diff options
Diffstat (limited to 'drivers/net/ethernet/intel/e1000e/netdev.c')
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/netdev.c | 32 |
1 files changed, 22 insertions, 10 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index c509a5c900f5..7dd2c11c3f61 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -3807,7 +3807,7 @@ void e1000e_reset(struct e1000_adapter *adapter) /* reset Packet Buffer Allocation to default */ ew32(PBA, pba); - if (adapter->max_frame_size > ETH_FRAME_LEN + ETH_FCS_LEN) { + if (adapter->max_frame_size > (VLAN_ETH_FRAME_LEN + ETH_FCS_LEN)) { /* To maintain wire speed transmits, the Tx FIFO should be * large enough to accommodate two full transmit packets, * rounded up to the next 1KB and expressed in KB. Likewise, @@ -4196,9 +4196,9 @@ static int e1000_sw_init(struct e1000_adapter *adapter) { struct net_device *netdev = adapter->netdev; - adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN; + adapter->rx_buffer_len = VLAN_ETH_FRAME_LEN + ETH_FCS_LEN; adapter->rx_ps_bsize0 = 128; - adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN; + adapter->max_frame_size = netdev->mtu + VLAN_ETH_HLEN + ETH_FCS_LEN; adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN; adapter->tx_ring_count = E1000_DEFAULT_TXD; adapter->rx_ring_count = E1000_DEFAULT_RXD; @@ -5781,17 +5781,17 @@ struct rtnl_link_stats64 *e1000e_get_stats64(struct net_device *netdev, static int e1000_change_mtu(struct net_device *netdev, int new_mtu) { struct e1000_adapter *adapter = netdev_priv(netdev); - int max_frame = new_mtu + VLAN_HLEN + ETH_HLEN + ETH_FCS_LEN; + int max_frame = new_mtu + VLAN_ETH_HLEN + ETH_FCS_LEN; /* Jumbo frame support */ - if ((max_frame > ETH_FRAME_LEN + ETH_FCS_LEN) && + if ((max_frame > (VLAN_ETH_FRAME_LEN + ETH_FCS_LEN)) && !(adapter->flags & FLAG_HAS_JUMBO_FRAMES)) { e_err("Jumbo Frames not supported.\n"); return -EINVAL; } /* Supported frame sizes */ - if ((new_mtu < ETH_ZLEN + ETH_FCS_LEN + VLAN_HLEN) || + if ((new_mtu < (VLAN_ETH_ZLEN + ETH_FCS_LEN)) || (max_frame > adapter->max_hw_frame_size)) { e_err("Unsupported MTU setting\n"); return -EINVAL; @@ -5831,10 +5831,8 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu) adapter->rx_buffer_len = 4096; /* adjust allocation if LPE protects us, and we aren't using SBP */ - if ((max_frame == ETH_FRAME_LEN + ETH_FCS_LEN) || - (max_frame == ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN)) - adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN - + ETH_FCS_LEN; + if (max_frame <= (VLAN_ETH_FRAME_LEN + ETH_FCS_LEN)) + adapter->rx_buffer_len = VLAN_ETH_FRAME_LEN + ETH_FCS_LEN; if (netif_running(netdev)) e1000e_up(adapter); @@ -6678,6 +6676,19 @@ static void e1000_eeprom_checks(struct e1000_adapter *adapter) } } +static netdev_features_t e1000_fix_features(struct net_device *netdev, + netdev_features_t features) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + + /* Jumbo frame workaround on 82579 and newer requires CRC be stripped */ + if ((hw->mac.type >= e1000_pch2lan) && (netdev->mtu > ETH_DATA_LEN)) + features &= ~NETIF_F_RXFCS; + + return features; +} + static int e1000_set_features(struct net_device *netdev, netdev_features_t features) { @@ -6734,6 +6745,7 @@ static const struct net_device_ops e1000e_netdev_ops = { .ndo_poll_controller = e1000_netpoll, #endif .ndo_set_features = e1000_set_features, + .ndo_fix_features = e1000_fix_features, }; /** |