aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/dsa
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/dsa')
-rw-r--r--drivers/net/dsa/b53/b53_common.c14
-rw-r--r--drivers/net/dsa/bcm_sf2.c17
-rw-r--r--drivers/net/dsa/mt7530.c56
-rw-r--r--drivers/net/dsa/sja1105/sja1105_main.c6
-rw-r--r--drivers/net/dsa/xrs700x/xrs700x.c10
5 files changed, 58 insertions, 45 deletions
diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index a162499bcafc..eb443721c58e 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -1105,13 +1105,6 @@ static int b53_setup(struct dsa_switch *ds)
b53_disable_port(ds, port);
}
- /* Let DSA handle the case were multiple bridges span the same switch
- * device and different VLAN awareness settings are requested, which
- * would be breaking filtering semantics for any of the other bridge
- * devices. (not hardware supported)
- */
- ds->vlan_filtering_is_global = true;
-
return b53_setup_devlink_resources(ds);
}
@@ -2664,6 +2657,13 @@ struct b53_device *b53_switch_alloc(struct device *base,
ds->ops = &b53_switch_ops;
ds->untag_bridge_pvid = true;
dev->vlan_enabled = true;
+ /* Let DSA handle the case were multiple bridges span the same switch
+ * device and different VLAN awareness settings are requested, which
+ * would be breaking filtering semantics for any of the other bridge
+ * devices. (not hardware supported)
+ */
+ ds->vlan_filtering_is_global = true;
+
mutex_init(&dev->reg_mutex);
mutex_init(&dev->stats_mutex);
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 5ee8103b8e9c..ba5d546d06aa 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -114,7 +114,10 @@ static void bcm_sf2_imp_setup(struct dsa_switch *ds, int port)
/* Force link status for IMP port */
reg = core_readl(priv, offset);
reg |= (MII_SW_OR | LINK_STS);
- reg &= ~GMII_SPEED_UP_2G;
+ if (priv->type == BCM4908_DEVICE_ID)
+ reg |= GMII_SPEED_UP_2G;
+ else
+ reg &= ~GMII_SPEED_UP_2G;
core_writel(priv, reg, offset);
/* Enable Broadcast, Multicast, Unicast forwarding to IMP port */
@@ -406,7 +409,7 @@ static int bcm_sf2_sw_rst(struct bcm_sf2_priv *priv)
/* The watchdog reset does not work on 7278, we need to hit the
* "external" reset line through the reset controller.
*/
- if (priv->type == BCM7278_DEVICE_ID && !IS_ERR(priv->rcdev)) {
+ if (priv->type == BCM7278_DEVICE_ID) {
ret = reset_control_assert(priv->rcdev);
if (ret)
return ret;
@@ -585,8 +588,10 @@ static u32 bcm_sf2_sw_get_phy_flags(struct dsa_switch *ds, int port)
* in bits 15:8 and the patch level in bits 7:0 which is exactly what
* the REG_PHY_REVISION register layout is.
*/
-
- return priv->hw_params.gphy_rev;
+ if (priv->int_phy_mask & BIT(port))
+ return priv->hw_params.gphy_rev;
+ else
+ return 0;
}
static void bcm_sf2_sw_validate(struct dsa_switch *ds, int port,
@@ -1265,7 +1270,7 @@ static int bcm_sf2_sw_probe(struct platform_device *pdev)
priv->rcdev = devm_reset_control_get_optional_exclusive(&pdev->dev,
"switch");
- if (PTR_ERR(priv->rcdev) == -EPROBE_DEFER)
+ if (IS_ERR(priv->rcdev))
return PTR_ERR(priv->rcdev);
/* Auto-detection using standard registers will not work, so
@@ -1426,7 +1431,7 @@ static int bcm_sf2_sw_remove(struct platform_device *pdev)
bcm_sf2_mdio_unregister(priv);
clk_disable_unprepare(priv->clk_mdiv);
clk_disable_unprepare(priv->clk);
- if (priv->type == BCM7278_DEVICE_ID && !IS_ERR(priv->rcdev))
+ if (priv->type == BCM7278_DEVICE_ID)
reset_control_assert(priv->rcdev);
return 0;
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index c17de2bcf2fe..9871d7cff93a 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -436,34 +436,32 @@ mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface)
TD_DM_DRVP(8) | TD_DM_DRVN(8));
/* Setup core clock for MT7530 */
- if (!trgint) {
- /* Disable MT7530 core clock */
- core_clear(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN);
-
- /* Disable PLL, since phy_device has not yet been created
- * provided for phy_[read,write]_mmd_indirect is called, we
- * provide our own core_write_mmd_indirect to complete this
- * function.
- */
- core_write_mmd_indirect(priv,
- CORE_GSWPLL_GRP1,
- MDIO_MMD_VEND2,
- 0);
-
- /* Set core clock into 500Mhz */
- core_write(priv, CORE_GSWPLL_GRP2,
- RG_GSWPLL_POSDIV_500M(1) |
- RG_GSWPLL_FBKDIV_500M(25));
+ /* Disable MT7530 core clock */
+ core_clear(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN);
- /* Enable PLL */
- core_write(priv, CORE_GSWPLL_GRP1,
- RG_GSWPLL_EN_PRE |
- RG_GSWPLL_POSDIV_200M(2) |
- RG_GSWPLL_FBKDIV_200M(32));
-
- /* Enable MT7530 core clock */
- core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN);
- }
+ /* Disable PLL, since phy_device has not yet been created
+ * provided for phy_[read,write]_mmd_indirect is called, we
+ * provide our own core_write_mmd_indirect to complete this
+ * function.
+ */
+ core_write_mmd_indirect(priv,
+ CORE_GSWPLL_GRP1,
+ MDIO_MMD_VEND2,
+ 0);
+
+ /* Set core clock into 500Mhz */
+ core_write(priv, CORE_GSWPLL_GRP2,
+ RG_GSWPLL_POSDIV_500M(1) |
+ RG_GSWPLL_FBKDIV_500M(25));
+
+ /* Enable PLL */
+ core_write(priv, CORE_GSWPLL_GRP1,
+ RG_GSWPLL_EN_PRE |
+ RG_GSWPLL_POSDIV_200M(2) |
+ RG_GSWPLL_FBKDIV_200M(32));
+
+ /* Enable MT7530 core clock */
+ core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN);
/* Setup the MT7530 TRGMII Tx Clock */
core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN);
@@ -1624,6 +1622,7 @@ mtk_get_tag_protocol(struct dsa_switch *ds, int port,
}
}
+#ifdef CONFIG_GPIOLIB
static inline u32
mt7530_gpio_to_bit(unsigned int offset)
{
@@ -1726,6 +1725,7 @@ mt7530_setup_gpio(struct mt7530_priv *priv)
return devm_gpiochip_add_data(dev, gc, priv);
}
+#endif /* CONFIG_GPIOLIB */
static int
mt7530_setup(struct dsa_switch *ds)
@@ -1868,11 +1868,13 @@ mt7530_setup(struct dsa_switch *ds)
}
}
+#ifdef CONFIG_GPIOLIB
if (of_property_read_bool(priv->dev->of_node, "gpio-controller")) {
ret = mt7530_setup_gpio(priv);
if (ret)
return ret;
}
+#endif /* CONFIG_GPIOLIB */
mt7530_setup_port5(ds, interface);
diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c
index 7692338730df..51ea104c63bb 100644
--- a/drivers/net/dsa/sja1105/sja1105_main.c
+++ b/drivers/net/dsa/sja1105/sja1105_main.c
@@ -1922,7 +1922,7 @@ out_unlock_ptp:
speed = SPEED_1000;
else if (bmcr & BMCR_SPEED100)
speed = SPEED_100;
- else if (bmcr & BMCR_SPEED10)
+ else
speed = SPEED_10;
sja1105_sgmii_pcs_force_speed(priv, speed);
@@ -3369,14 +3369,14 @@ static int sja1105_port_ucast_bcast_flood(struct sja1105_private *priv, int to,
if (flags.val & BR_FLOOD)
priv->ucast_egress_floods |= BIT(to);
else
- priv->ucast_egress_floods |= BIT(to);
+ priv->ucast_egress_floods &= ~BIT(to);
}
if (flags.mask & BR_BCAST_FLOOD) {
if (flags.val & BR_BCAST_FLOOD)
priv->bcast_egress_floods |= BIT(to);
else
- priv->bcast_egress_floods |= BIT(to);
+ priv->bcast_egress_floods &= ~BIT(to);
}
return sja1105_manage_flood_domains(priv);
diff --git a/drivers/net/dsa/xrs700x/xrs700x.c b/drivers/net/dsa/xrs700x/xrs700x.c
index f025f968f96d..fde6e99274b6 100644
--- a/drivers/net/dsa/xrs700x/xrs700x.c
+++ b/drivers/net/dsa/xrs700x/xrs700x.c
@@ -528,7 +528,10 @@ static int xrs700x_hsr_join(struct dsa_switch *ds, int port,
return -EOPNOTSUPP;
dsa_hsr_foreach_port(dp, ds, hsr) {
- partner = dp;
+ if (dp->index != port) {
+ partner = dp;
+ break;
+ }
}
/* We can't enable redundancy on the switch until both
@@ -582,7 +585,10 @@ static int xrs700x_hsr_leave(struct dsa_switch *ds, int port,
unsigned int val;
dsa_hsr_foreach_port(dp, ds, hsr) {
- partner = dp;
+ if (dp->index != port) {
+ partner = dp;
+ break;
+ }
}
if (!partner)
Powered by cgit, Gruvboxed by Blaster4385.