diff options
Diffstat (limited to 'drivers/mmc/core')
| -rw-r--r-- | drivers/mmc/core/bus.c | 8 | ||||
| -rw-r--r-- | drivers/mmc/core/core.c | 118 | ||||
| -rw-r--r-- | drivers/mmc/core/debugfs.c | 67 | ||||
| -rw-r--r-- | drivers/mmc/core/mmc.c | 2 | ||||
| -rw-r--r-- | drivers/mmc/core/sd.c | 21 | ||||
| -rw-r--r-- | drivers/mmc/core/sdio_cis.c | 8 | ||||
| -rw-r--r-- | drivers/mmc/core/sdio_ops.c | 8 |
7 files changed, 222 insertions, 10 deletions
diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c index f210a8ee6861..bdb165f93046 100644 --- a/drivers/mmc/core/bus.c +++ b/drivers/mmc/core/bus.c @@ -84,6 +84,14 @@ mmc_bus_uevent(struct device *dev, struct kobj_uevent_env *env) } retval = add_uevent_var(env, "MMC_NAME=%s", mmc_card_name(card)); + if (retval) + return retval; + + /* + * Request the mmc_block device. Note: that this is a direct request + * for the module it carries no information as to what is inserted. + */ + retval = add_uevent_var(env, "MODALIAS=mmc:block"); return retval; } diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index df6ce4a06cf3..fa073ab3fa34 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -21,6 +21,7 @@ #include <linux/leds.h> #include <linux/scatterlist.h> #include <linux/log2.h> +#include <linux/regulator/consumer.h> #include <linux/mmc/card.h> #include <linux/mmc/host.h> @@ -297,6 +298,21 @@ void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card) data->timeout_clks = 0; } } + /* + * Some cards need very high timeouts if driven in SPI mode. + * The worst observed timeout was 900ms after writing a + * continuous stream of data until the internal logic + * overflowed. + */ + if (mmc_host_is_spi(card->host)) { + if (data->flags & MMC_DATA_WRITE) { + if (data->timeout_ns < 1000000000) + data->timeout_ns = 1000000000; /* 1s */ + } else { + if (data->timeout_ns < 100000000) + data->timeout_ns = 100000000; /* 100ms */ + } + } } EXPORT_SYMBOL(mmc_set_data_timeout); @@ -523,6 +539,105 @@ u32 mmc_vddrange_to_ocrmask(int vdd_min, int vdd_max) } EXPORT_SYMBOL(mmc_vddrange_to_ocrmask); +#ifdef CONFIG_REGULATOR + +/** + * mmc_regulator_get_ocrmask - return mask of supported voltages + * @supply: regulator to use + * + * This returns either a negative errno, or a mask of voltages that + * can be provided to MMC/SD/SDIO devices using the specified voltage + * regulator. This would normally be called before registering the + * MMC host adapter. + */ +int mmc_regulator_get_ocrmask(struct regulator *supply) +{ + int result = 0; + int count; + int i; + + count = regulator_count_voltages(supply); + if (count < 0) + return count; + + for (i = 0; i < count; i++) { + int vdd_uV; + int vdd_mV; + + vdd_uV = regulator_list_voltage(supply, i); + if (vdd_uV <= 0) + continue; + + vdd_mV = vdd_uV / 1000; + result |= mmc_vddrange_to_ocrmask(vdd_mV, vdd_mV); + } + + return result; +} +EXPORT_SYMBOL(mmc_regulator_get_ocrmask); + +/** + * mmc_regulator_set_ocr - set regulator to match host->ios voltage + * @vdd_bit: zero for power off, else a bit number (host->ios.vdd) + * @supply: regulator to use + * + * Returns zero on success, else negative errno. + * + * MMC host drivers may use this to enable or disable a regulator using + * a particular supply voltage. This would normally be called from the + * set_ios() method. + */ +int mmc_regulator_set_ocr(struct regulator *supply, unsigned short vdd_bit) +{ + int result = 0; + int min_uV, max_uV; + int enabled; + + enabled = regulator_is_enabled(supply); + if (enabled < 0) + return enabled; + + if (vdd_bit) { + int tmp; + int voltage; + + /* REVISIT mmc_vddrange_to_ocrmask() may have set some + * bits this regulator doesn't quite support ... don't + * be too picky, most cards and regulators are OK with + * a 0.1V range goof (it's a small error percentage). + */ + tmp = vdd_bit - ilog2(MMC_VDD_165_195); + if (tmp == 0) { + min_uV = 1650 * 1000; + max_uV = 1950 * 1000; + } else { + min_uV = 1900 * 1000 + tmp * 100 * 1000; + max_uV = min_uV + 100 * 1000; + } + + /* avoid needless changes to this voltage; the regulator + * might not allow this operation + */ + voltage = regulator_get_voltage(supply); + if (voltage < 0) + result = voltage; + else if (voltage < min_uV || voltage > max_uV) + result = regulator_set_voltage(supply, min_uV, max_uV); + else + result = 0; + + if (result == 0 && !enabled) + result = regulator_enable(supply); + } else if (enabled) { + result = regulator_disable(supply); + } + + return result; +} +EXPORT_SYMBOL(mmc_regulator_set_ocr); + +#endif + /* * Mask off any voltages we don't support and select * the lowest voltage @@ -815,6 +930,7 @@ void mmc_stop_host(struct mmc_host *host) spin_unlock_irqrestore(&host->lock, flags); #endif + cancel_delayed_work(&host->detect); mmc_flush_scheduled_work(); mmc_bus_get(host); @@ -842,6 +958,7 @@ void mmc_stop_host(struct mmc_host *host) */ int mmc_suspend_host(struct mmc_host *host, pm_message_t state) { + cancel_delayed_work(&host->detect); mmc_flush_scheduled_work(); mmc_bus_get(host); @@ -875,6 +992,7 @@ int mmc_resume_host(struct mmc_host *host) mmc_bus_get(host); if (host->bus_ops && !host->bus_dead) { mmc_power_up(host); + mmc_select_voltage(host, host->ocr); BUG_ON(!host->bus_ops->resume); host->bus_ops->resume(host); } diff --git a/drivers/mmc/core/debugfs.c b/drivers/mmc/core/debugfs.c index 1237bb4c722b..610dbd1fcc82 100644 --- a/drivers/mmc/core/debugfs.c +++ b/drivers/mmc/core/debugfs.c @@ -184,6 +184,68 @@ static int mmc_dbg_card_status_get(void *data, u64 *val) DEFINE_SIMPLE_ATTRIBUTE(mmc_dbg_card_status_fops, mmc_dbg_card_status_get, NULL, "%08llx\n"); +#define EXT_CSD_STR_LEN 1025 + +static int mmc_ext_csd_open(struct inode *inode, struct file *filp) +{ + struct mmc_card *card = inode->i_private; + char *buf; + ssize_t n = 0; + u8 *ext_csd; + int err, i; + + buf = kmalloc(EXT_CSD_STR_LEN + 1, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + ext_csd = kmalloc(512, GFP_KERNEL); + if (!ext_csd) { + err = -ENOMEM; + goto out_free; + } + + mmc_claim_host(card->host); + err = mmc_send_ext_csd(card, ext_csd); + mmc_release_host(card->host); + if (err) + goto out_free; + + for (i = 511; i >= 0; i--) + n += sprintf(buf + n, "%02x", ext_csd[i]); + n += sprintf(buf + n, "\n"); + BUG_ON(n != EXT_CSD_STR_LEN); + + filp->private_data = buf; + kfree(ext_csd); + return 0; + +out_free: + kfree(buf); + kfree(ext_csd); + return err; +} + +static ssize_t mmc_ext_csd_read(struct file *filp, char __user *ubuf, + size_t cnt, loff_t *ppos) +{ + char *buf = filp->private_data; + + return simple_read_from_buffer(ubuf, cnt, ppos, + buf, EXT_CSD_STR_LEN); +} + +static int mmc_ext_csd_release(struct inode *inode, struct file *file) +{ + kfree(file->private_data); + return 0; +} + +static struct file_operations mmc_dbg_ext_csd_fops = { + .open = mmc_ext_csd_open, + .read = mmc_ext_csd_read, + .release = mmc_ext_csd_release, +}; + void mmc_add_card_debugfs(struct mmc_card *card) { struct mmc_host *host = card->host; @@ -211,6 +273,11 @@ void mmc_add_card_debugfs(struct mmc_card *card) &mmc_dbg_card_status_fops)) goto err; + if (mmc_card_mmc(card)) + if (!debugfs_create_file("ext_csd", S_IRUSR, root, card, + &mmc_dbg_ext_csd_fops)) + goto err; + return; err: diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index c232d11a7ed4..06084dbf1277 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -208,7 +208,7 @@ static int mmc_read_ext_csd(struct mmc_card *card) } ext_csd_struct = ext_csd[EXT_CSD_REV]; - if (ext_csd_struct > 2) { + if (ext_csd_struct > 3) { printk(KERN_ERR "%s: unrecognised EXT_CSD structure " "version %d\n", mmc_hostname(card->host), ext_csd_struct); diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c index 26fc098d77cd..cd81c395e164 100644 --- a/drivers/mmc/core/sd.c +++ b/drivers/mmc/core/sd.c @@ -363,15 +363,6 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr, goto err; /* - * For SPI, enable CRC as appropriate. - */ - if (mmc_host_is_spi(host)) { - err = mmc_spi_set_crc(host, use_spi_crc); - if (err) - goto err; - } - - /* * Fetch CID from card. */ if (mmc_host_is_spi(host)) @@ -458,6 +449,18 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr, } /* + * For SPI, enable CRC as appropriate. + * This CRC enable is located AFTER the reading of the + * card registers because some SDHC cards are not able + * to provide valid CRCs for non-512-byte blocks. + */ + if (mmc_host_is_spi(host)) { + err = mmc_spi_set_crc(host, use_spi_crc); + if (err) + goto free_card; + } + + /* * Attempt to change to high-speed (if supported) */ err = mmc_switch_hs(card); diff --git a/drivers/mmc/core/sdio_cis.c b/drivers/mmc/core/sdio_cis.c index 956bd7677502..963f2937c5e3 100644 --- a/drivers/mmc/core/sdio_cis.c +++ b/drivers/mmc/core/sdio_cis.c @@ -223,10 +223,18 @@ static int sdio_read_cis(struct mmc_card *card, struct sdio_func *func) if (tpl_code == 0xff) break; + /* null entries have no link field or data */ + if (tpl_code == 0x00) + continue; + ret = mmc_io_rw_direct(card, 0, 0, ptr++, 0, &tpl_link); if (ret) break; + /* a size of 0xff also means we're done */ + if (tpl_link == 0xff) + break; + this = kmalloc(sizeof(*this) + tpl_link, GFP_KERNEL); if (!this) return -ENOMEM; diff --git a/drivers/mmc/core/sdio_ops.c b/drivers/mmc/core/sdio_ops.c index c8fa095a4488..4eb7825fd1a7 100644 --- a/drivers/mmc/core/sdio_ops.c +++ b/drivers/mmc/core/sdio_ops.c @@ -76,6 +76,10 @@ int mmc_io_rw_direct(struct mmc_card *card, int write, unsigned fn, BUG_ON(!card); BUG_ON(fn > 7); + /* sanity check */ + if (addr & ~0x1FFFF) + return -EINVAL; + memset(&cmd, 0, sizeof(struct mmc_command)); cmd.opcode = SD_IO_RW_DIRECT; @@ -125,6 +129,10 @@ int mmc_io_rw_extended(struct mmc_card *card, int write, unsigned fn, WARN_ON(blocks == 0); WARN_ON(blksz == 0); + /* sanity check */ + if (addr & ~0x1FFFF) + return -EINVAL; + memset(&mrq, 0, sizeof(struct mmc_request)); memset(&cmd, 0, sizeof(struct mmc_command)); memset(&data, 0, sizeof(struct mmc_data)); |