1 files changed, 223 insertions, 26 deletions

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 72576bb3e94d..b36bf9c3e1e4 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -551,6 +551,47 @@ void i40e_pf_reset_stats(struct i40e_pf *pf)
 }
 
 /**
+ * i40e_compute_pci_to_hw_id - compute index form PCI function.
+ * @vsi: ptr to the VSI to read from.
+ * @hw: ptr to the hardware info.
+ **/
+static u32 i40e_compute_pci_to_hw_id(struct i40e_vsi *vsi, struct i40e_hw *hw)
+{
+	int pf_count = i40e_get_pf_count(hw);
+
+	if (vsi->type == I40E_VSI_SRIOV)
+		return (hw->port * BIT(7)) / pf_count + vsi->vf_id;
+
+	return hw->port + BIT(7);
+}
+
+/**
+ * i40e_stat_update64 - read and update a 64 bit stat from the chip.
+ * @hw: ptr to the hardware info.
+ * @hireg: the high 32 bit reg to read.
+ * @loreg: the low 32 bit reg to read.
+ * @offset_loaded: has the initial offset been loaded yet.
+ * @offset: ptr to current offset value.
+ * @stat: ptr to the stat.
+ *
+ * Since the device stats are not reset at PFReset, they will not
+ * be zeroed when the driver starts.  We'll save the first values read
+ * and use them as offsets to be subtracted from the raw values in order
+ * to report stats that count from zero.
+ **/
+static void i40e_stat_update64(struct i40e_hw *hw, u32 hireg, u32 loreg,
+			       bool offset_loaded, u64 *offset, u64 *stat)
+{
+	u64 new_data;
+
+	new_data = rd64(hw, loreg);
+
+	if (!offset_loaded || new_data < *offset)
+		*offset = new_data;
+	*stat = new_data - *offset;
+}
+
+/**
  * i40e_stat_update48 - read and update a 48 bit stat from the chip
  * @hw: ptr to the hardware info
  * @hireg: the high 32 bit reg to read
@@ -622,6 +663,34 @@ static void i40e_stat_update_and_clear32(struct i40e_hw *hw, u32 reg, u64 *stat)
 }
 
 /**
+ * i40e_stats_update_rx_discards - update rx_discards.
+ * @vsi: ptr to the VSI to be updated.
+ * @hw: ptr to the hardware info.
+ * @stat_idx: VSI's stat_counter_idx.
+ * @offset_loaded: ptr to the VSI's stat_offsets_loaded.
+ * @stat_offset: ptr to stat_offset to store first read of specific register.
+ * @stat: ptr to VSI's stat to be updated.
+ **/
+static void
+i40e_stats_update_rx_discards(struct i40e_vsi *vsi, struct i40e_hw *hw,
+			      int stat_idx, bool offset_loaded,
+			      struct i40e_eth_stats *stat_offset,
+			      struct i40e_eth_stats *stat)
+{
+	u64 rx_rdpc, rx_rxerr;
+
+	i40e_stat_update32(hw, I40E_GLV_RDPC(stat_idx), offset_loaded,
+			   &stat_offset->rx_discards, &rx_rdpc);
+	i40e_stat_update64(hw,
+			   I40E_GL_RXERR1H(i40e_compute_pci_to_hw_id(vsi, hw)),
+			   I40E_GL_RXERR1L(i40e_compute_pci_to_hw_id(vsi, hw)),
+			   offset_loaded, &stat_offset->rx_discards_other,
+			   &rx_rxerr);
+
+	stat->rx_discards = rx_rdpc + rx_rxerr;
+}
+
+/**
  * i40e_update_eth_stats - Update VSI-specific ethernet statistics counters.
  * @vsi: the VSI to be updated
  **/
@@ -680,6 +749,10 @@ void i40e_update_eth_stats(struct i40e_vsi *vsi)
 			   I40E_GLV_BPTCL(stat_idx),
 			   vsi->stat_offsets_loaded,
 			   &oes->tx_broadcast, &es->tx_broadcast);
+
+	i40e_stats_update_rx_discards(vsi, hw, stat_idx,
+				      vsi->stat_offsets_loaded, oes, es);
+
 	vsi->stat_offsets_loaded = true;
 }
 
@@ -1369,6 +1442,114 @@ static int i40e_correct_mac_vlan_filters(struct i40e_vsi *vsi,
 }
 
 /**
+ * i40e_get_vf_new_vlan - Get new vlan id on a vf
+ * @vsi: the vsi to configure
+ * @new_mac: new mac filter to be added
+ * @f: existing mac filter, replaced with new_mac->f if new_mac is not NULL
+ * @vlan_filters: the number of active VLAN filters
+ * @trusted: flag if the VF is trusted
+ *
+ * Get new VLAN id based on current VLAN filters, trust, PVID
+ * and vf-vlan-prune-disable flag.
+ *
+ * Returns the value of the new vlan filter or
+ * the old value if no new filter is needed.
+ */
+static s16 i40e_get_vf_new_vlan(struct i40e_vsi *vsi,
+				struct i40e_new_mac_filter *new_mac,
+				struct i40e_mac_filter *f,
+				int vlan_filters,
+				bool trusted)
+{
+	s16 pvid = le16_to_cpu(vsi->info.pvid);
+	struct i40e_pf *pf = vsi->back;
+	bool is_any;
+
+	if (new_mac)
+		f = new_mac->f;
+
+	if (pvid && f->vlan != pvid)
+		return pvid;
+
+	is_any = (trusted ||
+		  !(pf->flags & I40E_FLAG_VF_VLAN_PRUNING));
+
+	if ((vlan_filters && f->vlan == I40E_VLAN_ANY) ||
+	    (!is_any && !vlan_filters && f->vlan == I40E_VLAN_ANY) ||
+	    (is_any && !vlan_filters && f->vlan == 0)) {
+		if (is_any)
+			return I40E_VLAN_ANY;
+		else
+			return 0;
+	}
+
+	return f->vlan;
+}
+
+/**
+ * i40e_correct_vf_mac_vlan_filters - Correct non-VLAN VF filters if necessary
+ * @vsi: the vsi to configure
+ * @tmp_add_list: list of filters ready to be added
+ * @tmp_del_list: list of filters ready to be deleted
+ * @vlan_filters: the number of active VLAN filters
+ * @trusted: flag if the VF is trusted
+ *
+ * Correct VF VLAN filters based on current VLAN filters, trust, PVID
+ * and vf-vlan-prune-disable flag.
+ *
+ * In case of memory allocation failure return -ENOMEM. Otherwise, return 0.
+ *
+ * This function is only expected to be called from within
+ * i40e_sync_vsi_filters.
+ *
+ * NOTE: This function expects to be called while under the
+ * mac_filter_hash_lock
+ */
+static int i40e_correct_vf_mac_vlan_filters(struct i40e_vsi *vsi,
+					    struct hlist_head *tmp_add_list,
+					    struct hlist_head *tmp_del_list,
+					    int vlan_filters,
+					    bool trusted)
+{
+	struct i40e_mac_filter *f, *add_head;
+	struct i40e_new_mac_filter *new_mac;
+	struct hlist_node *h;
+	int bkt, new_vlan;
+
+	hlist_for_each_entry(new_mac, tmp_add_list, hlist) {
+		new_mac->f->vlan = i40e_get_vf_new_vlan(vsi, new_mac, NULL,
+							vlan_filters, trusted);
+	}
+
+	hash_for_each_safe(vsi->mac_filter_hash, bkt, h, f, hlist) {
+		new_vlan = i40e_get_vf_new_vlan(vsi, NULL, f, vlan_filters,
+						trusted);
+		if (new_vlan != f->vlan) {
+			add_head = i40e_add_filter(vsi, f->macaddr, new_vlan);
+			if (!add_head)
+				return -ENOMEM;
+			/* Create a temporary i40e_new_mac_filter */
+			new_mac = kzalloc(sizeof(*new_mac), GFP_ATOMIC);
+			if (!new_mac)
+				return -ENOMEM;
+			new_mac->f = add_head;
+			new_mac->state = add_head->state;
+
+			/* Add the new filter to the tmp list */
+			hlist_add_head(&new_mac->hlist, tmp_add_list);
+
+			/* Put the original filter into the delete list */
+			f->state = I40E_FILTER_REMOVE;
+			hash_del(&f->hlist);
+			hlist_add_head(&f->hlist, tmp_del_list);
+		}
+	}
+
+	vsi->has_vlan_filter = !!vlan_filters;
+	return 0;
+}
+
+/**
  * i40e_rm_default_mac_filter - Remove the default MAC filter set by NVM
  * @vsi: the PF Main VSI - inappropriate for any other VSI
  * @macaddr: the MAC address
@@ -1852,11 +2033,15 @@ static void i40e_vsi_setup_queue_map(struct i40e_vsi *vsi,
 		 * non-zero req_queue_pairs says that user requested a new
 		 * queue count via ethtool's set_channels, so use this
 		 * value for queues distribution across traffic classes
+		 * We need at least one queue pair for the interface
+		 * to be usable as we see in else statement.
 		 */
 		if (vsi->req_queue_pairs > 0)
 			vsi->num_queue_pairs = vsi->req_queue_pairs;
 		else if (pf->flags & I40E_FLAG_MSIX_ENABLED)
 			vsi->num_queue_pairs = pf->num_lan_msix;
+		else
+			vsi->num_queue_pairs = 1;
 	}
 
 	/* Number of queues per enabled TC */
@@ -2423,10 +2608,14 @@ int i40e_sync_vsi_filters(struct i40e_vsi *vsi)
 				vlan_filters++;
 		}
 
-		retval = i40e_correct_mac_vlan_filters(vsi,
-						       &tmp_add_list,
-						       &tmp_del_list,
-						       vlan_filters);
+		if (vsi->type != I40E_VSI_SRIOV)
+			retval = i40e_correct_mac_vlan_filters
+				(vsi, &tmp_add_list, &tmp_del_list,
+				 vlan_filters);
+		else
+			retval = i40e_correct_vf_mac_vlan_filters
+				(vsi, &tmp_add_list, &tmp_del_list,
+				 vlan_filters, pf->vf[vsi->vf_id].trusted);
 
 		hlist_for_each_entry(new, &tmp_add_list, hlist)
 			netdev_hw_addr_refcnt(new->f, vsi->netdev, 1);
@@ -2855,8 +3044,21 @@ int i40e_add_vlan_all_mac(struct i40e_vsi *vsi, s16 vid)
 	int bkt;
 
 	hash_for_each_safe(vsi->mac_filter_hash, bkt, h, f, hlist) {
-		if (f->state == I40E_FILTER_REMOVE)
+		/* If we're asked to add a filter that has been marked for
+		 * removal, it is safe to simply restore it to active state.
+		 * __i40e_del_filter will have simply deleted any filters which
+		 * were previously marked NEW or FAILED, so if it is currently
+		 * marked REMOVE it must have previously been ACTIVE. Since we
+		 * haven't yet run the sync filters task, just restore this
+		 * filter to the ACTIVE state so that the sync task leaves it
+		 * in place.
+		 */
+		if (f->state == I40E_FILTER_REMOVE && f->vlan == vid) {
+			f->state = I40E_FILTER_ACTIVE;
+			continue;
+		} else if (f->state == I40E_FILTER_REMOVE) {
 			continue;
+		}
 		add_f = i40e_add_filter(vsi, f->macaddr, vid);
 		if (!add_f) {
 			dev_info(&vsi->back->pdev->dev,
@@ -4037,7 +4239,6 @@ static void i40e_free_misc_vector(struct i40e_pf *pf)
 	i40e_flush(&pf->hw);
 
 	if (pf->flags & I40E_FLAG_MSIX_ENABLED && pf->msix_entries) {
-		synchronize_irq(pf->msix_entries[0].vector);
 		free_irq(pf->msix_entries[0].vector, pf);
 		clear_bit(__I40E_MISC_IRQ_REQUESTED, pf->state);
 	}
@@ -4776,7 +4977,6 @@ static void i40e_vsi_free_irq(struct i40e_vsi *vsi)
 			irq_set_affinity_notifier(irq_num, NULL);
 			/* remove our suggested affinity mask for this IRQ */
 			irq_update_affinity_hint(irq_num, NULL);
-			synchronize_irq(irq_num);
 			free_irq(irq_num, vsi->q_vectors[i]);
 
 			/* Tear down the interrupt queue link list
@@ -5260,7 +5460,7 @@ static u8 i40e_pf_get_num_tc(struct i40e_pf *pf)
 	u8 num_tc = 0;
 	struct i40e_dcbx_config *dcbcfg = &hw->local_dcbx_config;
 
-	if (pf->flags & I40E_FLAG_TC_MQPRIO)
+	if (i40e_is_tc_mqprio_enabled(pf))
 		return pf->vsi[pf->lan_vsi]->mqprio_qopt.qopt.num_tc;
 
 	/* If neither MQPRIO nor DCB is enabled, then always use single TC */
@@ -5292,7 +5492,7 @@ static u8 i40e_pf_get_num_tc(struct i40e_pf *pf)
  **/
 static u8 i40e_pf_get_tc_map(struct i40e_pf *pf)
 {
-	if (pf->flags & I40E_FLAG_TC_MQPRIO)
+	if (i40e_is_tc_mqprio_enabled(pf))
 		return i40e_mqprio_get_enabled_tc(pf);
 
 	/* If neither MQPRIO nor DCB is enabled for this PF then just return
@@ -5389,7 +5589,7 @@ static int i40e_vsi_configure_bw_alloc(struct i40e_vsi *vsi, u8 enabled_tc,
 	int i;
 
 	/* There is no need to reset BW when mqprio mode is on.  */
-	if (pf->flags & I40E_FLAG_TC_MQPRIO)
+	if (i40e_is_tc_mqprio_enabled(pf))
 		return 0;
 	if (!vsi->mqprio_qopt.qopt.hw && !(pf->flags & I40E_FLAG_DCB_ENABLED)) {
 		ret = i40e_set_bw_limit(vsi, vsi->seid, 0);
@@ -5461,7 +5661,7 @@ static void i40e_vsi_config_netdev_tc(struct i40e_vsi *vsi, u8 enabled_tc)
 					vsi->tc_config.tc_info[i].qoffset);
 	}
 
-	if (pf->flags & I40E_FLAG_TC_MQPRIO)
+	if (i40e_is_tc_mqprio_enabled(pf))
 		return;
 
 	/* Assign UP2TC map for the VSI */
@@ -5622,7 +5822,7 @@ static int i40e_vsi_config_tc(struct i40e_vsi *vsi, u8 enabled_tc)
 	ctxt.vf_num = 0;
 	ctxt.uplink_seid = vsi->uplink_seid;
 	ctxt.info = vsi->info;
-	if (vsi->back->flags & I40E_FLAG_TC_MQPRIO) {
+	if (i40e_is_tc_mqprio_enabled(pf)) {
 		ret = i40e_vsi_setup_queue_map_mqprio(vsi, &ctxt, enabled_tc);
 		if (ret)
 			goto out;
@@ -6346,7 +6546,7 @@ int i40e_create_queue_channel(struct i40e_vsi *vsi,
 		pf->flags |= I40E_FLAG_VEB_MODE_ENABLED;
 
 		if (vsi->type == I40E_VSI_MAIN) {
-			if (pf->flags & I40E_FLAG_TC_MQPRIO)
+			if (i40e_is_tc_mqprio_enabled(pf))
 				i40e_do_reset(pf, I40E_PF_RESET_FLAG, true);
 			else
 				i40e_do_reset_safe(pf, I40E_PF_RESET_FLAG);
@@ -7740,7 +7940,7 @@ static void *i40e_fwd_add(struct net_device *netdev, struct net_device *vdev)
 		netdev_info(netdev, "Macvlans are not supported when DCB is enabled\n");
 		return ERR_PTR(-EINVAL);
 	}
-	if ((pf->flags & I40E_FLAG_TC_MQPRIO)) {
+	if (i40e_is_tc_mqprio_enabled(pf)) {
 		netdev_info(netdev, "Macvlans are not supported when HW TC offload is on\n");
 		return ERR_PTR(-EINVAL);
 	}
@@ -7993,7 +8193,7 @@ config_tc:
 	/* Quiesce VSI queues */
 	i40e_quiesce_vsi(vsi);
 
-	if (!hw && !(pf->flags & I40E_FLAG_TC_MQPRIO))
+	if (!hw && !i40e_is_tc_mqprio_enabled(pf))
 		i40e_remove_queue_channels(vsi);
 
 	/* Configure VSI for enabled TCs */
@@ -8017,7 +8217,7 @@ config_tc:
 		 "Setup channel (id:%u) utilizing num_queues %d\n",
 		 vsi->seid, vsi->tc_config.tc_info[0].qcount);
 
-	if (pf->flags & I40E_FLAG_TC_MQPRIO) {
+	if (i40e_is_tc_mqprio_enabled(pf)) {
 		if (vsi->mqprio_qopt.max_rate[0]) {
 			u64 max_tx_rate = vsi->mqprio_qopt.max_rate[0];
 
@@ -10577,7 +10777,7 @@ static int i40e_reset(struct i40e_pf *pf)
  **/
 static void i40e_rebuild(struct i40e_pf *pf, bool reinit, bool lock_acquired)
 {
-	int old_recovery_mode_bit = test_bit(__I40E_RECOVERY_MODE, pf->state);
+	const bool is_recovery_mode_reported = i40e_check_recovery_mode(pf);
 	struct i40e_vsi *vsi = pf->vsi[pf->lan_vsi];
 	struct i40e_hw *hw = &pf->hw;
 	i40e_status ret;
@@ -10585,13 +10785,11 @@ static void i40e_rebuild(struct i40e_pf *pf, bool reinit, bool lock_acquired)
 	int v;
 
 	if (test_bit(__I40E_EMP_RESET_INTR_RECEIVED, pf->state) &&
-	    i40e_check_recovery_mode(pf)) {
+	    is_recovery_mode_reported)
 		i40e_set_ethtool_ops(pf->vsi[pf->lan_vsi]->netdev);
-	}
 
 	if (test_bit(__I40E_DOWN, pf->state) &&
-	    !test_bit(__I40E_RECOVERY_MODE, pf->state) &&
-	    !old_recovery_mode_bit)
+	    !test_bit(__I40E_RECOVERY_MODE, pf->state))
 		goto clear_recovery;
 	dev_dbg(&pf->pdev->dev, "Rebuilding internal switch\n");
 
@@ -10618,13 +10816,12 @@ static void i40e_rebuild(struct i40e_pf *pf, bool reinit, bool lock_acquired)
 	 * accordingly with regard to resources initialization
 	 * and deinitialization
 	 */
-	if (test_bit(__I40E_RECOVERY_MODE, pf->state) ||
-	    old_recovery_mode_bit) {
+	if (test_bit(__I40E_RECOVERY_MODE, pf->state)) {
 		if (i40e_get_capabilities(pf,
 					  i40e_aqc_opc_list_func_capabilities))
 			goto end_unlock;
 
-		if (test_bit(__I40E_RECOVERY_MODE, pf->state)) {
+		if (is_recovery_mode_reported) {
 			/* we're staying in recovery mode so we'll reinitialize
 			 * misc vector here
 			 */
@@ -10674,7 +10871,7 @@ static void i40e_rebuild(struct i40e_pf *pf, bool reinit, bool lock_acquired)
 	 * unless I40E_FLAG_TC_MQPRIO was enabled or DCB
 	 * is not supported with new link speed
 	 */
-	if (pf->flags & I40E_FLAG_TC_MQPRIO) {
+	if (i40e_is_tc_mqprio_enabled(pf)) {
 		i40e_aq_set_dcb_parameters(hw, false, NULL);
 	} else {
 		if (I40E_IS_X710TL_DEVICE(hw->device_id) &&
@@ -13033,7 +13230,7 @@ static netdev_features_t i40e_features_check(struct sk_buff *skb,
 	}
 
 	/* No need to validate L4LEN as TCP is the only protocol with a
-	 * a flexible value and we support all possible values supported
+	 * flexible value and we support all possible values supported
 	 * by TCP, which is at most 15 dwords
 	 */