diff options
Diffstat (limited to 'drivers/net/ethernet/intel/igc/igc_ptp.c')
| -rw-r--r-- | drivers/net/ethernet/intel/igc/igc_ptp.c | 182 |
1 files changed, 181 insertions, 1 deletions
diff --git a/drivers/net/ethernet/intel/igc/igc_ptp.c b/drivers/net/ethernet/intel/igc/igc_ptp.c index 69617d2c1be2..0f021909b430 100644 --- a/drivers/net/ethernet/intel/igc/igc_ptp.c +++ b/drivers/net/ethernet/intel/igc/igc_ptp.c @@ -9,6 +9,8 @@ #include <linux/ptp_classify.h> #include <linux/clocksource.h> #include <linux/ktime.h> +#include <linux/delay.h> +#include <linux/iopoll.h> #define INCVALUE_MASK 0x7fffffff #define ISGN 0x80000000 @@ -16,6 +18,9 @@ #define IGC_SYSTIM_OVERFLOW_PERIOD (HZ * 60 * 9) #define IGC_PTP_TX_TIMEOUT (HZ * 15) +#define IGC_PTM_STAT_SLEEP 2 +#define IGC_PTM_STAT_TIMEOUT 100 + /* SYSTIM read access for I225 */ void igc_ptp_read(struct igc_adapter *adapter, struct timespec64 *ts) { @@ -752,6 +757,147 @@ int igc_ptp_get_ts_config(struct net_device *netdev, struct ifreq *ifr) -EFAULT : 0; } +/* The two conditions below must be met for cross timestamping via + * PCIe PTM: + * + * 1. We have an way to convert the timestamps in the PTM messages + * to something related to the system clocks (right now, only + * X86 systems with support for the Always Running Timer allow that); + * + * 2. We have PTM enabled in the path from the device to the PCIe root port. + */ +static bool igc_is_crosststamp_supported(struct igc_adapter *adapter) +{ + return IS_ENABLED(CONFIG_X86_TSC) ? pcie_ptm_enabled(adapter->pdev) : false; +} + +static struct system_counterval_t igc_device_tstamp_to_system(u64 tstamp) +{ +#if IS_ENABLED(CONFIG_X86_TSC) + return convert_art_ns_to_tsc(tstamp); +#else + return (struct system_counterval_t) { }; +#endif +} + +static void igc_ptm_log_error(struct igc_adapter *adapter, u32 ptm_stat) +{ + struct net_device *netdev = adapter->netdev; + + switch (ptm_stat) { + case IGC_PTM_STAT_RET_ERR: + netdev_err(netdev, "PTM Error: Root port timeout\n"); + break; + case IGC_PTM_STAT_BAD_PTM_RES: + netdev_err(netdev, "PTM Error: Bad response, PTM Response Data expected\n"); + break; + case IGC_PTM_STAT_T4M1_OVFL: + netdev_err(netdev, "PTM Error: T4 minus T1 overflow\n"); + break; + case IGC_PTM_STAT_ADJUST_1ST: + netdev_err(netdev, "PTM Error: 1588 timer adjusted during first PTM cycle\n"); + break; + case IGC_PTM_STAT_ADJUST_CYC: + netdev_err(netdev, "PTM Error: 1588 timer adjusted during non-first PTM cycle\n"); + break; + default: + netdev_err(netdev, "PTM Error: Unknown error (%#x)\n", ptm_stat); + break; + } +} + +static int igc_phc_get_syncdevicetime(ktime_t *device, + struct system_counterval_t *system, + void *ctx) +{ + u32 stat, t2_curr_h, t2_curr_l, ctrl; + struct igc_adapter *adapter = ctx; + struct igc_hw *hw = &adapter->hw; + int err, count = 100; + ktime_t t1, t2_curr; + + /* Get a snapshot of system clocks to use as historic value. */ + ktime_get_snapshot(&adapter->snapshot); + + do { + /* Doing this in a loop because in the event of a + * badly timed (ha!) system clock adjustment, we may + * get PTM errors from the PCI root, but these errors + * are transitory. Repeating the process returns valid + * data eventually. + */ + + /* To "manually" start the PTM cycle we need to clear and + * then set again the TRIG bit. + */ + ctrl = rd32(IGC_PTM_CTRL); + ctrl &= ~IGC_PTM_CTRL_TRIG; + wr32(IGC_PTM_CTRL, ctrl); + ctrl |= IGC_PTM_CTRL_TRIG; + wr32(IGC_PTM_CTRL, ctrl); + + /* The cycle only starts "for real" when software notifies + * that it has read the registers, this is done by setting + * VALID bit. + */ + wr32(IGC_PTM_STAT, IGC_PTM_STAT_VALID); + + err = readx_poll_timeout(rd32, IGC_PTM_STAT, stat, + stat, IGC_PTM_STAT_SLEEP, + IGC_PTM_STAT_TIMEOUT); + if (err < 0) { + netdev_err(adapter->netdev, "Timeout reading IGC_PTM_STAT register\n"); + return err; + } + + if ((stat & IGC_PTM_STAT_VALID) == IGC_PTM_STAT_VALID) + break; + + if (stat & ~IGC_PTM_STAT_VALID) { + /* An error occurred, log it. */ + igc_ptm_log_error(adapter, stat); + /* The STAT register is write-1-to-clear (W1C), + * so write the previous error status to clear it. + */ + wr32(IGC_PTM_STAT, stat); + continue; + } + } while (--count); + + if (!count) { + netdev_err(adapter->netdev, "Exceeded number of tries for PTM cycle\n"); + return -ETIMEDOUT; + } + + t1 = ktime_set(rd32(IGC_PTM_T1_TIM0_H), rd32(IGC_PTM_T1_TIM0_L)); + + t2_curr_l = rd32(IGC_PTM_CURR_T2_L); + t2_curr_h = rd32(IGC_PTM_CURR_T2_H); + + /* FIXME: When the register that tells the endianness of the + * PTM registers are implemented, check them here and add the + * appropriate conversion. + */ + t2_curr_h = swab32(t2_curr_h); + + t2_curr = ((s64)t2_curr_h << 32 | t2_curr_l); + + *device = t1; + *system = igc_device_tstamp_to_system(t2_curr); + + return 0; +} + +static int igc_ptp_getcrosststamp(struct ptp_clock_info *ptp, + struct system_device_crosststamp *cts) +{ + struct igc_adapter *adapter = container_of(ptp, struct igc_adapter, + ptp_caps); + + return get_device_system_crosststamp(igc_phc_get_syncdevicetime, + adapter, &adapter->snapshot, cts); +} + /** * igc_ptp_init - Initialize PTP functionality * @adapter: Board private structure @@ -788,6 +934,11 @@ void igc_ptp_init(struct igc_adapter *adapter) adapter->ptp_caps.n_per_out = IGC_N_PEROUT; adapter->ptp_caps.n_pins = IGC_N_SDP; adapter->ptp_caps.verify = igc_ptp_verify_pin; + + if (!igc_is_crosststamp_supported(adapter)) + break; + + adapter->ptp_caps.getcrosststamp = igc_ptp_getcrosststamp; break; default: adapter->ptp_clock = NULL; @@ -849,7 +1000,8 @@ void igc_ptp_suspend(struct igc_adapter *adapter) adapter->ptp_tx_skb = NULL; clear_bit_unlock(__IGC_PTP_TX_IN_PROGRESS, &adapter->state); - igc_ptp_time_save(adapter); + if (pci_device_is_present(adapter->pdev)) + igc_ptp_time_save(adapter); } /** @@ -878,7 +1030,9 @@ void igc_ptp_stop(struct igc_adapter *adapter) void igc_ptp_reset(struct igc_adapter *adapter) { struct igc_hw *hw = &adapter->hw; + u32 cycle_ctrl, ctrl; unsigned long flags; + u32 timadj; /* reset the tstamp_config */ igc_ptp_set_timestamp_mode(adapter, &adapter->tstamp_config); @@ -887,12 +1041,38 @@ void igc_ptp_reset(struct igc_adapter *adapter) switch (adapter->hw.mac.type) { case igc_i225: + timadj = rd32(IGC_TIMADJ); + timadj |= IGC_TIMADJ_ADJUST_METH; + wr32(IGC_TIMADJ, timadj); + wr32(IGC_TSAUXC, 0x0); wr32(IGC_TSSDP, 0x0); wr32(IGC_TSIM, IGC_TSICR_INTERRUPTS | (adapter->pps_sys_wrap_on ? IGC_TSICR_SYS_WRAP : 0)); wr32(IGC_IMS, IGC_IMS_TS); + + if (!igc_is_crosststamp_supported(adapter)) + break; + + wr32(IGC_PCIE_DIG_DELAY, IGC_PCIE_DIG_DELAY_DEFAULT); + wr32(IGC_PCIE_PHY_DELAY, IGC_PCIE_PHY_DELAY_DEFAULT); + + cycle_ctrl = IGC_PTM_CYCLE_CTRL_CYC_TIME(IGC_PTM_CYC_TIME_DEFAULT); + + wr32(IGC_PTM_CYCLE_CTRL, cycle_ctrl); + + ctrl = IGC_PTM_CTRL_EN | + IGC_PTM_CTRL_START_NOW | + IGC_PTM_CTRL_SHRT_CYC(IGC_PTM_SHORT_CYC_DEFAULT) | + IGC_PTM_CTRL_PTM_TO(IGC_PTM_TIMEOUT_DEFAULT) | + IGC_PTM_CTRL_TRIG; + + wr32(IGC_PTM_CTRL, ctrl); + + /* Force the first cycle to run. */ + wr32(IGC_PTM_STAT, IGC_PTM_STAT_VALID); + break; default: /* No work to do. */ |