diff options
Diffstat (limited to 'drivers/net/dsa/microchip/ksz_common.c')
-rw-r--r-- | drivers/net/dsa/microchip/ksz_common.c | 372 |
1 files changed, 273 insertions, 99 deletions
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c index 3fed406fb46a..1e0085cd9a9a 100644 --- a/drivers/net/dsa/microchip/ksz_common.c +++ b/drivers/net/dsa/microchip/ksz_common.c @@ -24,10 +24,12 @@ #include <linux/of_net.h> #include <linux/micrel_phy.h> #include <net/dsa.h> +#include <net/ieee8021q.h> #include <net/pkt_cls.h> #include <net/switchdev.h> #include "ksz_common.h" +#include "ksz_dcb.h" #include "ksz_ptp.h" #include "ksz8.h" #include "ksz9477.h" @@ -253,6 +255,28 @@ static const struct ksz_drive_strength ksz8830_drive_strengths[] = { { KSZ8873_DRIVE_STRENGTH_16MA, 16000 }, }; +static void ksz8830_phylink_mac_config(struct phylink_config *config, + unsigned int mode, + const struct phylink_link_state *state); +static void ksz_phylink_mac_config(struct phylink_config *config, + unsigned int mode, + const struct phylink_link_state *state); +static void ksz_phylink_mac_link_down(struct phylink_config *config, + unsigned int mode, + phy_interface_t interface); + +static const struct phylink_mac_ops ksz8830_phylink_mac_ops = { + .mac_config = ksz8830_phylink_mac_config, + .mac_link_down = ksz_phylink_mac_link_down, + .mac_link_up = ksz8_phylink_mac_link_up, +}; + +static const struct phylink_mac_ops ksz8_phylink_mac_ops = { + .mac_config = ksz_phylink_mac_config, + .mac_link_down = ksz_phylink_mac_link_down, + .mac_link_up = ksz8_phylink_mac_link_up, +}; + static const struct ksz_dev_ops ksz8_dev_ops = { .setup = ksz8_setup, .get_port_addr = ksz8_get_port_addr, @@ -285,13 +309,19 @@ static const struct ksz_dev_ops ksz8_dev_ops = { .change_mtu = ksz8_change_mtu, }; -static void ksz9477_phylink_mac_link_up(struct ksz_device *dev, int port, +static void ksz9477_phylink_mac_link_up(struct phylink_config *config, + struct phy_device *phydev, unsigned int mode, phy_interface_t interface, - struct phy_device *phydev, int speed, - int duplex, bool tx_pause, + int speed, int duplex, bool tx_pause, bool rx_pause); +static const struct phylink_mac_ops ksz9477_phylink_mac_ops = { + .mac_config = ksz_phylink_mac_config, + .mac_link_down = ksz_phylink_mac_link_down, + .mac_link_up = ksz9477_phylink_mac_link_up, +}; + static const struct ksz_dev_ops ksz9477_dev_ops = { .setup = ksz9477_setup, .get_port_addr = ksz9477_get_port_addr, @@ -318,7 +348,6 @@ static const struct ksz_dev_ops ksz9477_dev_ops = { .mdb_add = ksz9477_mdb_add, .mdb_del = ksz9477_mdb_del, .change_mtu = ksz9477_change_mtu, - .phylink_mac_link_up = ksz9477_phylink_mac_link_up, .get_wol = ksz9477_get_wol, .set_wol = ksz9477_set_wol, .wol_pre_shutdown = ksz9477_wol_pre_shutdown, @@ -330,6 +359,12 @@ static const struct ksz_dev_ops ksz9477_dev_ops = { .exit = ksz9477_switch_exit, }; +static const struct phylink_mac_ops lan937x_phylink_mac_ops = { + .mac_config = ksz_phylink_mac_config, + .mac_link_down = ksz_phylink_mac_link_down, + .mac_link_up = ksz9477_phylink_mac_link_up, +}; + static const struct ksz_dev_ops lan937x_dev_ops = { .setup = lan937x_setup, .teardown = lan937x_teardown, @@ -358,7 +393,6 @@ static const struct ksz_dev_ops lan937x_dev_ops = { .mdb_add = ksz9477_mdb_add, .mdb_del = ksz9477_mdb_del, .change_mtu = lan937x_change_mtu, - .phylink_mac_link_up = ksz9477_phylink_mac_link_up, .config_cpu_port = lan937x_config_cpu_port, .tc_cbs_set_cinc = lan937x_tc_cbs_set_cinc, .enable_stp_addr = ksz9477_enable_stp_addr, @@ -1193,9 +1227,10 @@ const struct ksz_chip_data ksz_switch_chips[] = { .port_cnt = 3, /* total port count */ .port_nirqs = 3, .num_tx_queues = 4, + .num_ipms = 8, .tc_cbs_supported = true, - .tc_ets_supported = true, .ops = &ksz9477_dev_ops, + .phylink_mac_ops = &ksz9477_phylink_mac_ops, .mib_names = ksz9477_mib_names, .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), .reg_mib_cnt = MIB_COUNTER_NUM, @@ -1222,7 +1257,9 @@ const struct ksz_chip_data ksz_switch_chips[] = { .cpu_ports = 0x10, /* can be configured as cpu port */ .port_cnt = 5, /* total cpu and user ports */ .num_tx_queues = 4, + .num_ipms = 4, .ops = &ksz8_dev_ops, + .phylink_mac_ops = &ksz8_phylink_mac_ops, .ksz87xx_eee_link_erratum = true, .mib_names = ksz9477_mib_names, .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), @@ -1261,7 +1298,9 @@ const struct ksz_chip_data ksz_switch_chips[] = { .cpu_ports = 0x10, /* can be configured as cpu port */ .port_cnt = 5, /* total cpu and user ports */ .num_tx_queues = 4, + .num_ipms = 4, .ops = &ksz8_dev_ops, + .phylink_mac_ops = &ksz8_phylink_mac_ops, .ksz87xx_eee_link_erratum = true, .mib_names = ksz9477_mib_names, .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), @@ -1286,7 +1325,9 @@ const struct ksz_chip_data ksz_switch_chips[] = { .cpu_ports = 0x10, /* can be configured as cpu port */ .port_cnt = 5, /* total cpu and user ports */ .num_tx_queues = 4, + .num_ipms = 4, .ops = &ksz8_dev_ops, + .phylink_mac_ops = &ksz8_phylink_mac_ops, .ksz87xx_eee_link_erratum = true, .mib_names = ksz9477_mib_names, .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), @@ -1311,7 +1352,9 @@ const struct ksz_chip_data ksz_switch_chips[] = { .cpu_ports = 0x4, /* can be configured as cpu port */ .port_cnt = 3, .num_tx_queues = 4, + .num_ipms = 4, .ops = &ksz8_dev_ops, + .phylink_mac_ops = &ksz8830_phylink_mac_ops, .mib_names = ksz88xx_mib_names, .mib_cnt = ARRAY_SIZE(ksz88xx_mib_names), .reg_mib_cnt = MIB_COUNTER_NUM, @@ -1335,9 +1378,10 @@ const struct ksz_chip_data ksz_switch_chips[] = { .port_cnt = 7, /* total physical port count */ .port_nirqs = 4, .num_tx_queues = 4, + .num_ipms = 8, .tc_cbs_supported = true, - .tc_ets_supported = true, .ops = &ksz9477_dev_ops, + .phylink_mac_ops = &ksz9477_phylink_mac_ops, .mib_names = ksz9477_mib_names, .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), .reg_mib_cnt = MIB_COUNTER_NUM, @@ -1369,7 +1413,9 @@ const struct ksz_chip_data ksz_switch_chips[] = { .port_cnt = 6, /* total physical port count */ .port_nirqs = 2, .num_tx_queues = 4, + .num_ipms = 8, .ops = &ksz9477_dev_ops, + .phylink_mac_ops = &ksz9477_phylink_mac_ops, .mib_names = ksz9477_mib_names, .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), .reg_mib_cnt = MIB_COUNTER_NUM, @@ -1401,7 +1447,9 @@ const struct ksz_chip_data ksz_switch_chips[] = { .port_cnt = 7, /* total physical port count */ .port_nirqs = 2, .num_tx_queues = 4, + .num_ipms = 8, .ops = &ksz9477_dev_ops, + .phylink_mac_ops = &ksz9477_phylink_mac_ops, .mib_names = ksz9477_mib_names, .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), .reg_mib_cnt = MIB_COUNTER_NUM, @@ -1431,7 +1479,9 @@ const struct ksz_chip_data ksz_switch_chips[] = { .port_cnt = 3, /* total port count */ .port_nirqs = 2, .num_tx_queues = 4, + .num_ipms = 8, .ops = &ksz9477_dev_ops, + .phylink_mac_ops = &ksz9477_phylink_mac_ops, .mib_names = ksz9477_mib_names, .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), .reg_mib_cnt = MIB_COUNTER_NUM, @@ -1457,9 +1507,10 @@ const struct ksz_chip_data ksz_switch_chips[] = { .port_cnt = 3, /* total port count */ .port_nirqs = 3, .num_tx_queues = 4, + .num_ipms = 8, .tc_cbs_supported = true, - .tc_ets_supported = true, .ops = &ksz9477_dev_ops, + .phylink_mac_ops = &ksz9477_phylink_mac_ops, .mib_names = ksz9477_mib_names, .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), .reg_mib_cnt = MIB_COUNTER_NUM, @@ -1475,6 +1526,40 @@ const struct ksz_chip_data ksz_switch_chips[] = { .gbit_capable = {true, true, true}, }, + [KSZ8567] = { + .chip_id = KSZ8567_CHIP_ID, + .dev_name = "KSZ8567", + .num_vlans = 4096, + .num_alus = 4096, + .num_statics = 16, + .cpu_ports = 0x7F, /* can be configured as cpu port */ + .port_cnt = 7, /* total port count */ + .port_nirqs = 3, + .num_tx_queues = 4, + .num_ipms = 8, + .tc_cbs_supported = true, + .ops = &ksz9477_dev_ops, + .phylink_mac_ops = &ksz9477_phylink_mac_ops, + .mib_names = ksz9477_mib_names, + .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), + .reg_mib_cnt = MIB_COUNTER_NUM, + .regs = ksz9477_regs, + .masks = ksz9477_masks, + .shifts = ksz9477_shifts, + .xmii_ctrl0 = ksz9477_xmii_ctrl0, + .xmii_ctrl1 = ksz9477_xmii_ctrl1, + .supports_mii = {false, false, false, false, + false, true, true}, + .supports_rmii = {false, false, false, false, + false, true, true}, + .supports_rgmii = {false, false, false, false, + false, true, true}, + .internal_phy = {true, true, true, true, + true, false, false}, + .gbit_capable = {false, false, false, false, false, + true, true}, + }, + [KSZ9567] = { .chip_id = KSZ9567_CHIP_ID, .dev_name = "KSZ9567", @@ -1485,8 +1570,8 @@ const struct ksz_chip_data ksz_switch_chips[] = { .port_cnt = 7, /* total physical port count */ .port_nirqs = 3, .num_tx_queues = 4, + .num_ipms = 8, .tc_cbs_supported = true, - .tc_ets_supported = true, .ops = &ksz9477_dev_ops, .mib_names = ksz9477_mib_names, .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), @@ -1517,9 +1602,10 @@ const struct ksz_chip_data ksz_switch_chips[] = { .port_cnt = 5, /* total physical port count */ .port_nirqs = 6, .num_tx_queues = 8, + .num_ipms = 8, .tc_cbs_supported = true, - .tc_ets_supported = true, .ops = &lan937x_dev_ops, + .phylink_mac_ops = &lan937x_phylink_mac_ops, .mib_names = ksz9477_mib_names, .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), .reg_mib_cnt = MIB_COUNTER_NUM, @@ -1544,9 +1630,10 @@ const struct ksz_chip_data ksz_switch_chips[] = { .port_cnt = 6, /* total physical port count */ .port_nirqs = 6, .num_tx_queues = 8, + .num_ipms = 8, .tc_cbs_supported = true, - .tc_ets_supported = true, .ops = &lan937x_dev_ops, + .phylink_mac_ops = &lan937x_phylink_mac_ops, .mib_names = ksz9477_mib_names, .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), .reg_mib_cnt = MIB_COUNTER_NUM, @@ -1571,9 +1658,10 @@ const struct ksz_chip_data ksz_switch_chips[] = { .port_cnt = 8, /* total physical port count */ .port_nirqs = 6, .num_tx_queues = 8, + .num_ipms = 8, .tc_cbs_supported = true, - .tc_ets_supported = true, .ops = &lan937x_dev_ops, + .phylink_mac_ops = &lan937x_phylink_mac_ops, .mib_names = ksz9477_mib_names, .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), .reg_mib_cnt = MIB_COUNTER_NUM, @@ -1602,9 +1690,10 @@ const struct ksz_chip_data ksz_switch_chips[] = { .port_cnt = 5, /* total physical port count */ .port_nirqs = 6, .num_tx_queues = 8, + .num_ipms = 8, .tc_cbs_supported = true, - .tc_ets_supported = true, .ops = &lan937x_dev_ops, + .phylink_mac_ops = &lan937x_phylink_mac_ops, .mib_names = ksz9477_mib_names, .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), .reg_mib_cnt = MIB_COUNTER_NUM, @@ -1633,9 +1722,10 @@ const struct ksz_chip_data ksz_switch_chips[] = { .port_cnt = 8, /* total physical port count */ .port_nirqs = 6, .num_tx_queues = 8, + .num_ipms = 8, .tc_cbs_supported = true, - .tc_ets_supported = true, .ops = &lan937x_dev_ops, + .phylink_mac_ops = &lan937x_phylink_mac_ops, .mib_names = ksz9477_mib_names, .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), .reg_mib_cnt = MIB_COUNTER_NUM, @@ -1672,15 +1762,23 @@ static const struct ksz_chip_data *ksz_lookup_info(unsigned int prod_num) static int ksz_check_device_id(struct ksz_device *dev) { - const struct ksz_chip_data *dt_chip_data; + const struct ksz_chip_data *expected_chip_data; + u32 expected_chip_id; - dt_chip_data = of_device_get_match_data(dev->dev); + if (dev->pdata) { + expected_chip_id = dev->pdata->chip_id; + expected_chip_data = ksz_lookup_info(expected_chip_id); + if (WARN_ON(!expected_chip_data)) + return -ENODEV; + } else { + expected_chip_data = of_device_get_match_data(dev->dev); + expected_chip_id = expected_chip_data->chip_id; + } - /* Check for Device Tree and Chip ID */ - if (dt_chip_data->chip_id != dev->chip_id) { + if (expected_chip_id != dev->chip_id) { dev_err(dev->dev, "Device tree specifies chip %s but found %s, please fix it!\n", - dt_chip_data->dev_name, dev->info->dev_name); + expected_chip_data->dev_name, dev->info->dev_name); return -ENODEV; } @@ -1855,6 +1953,29 @@ static void ksz_get_strings(struct dsa_switch *ds, int port, } } +/** + * ksz_update_port_member - Adjust port forwarding rules based on STP state and + * isolation settings. + * @dev: A pointer to the struct ksz_device representing the device. + * @port: The port number to adjust. + * + * This function dynamically adjusts the port membership configuration for a + * specified port and other device ports, based on Spanning Tree Protocol (STP) + * states and port isolation settings. Each port, including the CPU port, has a + * membership register, represented as a bitfield, where each bit corresponds + * to a port number. A set bit indicates permission to forward frames to that + * port. This function iterates over all ports, updating the membership register + * to reflect current forwarding permissions: + * + * 1. Forwards frames only to ports that are part of the same bridge group and + * in the BR_STATE_FORWARDING state. + * 2. Takes into account the isolation status of ports; ports in the + * BR_STATE_FORWARDING state with BR_ISOLATED configuration will not forward + * frames to each other, even if they are in the same bridge group. + * 3. Ensures that the CPU port is included in the membership based on its + * upstream port configuration, allowing for management and control traffic + * to flow as required. + */ static void ksz_update_port_member(struct ksz_device *dev, int port) { struct ksz_port *p = &dev->ports[port]; @@ -1883,7 +2004,14 @@ static void ksz_update_port_member(struct ksz_device *dev, int port) if (other_p->stp_state != BR_STATE_FORWARDING) continue; - if (p->stp_state == BR_STATE_FORWARDING) { + /* At this point we know that "port" and "other" port [i] are in + * the same bridge group and that "other" port [i] is in + * forwarding stp state. If "port" is also in forwarding stp + * state, we can allow forwarding from port [port] to port [i]. + * Except if both ports are isolated. + */ + if (p->stp_state == BR_STATE_FORWARDING && + !(p->isolated && other_p->isolated)) { val |= BIT(port); port_member |= BIT(i); } @@ -1902,8 +2030,19 @@ static void ksz_update_port_member(struct ksz_device *dev, int port) third_p = &dev->ports[j]; if (third_p->stp_state != BR_STATE_FORWARDING) continue; + third_dp = dsa_to_port(ds, j); - if (dsa_port_bridge_same(other_dp, third_dp)) + + /* Now we updating relation of the "other" port [i] to + * the "third" port [j]. We already know that "other" + * port [i] is in forwarding stp state and that "third" + * port [j] is in forwarding stp state too. + * We need to check if "other" port [i] and "third" port + * [j] are in the same bridge group and not isolated + * before allowing forwarding from port [i] to port [j]. + */ + if (dsa_port_bridge_same(other_dp, third_dp) && + !(other_p->isolated && third_p->isolated)) val |= BIT(j); } @@ -2176,6 +2315,8 @@ static int ksz_pirq_setup(struct ksz_device *dev, u8 p) return ksz_irq_common_setup(dev, pirq); } +static int ksz_parse_drive_strength(struct ksz_device *dev); + static int ksz_setup(struct dsa_switch *ds) { struct ksz_device *dev = ds->priv; @@ -2197,6 +2338,10 @@ static int ksz_setup(struct dsa_switch *ds) return ret; } + ret = ksz_parse_drive_strength(dev); + if (ret) + return ret; + /* set broadcast storm protection 10% rate */ regmap_update_bits(ksz_regmap_16(dev), regs[S_BROADCAST_CTRL], BROADCAST_STORM_RATE, @@ -2215,6 +2360,7 @@ static int ksz_setup(struct dsa_switch *ds) ksz_init_mib_timer(dev); ds->configure_vlan_while_not_filtering = false; + ds->dscp_prio_mapping_is_global = true; if (dev->dev_ops->setup) { ret = dev->dev_ops->setup(ds); @@ -2258,6 +2404,10 @@ static int ksz_setup(struct dsa_switch *ds) goto out_ptp_clock_unregister; } + ret = ksz_dcb_init(dev); + if (ret) + goto out_ptp_clock_unregister; + /* start switch */ regmap_update_bits(ksz_regmap_8(dev), regs[S_START_CTRL], SW_START, SW_START); @@ -2434,14 +2584,15 @@ static u32 ksz_get_phy_flags(struct dsa_switch *ds, int port) return 0; } -static void ksz_mac_link_down(struct dsa_switch *ds, int port, - unsigned int mode, phy_interface_t interface) +static void ksz_phylink_mac_link_down(struct phylink_config *config, + unsigned int mode, + phy_interface_t interface) { - struct ksz_device *dev = ds->priv; - struct ksz_port *p = &dev->ports[port]; + struct dsa_port *dp = dsa_phylink_to_port(config); + struct ksz_device *dev = dp->ds->priv; /* Read all MIB counters when the link is going down. */ - p->read = true; + dev->ports[dp->index].read = true; /* timer started */ if (dev->mib_read_interval) schedule_delayed_work(&dev->mib_read, 0); @@ -2571,9 +2722,33 @@ static int ksz_port_mdb_del(struct dsa_switch *ds, int port, return dev->dev_ops->mdb_del(dev, port, mdb, db); } +static int ksz9477_set_default_prio_queue_mapping(struct ksz_device *dev, + int port) +{ + u32 queue_map = 0; + int ipm; + + for (ipm = 0; ipm < dev->info->num_ipms; ipm++) { + int queue; + + /* Traffic Type (TT) is corresponding to the Internal Priority + * Map (IPM) in the switch. Traffic Class (TC) is + * corresponding to the queue in the switch. + */ + queue = ieee8021q_tt_to_tc(ipm, dev->info->num_tx_queues); + if (queue < 0) + return queue; + + queue_map |= queue << (ipm * KSZ9477_PORT_TC_MAP_S); + } + + return ksz_pwrite32(dev, port, KSZ9477_PORT_MRI_TC_MAP__4, queue_map); +} + static int ksz_port_setup(struct dsa_switch *ds, int port) { struct ksz_device *dev = ds->priv; + int ret; if (!dsa_is_user_port(ds, port)) return 0; @@ -2581,11 +2756,17 @@ static int ksz_port_setup(struct dsa_switch *ds, int port) /* setup user port */ dev->dev_ops->port_setup(dev, port, false); + if (!is_ksz8(dev)) { + ret = ksz9477_set_default_prio_queue_mapping(dev, port); + if (ret) + return ret; + } + /* port_stp_state_set() will be called after to enable the port so * there is no need to do anything. */ - return 0; + return ksz_dcb_init_port(dev, port); } void ksz_port_stp_state_set(struct dsa_switch *ds, int port, u8 state) @@ -2640,6 +2821,7 @@ static void ksz_port_teardown(struct dsa_switch *ds, int port) switch (dev->chip_id) { case KSZ8563_CHIP_ID: + case KSZ8567_CHIP_ID: case KSZ9477_CHIP_ID: case KSZ9563_CHIP_ID: case KSZ9567_CHIP_ID: @@ -2655,7 +2837,7 @@ static int ksz_port_pre_bridge_flags(struct dsa_switch *ds, int port, struct switchdev_brport_flags flags, struct netlink_ext_ack *extack) { - if (flags.mask & ~BR_LEARNING) + if (flags.mask & ~(BR_LEARNING | BR_ISOLATED)) return -EINVAL; return 0; @@ -2668,8 +2850,12 @@ static int ksz_port_bridge_flags(struct dsa_switch *ds, int port, struct ksz_device *dev = ds->priv; struct ksz_port *p = &dev->ports[port]; - if (flags.mask & BR_LEARNING) { - p->learning = !!(flags.val & BR_LEARNING); + if (flags.mask & (BR_LEARNING | BR_ISOLATED)) { + if (flags.mask & BR_LEARNING) + p->learning = !!(flags.val & BR_LEARNING); + + if (flags.mask & BR_ISOLATED) + p->isolated = !!(flags.val & BR_ISOLATED); /* Make the change take effect immediately */ ksz_port_stp_state_set(ds, port, p->stp_state); @@ -2696,14 +2882,15 @@ static enum dsa_tag_protocol ksz_get_tag_protocol(struct dsa_switch *ds, dev->chip_id == KSZ9563_CHIP_ID) proto = DSA_TAG_PROTO_KSZ9893; - if (dev->chip_id == KSZ9477_CHIP_ID || + if (dev->chip_id == KSZ8567_CHIP_ID || + dev->chip_id == KSZ9477_CHIP_ID || dev->chip_id == KSZ9896_CHIP_ID || dev->chip_id == KSZ9897_CHIP_ID || dev->chip_id == KSZ9567_CHIP_ID) proto = DSA_TAG_PROTO_KSZ9477; if (is_lan937x(dev)) - proto = DSA_TAG_PROTO_LAN937X_VALUE; + proto = DSA_TAG_PROTO_LAN937X; return proto; } @@ -2713,10 +2900,18 @@ static int ksz_connect_tag_protocol(struct dsa_switch *ds, { struct ksz_tagger_data *tagger_data; - tagger_data = ksz_tagger_data(ds); - tagger_data->xmit_work_fn = ksz_port_deferred_xmit; - - return 0; + switch (proto) { + case DSA_TAG_PROTO_KSZ8795: + return 0; + case DSA_TAG_PROTO_KSZ9893: + case DSA_TAG_PROTO_KSZ9477: + case DSA_TAG_PROTO_LAN937X: + tagger_data = ksz_tagger_data(ds); + tagger_data->xmit_work_fn = ksz_port_deferred_xmit; + return 0; + default: + return -EPROTONOSUPPORT; + } } static int ksz_port_vlan_filtering(struct dsa_switch *ds, int port, @@ -2796,6 +2991,7 @@ static int ksz_max_mtu(struct dsa_switch *ds, int port) case KSZ8830_CHIP_ID: return KSZ8863_HUGE_PACKET_SIZE - VLAN_ETH_HLEN - ETH_FCS_LEN; case KSZ8563_CHIP_ID: + case KSZ8567_CHIP_ID: case KSZ9477_CHIP_ID: case KSZ9563_CHIP_ID: case KSZ9567_CHIP_ID: @@ -2822,6 +3018,7 @@ static int ksz_validate_eee(struct dsa_switch *ds, int port) switch (dev->chip_id) { case KSZ8563_CHIP_ID: + case KSZ8567_CHIP_ID: case KSZ9477_CHIP_ID: case KSZ9563_CHIP_ID: case KSZ9567_CHIP_ID: @@ -2835,7 +3032,7 @@ static int ksz_validate_eee(struct dsa_switch *ds, int port) } static int ksz_get_mac_eee(struct dsa_switch *ds, int port, - struct ethtool_eee *e) + struct ethtool_keee *e) { int ret; @@ -2855,7 +3052,7 @@ static int ksz_get_mac_eee(struct dsa_switch *ds, int port, } static int ksz_set_mac_eee(struct dsa_switch *ds, int port, - struct ethtool_eee *e) + struct ethtool_keee *e) { struct ksz_device *dev = ds->priv; int ret; @@ -2960,14 +3157,23 @@ phy_interface_t ksz_get_xmii(struct ksz_device *dev, int port, bool gbit) return interface; } -static void ksz_phylink_mac_config(struct dsa_switch *ds, int port, +static void ksz8830_phylink_mac_config(struct phylink_config *config, + unsigned int mode, + const struct phylink_link_state *state) +{ + struct dsa_port *dp = dsa_phylink_to_port(config); + struct ksz_device *dev = dp->ds->priv; + + dev->ports[dp->index].manual_flow = !(state->pause & MLO_PAUSE_AN); +} + +static void ksz_phylink_mac_config(struct phylink_config *config, unsigned int mode, const struct phylink_link_state *state) { - struct ksz_device *dev = ds->priv; - - if (ksz_is_ksz88x3(dev)) - return; + struct dsa_port *dp = dsa_phylink_to_port(config); + struct ksz_device *dev = dp->ds->priv; + int port = dp->index; /* Internal PHYs */ if (dev->info->internal_phy[port]) @@ -2980,9 +3186,6 @@ static void ksz_phylink_mac_config(struct dsa_switch *ds, int port, ksz_set_xmii(dev, port, state->interface); - if (dev->dev_ops->phylink_mac_config) - dev->dev_ops->phylink_mac_config(dev, port, mode, state); - if (dev->dev_ops->setup_rgmii_delay) dev->dev_ops->setup_rgmii_delay(dev, port); } @@ -3080,13 +3283,16 @@ static void ksz_duplex_flowctrl(struct ksz_device *dev, int port, int duplex, ksz_prmw8(dev, port, regs[P_XMII_CTRL_0], mask, val); } -static void ksz9477_phylink_mac_link_up(struct ksz_device *dev, int port, +static void ksz9477_phylink_mac_link_up(struct phylink_config *config, + struct phy_device *phydev, unsigned int mode, phy_interface_t interface, - struct phy_device *phydev, int speed, - int duplex, bool tx_pause, + int speed, int duplex, bool tx_pause, bool rx_pause) { + struct dsa_port *dp = dsa_phylink_to_port(config); + struct ksz_device *dev = dp->ds->priv; + int port = dp->index; struct ksz_port *p; p = &dev->ports[port]; @@ -3102,20 +3308,6 @@ static void ksz9477_phylink_mac_link_up(struct ksz_device *dev, int port, ksz_duplex_flowctrl(dev, port, duplex, tx_pause, rx_pause); } -static void ksz_phylink_mac_link_up(struct dsa_switch *ds, int port, - unsigned int mode, - phy_interface_t interface, - struct phy_device *phydev, int speed, - int duplex, bool tx_pause, bool rx_pause) -{ - struct ksz_device *dev = ds->priv; - - if (dev->dev_ops->phylink_mac_link_up) - dev->dev_ops->phylink_mac_link_up(dev, port, mode, interface, - phydev, speed, duplex, - tx_pause, rx_pause); -} - static int ksz_switch_detect(struct ksz_device *dev) { u8 id1, id2, id4; @@ -3166,6 +3358,7 @@ static int ksz_switch_detect(struct ksz_device *dev) case KSZ9896_CHIP_ID: case KSZ9897_CHIP_ID: case KSZ9567_CHIP_ID: + case KSZ8567_CHIP_ID: case LAN9370_CHIP_ID: case LAN9371_CHIP_ID: case LAN9372_CHIP_ID: @@ -3203,6 +3396,7 @@ static int ksz_cls_flower_add(struct dsa_switch *ds, int port, switch (dev->chip_id) { case KSZ8563_CHIP_ID: + case KSZ8567_CHIP_ID: case KSZ9477_CHIP_ID: case KSZ9563_CHIP_ID: case KSZ9567_CHIP_ID: @@ -3222,6 +3416,7 @@ static int ksz_cls_flower_del(struct dsa_switch *ds, int port, switch (dev->chip_id) { case KSZ8563_CHIP_ID: + case KSZ8567_CHIP_ID: case KSZ9477_CHIP_ID: case KSZ9563_CHIP_ID: case KSZ9567_CHIP_ID: @@ -3414,7 +3609,7 @@ static int ksz_tc_ets_add(struct ksz_device *dev, int port, for (tc_prio = 0; tc_prio < ARRAY_SIZE(p->priomap); tc_prio++) { int queue; - if (tc_prio > KSZ9477_MAX_TC_PRIO) + if (tc_prio >= dev->info->num_ipms) break; queue = ksz_ets_band_to_queue(p, p->priomap[tc_prio]); @@ -3426,8 +3621,7 @@ static int ksz_tc_ets_add(struct ksz_device *dev, int port, static int ksz_tc_ets_del(struct ksz_device *dev, int port) { - int ret, queue, tc_prio, s; - u32 queue_map = 0; + int ret, queue; /* To restore the default chip configuration, set all queues to use the * WRR scheduler with a weight of 1. @@ -3439,31 +3633,10 @@ static int ksz_tc_ets_del(struct ksz_device *dev, int port) return ret; } - switch (dev->info->num_tx_queues) { - case 2: - s = 2; - break; - case 4: - s = 1; - break; - case 8: - s = 0; - break; - default: - return -EINVAL; - } - /* Revert the queue mapping for TC-priority to its default setting on * the chip. */ - for (tc_prio = 0; tc_prio <= KSZ9477_MAX_TC_PRIO; tc_prio++) { - int queue; - - queue = tc_prio >> s; - queue_map |= queue << (tc_prio * KSZ9477_PORT_TC_MAP_S); - } - - return ksz_pwrite32(dev, port, KSZ9477_PORT_MRI_TC_MAP__4, queue_map); + return ksz9477_set_default_prio_queue_mapping(dev, port); } static int ksz_tc_ets_validate(struct ksz_device *dev, int port, @@ -3508,7 +3681,7 @@ static int ksz_tc_setup_qdisc_ets(struct dsa_switch *ds, int port, struct ksz_device *dev = ds->priv; int ret; - if (!dev->info->tc_ets_supported) + if (is_ksz8(dev)) return -EOPNOTSUPP; if (qopt->parent != TC_H_ROOT) { @@ -3773,9 +3946,6 @@ static const struct dsa_switch_ops ksz_switch_ops = { .phy_read = ksz_phy_read16, .phy_write = ksz_phy_write16, .phylink_get_caps = ksz_phylink_get_caps, - .phylink_mac_config = ksz_phylink_mac_config, - .phylink_mac_link_up = ksz_phylink_mac_link_up, - .phylink_mac_link_down = ksz_mac_link_down, .port_setup = ksz_port_setup, .set_ageing_time = ksz_set_ageing_time, .get_strings = ksz_get_strings, @@ -3817,6 +3987,13 @@ static const struct dsa_switch_ops ksz_switch_ops = { .port_setup_tc = ksz_setup_tc, .get_mac_eee = ksz_get_mac_eee, .set_mac_eee = ksz_set_mac_eee, + .port_get_default_prio = ksz_port_get_default_prio, + .port_set_default_prio = ksz_port_set_default_prio, + .port_get_dscp_prio = ksz_port_get_dscp_prio, + .port_add_dscp_prio = ksz_port_add_dscp_prio, + .port_del_dscp_prio = ksz_port_del_dscp_prio, + .port_get_apptrust = ksz_port_get_apptrust, + .port_set_apptrust = ksz_port_set_apptrust, }; struct ksz_device *ksz_switch_alloc(struct device *base, void *priv) @@ -4125,6 +4302,7 @@ static int ksz_parse_drive_strength(struct ksz_device *dev) case KSZ8794_CHIP_ID: case KSZ8765_CHIP_ID: case KSZ8563_CHIP_ID: + case KSZ8567_CHIP_ID: case KSZ9477_CHIP_ID: case KSZ9563_CHIP_ID: case KSZ9567_CHIP_ID: @@ -4155,9 +4333,6 @@ int ksz_switch_register(struct ksz_device *dev) int ret; int i; - if (dev->pdata) - dev->chip_id = dev->pdata->chip_id; - dev->reset_gpio = devm_gpiod_get_optional(dev->dev, "reset", GPIOD_OUT_LOW); if (IS_ERR(dev->reset_gpio)) @@ -4222,16 +4397,15 @@ int ksz_switch_register(struct ksz_device *dev) /* set the real number of ports */ dev->ds->num_ports = dev->info->port_cnt; + /* set the phylink ops */ + dev->ds->phylink_mac_ops = dev->info->phylink_mac_ops; + /* Host port interface will be self detected, or specifically set in * device tree. */ for (port_num = 0; port_num < dev->info->port_cnt; ++port_num) dev->ports[port_num].interface = PHY_INTERFACE_MODE_NA; if (dev->dev->of_node) { - ret = ksz_parse_drive_strength(dev); - if (ret) - return ret; - ret = of_get_phy_mode(dev->dev->of_node, &interface); if (ret == 0) dev->compat_interface = interface; |