diff options
Diffstat (limited to 'drivers/net/dsa')
| -rw-r--r-- | drivers/net/dsa/lan9303-core.c | 4 | ||||
| -rw-r--r-- | drivers/net/dsa/mt7530.c | 48 | ||||
| -rw-r--r-- | drivers/net/dsa/mt7530.h | 6 | ||||
| -rw-r--r-- | drivers/net/dsa/mv88e6xxx/chip.c | 2 | ||||
| -rw-r--r-- | drivers/net/dsa/mv88e6xxx/port.h | 2 | ||||
| -rw-r--r-- | drivers/net/dsa/ocelot/felix_vsc9959.c | 2 | ||||
| -rw-r--r-- | drivers/net/dsa/qca/Kconfig | 1 | ||||
| -rw-r--r-- | drivers/net/dsa/rzn1_a5psw.c | 83 | ||||
| -rw-r--r-- | drivers/net/dsa/rzn1_a5psw.h | 3 |
9 files changed, 115 insertions, 36 deletions
diff --git a/drivers/net/dsa/lan9303-core.c b/drivers/net/dsa/lan9303-core.c index cbe831875347..c0215a8770f4 100644 --- a/drivers/net/dsa/lan9303-core.c +++ b/drivers/net/dsa/lan9303-core.c @@ -1188,8 +1188,6 @@ static int lan9303_port_fdb_add(struct dsa_switch *ds, int port, struct lan9303 *chip = ds->priv; dev_dbg(chip->dev, "%s(%d, %pM, %d)\n", __func__, port, addr, vid); - if (vid) - return -EOPNOTSUPP; return lan9303_alr_add_port(chip, addr, port, false); } @@ -1201,8 +1199,6 @@ static int lan9303_port_fdb_del(struct dsa_switch *ds, int port, struct lan9303 *chip = ds->priv; dev_dbg(chip->dev, "%s(%d, %pM, %d)\n", __func__, port, addr, vid); - if (vid) - return -EOPNOTSUPP; lan9303_alr_del_port(chip, addr, port); return 0; diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index 9bc54e1348cb..7e773c4ba046 100644 --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -399,6 +399,20 @@ static void mt7530_pll_setup(struct mt7530_priv *priv) core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN); } +/* If port 6 is available as a CPU port, always prefer that as the default, + * otherwise don't care. + */ +static struct dsa_port * +mt753x_preferred_default_local_cpu_port(struct dsa_switch *ds) +{ + struct dsa_port *cpu_dp = dsa_to_port(ds, 6); + + if (dsa_port_is_cpu(cpu_dp)) + return cpu_dp; + + return NULL; +} + /* Setup port 6 interface mode and TRGMII TX circuit */ static int mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface) @@ -985,6 +999,18 @@ unlock_exit: mutex_unlock(&priv->reg_mutex); } +static void +mt753x_trap_frames(struct mt7530_priv *priv) +{ + /* Trap BPDUs to the CPU port(s) */ + mt7530_rmw(priv, MT753X_BPC, MT753X_BPDU_PORT_FW_MASK, + MT753X_BPDU_CPU_ONLY); + + /* Trap LLDP frames with :0E MAC DA to the CPU port(s) */ + mt7530_rmw(priv, MT753X_RGAC2, MT753X_R0E_PORT_FW_MASK, + MT753X_R0E_PORT_FW(MT753X_BPDU_CPU_ONLY)); +} + static int mt753x_cpu_port_enable(struct dsa_switch *ds, int port) { @@ -1007,9 +1033,16 @@ mt753x_cpu_port_enable(struct dsa_switch *ds, int port) UNU_FFP(BIT(port))); /* Set CPU port number */ - if (priv->id == ID_MT7621) + if (priv->id == ID_MT7530 || priv->id == ID_MT7621) mt7530_rmw(priv, MT7530_MFC, CPU_MASK, CPU_EN | CPU_PORT(port)); + /* Add the CPU port to the CPU port bitmap for MT7531 and the switch on + * the MT7988 SoC. Trapped frames will be forwarded to the CPU port that + * is affine to the inbound user port. + */ + if (priv->id == ID_MT7531 || priv->id == ID_MT7988) + mt7530_set(priv, MT7531_CFC, MT7531_CPU_PMAP(BIT(port))); + /* CPU port gets connected to all user ports of * the switch. */ @@ -2255,6 +2288,8 @@ mt7530_setup(struct dsa_switch *ds) priv->p6_interface = PHY_INTERFACE_MODE_NA; + mt753x_trap_frames(priv); + /* Enable and reset MIB counters */ mt7530_mib_reset(ds); @@ -2352,17 +2387,9 @@ static int mt7531_setup_common(struct dsa_switch *ds) { struct mt7530_priv *priv = ds->priv; - struct dsa_port *cpu_dp; int ret, i; - /* BPDU to CPU port */ - dsa_switch_for_each_cpu_port(cpu_dp, ds) { - mt7530_rmw(priv, MT7531_CFC, MT7531_CPU_PMAP_MASK, - BIT(cpu_dp->index)); - break; - } - mt7530_rmw(priv, MT753X_BPC, MT753X_BPDU_PORT_FW_MASK, - MT753X_BPDU_CPU_ONLY); + mt753x_trap_frames(priv); /* Enable and reset MIB counters */ mt7530_mib_reset(ds); @@ -3085,6 +3112,7 @@ static int mt7988_setup(struct dsa_switch *ds) const struct dsa_switch_ops mt7530_switch_ops = { .get_tag_protocol = mtk_get_tag_protocol, .setup = mt753x_setup, + .preferred_default_local_cpu_port = mt753x_preferred_default_local_cpu_port, .get_strings = mt7530_get_strings, .get_ethtool_stats = mt7530_get_ethtool_stats, .get_sset_count = mt7530_get_sset_count, diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h index 5084f48a8869..08045b035e6a 100644 --- a/drivers/net/dsa/mt7530.h +++ b/drivers/net/dsa/mt7530.h @@ -54,6 +54,7 @@ enum mt753x_id { #define MT7531_MIRROR_PORT_GET(x) (((x) >> 16) & MIRROR_MASK) #define MT7531_MIRROR_PORT_SET(x) (((x) & MIRROR_MASK) << 16) #define MT7531_CPU_PMAP_MASK GENMASK(7, 0) +#define MT7531_CPU_PMAP(x) FIELD_PREP(MT7531_CPU_PMAP_MASK, x) #define MT753X_MIRROR_REG(id) ((((id) == ID_MT7531) || ((id) == ID_MT7988)) ? \ MT7531_CFC : MT7530_MFC) @@ -66,6 +67,11 @@ enum mt753x_id { #define MT753X_BPC 0x24 #define MT753X_BPDU_PORT_FW_MASK GENMASK(2, 0) +/* Register for :03 and :0E MAC DA frame control */ +#define MT753X_RGAC2 0x2c +#define MT753X_R0E_PORT_FW_MASK GENMASK(18, 16) +#define MT753X_R0E_PORT_FW(x) FIELD_PREP(MT753X_R0E_PORT_FW_MASK, x) + enum mt753x_bpdu_port_fw { MT753X_BPDU_FOLLOW_MFC, MT753X_BPDU_CPU_EXCLUDE = 4, diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c index 64a2f2f83735..08a46ffd53af 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.c +++ b/drivers/net/dsa/mv88e6xxx/chip.c @@ -7170,7 +7170,7 @@ static int mv88e6xxx_probe(struct mdio_device *mdiodev) goto out; } if (chip->reset) - usleep_range(1000, 2000); + usleep_range(10000, 20000); /* Detect if the device is configured in single chip addressing mode, * otherwise continue with address specific smi init/detection. diff --git a/drivers/net/dsa/mv88e6xxx/port.h b/drivers/net/dsa/mv88e6xxx/port.h index aec9d4fd20e3..d19b6303b91f 100644 --- a/drivers/net/dsa/mv88e6xxx/port.h +++ b/drivers/net/dsa/mv88e6xxx/port.h @@ -276,7 +276,7 @@ /* Offset 0x10: Extended Port Control Command */ #define MV88E6393X_PORT_EPC_CMD 0x10 #define MV88E6393X_PORT_EPC_CMD_BUSY 0x8000 -#define MV88E6393X_PORT_EPC_CMD_WRITE 0x0300 +#define MV88E6393X_PORT_EPC_CMD_WRITE 0x3000 #define MV88E6393X_PORT_EPC_INDEX_PORT_ETYPE 0x02 /* Offset 0x11: Extended Port Control Data */ diff --git a/drivers/net/dsa/ocelot/felix_vsc9959.c b/drivers/net/dsa/ocelot/felix_vsc9959.c index cfb3faeaa5bf..d172a3e9736c 100644 --- a/drivers/net/dsa/ocelot/felix_vsc9959.c +++ b/drivers/net/dsa/ocelot/felix_vsc9959.c @@ -1263,7 +1263,7 @@ static void vsc9959_tas_guard_bands_update(struct ocelot *ocelot, int port) /* Consider the standard Ethernet overhead of 8 octets preamble+SFD, * 4 octets FCS, 12 octets IFG. */ - needed_bit_time_ps = (maxlen + 24) * picos_per_byte; + needed_bit_time_ps = (u64)(maxlen + 24) * picos_per_byte; dev_dbg(ocelot->dev, "port %d: max frame size %d needs %llu ps at speed %d\n", diff --git a/drivers/net/dsa/qca/Kconfig b/drivers/net/dsa/qca/Kconfig index 4347b42c50fd..de9da469908b 100644 --- a/drivers/net/dsa/qca/Kconfig +++ b/drivers/net/dsa/qca/Kconfig @@ -20,6 +20,7 @@ config NET_DSA_QCA8K_LEDS_SUPPORT bool "Qualcomm Atheros QCA8K Ethernet switch family LEDs support" depends on NET_DSA_QCA8K depends on LEDS_CLASS=y || LEDS_CLASS=NET_DSA_QCA8K + depends on LEDS_TRIGGERS help This enabled support for LEDs present on the Qualcomm Atheros QCA8K Ethernet switch chips. diff --git a/drivers/net/dsa/rzn1_a5psw.c b/drivers/net/dsa/rzn1_a5psw.c index 919027cf2012..c37d2e537230 100644 --- a/drivers/net/dsa/rzn1_a5psw.c +++ b/drivers/net/dsa/rzn1_a5psw.c @@ -120,6 +120,22 @@ static void a5psw_port_mgmtfwd_set(struct a5psw *a5psw, int port, bool enable) a5psw_port_pattern_set(a5psw, port, A5PSW_PATTERN_MGMTFWD, enable); } +static void a5psw_port_tx_enable(struct a5psw *a5psw, int port, bool enable) +{ + u32 mask = A5PSW_PORT_ENA_TX(port); + u32 reg = enable ? mask : 0; + + /* Even though the port TX is disabled through TXENA bit in the + * PORT_ENA register, it can still send BPDUs. This depends on the tag + * configuration added when sending packets from the CPU port to the + * switch port. Indeed, when using forced forwarding without filtering, + * even disabled ports will be able to send packets that are tagged. + * This allows to implement STP support when ports are in a state where + * forwarding traffic should be stopped but BPDUs should still be sent. + */ + a5psw_reg_rmw(a5psw, A5PSW_PORT_ENA, mask, reg); +} + static void a5psw_port_enable_set(struct a5psw *a5psw, int port, bool enable) { u32 port_ena = 0; @@ -292,6 +308,22 @@ static int a5psw_set_ageing_time(struct dsa_switch *ds, unsigned int msecs) return 0; } +static void a5psw_port_learning_set(struct a5psw *a5psw, int port, bool learn) +{ + u32 mask = A5PSW_INPUT_LEARN_DIS(port); + u32 reg = !learn ? mask : 0; + + a5psw_reg_rmw(a5psw, A5PSW_INPUT_LEARN, mask, reg); +} + +static void a5psw_port_rx_block_set(struct a5psw *a5psw, int port, bool block) +{ + u32 mask = A5PSW_INPUT_LEARN_BLOCK(port); + u32 reg = block ? mask : 0; + + a5psw_reg_rmw(a5psw, A5PSW_INPUT_LEARN, mask, reg); +} + static void a5psw_flooding_set_resolution(struct a5psw *a5psw, int port, bool set) { @@ -308,6 +340,14 @@ static void a5psw_flooding_set_resolution(struct a5psw *a5psw, int port, a5psw_reg_writel(a5psw, offsets[i], a5psw->bridged_ports); } +static void a5psw_port_set_standalone(struct a5psw *a5psw, int port, + bool standalone) +{ + a5psw_port_learning_set(a5psw, port, !standalone); + a5psw_flooding_set_resolution(a5psw, port, !standalone); + a5psw_port_mgmtfwd_set(a5psw, port, standalone); +} + static int a5psw_port_bridge_join(struct dsa_switch *ds, int port, struct dsa_bridge bridge, bool *tx_fwd_offload, @@ -323,8 +363,7 @@ static int a5psw_port_bridge_join(struct dsa_switch *ds, int port, } a5psw->br_dev = bridge.dev; - a5psw_flooding_set_resolution(a5psw, port, true); - a5psw_port_mgmtfwd_set(a5psw, port, false); + a5psw_port_set_standalone(a5psw, port, false); return 0; } @@ -334,8 +373,7 @@ static void a5psw_port_bridge_leave(struct dsa_switch *ds, int port, { struct a5psw *a5psw = ds->priv; - a5psw_flooding_set_resolution(a5psw, port, false); - a5psw_port_mgmtfwd_set(a5psw, port, true); + a5psw_port_set_standalone(a5psw, port, true); /* No more ports bridged */ if (a5psw->bridged_ports == BIT(A5PSW_CPU_PORT)) @@ -344,28 +382,35 @@ static void a5psw_port_bridge_leave(struct dsa_switch *ds, int port, static void a5psw_port_stp_state_set(struct dsa_switch *ds, int port, u8 state) { - u32 mask = A5PSW_INPUT_LEARN_DIS(port) | A5PSW_INPUT_LEARN_BLOCK(port); + bool learning_enabled, rx_enabled, tx_enabled; struct a5psw *a5psw = ds->priv; - u32 reg = 0; switch (state) { case BR_STATE_DISABLED: case BR_STATE_BLOCKING: - reg |= A5PSW_INPUT_LEARN_DIS(port); - reg |= A5PSW_INPUT_LEARN_BLOCK(port); - break; case BR_STATE_LISTENING: - reg |= A5PSW_INPUT_LEARN_DIS(port); + rx_enabled = false; + tx_enabled = false; + learning_enabled = false; break; case BR_STATE_LEARNING: - reg |= A5PSW_INPUT_LEARN_BLOCK(port); + rx_enabled = false; + tx_enabled = false; + learning_enabled = true; break; case BR_STATE_FORWARDING: - default: + rx_enabled = true; + tx_enabled = true; + learning_enabled = true; break; + default: + dev_err(ds->dev, "invalid STP state: %d\n", state); + return; } - a5psw_reg_rmw(a5psw, A5PSW_INPUT_LEARN, mask, reg); + a5psw_port_learning_set(a5psw, port, learning_enabled); + a5psw_port_rx_block_set(a5psw, port, !rx_enabled); + a5psw_port_tx_enable(a5psw, port, tx_enabled); } static void a5psw_port_fast_age(struct dsa_switch *ds, int port) @@ -673,7 +718,7 @@ static int a5psw_setup(struct dsa_switch *ds) } /* Configure management port */ - reg = A5PSW_CPU_PORT | A5PSW_MGMT_CFG_DISCARD; + reg = A5PSW_CPU_PORT | A5PSW_MGMT_CFG_ENABLE; a5psw_reg_writel(a5psw, A5PSW_MGMT_CFG, reg); /* Set pattern 0 to forward all frame to mgmt port */ @@ -722,13 +767,15 @@ static int a5psw_setup(struct dsa_switch *ds) if (dsa_port_is_unused(dp)) continue; - /* Enable egress flooding for CPU port */ - if (dsa_port_is_cpu(dp)) + /* Enable egress flooding and learning for CPU port */ + if (dsa_port_is_cpu(dp)) { a5psw_flooding_set_resolution(a5psw, port, true); + a5psw_port_learning_set(a5psw, port, true); + } - /* Enable management forward only for user ports */ + /* Enable standalone mode for user ports */ if (dsa_port_is_user(dp)) - a5psw_port_mgmtfwd_set(a5psw, port, true); + a5psw_port_set_standalone(a5psw, port, true); } return 0; diff --git a/drivers/net/dsa/rzn1_a5psw.h b/drivers/net/dsa/rzn1_a5psw.h index c67abd49c013..b869192eef3f 100644 --- a/drivers/net/dsa/rzn1_a5psw.h +++ b/drivers/net/dsa/rzn1_a5psw.h @@ -19,6 +19,7 @@ #define A5PSW_PORT_OFFSET(port) (0x400 * (port)) #define A5PSW_PORT_ENA 0x8 +#define A5PSW_PORT_ENA_TX(port) BIT(port) #define A5PSW_PORT_ENA_RX_SHIFT 16 #define A5PSW_PORT_ENA_TX_RX(port) (BIT((port) + A5PSW_PORT_ENA_RX_SHIFT) | \ BIT(port)) @@ -36,7 +37,7 @@ #define A5PSW_INPUT_LEARN_BLOCK(p) BIT(p) #define A5PSW_MGMT_CFG 0x20 -#define A5PSW_MGMT_CFG_DISCARD BIT(7) +#define A5PSW_MGMT_CFG_ENABLE BIT(6) #define A5PSW_MODE_CFG 0x24 #define A5PSW_MODE_STATS_RESET BIT(31) |