diff options
Diffstat (limited to 'drivers/net/dsa/microchip/ksz8795_reg.h')
| -rw-r--r-- | drivers/net/dsa/microchip/ksz8795_reg.h | 71 |
1 files changed, 7 insertions, 64 deletions
diff --git a/drivers/net/dsa/microchip/ksz8795_reg.h b/drivers/net/dsa/microchip/ksz8795_reg.h index c2e52c40a54c..6b40bc25f7ff 100644 --- a/drivers/net/dsa/microchip/ksz8795_reg.h +++ b/drivers/net/dsa/microchip/ksz8795_reg.h @@ -249,7 +249,7 @@ #define REG_PORT_4_LINK_MD_CTRL 0x4A #define PORT_CABLE_10M_SHORT BIT(7) -#define PORT_CABLE_DIAG_RESULT_M 0x3 +#define PORT_CABLE_DIAG_RESULT_M GENMASK(6, 5) #define PORT_CABLE_DIAG_RESULT_S 5 #define PORT_CABLE_STAT_NORMAL 0 #define PORT_CABLE_STAT_OPEN 1 @@ -631,6 +631,10 @@ #define REG_PORT_4_OUT_RATE_3 0xEE #define REG_PORT_5_OUT_RATE_3 0xFE +/* 88x3 specific */ + +#define REG_SW_INSERT_SRC_PVID 0xC2 + /* PME */ #define SW_PME_OUTPUT_ENABLE BIT(1) @@ -744,68 +748,6 @@ #define PORT_ACL_FORCE_DLR_MISS BIT(0) -#ifndef PHY_REG_CTRL -#define PHY_REG_CTRL 0 - -#define PHY_RESET BIT(15) -#define PHY_LOOPBACK BIT(14) -#define PHY_SPEED_100MBIT BIT(13) -#define PHY_AUTO_NEG_ENABLE BIT(12) -#define PHY_POWER_DOWN BIT(11) -#define PHY_MII_DISABLE BIT(10) -#define PHY_AUTO_NEG_RESTART BIT(9) -#define PHY_FULL_DUPLEX BIT(8) -#define PHY_COLLISION_TEST_NOT BIT(7) -#define PHY_HP_MDIX BIT(5) -#define PHY_FORCE_MDIX BIT(4) -#define PHY_AUTO_MDIX_DISABLE BIT(3) -#define PHY_REMOTE_FAULT_DISABLE BIT(2) -#define PHY_TRANSMIT_DISABLE BIT(1) -#define PHY_LED_DISABLE BIT(0) - -#define PHY_REG_STATUS 1 - -#define PHY_100BT4_CAPABLE BIT(15) -#define PHY_100BTX_FD_CAPABLE BIT(14) -#define PHY_100BTX_CAPABLE BIT(13) -#define PHY_10BT_FD_CAPABLE BIT(12) -#define PHY_10BT_CAPABLE BIT(11) -#define PHY_MII_SUPPRESS_CAPABLE_NOT BIT(6) -#define PHY_AUTO_NEG_ACKNOWLEDGE BIT(5) -#define PHY_REMOTE_FAULT BIT(4) -#define PHY_AUTO_NEG_CAPABLE BIT(3) -#define PHY_LINK_STATUS BIT(2) -#define PHY_JABBER_DETECT_NOT BIT(1) -#define PHY_EXTENDED_CAPABILITY BIT(0) - -#define PHY_REG_ID_1 2 -#define PHY_REG_ID_2 3 - -#define PHY_REG_AUTO_NEGOTIATION 4 - -#define PHY_AUTO_NEG_NEXT_PAGE_NOT BIT(15) -#define PHY_AUTO_NEG_REMOTE_FAULT_NOT BIT(13) -#define PHY_AUTO_NEG_SYM_PAUSE BIT(10) -#define PHY_AUTO_NEG_100BT4 BIT(9) -#define PHY_AUTO_NEG_100BTX_FD BIT(8) -#define PHY_AUTO_NEG_100BTX BIT(7) -#define PHY_AUTO_NEG_10BT_FD BIT(6) -#define PHY_AUTO_NEG_10BT BIT(5) -#define PHY_AUTO_NEG_SELECTOR 0x001F -#define PHY_AUTO_NEG_802_3 0x0001 - -#define PHY_REG_REMOTE_CAPABILITY 5 - -#define PHY_REMOTE_NEXT_PAGE_NOT BIT(15) -#define PHY_REMOTE_ACKNOWLEDGE_NOT BIT(14) -#define PHY_REMOTE_REMOTE_FAULT_NOT BIT(13) -#define PHY_REMOTE_SYM_PAUSE BIT(10) -#define PHY_REMOTE_100BTX_FD BIT(8) -#define PHY_REMOTE_100BTX BIT(7) -#define PHY_REMOTE_10BT_FD BIT(6) -#define PHY_REMOTE_10BT BIT(5) -#endif - #define KSZ8795_ID_HI 0x0022 #define KSZ8795_ID_LO 0x1550 #define KSZ8863_ID_LO 0x1430 @@ -815,13 +757,14 @@ #define PHY_REG_LINK_MD 0x1D #define PHY_START_CABLE_DIAG BIT(15) +#define PHY_CABLE_DIAG_RESULT_M GENMASK(14, 13) #define PHY_CABLE_DIAG_RESULT 0x6000 #define PHY_CABLE_STAT_NORMAL 0x0000 #define PHY_CABLE_STAT_OPEN 0x2000 #define PHY_CABLE_STAT_SHORT 0x4000 #define PHY_CABLE_STAT_FAILED 0x6000 #define PHY_CABLE_10M_SHORT BIT(12) -#define PHY_CABLE_FAULT_COUNTER 0x01FF +#define PHY_CABLE_FAULT_COUNTER_M GENMASK(8, 0) #define PHY_REG_PHY_CTRL 0x1F |