diff options
Diffstat (limited to 'drivers/mmc')
| -rw-r--r-- | drivers/mmc/core/mmc.c | 2 | ||||
| -rw-r--r-- | drivers/mmc/core/queue.c | 97 | ||||
| -rw-r--r-- | drivers/mmc/host/mmci_stm32_sdmmc.c | 24 | ||||
| -rw-r--r-- | drivers/mmc/host/sdhci-xenon-phy.c | 48 |
4 files changed, 117 insertions, 54 deletions
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index f410bee50132..58ed7193a3ca 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -1015,10 +1015,12 @@ static int mmc_select_bus_width(struct mmc_card *card) static unsigned ext_csd_bits[] = { EXT_CSD_BUS_WIDTH_8, EXT_CSD_BUS_WIDTH_4, + EXT_CSD_BUS_WIDTH_1, }; static unsigned bus_widths[] = { MMC_BUS_WIDTH_8, MMC_BUS_WIDTH_4, + MMC_BUS_WIDTH_1, }; struct mmc_host *host = card->host; unsigned idx, bus_width = 0; diff --git a/drivers/mmc/core/queue.c b/drivers/mmc/core/queue.c index a0a2412f62a7..2ae60d208cdf 100644 --- a/drivers/mmc/core/queue.c +++ b/drivers/mmc/core/queue.c @@ -174,8 +174,8 @@ static struct scatterlist *mmc_alloc_sg(unsigned short sg_len, gfp_t gfp) return sg; } -static void mmc_queue_setup_discard(struct request_queue *q, - struct mmc_card *card) +static void mmc_queue_setup_discard(struct mmc_card *card, + struct queue_limits *lim) { unsigned max_discard; @@ -183,15 +183,17 @@ static void mmc_queue_setup_discard(struct request_queue *q, if (!max_discard) return; - blk_queue_max_discard_sectors(q, max_discard); - q->limits.discard_granularity = card->pref_erase << 9; - /* granularity must not be greater than max. discard */ - if (card->pref_erase > max_discard) - q->limits.discard_granularity = SECTOR_SIZE; + lim->max_hw_discard_sectors = max_discard; if (mmc_can_secure_erase_trim(card)) - blk_queue_max_secure_erase_sectors(q, max_discard); + lim->max_secure_erase_sectors = max_discard; if (mmc_can_trim(card) && card->erased_byte == 0) - blk_queue_max_write_zeroes_sectors(q, max_discard); + lim->max_write_zeroes_sectors = max_discard; + + /* granularity must not be greater than max. discard */ + if (card->pref_erase > max_discard) + lim->discard_granularity = SECTOR_SIZE; + else + lim->discard_granularity = card->pref_erase << 9; } static unsigned short mmc_get_max_segments(struct mmc_host *host) @@ -341,40 +343,53 @@ static const struct blk_mq_ops mmc_mq_ops = { .timeout = mmc_mq_timed_out, }; -static void mmc_setup_queue(struct mmc_queue *mq, struct mmc_card *card) +static struct gendisk *mmc_alloc_disk(struct mmc_queue *mq, + struct mmc_card *card) { struct mmc_host *host = card->host; - unsigned block_size = 512; + struct queue_limits lim = { }; + struct gendisk *disk; - blk_queue_flag_set(QUEUE_FLAG_NONROT, mq->queue); - blk_queue_flag_clear(QUEUE_FLAG_ADD_RANDOM, mq->queue); if (mmc_can_erase(card)) - mmc_queue_setup_discard(mq->queue, card); + mmc_queue_setup_discard(card, &lim); if (!mmc_dev(host)->dma_mask || !*mmc_dev(host)->dma_mask) - blk_queue_bounce_limit(mq->queue, BLK_BOUNCE_HIGH); - blk_queue_max_hw_sectors(mq->queue, - min(host->max_blk_count, host->max_req_size / 512)); - if (host->can_dma_map_merge) - WARN(!blk_queue_can_use_dma_map_merging(mq->queue, - mmc_dev(host)), - "merging was advertised but not possible"); - blk_queue_max_segments(mq->queue, mmc_get_max_segments(host)); - - if (mmc_card_mmc(card) && card->ext_csd.data_sector_size) { - block_size = card->ext_csd.data_sector_size; - WARN_ON(block_size != 512 && block_size != 4096); - } + lim.bounce = BLK_BOUNCE_HIGH; + + lim.max_hw_sectors = min(host->max_blk_count, host->max_req_size / 512); + + if (mmc_card_mmc(card) && card->ext_csd.data_sector_size) + lim.logical_block_size = card->ext_csd.data_sector_size; + else + lim.logical_block_size = 512; + + WARN_ON_ONCE(lim.logical_block_size != 512 && + lim.logical_block_size != 4096); - blk_queue_logical_block_size(mq->queue, block_size); /* - * After blk_queue_can_use_dma_map_merging() was called with succeed, - * since it calls blk_queue_virt_boundary(), the mmc should not call - * both blk_queue_max_segment_size(). + * Setting a virt_boundary implicity sets a max_segment_size, so try + * to set the hardware one here. */ - if (!host->can_dma_map_merge) - blk_queue_max_segment_size(mq->queue, - round_down(host->max_seg_size, block_size)); + if (host->can_dma_map_merge) { + lim.virt_boundary_mask = dma_get_merge_boundary(mmc_dev(host)); + lim.max_segments = MMC_DMA_MAP_MERGE_SEGMENTS; + } else { + lim.max_segment_size = + round_down(host->max_seg_size, lim.logical_block_size); + lim.max_segments = host->max_segs; + } + + disk = blk_mq_alloc_disk(&mq->tag_set, &lim, mq); + if (IS_ERR(disk)) + return disk; + mq->queue = disk->queue; + + if (mmc_host_is_spi(host) && host->use_spi_crc) + blk_queue_flag_set(QUEUE_FLAG_STABLE_WRITES, mq->queue); + blk_queue_rq_timeout(mq->queue, 60 * HZ); + + blk_queue_flag_set(QUEUE_FLAG_NONROT, mq->queue); + blk_queue_flag_clear(QUEUE_FLAG_ADD_RANDOM, mq->queue); dma_set_max_seg_size(mmc_dev(host), queue_max_segment_size(mq->queue)); @@ -386,6 +401,7 @@ static void mmc_setup_queue(struct mmc_queue *mq, struct mmc_card *card) init_waitqueue_head(&mq->wait); mmc_crypto_setup_queue(mq->queue, host); + return disk; } static inline bool mmc_merge_capable(struct mmc_host *host) @@ -447,18 +463,9 @@ struct gendisk *mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card) return ERR_PTR(ret); - disk = blk_mq_alloc_disk(&mq->tag_set, mq); - if (IS_ERR(disk)) { + disk = mmc_alloc_disk(mq, card); + if (IS_ERR(disk)) blk_mq_free_tag_set(&mq->tag_set); - return disk; - } - mq->queue = disk->queue; - - if (mmc_host_is_spi(host) && host->use_spi_crc) - blk_queue_flag_set(QUEUE_FLAG_STABLE_WRITES, mq->queue); - blk_queue_rq_timeout(mq->queue, 60 * HZ); - - mmc_setup_queue(mq, card); return disk; } diff --git a/drivers/mmc/host/mmci_stm32_sdmmc.c b/drivers/mmc/host/mmci_stm32_sdmmc.c index 35067e1e6cd8..f5da7f9baa52 100644 --- a/drivers/mmc/host/mmci_stm32_sdmmc.c +++ b/drivers/mmc/host/mmci_stm32_sdmmc.c @@ -225,6 +225,8 @@ static int sdmmc_idma_start(struct mmci_host *host, unsigned int *datactrl) struct scatterlist *sg; int i; + host->dma_in_progress = true; + if (!host->variant->dma_lli || data->sg_len == 1 || idma->use_bounce_buffer) { u32 dma_addr; @@ -263,9 +265,30 @@ static int sdmmc_idma_start(struct mmci_host *host, unsigned int *datactrl) return 0; } +static void sdmmc_idma_error(struct mmci_host *host) +{ + struct mmc_data *data = host->data; + struct sdmmc_idma *idma = host->dma_priv; + + if (!dma_inprogress(host)) + return; + + writel_relaxed(0, host->base + MMCI_STM32_IDMACTRLR); + host->dma_in_progress = false; + data->host_cookie = 0; + + if (!idma->use_bounce_buffer) + dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len, + mmc_get_dma_dir(data)); +} + static void sdmmc_idma_finalize(struct mmci_host *host, struct mmc_data *data) { + if (!dma_inprogress(host)) + return; + writel_relaxed(0, host->base + MMCI_STM32_IDMACTRLR); + host->dma_in_progress = false; if (!data->host_cookie) sdmmc_idma_unprep_data(host, data, 0); @@ -676,6 +699,7 @@ static struct mmci_host_ops sdmmc_variant_ops = { .dma_setup = sdmmc_idma_setup, .dma_start = sdmmc_idma_start, .dma_finalize = sdmmc_idma_finalize, + .dma_error = sdmmc_idma_error, .set_clkreg = mmci_sdmmc_set_clkreg, .set_pwrreg = mmci_sdmmc_set_pwrreg, .busy_complete = sdmmc_busy_complete, diff --git a/drivers/mmc/host/sdhci-xenon-phy.c b/drivers/mmc/host/sdhci-xenon-phy.c index 8cf3a375de65..cc9d28b75eb9 100644 --- a/drivers/mmc/host/sdhci-xenon-phy.c +++ b/drivers/mmc/host/sdhci-xenon-phy.c @@ -11,6 +11,7 @@ #include <linux/slab.h> #include <linux/delay.h> #include <linux/ktime.h> +#include <linux/iopoll.h> #include <linux/of_address.h> #include "sdhci-pltfm.h" @@ -109,6 +110,8 @@ #define XENON_EMMC_PHY_LOGIC_TIMING_ADJUST (XENON_EMMC_PHY_REG_BASE + 0x18) #define XENON_LOGIC_TIMING_VALUE 0x00AA8977 +#define XENON_MAX_PHY_TIMEOUT_LOOPS 100 + /* * List offset of PHY registers and some special register values * in eMMC PHY 5.0 or eMMC PHY 5.1 @@ -216,6 +219,19 @@ static int xenon_alloc_emmc_phy(struct sdhci_host *host) return 0; } +static int xenon_check_stability_internal_clk(struct sdhci_host *host) +{ + u32 reg; + int err; + + err = read_poll_timeout(sdhci_readw, reg, reg & SDHCI_CLOCK_INT_STABLE, + 1100, 20000, false, host, SDHCI_CLOCK_CONTROL); + if (err) + dev_err(mmc_dev(host->mmc), "phy_init: Internal clock never stabilized.\n"); + + return err; +} + /* * eMMC 5.0/5.1 PHY init/re-init. * eMMC PHY init should be executed after: @@ -232,6 +248,11 @@ static int xenon_emmc_phy_init(struct sdhci_host *host) struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host); struct xenon_emmc_phy_regs *phy_regs = priv->emmc_phy_regs; + int ret = xenon_check_stability_internal_clk(host); + + if (ret) + return ret; + reg = sdhci_readl(host, phy_regs->timing_adj); reg |= XENON_PHY_INITIALIZAION; sdhci_writel(host, reg, phy_regs->timing_adj); @@ -259,18 +280,27 @@ static int xenon_emmc_phy_init(struct sdhci_host *host) /* get the wait time */ wait /= clock; wait++; - /* wait for host eMMC PHY init completes */ - udelay(wait); - reg = sdhci_readl(host, phy_regs->timing_adj); - reg &= XENON_PHY_INITIALIZAION; - if (reg) { + /* + * AC5X spec says bit must be polled until zero. + * We see cases in which timeout can take longer + * than the standard calculation on AC5X, which is + * expected following the spec comment above. + * According to the spec, we must wait as long as + * it takes for that bit to toggle on AC5X. + * Cap that with 100 delay loops so we won't get + * stuck here forever: + */ + + ret = read_poll_timeout(sdhci_readl, reg, + !(reg & XENON_PHY_INITIALIZAION), + wait, XENON_MAX_PHY_TIMEOUT_LOOPS * wait, + false, host, phy_regs->timing_adj); + if (ret) dev_err(mmc_dev(host->mmc), "eMMC PHY init cannot complete after %d us\n", - wait); - return -ETIMEDOUT; - } + wait * XENON_MAX_PHY_TIMEOUT_LOOPS); - return 0; + return ret; } #define ARMADA_3700_SOC_PAD_1_8V 0x1 |