	struct stmmac_resources res;
+	struct loongson_data *ld;
+	int ret, i;
+
 	plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL);
 	if (!plat)
 		return -ENOMEM;
@@ -69,25 +534,23 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id
 	if (!plat->mdio_bus_data)
 		return -ENOMEM;
 
-	plat->mdio_node = of_get_child_by_name(np, "mdio");
-	if (plat->mdio_node) {
-		dev_info(&pdev->dev, "Found MDIO subnode\n");
-		plat->mdio_bus_data->needs_reset = true;
-	}
-
 	plat->dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*plat->dma_cfg), GFP_KERNEL);
-	if (!plat->dma_cfg) {
-		ret = -ENOMEM;
-		goto err_put_node;
-	}
+	if (!plat->dma_cfg)
+		return -ENOMEM;
+
+	ld = devm_kzalloc(&pdev->dev, sizeof(*ld), GFP_KERNEL);
+	if (!ld)
+		return -ENOMEM;
 
 	/* Enable pci device */
 	ret = pci_enable_device(pdev);
 	if (ret) {
 		dev_err(&pdev->dev, "%s: ERROR: failed to enable device\n", __func__);
-		goto err_put_node;
+		return ret;
 	}
 
+	pci_set_master(pdev);
+
 	/* Get the base address of device */
 	for (i = 0; i < PCI_STD_NUM_BARS; i++) {
 		if (pci_resource_len(pdev, i) == 0)
@@ -98,59 +561,43 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id
 		break;
 	}
 
-	plat->bus_id = of_alias_get_id(np, "ethernet");
-	if (plat->bus_id < 0)
-		plat->bus_id = pci_dev_id(pdev);
-
-	phy_mode = device_get_phy_mode(&pdev->dev);
-	if (phy_mode < 0) {
-		dev_err(&pdev->dev, "phy_mode not found\n");
-		ret = phy_mode;
-		goto err_disable_device;
-	}
-
-	plat->phy_interface = phy_mode;
-	plat->mac_interface = PHY_INTERFACE_MODE_GMII;
-
-	pci_set_master(pdev);
-
-	loongson_default_data(plat);
-	pci_enable_msi(pdev);
 	memset(&res, 0, sizeof(res));
 	res.addr = pcim_iomap_table(pdev)[0];
 
-	res.irq = of_irq_get_byname(np, "macirq");
-	if (res.irq < 0) {
-		dev_err(&pdev->dev, "IRQ macirq not found\n");
-		ret = -ENODEV;
-		goto err_disable_msi;
-	}
+	plat->bsp_priv = ld;
+	plat->setup = loongson_dwmac_setup;
+	ld->dev = &pdev->dev;
+	ld->loongson_id = readl(res.addr + GMAC_VERSION) & 0xff;
 
-	res.wol_irq = of_irq_get_byname(np, "eth_wake_irq");
-	if (res.wol_irq < 0) {
-		dev_info(&pdev->dev, "IRQ eth_wake_irq not found, using macirq\n");
-		res.wol_irq = res.irq;
-	}
+	info = (struct stmmac_pci_info *)id->driver_data;
+	ret = info->setup(pdev, plat);
+	if (ret)
+		goto err_disable_device;
 
-	res.lpi_irq = of_irq_get_byname(np, "eth_lpi");
-	if (res.lpi_irq < 0) {
-		dev_err(&pdev->dev, "IRQ eth_lpi not found\n");
-		ret = -ENODEV;
-		goto err_disable_msi;
-	}
+	if (dev_of_node(&pdev->dev))
+		ret = loongson_dwmac_dt_config(pdev, plat, &res);
+	else
+		ret = loongson_dwmac_acpi_config(pdev, plat, &res);
+	if (ret)
+		goto err_disable_device;
+
+	/* Use the common MAC IRQ if per-channel MSIs allocation failed */
+	if (ld->loongson_id == DWMAC_CORE_LS_MULTICHAN)
+		loongson_dwmac_msi_config(pdev, plat, &res);
 
 	ret = stmmac_dvr_probe(&pdev->dev, plat, &res);
 	if (ret)
-		goto err_disable_msi;
+		goto err_plat_clear;
 
-	return ret;
+	return 0;
 
-err_disable_msi:
-	pci_disable_msi(pdev);
+err_plat_clear:
+	if (dev_of_node(&pdev->dev))
+		loongson_dwmac_dt_clear(pdev, plat);
+	if (ld->loongson_id == DWMAC_CORE_LS_MULTICHAN)
+		loongson_dwmac_msi_clear(pdev);
 err_disable_device:
 	pci_disable_device(pdev);
-err_put_node:
-	of_node_put(plat->mdio_node);
 	return ret;
 }
 
@@ -158,11 +605,18 @@ static void loongson_dwmac_remove(struct pci_dev *pdev)
 {
 	struct net_device *ndev = dev_get_drvdata(&pdev->dev);
 	struct stmmac_priv *priv = netdev_priv(ndev);
+	struct loongson_data *ld;
 	int i;
 
-	of_node_put(priv->plat->mdio_node);
+	ld = priv->plat->bsp_priv;
 	stmmac_dvr_remove(&pdev->dev);
 
+	if (dev_of_node(&pdev->dev))
+		loongson_dwmac_dt_clear(pdev, priv->plat);
+
+	if (ld->loongson_id == DWMAC_CORE_LS_MULTICHAN)
+		loongson_dwmac_msi_clear(pdev);
+
 	for (i = 0; i < PCI_STD_NUM_BARS; i++) {
 		if (pci_resource_len(pdev, i) == 0)
 			continue;
@@ -170,7 +624,6 @@ static void loongson_dwmac_remove(struct pci_dev *pdev)
 		break;
 	}
 
-	pci_disable_msi(pdev);
 	pci_disable_device(pdev);
 }
 
@@ -213,7 +666,8 @@ static SIMPLE_DEV_PM_OPS(loongson_dwmac_pm_ops, loongson_dwmac_suspend,
 			 loongson_dwmac_resume);
 
 static const struct pci_device_id loongson_dwmac_id_table[] = {
-	{ PCI_VDEVICE(LOONGSON, 0x7a03) },
+	{ PCI_DEVICE_DATA(LOONGSON, GMAC, &loongson_gmac_pci_info) },
+	{ PCI_DEVICE_DATA(LOONGSON, GNET, &loongson_gnet_pci_info) },
 	{}
 };
 MODULE_DEVICE_TABLE(pci, loongson_dwmac_id_table);
@@ -232,4 +686,5 @@ module_pci_driver(loongson_dwmac_driver);
 
 MODULE_DESCRIPTION("Loongson DWMAC PCI driver");
 MODULE_AUTHOR("Qing Zhang <zhangqing@loongson.cn>");
+MODULE_AUTHOR("Yanteng Si <siyanteng@loongson.cn>");
 MODULE_LICENSE("GPL v2");