diff options
Diffstat (limited to 'drivers/net/ethernet/intel')
| -rw-r--r-- | drivers/net/ethernet/intel/igc/igc_defines.h | 27 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/igc/igc_i225.c | 100 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/igc/igc_i225.h | 1 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/igc/igc_mac.c | 5 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/igc/igc_regs.h | 6 |
5 files changed, 139 insertions, 0 deletions
diff --git a/drivers/net/ethernet/intel/igc/igc_defines.h b/drivers/net/ethernet/intel/igc/igc_defines.h index ee7fa1c062a0..ed0e560daaae 100644 --- a/drivers/net/ethernet/intel/igc/igc_defines.h +++ b/drivers/net/ethernet/intel/igc/igc_defines.h @@ -521,4 +521,31 @@ #define IGC_EEER_LPI_FC 0x00040000 /* EEER Ena on Flow Cntrl */ #define IGC_EEE_SU_LPI_CLK_STP 0x00800000 /* EEE LPI Clock Stop */ +/* LTR defines */ +#define IGC_LTRC_EEEMS_EN 0x00000020 /* Enable EEE LTR max send */ +#define IGC_RXPBS_SIZE_I225_MASK 0x0000003F /* Rx packet buffer size */ +#define IGC_TW_SYSTEM_1000_MASK 0x000000FF +/* Minimum time for 100BASE-T where no data will be transmit following move out + * of EEE LPI Tx state + */ +#define IGC_TW_SYSTEM_100_MASK 0x0000FF00 +#define IGC_TW_SYSTEM_100_SHIFT 8 +#define IGC_DMACR_DMAC_EN 0x80000000 /* Enable DMA Coalescing */ +#define IGC_DMACR_DMACTHR_MASK 0x00FF0000 +#define IGC_DMACR_DMACTHR_SHIFT 16 +/* Reg val to set scale to 1024 nsec */ +#define IGC_LTRMINV_SCALE_1024 2 +/* Reg val to set scale to 32768 nsec */ +#define IGC_LTRMINV_SCALE_32768 3 +/* Reg val to set scale to 1024 nsec */ +#define IGC_LTRMAXV_SCALE_1024 2 +/* Reg val to set scale to 32768 nsec */ +#define IGC_LTRMAXV_SCALE_32768 3 +#define IGC_LTRMINV_LTRV_MASK 0x000003FF /* LTR minimum value */ +#define IGC_LTRMAXV_LTRV_MASK 0x000003FF /* LTR maximum value */ +#define IGC_LTRMINV_LSNP_REQ 0x00008000 /* LTR Snoop Requirement */ +#define IGC_LTRMINV_SCALE_SHIFT 10 +#define IGC_LTRMAXV_LSNP_REQ 0x00008000 /* LTR Snoop Requirement */ +#define IGC_LTRMAXV_SCALE_SHIFT 10 + #endif /* _IGC_DEFINES_H_ */ diff --git a/drivers/net/ethernet/intel/igc/igc_i225.c b/drivers/net/ethernet/intel/igc/igc_i225.c index 3a4e982edb67..8b67d9b49a83 100644 --- a/drivers/net/ethernet/intel/igc/igc_i225.c +++ b/drivers/net/ethernet/intel/igc/igc_i225.c @@ -544,3 +544,103 @@ s32 igc_set_eee_i225(struct igc_hw *hw, bool adv2p5G, bool adv1G, return IGC_SUCCESS; } + +/* igc_set_ltr_i225 - Set Latency Tolerance Reporting thresholds + * @hw: pointer to the HW structure + * @link: bool indicating link status + * + * Set the LTR thresholds based on the link speed (Mbps), EEE, and DMAC + * settings, otherwise specify that there is no LTR requirement. + */ +s32 igc_set_ltr_i225(struct igc_hw *hw, bool link) +{ + u32 tw_system, ltrc, ltrv, ltr_min, ltr_max, scale_min, scale_max; + u16 speed, duplex; + s32 size; + + /* If we do not have link, LTR thresholds are zero. */ + if (link) { + hw->mac.ops.get_speed_and_duplex(hw, &speed, &duplex); + + /* Check if using copper interface with EEE enabled or if the + * link speed is 10 Mbps. + */ + if (hw->dev_spec._base.eee_enable && + speed != SPEED_10) { + /* EEE enabled, so send LTRMAX threshold. */ + ltrc = rd32(IGC_LTRC) | + IGC_LTRC_EEEMS_EN; + wr32(IGC_LTRC, ltrc); + + /* Calculate tw_system (nsec). */ + if (speed == SPEED_100) { + tw_system = ((rd32(IGC_EEE_SU) & + IGC_TW_SYSTEM_100_MASK) >> + IGC_TW_SYSTEM_100_SHIFT) * 500; + } else { + tw_system = (rd32(IGC_EEE_SU) & + IGC_TW_SYSTEM_1000_MASK) * 500; + } + } else { + tw_system = 0; + } + + /* Get the Rx packet buffer size. */ + size = rd32(IGC_RXPBS) & + IGC_RXPBS_SIZE_I225_MASK; + + /* Calculations vary based on DMAC settings. */ + if (rd32(IGC_DMACR) & IGC_DMACR_DMAC_EN) { + size -= (rd32(IGC_DMACR) & + IGC_DMACR_DMACTHR_MASK) >> + IGC_DMACR_DMACTHR_SHIFT; + /* Convert size to bits. */ + size *= 1024 * 8; + } else { + /* Convert size to bytes, subtract the MTU, and then + * convert the size to bits. + */ + size *= 1024; + size *= 8; + } + + if (size < 0) { + hw_dbg("Invalid effective Rx buffer size %d\n", + size); + return -IGC_ERR_CONFIG; + } + + /* Calculate the thresholds. Since speed is in Mbps, simplify + * the calculation by multiplying size/speed by 1000 for result + * to be in nsec before dividing by the scale in nsec. Set the + * scale such that the LTR threshold fits in the register. + */ + ltr_min = (1000 * size) / speed; + ltr_max = ltr_min + tw_system; + scale_min = (ltr_min / 1024) < 1024 ? IGC_LTRMINV_SCALE_1024 : + IGC_LTRMINV_SCALE_32768; + scale_max = (ltr_max / 1024) < 1024 ? IGC_LTRMAXV_SCALE_1024 : + IGC_LTRMAXV_SCALE_32768; + ltr_min /= scale_min == IGC_LTRMINV_SCALE_1024 ? 1024 : 32768; + ltr_min -= 1; + ltr_max /= scale_max == IGC_LTRMAXV_SCALE_1024 ? 1024 : 32768; + ltr_max -= 1; + + /* Only write the LTR thresholds if they differ from before. */ + ltrv = rd32(IGC_LTRMINV); + if (ltr_min != (ltrv & IGC_LTRMINV_LTRV_MASK)) { + ltrv = IGC_LTRMINV_LSNP_REQ | ltr_min | + (scale_min << IGC_LTRMINV_SCALE_SHIFT); + wr32(IGC_LTRMINV, ltrv); + } + + ltrv = rd32(IGC_LTRMAXV); + if (ltr_max != (ltrv & IGC_LTRMAXV_LTRV_MASK)) { + ltrv = IGC_LTRMAXV_LSNP_REQ | ltr_max | + (scale_min << IGC_LTRMAXV_SCALE_SHIFT); + wr32(IGC_LTRMAXV, ltrv); + } + } + + return IGC_SUCCESS; +} diff --git a/drivers/net/ethernet/intel/igc/igc_i225.h b/drivers/net/ethernet/intel/igc/igc_i225.h index 04759e076a9e..dae47e4f16b0 100644 --- a/drivers/net/ethernet/intel/igc/igc_i225.h +++ b/drivers/net/ethernet/intel/igc/igc_i225.h @@ -11,5 +11,6 @@ s32 igc_init_nvm_params_i225(struct igc_hw *hw); bool igc_get_flash_presence_i225(struct igc_hw *hw); s32 igc_set_eee_i225(struct igc_hw *hw, bool adv2p5G, bool adv1G, bool adv100M); +s32 igc_set_ltr_i225(struct igc_hw *hw, bool link); #endif diff --git a/drivers/net/ethernet/intel/igc/igc_mac.c b/drivers/net/ethernet/intel/igc/igc_mac.c index 410aeb01de5c..bc077f230f17 100644 --- a/drivers/net/ethernet/intel/igc/igc_mac.c +++ b/drivers/net/ethernet/intel/igc/igc_mac.c @@ -417,6 +417,11 @@ s32 igc_check_for_copper_link(struct igc_hw *hw) hw_dbg("Error configuring flow control\n"); out: + /* Now that we are aware of our link settings, we can set the LTR + * thresholds. + */ + ret_val = igc_set_ltr_i225(hw, link); + return ret_val; } diff --git a/drivers/net/ethernet/intel/igc/igc_regs.h b/drivers/net/ethernet/intel/igc/igc_regs.h index 75e040a5d46f..97f9b928509f 100644 --- a/drivers/net/ethernet/intel/igc/igc_regs.h +++ b/drivers/net/ethernet/intel/igc/igc_regs.h @@ -253,6 +253,12 @@ #define IGC_IPCNFG 0x0E38 /* Internal PHY Configuration */ #define IGC_EEE_SU 0x0E34 /* EEE Setup */ +/* LTR registers */ +#define IGC_LTRC 0x01A0 /* Latency Tolerance Reporting Control */ +#define IGC_DMACR 0x02508 /* DMA Coalescing Control Register */ +#define IGC_LTRMINV 0x5BB0 /* LTR Minimum Value */ +#define IGC_LTRMAXV 0x5BB4 /* LTR Maximum Value */ + /* forward declaration */ struct igc_hw; u32 igc_rd32(struct igc_hw *hw, u32 reg); |