aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/dsa
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/dsa')
-rw-r--r--drivers/net/dsa/hirschmann/hellcreek.c15
-rw-r--r--drivers/net/dsa/lan9303-core.c34
-rw-r--r--drivers/net/dsa/lantiq_gswip.c14
-rw-r--r--drivers/net/dsa/microchip/ksz8795.c82
-rw-r--r--drivers/net/dsa/microchip/ksz8795_reg.h4
-rw-r--r--drivers/net/dsa/microchip/ksz_common.h9
-rw-r--r--drivers/net/dsa/mt7530.c1
-rw-r--r--drivers/net/dsa/mv88e6xxx/chip.c2
-rw-r--r--drivers/net/dsa/mv88e6xxx/serdes.c11
-rw-r--r--drivers/net/dsa/qca/ar9331.c87
-rw-r--r--drivers/net/dsa/sja1105/sja1105_dynamic_config.c27
-rw-r--r--drivers/net/dsa/sja1105/sja1105_main.c99
-rw-r--r--drivers/net/dsa/sja1105/sja1105_mdio.c6
13 files changed, 293 insertions, 98 deletions
diff --git a/drivers/net/dsa/hirschmann/hellcreek.c b/drivers/net/dsa/hirschmann/hellcreek.c
index 9fdcc4bde480..7062db6a083c 100644
--- a/drivers/net/dsa/hirschmann/hellcreek.c
+++ b/drivers/net/dsa/hirschmann/hellcreek.c
@@ -912,6 +912,7 @@ static int hellcreek_fdb_dump(struct dsa_switch *ds, int port,
{
struct hellcreek *hellcreek = ds->priv;
u16 entries;
+ int ret = 0;
size_t i;
mutex_lock(&hellcreek->reg_lock);
@@ -943,12 +944,14 @@ static int hellcreek_fdb_dump(struct dsa_switch *ds, int port,
if (!(entry.portmask & BIT(port)))
continue;
- cb(entry.mac, 0, entry.is_static, data);
+ ret = cb(entry.mac, 0, entry.is_static, data);
+ if (ret)
+ break;
}
mutex_unlock(&hellcreek->reg_lock);
- return 0;
+ return ret;
}
static int hellcreek_vlan_filtering(struct dsa_switch *ds, int port,
@@ -1469,9 +1472,6 @@ static void hellcreek_setup_gcl(struct hellcreek *hellcreek, int port,
u16 data;
u8 gates;
- cur++;
- next++;
-
if (i == schedule->num_entries)
gates = initial->gate_mask ^
cur->gate_mask;
@@ -1500,6 +1500,9 @@ static void hellcreek_setup_gcl(struct hellcreek *hellcreek, int port,
(initial->gate_mask <<
TR_GCLCMD_INIT_GATE_STATES_SHIFT);
hellcreek_write(hellcreek, data, TR_GCLCMD);
+
+ cur++;
+ next++;
}
}
@@ -1547,7 +1550,7 @@ static bool hellcreek_schedule_startable(struct hellcreek *hellcreek, int port)
/* Calculate difference to admin base time */
base_time_ns = ktime_to_ns(hellcreek_port->current_schedule->base_time);
- return base_time_ns - current_ns < (s64)8 * NSEC_PER_SEC;
+ return base_time_ns - current_ns < (s64)4 * NSEC_PER_SEC;
}
static void hellcreek_start_schedule(struct hellcreek *hellcreek, int port)
diff --git a/drivers/net/dsa/lan9303-core.c b/drivers/net/dsa/lan9303-core.c
index 344374025426..d7ce281570b5 100644
--- a/drivers/net/dsa/lan9303-core.c
+++ b/drivers/net/dsa/lan9303-core.c
@@ -557,12 +557,12 @@ static int lan9303_alr_make_entry_raw(struct lan9303 *chip, u32 dat0, u32 dat1)
return 0;
}
-typedef void alr_loop_cb_t(struct lan9303 *chip, u32 dat0, u32 dat1,
- int portmap, void *ctx);
+typedef int alr_loop_cb_t(struct lan9303 *chip, u32 dat0, u32 dat1,
+ int portmap, void *ctx);
-static void lan9303_alr_loop(struct lan9303 *chip, alr_loop_cb_t *cb, void *ctx)
+static int lan9303_alr_loop(struct lan9303 *chip, alr_loop_cb_t *cb, void *ctx)
{
- int i;
+ int ret = 0, i;
mutex_lock(&chip->alr_mutex);
lan9303_write_switch_reg(chip, LAN9303_SWE_ALR_CMD,
@@ -582,13 +582,17 @@ static void lan9303_alr_loop(struct lan9303 *chip, alr_loop_cb_t *cb, void *ctx)
LAN9303_ALR_DAT1_PORT_BITOFFS;
portmap = alrport_2_portmap[alrport];
- cb(chip, dat0, dat1, portmap, ctx);
+ ret = cb(chip, dat0, dat1, portmap, ctx);
+ if (ret)
+ break;
lan9303_write_switch_reg(chip, LAN9303_SWE_ALR_CMD,
LAN9303_ALR_CMD_GET_NEXT);
lan9303_write_switch_reg(chip, LAN9303_SWE_ALR_CMD, 0);
}
mutex_unlock(&chip->alr_mutex);
+
+ return ret;
}
static void alr_reg_to_mac(u32 dat0, u32 dat1, u8 mac[6])
@@ -606,18 +610,20 @@ struct del_port_learned_ctx {
};
/* Clear learned (non-static) entry on given port */
-static void alr_loop_cb_del_port_learned(struct lan9303 *chip, u32 dat0,
- u32 dat1, int portmap, void *ctx)
+static int alr_loop_cb_del_port_learned(struct lan9303 *chip, u32 dat0,
+ u32 dat1, int portmap, void *ctx)
{
struct del_port_learned_ctx *del_ctx = ctx;
int port = del_ctx->port;
if (((BIT(port) & portmap) == 0) || (dat1 & LAN9303_ALR_DAT1_STATIC))
- return;
+ return 0;
/* learned entries has only one port, we can just delete */
dat1 &= ~LAN9303_ALR_DAT1_VALID; /* delete entry */
lan9303_alr_make_entry_raw(chip, dat0, dat1);
+
+ return 0;
}
struct port_fdb_dump_ctx {
@@ -626,19 +632,19 @@ struct port_fdb_dump_ctx {
dsa_fdb_dump_cb_t *cb;
};
-static void alr_loop_cb_fdb_port_dump(struct lan9303 *chip, u32 dat0,
- u32 dat1, int portmap, void *ctx)
+static int alr_loop_cb_fdb_port_dump(struct lan9303 *chip, u32 dat0,
+ u32 dat1, int portmap, void *ctx)
{
struct port_fdb_dump_ctx *dump_ctx = ctx;
u8 mac[ETH_ALEN];
bool is_static;
if ((BIT(dump_ctx->port) & portmap) == 0)
- return;
+ return 0;
alr_reg_to_mac(dat0, dat1, mac);
is_static = !!(dat1 & LAN9303_ALR_DAT1_STATIC);
- dump_ctx->cb(mac, 0, is_static, dump_ctx->data);
+ return dump_ctx->cb(mac, 0, is_static, dump_ctx->data);
}
/* Set a static ALR entry. Delete entry if port_map is zero */
@@ -1210,9 +1216,7 @@ static int lan9303_port_fdb_dump(struct dsa_switch *ds, int port,
};
dev_dbg(chip->dev, "%s(%d)\n", __func__, port);
- lan9303_alr_loop(chip, alr_loop_cb_fdb_port_dump, &dump_ctx);
-
- return 0;
+ return lan9303_alr_loop(chip, alr_loop_cb_fdb_port_dump, &dump_ctx);
}
static int lan9303_port_mdb_prepare(struct dsa_switch *ds, int port,
diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c
index 314ae78bbdd6..e78026ef6d8c 100644
--- a/drivers/net/dsa/lantiq_gswip.c
+++ b/drivers/net/dsa/lantiq_gswip.c
@@ -1404,11 +1404,17 @@ static int gswip_port_fdb_dump(struct dsa_switch *ds, int port,
addr[1] = mac_bridge.key[2] & 0xff;
addr[0] = (mac_bridge.key[2] >> 8) & 0xff;
if (mac_bridge.val[1] & GSWIP_TABLE_MAC_BRIDGE_STATIC) {
- if (mac_bridge.val[0] & BIT(port))
- cb(addr, 0, true, data);
+ if (mac_bridge.val[0] & BIT(port)) {
+ err = cb(addr, 0, true, data);
+ if (err)
+ return err;
+ }
} else {
- if (((mac_bridge.val[0] & GENMASK(7, 4)) >> 4) == port)
- cb(addr, 0, false, data);
+ if (((mac_bridge.val[0] & GENMASK(7, 4)) >> 4) == port) {
+ err = cb(addr, 0, false, data);
+ if (err)
+ return err;
+ }
}
}
return 0;
diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
index 560f6843bb65..c5142f86a3c7 100644
--- a/drivers/net/dsa/microchip/ksz8795.c
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -687,8 +687,8 @@ static void ksz8_r_vlan_entries(struct ksz_device *dev, u16 addr)
shifts = ksz8->shifts;
ksz8_r_table(dev, TABLE_VLAN, addr, &data);
- addr *= dev->phy_port_cnt;
- for (i = 0; i < dev->phy_port_cnt; i++) {
+ addr *= 4;
+ for (i = 0; i < 4; i++) {
dev->vlan_cache[addr + i].table[0] = (u16)data;
data >>= shifts[VLAN_TABLE];
}
@@ -702,7 +702,7 @@ static void ksz8_r_vlan_table(struct ksz_device *dev, u16 vid, u16 *vlan)
u64 buf;
data = (u16 *)&buf;
- addr = vid / dev->phy_port_cnt;
+ addr = vid / 4;
index = vid & 3;
ksz8_r_table(dev, TABLE_VLAN, addr, &buf);
*vlan = data[index];
@@ -716,7 +716,7 @@ static void ksz8_w_vlan_table(struct ksz_device *dev, u16 vid, u16 vlan)
u64 buf;
data = (u16 *)&buf;
- addr = vid / dev->phy_port_cnt;
+ addr = vid / 4;
index = vid & 3;
ksz8_r_table(dev, TABLE_VLAN, addr, &buf);
data[index] = vlan;
@@ -1119,24 +1119,67 @@ static int ksz8_port_vlan_filtering(struct dsa_switch *ds, int port, bool flag,
if (ksz_is_ksz88x3(dev))
return -ENOTSUPP;
+ /* Discard packets with VID not enabled on the switch */
ksz_cfg(dev, S_MIRROR_CTRL, SW_VLAN_ENABLE, flag);
+ /* Discard packets with VID not enabled on the ingress port */
+ for (port = 0; port < dev->phy_port_cnt; ++port)
+ ksz_port_cfg(dev, port, REG_PORT_CTRL_2, PORT_INGRESS_FILTER,
+ flag);
+
return 0;
}
+static void ksz8_port_enable_pvid(struct ksz_device *dev, int port, bool state)
+{
+ if (ksz_is_ksz88x3(dev)) {
+ ksz_cfg(dev, REG_SW_INSERT_SRC_PVID,
+ 0x03 << (4 - 2 * port), state);
+ } else {
+ ksz_pwrite8(dev, port, REG_PORT_CTRL_12, state ? 0x0f : 0x00);
+ }
+}
+
static int ksz8_port_vlan_add(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_vlan *vlan,
struct netlink_ext_ack *extack)
{
bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
struct ksz_device *dev = ds->priv;
+ struct ksz_port *p = &dev->ports[port];
u16 data, new_pvid = 0;
u8 fid, member, valid;
if (ksz_is_ksz88x3(dev))
return -ENOTSUPP;
- ksz_port_cfg(dev, port, P_TAG_CTRL, PORT_REMOVE_TAG, untagged);
+ /* If a VLAN is added with untagged flag different from the
+ * port's Remove Tag flag, we need to change the latter.
+ * Ignore VID 0, which is always untagged.
+ * Ignore CPU port, which will always be tagged.
+ */
+ if (untagged != p->remove_tag && vlan->vid != 0 &&
+ port != dev->cpu_port) {
+ unsigned int vid;
+
+ /* Reject attempts to add a VLAN that requires the
+ * Remove Tag flag to be changed, unless there are no
+ * other VLANs currently configured.
+ */
+ for (vid = 1; vid < dev->num_vlans; ++vid) {
+ /* Skip the VID we are going to add or reconfigure */
+ if (vid == vlan->vid)
+ continue;
+
+ ksz8_from_vlan(dev, dev->vlan_cache[vid].table[0],
+ &fid, &member, &valid);
+ if (valid && (member & BIT(port)))
+ return -EINVAL;
+ }
+
+ ksz_port_cfg(dev, port, P_TAG_CTRL, PORT_REMOVE_TAG, untagged);
+ p->remove_tag = untagged;
+ }
ksz8_r_vlan_table(dev, vlan->vid, &data);
ksz8_from_vlan(dev, data, &fid, &member, &valid);
@@ -1160,9 +1203,11 @@ static int ksz8_port_vlan_add(struct dsa_switch *ds, int port,
u16 vid;
ksz_pread16(dev, port, REG_PORT_CTRL_VID, &vid);
- vid &= 0xfff;
+ vid &= ~VLAN_VID_MASK;
vid |= new_pvid;
ksz_pwrite16(dev, port, REG_PORT_CTRL_VID, vid);
+
+ ksz8_port_enable_pvid(dev, port, true);
}
return 0;
@@ -1171,9 +1216,8 @@ static int ksz8_port_vlan_add(struct dsa_switch *ds, int port,
static int ksz8_port_vlan_del(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_vlan *vlan)
{
- bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
struct ksz_device *dev = ds->priv;
- u16 data, pvid, new_pvid = 0;
+ u16 data, pvid;
u8 fid, member, valid;
if (ksz_is_ksz88x3(dev))
@@ -1182,8 +1226,6 @@ static int ksz8_port_vlan_del(struct dsa_switch *ds, int port,
ksz_pread16(dev, port, REG_PORT_CTRL_VID, &pvid);
pvid = pvid & 0xFFF;
- ksz_port_cfg(dev, port, P_TAG_CTRL, PORT_REMOVE_TAG, untagged);
-
ksz8_r_vlan_table(dev, vlan->vid, &data);
ksz8_from_vlan(dev, data, &fid, &member, &valid);
@@ -1195,14 +1237,11 @@ static int ksz8_port_vlan_del(struct dsa_switch *ds, int port,
valid = 0;
}
- if (pvid == vlan->vid)
- new_pvid = 1;
-
ksz8_to_vlan(dev, fid, member, valid, &data);
ksz8_w_vlan_table(dev, vlan->vid, data);
- if (new_pvid != pvid)
- ksz_pwrite16(dev, port, REG_PORT_CTRL_VID, pvid);
+ if (pvid == vlan->vid)
+ ksz8_port_enable_pvid(dev, port, false);
return 0;
}
@@ -1435,6 +1474,9 @@ static int ksz8_setup(struct dsa_switch *ds)
ksz_cfg(dev, S_MIRROR_CTRL, SW_MIRROR_RX_TX, false);
+ if (!ksz_is_ksz88x3(dev))
+ ksz_cfg(dev, REG_SW_CTRL_19, SW_INS_TAG_ENABLE, true);
+
/* set broadcast storm protection 10% rate */
regmap_update_bits(dev->regmap[1], S_REPLACE_VID_CTRL,
BROADCAST_STORM_RATE,
@@ -1717,6 +1759,16 @@ static int ksz8_switch_init(struct ksz_device *dev)
/* set the real number of ports */
dev->ds->num_ports = dev->port_cnt;
+ /* We rely on software untagging on the CPU port, so that we
+ * can support both tagged and untagged VLANs
+ */
+ dev->ds->untag_bridge_pvid = true;
+
+ /* VLAN filtering is partly controlled by the global VLAN
+ * Enable flag
+ */
+ dev->ds->vlan_filtering_is_global = true;
+
return 0;
}
diff --git a/drivers/net/dsa/microchip/ksz8795_reg.h b/drivers/net/dsa/microchip/ksz8795_reg.h
index a32355624f31..6b40bc25f7ff 100644
--- a/drivers/net/dsa/microchip/ksz8795_reg.h
+++ b/drivers/net/dsa/microchip/ksz8795_reg.h
@@ -631,6 +631,10 @@
#define REG_PORT_4_OUT_RATE_3 0xEE
#define REG_PORT_5_OUT_RATE_3 0xFE
+/* 88x3 specific */
+
+#define REG_SW_INSERT_SRC_PVID 0xC2
+
/* PME */
#define SW_PME_OUTPUT_ENABLE BIT(1)
diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h
index 2e6bfd333f50..1597c63988b4 100644
--- a/drivers/net/dsa/microchip/ksz_common.h
+++ b/drivers/net/dsa/microchip/ksz_common.h
@@ -27,6 +27,7 @@ struct ksz_port_mib {
struct ksz_port {
u16 member;
u16 vid_member;
+ bool remove_tag; /* Remove Tag flag set, for ksz8795 only */
int stp_state;
struct phy_device phydev;
@@ -205,12 +206,8 @@ static inline int ksz_read64(struct ksz_device *dev, u32 reg, u64 *val)
int ret;
ret = regmap_bulk_read(dev->regmap[2], reg, value, 2);
- if (!ret) {
- /* Ick! ToDo: Add 64bit R/W to regmap on 32bit systems */
- value[0] = swab32(value[0]);
- value[1] = swab32(value[1]);
- *val = swab64((u64)*value);
- }
+ if (!ret)
+ *val = (u64)value[0] << 32 | value[1];
return ret;
}
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 69f21b71614c..632f0fcc5aa7 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -47,6 +47,7 @@ static const struct mt7530_mib_desc mt7530_mib[] = {
MIB_DESC(2, 0x48, "TxBytes"),
MIB_DESC(1, 0x60, "RxDrop"),
MIB_DESC(1, 0x64, "RxFiltering"),
+ MIB_DESC(1, 0x68, "RxUnicast"),
MIB_DESC(1, 0x6c, "RxMulticast"),
MIB_DESC(1, 0x70, "RxBroadcast"),
MIB_DESC(1, 0x74, "RxAlignErr"),
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index beb41572d04e..272b0535d946 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -2155,7 +2155,7 @@ static int mv88e6xxx_port_vlan_leave(struct mv88e6xxx_chip *chip,
int i, err;
if (!vid)
- return -EOPNOTSUPP;
+ return 0;
err = mv88e6xxx_vtu_get(chip, vid, &vlan);
if (err)
diff --git a/drivers/net/dsa/mv88e6xxx/serdes.c b/drivers/net/dsa/mv88e6xxx/serdes.c
index b1d46dd8eaab..6ea003678798 100644
--- a/drivers/net/dsa/mv88e6xxx/serdes.c
+++ b/drivers/net/dsa/mv88e6xxx/serdes.c
@@ -1277,15 +1277,16 @@ static int mv88e6393x_serdes_port_errata(struct mv88e6xxx_chip *chip, int lane)
int err;
/* mv88e6393x family errata 4.6:
- * Cannot clear PwrDn bit on SERDES on port 0 if device is configured
- * CPU_MGD mode or P0_mode is configured for [x]MII.
- * Workaround: Set Port0 SERDES register 4.F002 bit 5=0 and bit 15=1.
+ * Cannot clear PwrDn bit on SERDES if device is configured CPU_MGD
+ * mode or P0_mode is configured for [x]MII.
+ * Workaround: Set SERDES register 4.F002 bit 5=0 and bit 15=1.
*
* It seems that after this workaround the SERDES is automatically
* powered up (the bit is cleared), so power it down.
*/
- if (lane == MV88E6393X_PORT0_LANE) {
- err = mv88e6390_serdes_read(chip, MV88E6393X_PORT0_LANE,
+ if (lane == MV88E6393X_PORT0_LANE || lane == MV88E6393X_PORT9_LANE ||
+ lane == MV88E6393X_PORT10_LANE) {
+ err = mv88e6390_serdes_read(chip, lane,
MDIO_MMD_PHYXS,
MV88E6393X_SERDES_POC, &reg);
if (err)
diff --git a/drivers/net/dsa/qca/ar9331.c b/drivers/net/dsa/qca/ar9331.c
index ca2ad77b71f1..563d8a279030 100644
--- a/drivers/net/dsa/qca/ar9331.c
+++ b/drivers/net/dsa/qca/ar9331.c
@@ -101,6 +101,23 @@
AR9331_SW_PORT_STATUS_RX_FLOW_EN | AR9331_SW_PORT_STATUS_TX_FLOW_EN | \
AR9331_SW_PORT_STATUS_SPEED_M)
+#define AR9331_SW_REG_PORT_CTRL(_port) (0x104 + (_port) * 0x100)
+#define AR9331_SW_PORT_CTRL_HEAD_EN BIT(11)
+#define AR9331_SW_PORT_CTRL_PORT_STATE GENMASK(2, 0)
+#define AR9331_SW_PORT_CTRL_PORT_STATE_DISABLED 0
+#define AR9331_SW_PORT_CTRL_PORT_STATE_BLOCKING 1
+#define AR9331_SW_PORT_CTRL_PORT_STATE_LISTENING 2
+#define AR9331_SW_PORT_CTRL_PORT_STATE_LEARNING 3
+#define AR9331_SW_PORT_CTRL_PORT_STATE_FORWARD 4
+
+#define AR9331_SW_REG_PORT_VLAN(_port) (0x108 + (_port) * 0x100)
+#define AR9331_SW_PORT_VLAN_8021Q_MODE GENMASK(31, 30)
+#define AR9331_SW_8021Q_MODE_SECURE 3
+#define AR9331_SW_8021Q_MODE_CHECK 2
+#define AR9331_SW_8021Q_MODE_FALLBACK 1
+#define AR9331_SW_8021Q_MODE_NONE 0
+#define AR9331_SW_PORT_VLAN_PORT_VID_MEMBER GENMASK(25, 16)
+
/* MIB registers */
#define AR9331_MIB_COUNTER(x) (0x20000 + ((x) * 0x100))
@@ -371,12 +388,60 @@ static int ar9331_sw_mbus_init(struct ar9331_sw_priv *priv)
return 0;
}
-static int ar9331_sw_setup(struct dsa_switch *ds)
+static int ar9331_sw_setup_port(struct dsa_switch *ds, int port)
{
struct ar9331_sw_priv *priv = (struct ar9331_sw_priv *)ds->priv;
struct regmap *regmap = priv->regmap;
+ u32 port_mask, port_ctrl, val;
int ret;
+ /* Generate default port settings */
+ port_ctrl = FIELD_PREP(AR9331_SW_PORT_CTRL_PORT_STATE,
+ AR9331_SW_PORT_CTRL_PORT_STATE_FORWARD);
+
+ if (dsa_is_cpu_port(ds, port)) {
+ /* CPU port should be allowed to communicate with all user
+ * ports.
+ */
+ port_mask = dsa_user_ports(ds);
+ /* Enable Atheros header on CPU port. This will allow us
+ * communicate with each port separately
+ */
+ port_ctrl |= AR9331_SW_PORT_CTRL_HEAD_EN;
+ } else if (dsa_is_user_port(ds, port)) {
+ /* User ports should communicate only with the CPU port.
+ */
+ port_mask = BIT(dsa_upstream_port(ds, port));
+ } else {
+ /* Other ports do not need to communicate at all */
+ port_mask = 0;
+ }
+
+ val = FIELD_PREP(AR9331_SW_PORT_VLAN_8021Q_MODE,
+ AR9331_SW_8021Q_MODE_NONE) |
+ FIELD_PREP(AR9331_SW_PORT_VLAN_PORT_VID_MEMBER, port_mask);
+
+ ret = regmap_write(regmap, AR9331_SW_REG_PORT_VLAN(port), val);
+ if (ret)
+ goto error;
+
+ ret = regmap_write(regmap, AR9331_SW_REG_PORT_CTRL(port), port_ctrl);
+ if (ret)
+ goto error;
+
+ return 0;
+error:
+ dev_err(priv->dev, "%s: error: %i\n", __func__, ret);
+
+ return ret;
+}
+
+static int ar9331_sw_setup(struct dsa_switch *ds)
+{
+ struct ar9331_sw_priv *priv = (struct ar9331_sw_priv *)ds->priv;
+ struct regmap *regmap = priv->regmap;
+ int ret, i;
+
ret = ar9331_sw_reset(priv);
if (ret)
return ret;
@@ -402,6 +467,12 @@ static int ar9331_sw_setup(struct dsa_switch *ds)
if (ret)
goto error;
+ for (i = 0; i < ds->num_ports; i++) {
+ ret = ar9331_sw_setup_port(ds, i);
+ if (ret)
+ goto error;
+ }
+
ds->configure_vlan_while_not_filtering = false;
return 0;
@@ -837,16 +908,24 @@ static int ar9331_mdio_write(void *ctx, u32 reg, u32 val)
return 0;
}
- ret = __ar9331_mdio_write(sbus, AR9331_SW_MDIO_PHY_MODE_REG, reg, val);
+ /* In case of this switch we work with 32bit registers on top of 16bit
+ * bus. Some registers (for example access to forwarding database) have
+ * trigger bit on the first 16bit half of request, the result and
+ * configuration of request in the second half.
+ * To make it work properly, we should do the second part of transfer
+ * before the first one is done.
+ */
+ ret = __ar9331_mdio_write(sbus, AR9331_SW_MDIO_PHY_MODE_REG, reg + 2,
+ val >> 16);
if (ret < 0)
goto error;
- ret = __ar9331_mdio_write(sbus, AR9331_SW_MDIO_PHY_MODE_REG, reg + 2,
- val >> 16);
+ ret = __ar9331_mdio_write(sbus, AR9331_SW_MDIO_PHY_MODE_REG, reg, val);
if (ret < 0)
goto error;
return 0;
+
error:
dev_err_ratelimited(&sbus->dev, "Bus error. Failed to write register.\n");
return ret;
diff --git a/drivers/net/dsa/sja1105/sja1105_dynamic_config.c b/drivers/net/dsa/sja1105/sja1105_dynamic_config.c
index 56fead68ea9f..147709131c13 100644
--- a/drivers/net/dsa/sja1105/sja1105_dynamic_config.c
+++ b/drivers/net/dsa/sja1105/sja1105_dynamic_config.c
@@ -304,6 +304,15 @@ sja1105pqrs_common_l2_lookup_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd,
hostcmd = SJA1105_HOSTCMD_INVALIDATE;
}
sja1105_packing(p, &hostcmd, 25, 23, size, op);
+}
+
+static void
+sja1105pqrs_l2_lookup_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd,
+ enum packing_op op)
+{
+ int entry_size = SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY;
+
+ sja1105pqrs_common_l2_lookup_cmd_packing(buf, cmd, op, entry_size);
/* Hack - The hardware takes the 'index' field within
* struct sja1105_l2_lookup_entry as the index on which this command
@@ -313,26 +322,18 @@ sja1105pqrs_common_l2_lookup_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd,
* such that our API doesn't need to ask for a full-blown entry
* structure when e.g. a delete is requested.
*/
- sja1105_packing(buf, &cmd->index, 15, 6,
- SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY, op);
-}
-
-static void
-sja1105pqrs_l2_lookup_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd,
- enum packing_op op)
-{
- int size = SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY;
-
- return sja1105pqrs_common_l2_lookup_cmd_packing(buf, cmd, op, size);
+ sja1105_packing(buf, &cmd->index, 15, 6, entry_size, op);
}
static void
sja1110_l2_lookup_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd,
enum packing_op op)
{
- int size = SJA1110_SIZE_L2_LOOKUP_ENTRY;
+ int entry_size = SJA1110_SIZE_L2_LOOKUP_ENTRY;
+
+ sja1105pqrs_common_l2_lookup_cmd_packing(buf, cmd, op, entry_size);
- return sja1105pqrs_common_l2_lookup_cmd_packing(buf, cmd, op, size);
+ sja1105_packing(buf, &cmd->index, 10, 1, entry_size, op);
}
/* The switch is so retarded that it makes our command/entry abstraction
diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c
index e2dc997580a8..49eb0ac41b7d 100644
--- a/drivers/net/dsa/sja1105/sja1105_main.c
+++ b/drivers/net/dsa/sja1105/sja1105_main.c
@@ -1318,10 +1318,11 @@ static int sja1105et_is_fdb_entry_in_bin(struct sja1105_private *priv, int bin,
int sja1105et_fdb_add(struct dsa_switch *ds, int port,
const unsigned char *addr, u16 vid)
{
- struct sja1105_l2_lookup_entry l2_lookup = {0};
+ struct sja1105_l2_lookup_entry l2_lookup = {0}, tmp;
struct sja1105_private *priv = ds->priv;
struct device *dev = ds->dev;
int last_unused = -1;
+ int start, end, i;
int bin, way, rc;
bin = sja1105et_fdb_hash(priv, addr, vid);
@@ -1333,7 +1334,7 @@ int sja1105et_fdb_add(struct dsa_switch *ds, int port,
* mask? If yes, we need to do nothing. If not, we need
* to rewrite the entry by adding this port to it.
*/
- if (l2_lookup.destports & BIT(port))
+ if ((l2_lookup.destports & BIT(port)) && l2_lookup.lockeds)
return 0;
l2_lookup.destports |= BIT(port);
} else {
@@ -1364,6 +1365,7 @@ int sja1105et_fdb_add(struct dsa_switch *ds, int port,
index, NULL, false);
}
}
+ l2_lookup.lockeds = true;
l2_lookup.index = sja1105et_fdb_index(bin, way);
rc = sja1105_dynamic_config_write(priv, BLK_IDX_L2_LOOKUP,
@@ -1372,6 +1374,29 @@ int sja1105et_fdb_add(struct dsa_switch *ds, int port,
if (rc < 0)
return rc;
+ /* Invalidate a dynamically learned entry if that exists */
+ start = sja1105et_fdb_index(bin, 0);
+ end = sja1105et_fdb_index(bin, way);
+
+ for (i = start; i < end; i++) {
+ rc = sja1105_dynamic_config_read(priv, BLK_IDX_L2_LOOKUP,
+ i, &tmp);
+ if (rc == -ENOENT)
+ continue;
+ if (rc)
+ return rc;
+
+ if (tmp.macaddr != ether_addr_to_u64(addr) || tmp.vlanid != vid)
+ continue;
+
+ rc = sja1105_dynamic_config_write(priv, BLK_IDX_L2_LOOKUP,
+ i, NULL, false);
+ if (rc)
+ return rc;
+
+ break;
+ }
+
return sja1105_static_fdb_change(priv, port, &l2_lookup, true);
}
@@ -1413,32 +1438,30 @@ int sja1105et_fdb_del(struct dsa_switch *ds, int port,
int sja1105pqrs_fdb_add(struct dsa_switch *ds, int port,
const unsigned char *addr, u16 vid)
{
- struct sja1105_l2_lookup_entry l2_lookup = {0};
+ struct sja1105_l2_lookup_entry l2_lookup = {0}, tmp;
struct sja1105_private *priv = ds->priv;
int rc, i;
/* Search for an existing entry in the FDB table */
l2_lookup.macaddr = ether_addr_to_u64(addr);
l2_lookup.vlanid = vid;
- l2_lookup.iotag = SJA1105_S_TAG;
l2_lookup.mask_macaddr = GENMASK_ULL(ETH_ALEN * 8 - 1, 0);
- if (priv->vlan_state != SJA1105_VLAN_UNAWARE) {
- l2_lookup.mask_vlanid = VLAN_VID_MASK;
- l2_lookup.mask_iotag = BIT(0);
- } else {
- l2_lookup.mask_vlanid = 0;
- l2_lookup.mask_iotag = 0;
- }
+ l2_lookup.mask_vlanid = VLAN_VID_MASK;
l2_lookup.destports = BIT(port);
+ tmp = l2_lookup;
+
rc = sja1105_dynamic_config_read(priv, BLK_IDX_L2_LOOKUP,
- SJA1105_SEARCH, &l2_lookup);
- if (rc == 0) {
- /* Found and this port is already in the entry's
+ SJA1105_SEARCH, &tmp);
+ if (rc == 0 && tmp.index != SJA1105_MAX_L2_LOOKUP_COUNT - 1) {
+ /* Found a static entry and this port is already in the entry's
* port mask => job done
*/
- if (l2_lookup.destports & BIT(port))
+ if ((tmp.destports & BIT(port)) && tmp.lockeds)
return 0;
+
+ l2_lookup = tmp;
+
/* l2_lookup.index is populated by the switch in case it
* found something.
*/
@@ -1460,16 +1483,46 @@ int sja1105pqrs_fdb_add(struct dsa_switch *ds, int port,
dev_err(ds->dev, "FDB is full, cannot add entry.\n");
return -EINVAL;
}
- l2_lookup.lockeds = true;
l2_lookup.index = i;
skip_finding_an_index:
+ l2_lookup.lockeds = true;
+
rc = sja1105_dynamic_config_write(priv, BLK_IDX_L2_LOOKUP,
l2_lookup.index, &l2_lookup,
true);
if (rc < 0)
return rc;
+ /* The switch learns dynamic entries and looks up the FDB left to
+ * right. It is possible that our addition was concurrent with the
+ * dynamic learning of the same address, so now that the static entry
+ * has been installed, we are certain that address learning for this
+ * particular address has been turned off, so the dynamic entry either
+ * is in the FDB at an index smaller than the static one, or isn't (it
+ * can also be at a larger index, but in that case it is inactive
+ * because the static FDB entry will match first, and the dynamic one
+ * will eventually age out). Search for a dynamically learned address
+ * prior to our static one and invalidate it.
+ */
+ tmp = l2_lookup;
+
+ rc = sja1105_dynamic_config_read(priv, BLK_IDX_L2_LOOKUP,
+ SJA1105_SEARCH, &tmp);
+ if (rc < 0) {
+ dev_err(ds->dev,
+ "port %d failed to read back entry for %pM vid %d: %pe\n",
+ port, addr, vid, ERR_PTR(rc));
+ return rc;
+ }
+
+ if (tmp.index < l2_lookup.index) {
+ rc = sja1105_dynamic_config_write(priv, BLK_IDX_L2_LOOKUP,
+ tmp.index, NULL, false);
+ if (rc < 0)
+ return rc;
+ }
+
return sja1105_static_fdb_change(priv, port, &l2_lookup, true);
}
@@ -1483,15 +1536,8 @@ int sja1105pqrs_fdb_del(struct dsa_switch *ds, int port,
l2_lookup.macaddr = ether_addr_to_u64(addr);
l2_lookup.vlanid = vid;
- l2_lookup.iotag = SJA1105_S_TAG;
l2_lookup.mask_macaddr = GENMASK_ULL(ETH_ALEN * 8 - 1, 0);
- if (priv->vlan_state != SJA1105_VLAN_UNAWARE) {
- l2_lookup.mask_vlanid = VLAN_VID_MASK;
- l2_lookup.mask_iotag = BIT(0);
- } else {
- l2_lookup.mask_vlanid = 0;
- l2_lookup.mask_iotag = 0;
- }
+ l2_lookup.mask_vlanid = VLAN_VID_MASK;
l2_lookup.destports = BIT(port);
rc = sja1105_dynamic_config_read(priv, BLK_IDX_L2_LOOKUP,
@@ -1589,7 +1635,9 @@ static int sja1105_fdb_dump(struct dsa_switch *ds, int port,
/* We need to hide the dsa_8021q VLANs from the user. */
if (priv->vlan_state == SJA1105_VLAN_UNAWARE)
l2_lookup.vlanid = 0;
- cb(macaddr, l2_lookup.vlanid, l2_lookup.lockeds, data);
+ rc = cb(macaddr, l2_lookup.vlanid, l2_lookup.lockeds, data);
+ if (rc)
+ return rc;
}
return 0;
}
@@ -3139,6 +3187,7 @@ static void sja1105_teardown(struct dsa_switch *ds)
}
sja1105_devlink_teardown(ds);
+ sja1105_mdiobus_unregister(ds);
sja1105_flower_teardown(ds);
sja1105_tas_teardown(ds);
sja1105_ptp_clock_unregister(ds);
diff --git a/drivers/net/dsa/sja1105/sja1105_mdio.c b/drivers/net/dsa/sja1105/sja1105_mdio.c
index 19aea8fb76f6..705d3900e43a 100644
--- a/drivers/net/dsa/sja1105/sja1105_mdio.c
+++ b/drivers/net/dsa/sja1105/sja1105_mdio.c
@@ -284,8 +284,7 @@ static int sja1105_mdiobus_base_tx_register(struct sja1105_private *priv,
struct mii_bus *bus;
int rc = 0;
- np = of_find_compatible_node(mdio_node, NULL,
- "nxp,sja1110-base-tx-mdio");
+ np = of_get_compatible_child(mdio_node, "nxp,sja1110-base-tx-mdio");
if (!np)
return 0;
@@ -339,8 +338,7 @@ static int sja1105_mdiobus_base_t1_register(struct sja1105_private *priv,
struct mii_bus *bus;
int rc = 0;
- np = of_find_compatible_node(mdio_node, NULL,
- "nxp,sja1110-base-t1-mdio");
+ np = of_get_compatible_child(mdio_node, "nxp,sja1110-base-t1-mdio");
if (!np)
return 0;
Powered by cgit, Gruvboxed by Blaster4385.