1 files changed, 24 insertions, 6 deletions

diff --git a/drivers/net/ethernet/marvell/sky2.c b/drivers/net/ethernet/marvell/sky2.c
index f3a5fa84860f..49486c10ef81 100644
--- a/drivers/net/ethernet/marvell/sky2.c
+++ b/drivers/net/ethernet/marvell/sky2.c
@@ -46,6 +46,7 @@
 #include <linux/mii.h>
 #include <linux/of_device.h>
 #include <linux/of_net.h>
+#include <linux/dmi.h>
 
 #include <asm/irq.h>
 
@@ -93,7 +94,7 @@ static int copybreak __read_mostly = 128;
 module_param(copybreak, int, 0);
 MODULE_PARM_DESC(copybreak, "Receive copy threshold");
 
-static int disable_msi = 0;
+static int disable_msi = -1;
 module_param(disable_msi, int, 0);
 MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)");
 
@@ -1138,9 +1139,6 @@ static inline void sky2_put_idx(struct sky2_hw *hw, unsigned q, u16 idx)
 	/* Make sure write' to descriptors are complete before we tell hardware */
 	wmb();
 	sky2_write16(hw, Y2_QADDR(q, PREF_UNIT_PUT_IDX), idx);
-
-	/* Synchronize I/O on since next processor may write to tail */
-	mmiowb();
 }
 
 
@@ -1353,7 +1351,6 @@ stopped:
 
 	/* reset the Rx prefetch unit */
 	sky2_write32(hw, Y2_QADDR(rxq, PREF_UNIT_CTRL), PREF_UNIT_RST_SET);
-	mmiowb();
 }
 
 /* Clean out receive buffer area, assumes receiver hardware stopped */
@@ -4917,6 +4914,24 @@ static const char *sky2_name(u8 chipid, char *buf, int sz)
 	return buf;
 }
 
+static const struct dmi_system_id msi_blacklist[] = {
+	{
+		.ident = "Dell Inspiron 1545",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1545"),
+		},
+	},
+	{
+		.ident = "Gateway P-79",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Gateway"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "P-79"),
+		},
+	},
+	{}
+};
+
 static int sky2_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	struct net_device *dev, *dev1;
@@ -5028,6 +5043,9 @@ static int sky2_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		goto err_out_free_pci;
 	}
 
+	if (disable_msi == -1)
+		disable_msi = !!dmi_check_system(msi_blacklist);
+
 	if (!disable_msi && pci_enable_msi(pdev) == 0) {
 		err = sky2_test_msi(hw);
 		if (err) {
@@ -5073,7 +5091,7 @@ static int sky2_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	INIT_WORK(&hw->restart_work, sky2_restart);
 
 	pci_set_drvdata(pdev, hw);
-	pdev->d3_delay = 200;
+	pdev->d3_delay = 300;
 
 	return 0;