diff options
Diffstat (limited to 'drivers/net/dsa/realtek')
| -rw-r--r-- | drivers/net/dsa/realtek/realtek-mdio.c | 5 | ||||
| -rw-r--r-- | drivers/net/dsa/realtek/rtl8365mb.c | 40 |
2 files changed, 40 insertions, 5 deletions
diff --git a/drivers/net/dsa/realtek/realtek-mdio.c b/drivers/net/dsa/realtek/realtek-mdio.c index 3e54fac5f902..5a8fe707ca25 100644 --- a/drivers/net/dsa/realtek/realtek-mdio.c +++ b/drivers/net/dsa/realtek/realtek-mdio.c @@ -21,6 +21,7 @@ #include <linux/module.h> #include <linux/of_device.h> +#include <linux/overflow.h> #include <linux/regmap.h> #include "realtek.h" @@ -152,7 +153,9 @@ static int realtek_mdio_probe(struct mdio_device *mdiodev) if (!var) return -EINVAL; - priv = devm_kzalloc(&mdiodev->dev, sizeof(*priv), GFP_KERNEL); + priv = devm_kzalloc(&mdiodev->dev, + size_add(sizeof(*priv), var->chip_data_sz), + GFP_KERNEL); if (!priv) return -ENOMEM; diff --git a/drivers/net/dsa/realtek/rtl8365mb.c b/drivers/net/dsa/realtek/rtl8365mb.c index da31d8b839ac..41ea3b5a42b1 100644 --- a/drivers/net/dsa/realtek/rtl8365mb.c +++ b/drivers/net/dsa/realtek/rtl8365mb.c @@ -98,6 +98,7 @@ #include <linux/of_irq.h> #include <linux/regmap.h> #include <linux/if_bridge.h> +#include <linux/if_vlan.h> #include "realtek.h" @@ -267,6 +268,7 @@ /* Maximum packet length register */ #define RTL8365MB_CFG0_MAX_LEN_REG 0x088C #define RTL8365MB_CFG0_MAX_LEN_MASK 0x3FFF +#define RTL8365MB_CFG0_MAX_LEN_MAX 0x3FFF /* Port learning limit registers */ #define RTL8365MB_LUT_PORT_LEARN_LIMIT_BASE 0x0A20 @@ -1135,6 +1137,35 @@ static void rtl8365mb_phylink_mac_link_up(struct dsa_switch *ds, int port, } } +static int rtl8365mb_port_change_mtu(struct dsa_switch *ds, int port, + int new_mtu) +{ + struct realtek_priv *priv = ds->priv; + int frame_size; + + /* When a new MTU is set, DSA always sets the CPU port's MTU to the + * largest MTU of the slave ports. Because the switch only has a global + * RX length register, only allowing CPU port here is enough. + */ + if (!dsa_is_cpu_port(ds, port)) + return 0; + + frame_size = new_mtu + VLAN_ETH_HLEN + ETH_FCS_LEN; + + dev_dbg(priv->dev, "changing mtu to %d (frame size: %d)\n", + new_mtu, frame_size); + + return regmap_update_bits(priv->map, RTL8365MB_CFG0_MAX_LEN_REG, + RTL8365MB_CFG0_MAX_LEN_MASK, + FIELD_PREP(RTL8365MB_CFG0_MAX_LEN_MASK, + frame_size)); +} + +static int rtl8365mb_port_max_mtu(struct dsa_switch *ds, int port) +{ + return RTL8365MB_CFG0_MAX_LEN_MAX - VLAN_ETH_HLEN - ETH_FCS_LEN; +} + static void rtl8365mb_port_stp_state_set(struct dsa_switch *ds, int port, u8 state) { @@ -1980,10 +2011,7 @@ static int rtl8365mb_setup(struct dsa_switch *ds) p->index = i; } - /* Set maximum packet length to 1536 bytes */ - ret = regmap_update_bits(priv->map, RTL8365MB_CFG0_MAX_LEN_REG, - RTL8365MB_CFG0_MAX_LEN_MASK, - FIELD_PREP(RTL8365MB_CFG0_MAX_LEN_MASK, 1536)); + ret = rtl8365mb_port_change_mtu(ds, cpu->trap_port, ETH_DATA_LEN); if (ret) goto out_teardown_irq; @@ -2103,6 +2131,8 @@ static const struct dsa_switch_ops rtl8365mb_switch_ops_smi = { .get_eth_mac_stats = rtl8365mb_get_mac_stats, .get_eth_ctrl_stats = rtl8365mb_get_ctrl_stats, .get_stats64 = rtl8365mb_get_stats64, + .port_change_mtu = rtl8365mb_port_change_mtu, + .port_max_mtu = rtl8365mb_port_max_mtu, }; static const struct dsa_switch_ops rtl8365mb_switch_ops_mdio = { @@ -2124,6 +2154,8 @@ static const struct dsa_switch_ops rtl8365mb_switch_ops_mdio = { .get_eth_mac_stats = rtl8365mb_get_mac_stats, .get_eth_ctrl_stats = rtl8365mb_get_ctrl_stats, .get_stats64 = rtl8365mb_get_stats64, + .port_change_mtu = rtl8365mb_port_change_mtu, + .port_max_mtu = rtl8365mb_port_max_mtu, }; static const struct realtek_ops rtl8365mb_ops = { |