diff options
Diffstat (limited to 'drivers/mmc/host')
| -rw-r--r-- | drivers/mmc/host/meson-mx-sdhc-mmc.c | 26 | ||||
| -rw-r--r-- | drivers/mmc/host/mmc_spi.c | 2 | ||||
| -rw-r--r-- | drivers/mmc/host/sdhci-sprd.c | 10 |
3 files changed, 13 insertions, 25 deletions
diff --git a/drivers/mmc/host/meson-mx-sdhc-mmc.c b/drivers/mmc/host/meson-mx-sdhc-mmc.c index 528ec8166e7c..1ed9731e77ef 100644 --- a/drivers/mmc/host/meson-mx-sdhc-mmc.c +++ b/drivers/mmc/host/meson-mx-sdhc-mmc.c @@ -269,7 +269,7 @@ static int meson_mx_sdhc_enable_clks(struct mmc_host *mmc) static int meson_mx_sdhc_set_clk(struct mmc_host *mmc, struct mmc_ios *ios) { struct meson_mx_sdhc_host *host = mmc_priv(mmc); - u32 rx_clk_phase; + u32 val, rx_clk_phase; int ret; meson_mx_sdhc_disable_clks(mmc); @@ -290,27 +290,11 @@ static int meson_mx_sdhc_set_clk(struct mmc_host *mmc, struct mmc_ios *ios) mmc->actual_clock = clk_get_rate(host->sd_clk); /* - * according to Amlogic the following latching points are - * selected with empirical values, there is no (known) formula - * to calculate these. + * Phase 90 should work in most cases. For data transmission, + * meson_mx_sdhc_execute_tuning() will find a accurate value */ - if (mmc->actual_clock > 100000000) { - rx_clk_phase = 1; - } else if (mmc->actual_clock > 45000000) { - if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330) - rx_clk_phase = 15; - else - rx_clk_phase = 11; - } else if (mmc->actual_clock >= 25000000) { - rx_clk_phase = 15; - } else if (mmc->actual_clock > 5000000) { - rx_clk_phase = 23; - } else if (mmc->actual_clock > 1000000) { - rx_clk_phase = 55; - } else { - rx_clk_phase = 1061; - } - + regmap_read(host->regmap, MESON_SDHC_CLKC, &val); + rx_clk_phase = FIELD_GET(MESON_SDHC_CLKC_CLK_DIV, val) / 4; regmap_update_bits(host->regmap, MESON_SDHC_CLK2, MESON_SDHC_CLK2_RX_CLK_PHASE, FIELD_PREP(MESON_SDHC_CLK2_RX_CLK_PHASE, diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c index cc333ad67cac..b0cccef4cfbf 100644 --- a/drivers/mmc/host/mmc_spi.c +++ b/drivers/mmc/host/mmc_spi.c @@ -1322,7 +1322,7 @@ static int mmc_spi_probe(struct spi_device *spi) /* We rely on full duplex transfers, mostly to reduce * per-transfer overheads (by making fewer transfers). */ - if (spi->master->flags & SPI_MASTER_HALF_DUPLEX) + if (spi->master->flags & SPI_CONTROLLER_HALF_DUPLEX) return -EINVAL; /* MMC and SD specs only seem to care that sampling is on the diff --git a/drivers/mmc/host/sdhci-sprd.c b/drivers/mmc/host/sdhci-sprd.c index 6b8a57e2d20f..bed57a1c64b5 100644 --- a/drivers/mmc/host/sdhci-sprd.c +++ b/drivers/mmc/host/sdhci-sprd.c @@ -239,15 +239,19 @@ static inline void _sdhci_sprd_set_clock(struct sdhci_host *host, div = ((div & 0x300) >> 2) | ((div & 0xFF) << 8); sdhci_enable_clk(host, div); + val = sdhci_readl(host, SDHCI_SPRD_REG_32_BUSY_POSI); + mask = SDHCI_SPRD_BIT_OUTR_CLK_AUTO_EN | SDHCI_SPRD_BIT_INNR_CLK_AUTO_EN; /* Enable CLK_AUTO when the clock is greater than 400K. */ if (clk > 400000) { - val = sdhci_readl(host, SDHCI_SPRD_REG_32_BUSY_POSI); - mask = SDHCI_SPRD_BIT_OUTR_CLK_AUTO_EN | - SDHCI_SPRD_BIT_INNR_CLK_AUTO_EN; if (mask != (val & mask)) { val |= mask; sdhci_writel(host, val, SDHCI_SPRD_REG_32_BUSY_POSI); } + } else { + if (val & mask) { + val &= ~mask; + sdhci_writel(host, val, SDHCI_SPRD_REG_32_BUSY_POSI); + } } } |