diff options
Diffstat (limited to 'drivers/net/dsa')
| -rw-r--r-- | drivers/net/dsa/lantiq_gswip.c | 2 | ||||
| -rw-r--r-- | drivers/net/dsa/mt7530.c | 8 |
2 files changed, 2 insertions, 8 deletions
diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c index 3ff4b7e177f3..dbd4486a173f 100644 --- a/drivers/net/dsa/lantiq_gswip.c +++ b/drivers/net/dsa/lantiq_gswip.c @@ -230,7 +230,7 @@ #define GSWIP_SDMA_PCTRLp(p) (0xBC0 + ((p) * 0x6)) #define GSWIP_SDMA_PCTRL_EN BIT(0) /* SDMA Port Enable */ #define GSWIP_SDMA_PCTRL_FCEN BIT(1) /* Flow Control Enable */ -#define GSWIP_SDMA_PCTRL_PAUFWD BIT(1) /* Pause Frame Forwarding */ +#define GSWIP_SDMA_PCTRL_PAUFWD BIT(3) /* Pause Frame Forwarding */ #define GSWIP_TABLE_ACTIVE_VLAN 0x01 #define GSWIP_TABLE_VLAN_MAPPING 0x02 diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index 094737e5084a..9890672a206d 100644 --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -1035,9 +1035,6 @@ mt7530_port_enable(struct dsa_switch *ds, int port, { struct mt7530_priv *priv = ds->priv; - if (!dsa_is_user_port(ds, port)) - return 0; - mutex_lock(&priv->reg_mutex); /* Allow the user port gets connected to the cpu port and also @@ -1060,9 +1057,6 @@ mt7530_port_disable(struct dsa_switch *ds, int port) { struct mt7530_priv *priv = ds->priv; - if (!dsa_is_user_port(ds, port)) - return; - mutex_lock(&priv->reg_mutex); /* Clear up all port matrix which could be restored in the next @@ -3211,7 +3205,7 @@ mt7530_probe(struct mdio_device *mdiodev) return -ENOMEM; priv->ds->dev = &mdiodev->dev; - priv->ds->num_ports = DSA_MAX_PORTS; + priv->ds->num_ports = MT7530_NUM_PORTS; /* Use medatek,mcm property to distinguish hardware type that would * casues a little bit differences on power-on sequence. |