aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/dsa
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/dsa')
-rw-r--r--drivers/net/dsa/b53/b53_mmap.c2
-rw-r--r--drivers/net/dsa/microchip/ksz_common.c2
-rw-r--r--drivers/net/dsa/mt7530.c87
-rw-r--r--drivers/net/dsa/mv88e6xxx/chip.c16
4 files changed, 60 insertions, 47 deletions
diff --git a/drivers/net/dsa/b53/b53_mmap.c b/drivers/net/dsa/b53/b53_mmap.c
index e968322dfbf0..70887e0aece3 100644
--- a/drivers/net/dsa/b53/b53_mmap.c
+++ b/drivers/net/dsa/b53/b53_mmap.c
@@ -263,7 +263,7 @@ static int b53_mmap_probe_of(struct platform_device *pdev,
if (of_property_read_u32(of_port, "reg", &reg))
continue;
- if (reg < B53_CPU_PORT)
+ if (reg < B53_N_PORTS)
pdata->enabled_ports |= BIT(reg);
}
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index 729b36eeb2c4..7fc2155d93d6 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -319,7 +319,7 @@ static const u16 ksz8795_regs[] = {
[S_BROADCAST_CTRL] = 0x06,
[S_MULTICAST_CTRL] = 0x04,
[P_XMII_CTRL_0] = 0x06,
- [P_XMII_CTRL_1] = 0x56,
+ [P_XMII_CTRL_1] = 0x06,
};
static const u32 ksz8795_masks[] = {
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index a508402c4ecb..02410ac439b7 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -396,6 +396,9 @@ mt7530_fdb_write(struct mt7530_priv *priv, u16 vid,
/* Set up switch core clock for MT7530 */
static void mt7530_pll_setup(struct mt7530_priv *priv)
{
+ /* Disable core clock */
+ core_clear(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN);
+
/* Disable PLL */
core_write(priv, CORE_GSWPLL_GRP1, 0);
@@ -409,14 +412,19 @@ static void mt7530_pll_setup(struct mt7530_priv *priv)
RG_GSWPLL_EN_PRE |
RG_GSWPLL_POSDIV_200M(2) |
RG_GSWPLL_FBKDIV_200M(32));
+
+ udelay(20);
+
+ /* Enable core clock */
+ core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN);
}
-/* Setup TX circuit including relevant PAD and driving */
+/* Setup port 6 interface mode and TRGMII TX circuit */
static int
mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface)
{
struct mt7530_priv *priv = ds->priv;
- u32 ncpo1, ssc_delta, trgint, i, xtal;
+ u32 ncpo1, ssc_delta, trgint, xtal;
xtal = mt7530_read(priv, MT7530_MHWTRAP) & HWTRAP_XTAL_MASK;
@@ -430,11 +438,13 @@ mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface)
switch (interface) {
case PHY_INTERFACE_MODE_RGMII:
trgint = 0;
- /* PLL frequency: 125MHz */
- ncpo1 = 0x0c80;
break;
case PHY_INTERFACE_MODE_TRGMII:
trgint = 1;
+ if (xtal == HWTRAP_XTAL_25MHZ)
+ ssc_delta = 0x57;
+ else
+ ssc_delta = 0x87;
if (priv->id == ID_MT7621) {
/* PLL frequency: 150MHz: 1.2GBit */
if (xtal == HWTRAP_XTAL_40MHZ)
@@ -454,46 +464,32 @@ mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface)
return -EINVAL;
}
- if (xtal == HWTRAP_XTAL_25MHZ)
- ssc_delta = 0x57;
- else
- ssc_delta = 0x87;
-
mt7530_rmw(priv, MT7530_P6ECR, P6_INTF_MODE_MASK,
P6_INTF_MODE(trgint));
- /* Lower Tx Driving for TRGMII path */
- for (i = 0 ; i < NUM_TRGMII_CTRL ; i++)
- mt7530_write(priv, MT7530_TRGMII_TD_ODT(i),
- TD_DM_DRVP(8) | TD_DM_DRVN(8));
+ if (trgint) {
+ /* Disable the MT7530 TRGMII clocks */
+ core_clear(priv, CORE_TRGMII_GSW_CLK_CG, REG_TRGMIICK_EN);
+
+ /* Setup the MT7530 TRGMII Tx Clock */
+ core_write(priv, CORE_PLL_GROUP5, RG_LCDDS_PCW_NCPO1(ncpo1));
+ core_write(priv, CORE_PLL_GROUP6, RG_LCDDS_PCW_NCPO0(0));
+ core_write(priv, CORE_PLL_GROUP10, RG_LCDDS_SSC_DELTA(ssc_delta));
+ core_write(priv, CORE_PLL_GROUP11, RG_LCDDS_SSC_DELTA1(ssc_delta));
+ core_write(priv, CORE_PLL_GROUP4,
+ RG_SYSPLL_DDSFBK_EN | RG_SYSPLL_BIAS_EN |
+ RG_SYSPLL_BIAS_LPF_EN);
+ core_write(priv, CORE_PLL_GROUP2,
+ RG_SYSPLL_EN_NORMAL | RG_SYSPLL_VODEN |
+ RG_SYSPLL_POSDIV(1));
+ core_write(priv, CORE_PLL_GROUP7,
+ RG_LCDDS_PCW_NCPO_CHG | RG_LCCDS_C(3) |
+ RG_LCDDS_PWDB | RG_LCDDS_ISO_EN);
+
+ /* Enable the MT7530 TRGMII clocks */
+ core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_TRGMIICK_EN);
+ }
- /* Disable MT7530 core and TRGMII Tx clocks */
- core_clear(priv, CORE_TRGMII_GSW_CLK_CG,
- REG_GSWCK_EN | REG_TRGMIICK_EN);
-
- /* Setup the MT7530 TRGMII Tx Clock */
- core_write(priv, CORE_PLL_GROUP5, RG_LCDDS_PCW_NCPO1(ncpo1));
- core_write(priv, CORE_PLL_GROUP6, RG_LCDDS_PCW_NCPO0(0));
- core_write(priv, CORE_PLL_GROUP10, RG_LCDDS_SSC_DELTA(ssc_delta));
- core_write(priv, CORE_PLL_GROUP11, RG_LCDDS_SSC_DELTA1(ssc_delta));
- core_write(priv, CORE_PLL_GROUP4,
- RG_SYSPLL_DDSFBK_EN | RG_SYSPLL_BIAS_EN |
- RG_SYSPLL_BIAS_LPF_EN);
- core_write(priv, CORE_PLL_GROUP2,
- RG_SYSPLL_EN_NORMAL | RG_SYSPLL_VODEN |
- RG_SYSPLL_POSDIV(1));
- core_write(priv, CORE_PLL_GROUP7,
- RG_LCDDS_PCW_NCPO_CHG | RG_LCCDS_C(3) |
- RG_LCDDS_PWDB | RG_LCDDS_ISO_EN);
-
- /* Enable MT7530 core and TRGMII Tx clocks */
- core_set(priv, CORE_TRGMII_GSW_CLK_CG,
- REG_GSWCK_EN | REG_TRGMIICK_EN);
-
- if (!trgint)
- for (i = 0 ; i < NUM_TRGMII_CTRL; i++)
- mt7530_rmw(priv, MT7530_TRGMII_RD(i),
- RD_TAP_MASK, RD_TAP(16));
return 0;
}
@@ -2201,7 +2197,16 @@ mt7530_setup(struct dsa_switch *ds)
mt7530_pll_setup(priv);
- /* Enable Port 6 only; P5 as GMAC5 which currently is not supported */
+ /* Lower Tx driving for TRGMII path */
+ for (i = 0; i < NUM_TRGMII_CTRL; i++)
+ mt7530_write(priv, MT7530_TRGMII_TD_ODT(i),
+ TD_DM_DRVP(8) | TD_DM_DRVN(8));
+
+ for (i = 0; i < NUM_TRGMII_CTRL; i++)
+ mt7530_rmw(priv, MT7530_TRGMII_RD(i),
+ RD_TAP_MASK, RD_TAP(16));
+
+ /* Enable port 6 */
val = mt7530_read(priv, MT7530_MHWTRAP);
val &= ~MHWTRAP_P6_DIS & ~MHWTRAP_PHY_ACCESS;
val |= MHWTRAP_MANUAL;
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 0a5d6c7bb128..30383c4f8fd0 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -3549,7 +3549,7 @@ static int mv88e6xxx_get_max_mtu(struct dsa_switch *ds, int port)
return 10240 - VLAN_ETH_HLEN - EDSA_HLEN - ETH_FCS_LEN;
else if (chip->info->ops->set_max_frame_size)
return 1632 - VLAN_ETH_HLEN - EDSA_HLEN - ETH_FCS_LEN;
- return 1522 - VLAN_ETH_HLEN - EDSA_HLEN - ETH_FCS_LEN;
+ return ETH_DATA_LEN;
}
static int mv88e6xxx_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
@@ -3557,6 +3557,17 @@ static int mv88e6xxx_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
struct mv88e6xxx_chip *chip = ds->priv;
int ret = 0;
+ /* For families where we don't know how to alter the MTU,
+ * just accept any value up to ETH_DATA_LEN
+ */
+ if (!chip->info->ops->port_set_jumbo_size &&
+ !chip->info->ops->set_max_frame_size) {
+ if (new_mtu > ETH_DATA_LEN)
+ return -EINVAL;
+
+ return 0;
+ }
+
if (dsa_is_dsa_port(ds, port) || dsa_is_cpu_port(ds, port))
new_mtu += EDSA_HLEN;
@@ -3565,9 +3576,6 @@ static int mv88e6xxx_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
ret = chip->info->ops->port_set_jumbo_size(chip, port, new_mtu);
else if (chip->info->ops->set_max_frame_size)
ret = chip->info->ops->set_max_frame_size(chip, new_mtu);
- else
- if (new_mtu > 1522)
- ret = -EINVAL;
mv88e6xxx_reg_unlock(chip);
return ret;
Powered by cgit, Gruvboxed by Blaster4385.