diff options
Diffstat (limited to 'drivers/net/ethernet/intel/i40evf/i40e_virtchnl.h')
| -rw-r--r-- | drivers/net/ethernet/intel/i40evf/i40e_virtchnl.h | 449 |
1 files changed, 0 insertions, 449 deletions
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_virtchnl.h b/drivers/net/ethernet/intel/i40evf/i40e_virtchnl.h deleted file mode 100644 index c5ad0388c3d5..000000000000 --- a/drivers/net/ethernet/intel/i40evf/i40e_virtchnl.h +++ /dev/null @@ -1,449 +0,0 @@ -/******************************************************************************* - * - * Intel Ethernet Controller XL710 Family Linux Virtual Function Driver - * Copyright(c) 2013 - 2014 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along - * with this program. If not, see <http://www.gnu.org/licenses/>. - * - * The full GNU General Public License is included in this distribution in - * the file called "COPYING". - * - * Contact Information: - * e1000-devel Mailing List <[email protected]> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - ******************************************************************************/ - -#ifndef _I40E_VIRTCHNL_H_ -#define _I40E_VIRTCHNL_H_ - -#include "i40e_type.h" - -/* Description: - * This header file describes the VF-PF communication protocol used - * by the various i40e drivers. - * - * Admin queue buffer usage: - * desc->opcode is always i40e_aqc_opc_send_msg_to_pf - * flags, retval, datalen, and data addr are all used normally. - * Firmware copies the cookie fields when sending messages between the PF and - * VF, but uses all other fields internally. Due to this limitation, we - * must send all messages as "indirect", i.e. using an external buffer. - * - * All the vsi indexes are relative to the VF. Each VF can have maximum of - * three VSIs. All the queue indexes are relative to the VSI. Each VF can - * have a maximum of sixteen queues for all of its VSIs. - * - * The PF is required to return a status code in v_retval for all messages - * except RESET_VF, which does not require any response. The return value is of - * i40e_status_code type, defined in the i40e_type.h. - * - * In general, VF driver initialization should roughly follow the order of these - * opcodes. The VF driver must first validate the API version of the PF driver, - * then request a reset, then get resources, then configure queues and - * interrupts. After these operations are complete, the VF driver may start - * its queues, optionally add MAC and VLAN filters, and process traffic. - */ - -/* Opcodes for VF-PF communication. These are placed in the v_opcode field - * of the virtchnl_msg structure. - */ -enum i40e_virtchnl_ops { -/* The PF sends status change events to VFs using - * the I40E_VIRTCHNL_OP_EVENT opcode. - * VFs send requests to the PF using the other ops. - */ - I40E_VIRTCHNL_OP_UNKNOWN = 0, - I40E_VIRTCHNL_OP_VERSION = 1, /* must ALWAYS be 1 */ - I40E_VIRTCHNL_OP_RESET_VF = 2, - I40E_VIRTCHNL_OP_GET_VF_RESOURCES = 3, - I40E_VIRTCHNL_OP_CONFIG_TX_QUEUE = 4, - I40E_VIRTCHNL_OP_CONFIG_RX_QUEUE = 5, - I40E_VIRTCHNL_OP_CONFIG_VSI_QUEUES = 6, - I40E_VIRTCHNL_OP_CONFIG_IRQ_MAP = 7, - I40E_VIRTCHNL_OP_ENABLE_QUEUES = 8, - I40E_VIRTCHNL_OP_DISABLE_QUEUES = 9, - I40E_VIRTCHNL_OP_ADD_ETHER_ADDRESS = 10, - I40E_VIRTCHNL_OP_DEL_ETHER_ADDRESS = 11, - I40E_VIRTCHNL_OP_ADD_VLAN = 12, - I40E_VIRTCHNL_OP_DEL_VLAN = 13, - I40E_VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE = 14, - I40E_VIRTCHNL_OP_GET_STATS = 15, - I40E_VIRTCHNL_OP_FCOE = 16, - I40E_VIRTCHNL_OP_EVENT = 17, /* must ALWAYS be 17 */ - I40E_VIRTCHNL_OP_IWARP = 20, - I40E_VIRTCHNL_OP_CONFIG_IWARP_IRQ_MAP = 21, - I40E_VIRTCHNL_OP_RELEASE_IWARP_IRQ_MAP = 22, - I40E_VIRTCHNL_OP_CONFIG_RSS_KEY = 23, - I40E_VIRTCHNL_OP_CONFIG_RSS_LUT = 24, - I40E_VIRTCHNL_OP_GET_RSS_HENA_CAPS = 25, - I40E_VIRTCHNL_OP_SET_RSS_HENA = 26, - -}; - -/* Virtual channel message descriptor. This overlays the admin queue - * descriptor. All other data is passed in external buffers. - */ - -struct i40e_virtchnl_msg { - u8 pad[8]; /* AQ flags/opcode/len/retval fields */ - enum i40e_virtchnl_ops v_opcode; /* avoid confusion with desc->opcode */ - i40e_status v_retval; /* ditto for desc->retval */ - u32 vfid; /* used by PF when sending to VF */ -}; - -/* Message descriptions and data structures.*/ - -/* I40E_VIRTCHNL_OP_VERSION - * VF posts its version number to the PF. PF responds with its version number - * in the same format, along with a return code. - * Reply from PF has its major/minor versions also in param0 and param1. - * If there is a major version mismatch, then the VF cannot operate. - * If there is a minor version mismatch, then the VF can operate but should - * add a warning to the system log. - * - * This enum element MUST always be specified as == 1, regardless of other - * changes in the API. The PF must always respond to this message without - * error regardless of version mismatch. - */ -#define I40E_VIRTCHNL_VERSION_MAJOR 1 -#define I40E_VIRTCHNL_VERSION_MINOR 1 -#define I40E_VIRTCHNL_VERSION_MINOR_NO_VF_CAPS 0 - -struct i40e_virtchnl_version_info { - u32 major; - u32 minor; -}; - -/* I40E_VIRTCHNL_OP_RESET_VF - * VF sends this request to PF with no parameters - * PF does NOT respond! VF driver must delay then poll VFGEN_RSTAT register - * until reset completion is indicated. The admin queue must be reinitialized - * after this operation. - * - * When reset is complete, PF must ensure that all queues in all VSIs associated - * with the VF are stopped, all queue configurations in the HMC are set to 0, - * and all MAC and VLAN filters (except the default MAC address) on all VSIs - * are cleared. - */ - -/* I40E_VIRTCHNL_OP_GET_VF_RESOURCES - * Version 1.0 VF sends this request to PF with no parameters - * Version 1.1 VF sends this request to PF with u32 bitmap of its capabilities - * PF responds with an indirect message containing - * i40e_virtchnl_vf_resource and one or more - * i40e_virtchnl_vsi_resource structures. - */ - -struct i40e_virtchnl_vsi_resource { - u16 vsi_id; - u16 num_queue_pairs; - enum i40e_vsi_type vsi_type; - u16 qset_handle; - u8 default_mac_addr[ETH_ALEN]; -}; -/* VF offload flags */ -#define I40E_VIRTCHNL_VF_OFFLOAD_L2 0x00000001 -#define I40E_VIRTCHNL_VF_OFFLOAD_IWARP 0x00000002 -#define I40E_VIRTCHNL_VF_OFFLOAD_FCOE 0x00000004 -#define I40E_VIRTCHNL_VF_OFFLOAD_RSS_AQ 0x00000008 -#define I40E_VIRTCHNL_VF_OFFLOAD_RSS_REG 0x00000010 -#define I40E_VIRTCHNL_VF_OFFLOAD_WB_ON_ITR 0x00000020 -#define I40E_VIRTCHNL_VF_OFFLOAD_VLAN 0x00010000 -#define I40E_VIRTCHNL_VF_OFFLOAD_RX_POLLING 0x00020000 -#define I40E_VIRTCHNL_VF_OFFLOAD_RSS_PCTYPE_V2 0x00040000 -#define I40E_VIRTCHNL_VF_OFFLOAD_RSS_PF 0X00080000 -#define I40E_VIRTCHNL_VF_OFFLOAD_ENCAP 0X00100000 -#define I40E_VIRTCHNL_VF_OFFLOAD_ENCAP_CSUM 0X00200000 - -#define I40E_VF_BASE_MODE_OFFLOADS (I40E_VIRTCHNL_VF_OFFLOAD_L2 | \ - I40E_VIRTCHNL_VF_OFFLOAD_VLAN | \ - I40E_VIRTCHNL_VF_OFFLOAD_RSS_PF) - -struct i40e_virtchnl_vf_resource { - u16 num_vsis; - u16 num_queue_pairs; - u16 max_vectors; - u16 max_mtu; - - u32 vf_offload_flags; - u32 rss_key_size; - u32 rss_lut_size; - - struct i40e_virtchnl_vsi_resource vsi_res[1]; -}; - -/* I40E_VIRTCHNL_OP_CONFIG_TX_QUEUE - * VF sends this message to set up parameters for one TX queue. - * External data buffer contains one instance of i40e_virtchnl_txq_info. - * PF configures requested queue and returns a status code. - */ - -/* Tx queue config info */ -struct i40e_virtchnl_txq_info { - u16 vsi_id; - u16 queue_id; - u16 ring_len; /* number of descriptors, multiple of 8 */ - u16 headwb_enabled; - u64 dma_ring_addr; - u64 dma_headwb_addr; -}; - -/* I40E_VIRTCHNL_OP_CONFIG_RX_QUEUE - * VF sends this message to set up parameters for one RX queue. - * External data buffer contains one instance of i40e_virtchnl_rxq_info. - * PF configures requested queue and returns a status code. - */ - -/* Rx queue config info */ -struct i40e_virtchnl_rxq_info { - u16 vsi_id; - u16 queue_id; - u32 ring_len; /* number of descriptors, multiple of 32 */ - u16 hdr_size; - u16 splithdr_enabled; - u32 databuffer_size; - u32 max_pkt_size; - u64 dma_ring_addr; - enum i40e_hmc_obj_rx_hsplit_0 rx_split_pos; -}; - -/* I40E_VIRTCHNL_OP_CONFIG_VSI_QUEUES - * VF sends this message to set parameters for all active TX and RX queues - * associated with the specified VSI. - * PF configures queues and returns status. - * If the number of queues specified is greater than the number of queues - * associated with the VSI, an error is returned and no queues are configured. - */ -struct i40e_virtchnl_queue_pair_info { - /* NOTE: vsi_id and queue_id should be identical for both queues. */ - struct i40e_virtchnl_txq_info txq; - struct i40e_virtchnl_rxq_info rxq; -}; - -struct i40e_virtchnl_vsi_queue_config_info { - u16 vsi_id; - u16 num_queue_pairs; - struct i40e_virtchnl_queue_pair_info qpair[1]; -}; - -/* I40E_VIRTCHNL_OP_CONFIG_IRQ_MAP - * VF uses this message to map vectors to queues. - * The rxq_map and txq_map fields are bitmaps used to indicate which queues - * are to be associated with the specified vector. - * The "other" causes are always mapped to vector 0. - * PF configures interrupt mapping and returns status. - */ -struct i40e_virtchnl_vector_map { - u16 vsi_id; - u16 vector_id; - u16 rxq_map; - u16 txq_map; - u16 rxitr_idx; - u16 txitr_idx; -}; - -struct i40e_virtchnl_irq_map_info { - u16 num_vectors; - struct i40e_virtchnl_vector_map vecmap[1]; -}; - -/* I40E_VIRTCHNL_OP_ENABLE_QUEUES - * I40E_VIRTCHNL_OP_DISABLE_QUEUES - * VF sends these message to enable or disable TX/RX queue pairs. - * The queues fields are bitmaps indicating which queues to act upon. - * (Currently, we only support 16 queues per VF, but we make the field - * u32 to allow for expansion.) - * PF performs requested action and returns status. - */ -struct i40e_virtchnl_queue_select { - u16 vsi_id; - u16 pad; - u32 rx_queues; - u32 tx_queues; -}; - -/* I40E_VIRTCHNL_OP_ADD_ETHER_ADDRESS - * VF sends this message in order to add one or more unicast or multicast - * address filters for the specified VSI. - * PF adds the filters and returns status. - */ - -/* I40E_VIRTCHNL_OP_DEL_ETHER_ADDRESS - * VF sends this message in order to remove one or more unicast or multicast - * filters for the specified VSI. - * PF removes the filters and returns status. - */ - -struct i40e_virtchnl_ether_addr { - u8 addr[ETH_ALEN]; - u8 pad[2]; -}; - -struct i40e_virtchnl_ether_addr_list { - u16 vsi_id; - u16 num_elements; - struct i40e_virtchnl_ether_addr list[1]; -}; - -/* I40E_VIRTCHNL_OP_ADD_VLAN - * VF sends this message to add one or more VLAN tag filters for receives. - * PF adds the filters and returns status. - * If a port VLAN is configured by the PF, this operation will return an - * error to the VF. - */ - -/* I40E_VIRTCHNL_OP_DEL_VLAN - * VF sends this message to remove one or more VLAN tag filters for receives. - * PF removes the filters and returns status. - * If a port VLAN is configured by the PF, this operation will return an - * error to the VF. - */ - -struct i40e_virtchnl_vlan_filter_list { - u16 vsi_id; - u16 num_elements; - u16 vlan_id[1]; -}; - -/* I40E_VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE - * VF sends VSI id and flags. - * PF returns status code in retval. - * Note: we assume that broadcast accept mode is always enabled. - */ -struct i40e_virtchnl_promisc_info { - u16 vsi_id; - u16 flags; -}; - -#define I40E_FLAG_VF_UNICAST_PROMISC 0x00000001 -#define I40E_FLAG_VF_MULTICAST_PROMISC 0x00000002 - -/* I40E_VIRTCHNL_OP_GET_STATS - * VF sends this message to request stats for the selected VSI. VF uses - * the i40e_virtchnl_queue_select struct to specify the VSI. The queue_id - * field is ignored by the PF. - * - * PF replies with struct i40e_eth_stats in an external buffer. - */ - -/* I40E_VIRTCHNL_OP_CONFIG_RSS_KEY - * I40E_VIRTCHNL_OP_CONFIG_RSS_LUT - * VF sends these messages to configure RSS. Only supported if both PF - * and VF drivers set the I40E_VIRTCHNL_VF_OFFLOAD_RSS_PF bit during - * configuration negotiation. If this is the case, then the RSS fields in - * the VF resource struct are valid. - * Both the key and LUT are initialized to 0 by the PF, meaning that - * RSS is effectively disabled until set up by the VF. - */ -struct i40e_virtchnl_rss_key { - u16 vsi_id; - u16 key_len; - u8 key[1]; /* RSS hash key, packed bytes */ -}; - -struct i40e_virtchnl_rss_lut { - u16 vsi_id; - u16 lut_entries; - u8 lut[1]; /* RSS lookup table*/ -}; - -/* I40E_VIRTCHNL_OP_GET_RSS_HENA_CAPS - * I40E_VIRTCHNL_OP_SET_RSS_HENA - * VF sends these messages to get and set the hash filter enable bits for RSS. - * By default, the PF sets these to all possible traffic types that the - * hardware supports. The VF can query this value if it wants to change the - * traffic types that are hashed by the hardware. - * Traffic types are defined in the i40e_filter_pctype enum in i40e_type.h - */ -struct i40e_virtchnl_rss_hena { - u64 hena; -}; - -/* I40E_VIRTCHNL_OP_EVENT - * PF sends this message to inform the VF driver of events that may affect it. - * No direct response is expected from the VF, though it may generate other - * messages in response to this one. - */ -enum i40e_virtchnl_event_codes { - I40E_VIRTCHNL_EVENT_UNKNOWN = 0, - I40E_VIRTCHNL_EVENT_LINK_CHANGE, - I40E_VIRTCHNL_EVENT_RESET_IMPENDING, - I40E_VIRTCHNL_EVENT_PF_DRIVER_CLOSE, -}; -#define I40E_PF_EVENT_SEVERITY_INFO 0 -#define I40E_PF_EVENT_SEVERITY_CERTAIN_DOOM 255 - -struct i40e_virtchnl_pf_event { - enum i40e_virtchnl_event_codes event; - union { - struct { - enum i40e_aq_link_speed link_speed; - bool link_status; - } link_event; - } event_data; - - int severity; -}; - -/* I40E_VIRTCHNL_OP_CONFIG_IWARP_IRQ_MAP - * VF uses this message to request PF to map IWARP vectors to IWARP queues. - * The request for this originates from the VF IWARP driver through - * a client interface between VF LAN and VF IWARP driver. - * A vector could have an AEQ and CEQ attached to it although - * there is a single AEQ per VF IWARP instance in which case - * most vectors will have an INVALID_IDX for aeq and valid idx for ceq. - * There will never be a case where there will be multiple CEQs attached - * to a single vector. - * PF configures interrupt mapping and returns status. - */ - -/* HW does not define a type value for AEQ; only for RX/TX and CEQ. - * In order for us to keep the interface simple, SW will define a - * unique type value for AEQ. - */ -#define I40E_QUEUE_TYPE_PE_AEQ 0x80 -#define I40E_QUEUE_INVALID_IDX 0xFFFF - -struct i40e_virtchnl_iwarp_qv_info { - u32 v_idx; /* msix_vector */ - u16 ceq_idx; - u16 aeq_idx; - u8 itr_idx; -}; - -struct i40e_virtchnl_iwarp_qvlist_info { - u32 num_vectors; - struct i40e_virtchnl_iwarp_qv_info qv_info[1]; -}; - -/* VF reset states - these are written into the RSTAT register: - * I40E_VFGEN_RSTAT1 on the PF - * I40E_VFGEN_RSTAT on the VF - * When the PF initiates a reset, it writes 0 - * When the reset is complete, it writes 1 - * When the PF detects that the VF has recovered, it writes 2 - * VF checks this register periodically to determine if a reset has occurred, - * then polls it to know when the reset is complete. - * If either the PF or VF reads the register while the hardware - * is in a reset state, it will return DEADBEEF, which, when masked - * will result in 3. - */ -enum i40e_vfr_states { - I40E_VFR_INPROGRESS = 0, - I40E_VFR_COMPLETED, - I40E_VFR_VFACTIVE, - I40E_VFR_UNKNOWN, -}; - -#endif /* _I40E_VIRTCHNL_H_ */ |