diff options
Diffstat (limited to 'drivers/media/platform/microchip')
6 files changed, 239 insertions, 237 deletions
diff --git a/drivers/media/platform/microchip/Kconfig b/drivers/media/platform/microchip/Kconfig index 4f30807aae43..4734ecced029 100644 --- a/drivers/media/platform/microchip/Kconfig +++ b/drivers/media/platform/microchip/Kconfig @@ -23,7 +23,7 @@ config VIDEO_MICROCHIP_ISC config VIDEO_MICROCHIP_XISC tristate "Microchip eXtended Image Sensor Controller (XISC) support" depends on V4L_PLATFORM_DRIVERS - depends on VIDEO_DEV && COMMON_CLK && VIDEO_V4L2_SUBDEV_API + depends on VIDEO_DEV && COMMON_CLK depends on ARCH_AT91 || COMPILE_TEST select VIDEOBUF2_DMA_CONTIG select REGMAP_MMIO diff --git a/drivers/media/platform/microchip/microchip-isc-base.c b/drivers/media/platform/microchip/microchip-isc-base.c index 9034d8f97831..28749a09b0c3 100644 --- a/drivers/media/platform/microchip/microchip-isc-base.c +++ b/drivers/media/platform/microchip/microchip-isc-base.c @@ -36,11 +36,6 @@ static unsigned int debug; module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "debug level (0-2)"); -static unsigned int sensor_preferred = 1; -module_param(sensor_preferred, uint, 0644); -MODULE_PARM_DESC(sensor_preferred, - "Sensor is preferred to output the specified format (1-on 0-off), default 1"); - #define ISC_IS_FORMAT_RAW(mbus_code) \ (((mbus_code) & 0xf000) == 0x3000) @@ -341,6 +336,10 @@ static int isc_start_streaming(struct vb2_queue *vq, unsigned int count) unsigned long flags; int ret; + ret = media_pipeline_start(isc->video_dev.entity.pads, &isc->mpipe); + if (ret) + goto err_pipeline_start; + /* Enable stream on the sub device */ ret = v4l2_subdev_call(isc->current_subdev->sd, video, s_stream, 1); if (ret && ret != -ENOIOCTLCMD) { @@ -390,6 +389,9 @@ err_pm_get: v4l2_subdev_call(isc->current_subdev->sd, video, s_stream, 0); err_start_stream: + media_pipeline_stop(isc->video_dev.entity.pads); + +err_pipeline_start: spin_lock_irqsave(&isc->dma_queue_lock, flags); list_for_each_entry(buf, &isc->dma_queue, list) vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_QUEUED); @@ -428,6 +430,9 @@ static void isc_stop_streaming(struct vb2_queue *vq) if (ret && ret != -ENOIOCTLCMD) v4l2_err(&isc->v4l2_dev, "stream off failed in subdev\n"); + /* Stop media pipeline */ + media_pipeline_stop(isc->video_dev.entity.pads); + /* Release all active buffers */ spin_lock_irqsave(&isc->dma_queue_lock, flags); if (unlikely(isc->cur_frm)) { @@ -459,22 +464,6 @@ static void isc_buffer_queue(struct vb2_buffer *vb) spin_unlock_irqrestore(&isc->dma_queue_lock, flags); } -static struct isc_format *find_format_by_fourcc(struct isc_device *isc, - unsigned int fourcc) -{ - unsigned int num_formats = isc->num_user_formats; - struct isc_format *fmt; - unsigned int i; - - for (i = 0; i < num_formats; i++) { - fmt = isc->user_formats[i]; - if (fmt->fourcc == fourcc) - return fmt; - } - - return NULL; -} - static const struct vb2_ops isc_vb2_ops = { .queue_setup = isc_queue_setup, .wait_prepare = vb2_ops_wait_prepare, @@ -503,23 +492,57 @@ static int isc_enum_fmt_vid_cap(struct file *file, void *priv, { struct isc_device *isc = video_drvdata(file); u32 index = f->index; - u32 i, supported_index; + u32 i, supported_index = 0; + struct isc_format *fmt; + + /* + * If we are not asked a specific mbus_code, we have to report all + * the formats that we can output. + */ + if (!f->mbus_code) { + if (index >= isc->controller_formats_size) + return -EINVAL; - if (index < isc->controller_formats_size) { f->pixelformat = isc->controller_formats[index].fourcc; + + return 0; + } + + /* + * If a specific mbus_code is requested, check if we support + * this mbus_code as input for the ISC. + * If it's supported, then we report the corresponding pixelformat + * as first possible option for the ISC. + * E.g. mbus MEDIA_BUS_FMT_YUYV8_2X8 and report + * 'YUYV' (YUYV 4:2:2) + */ + fmt = isc_find_format_by_code(isc, f->mbus_code, &i); + if (!fmt) + return -EINVAL; + + if (!index) { + f->pixelformat = fmt->fourcc; + return 0; } - index -= isc->controller_formats_size; + supported_index++; - supported_index = 0; + /* If the index is not raw, we don't have anymore formats to report */ + if (!ISC_IS_FORMAT_RAW(f->mbus_code)) + return -EINVAL; - for (i = 0; i < isc->formats_list_size; i++) { - if (!ISC_IS_FORMAT_RAW(isc->formats_list[i].mbus_code) || - !isc->formats_list[i].sd_support) + /* + * We are asked for a specific mbus code, which is raw. + * We have to search through the formats we can convert to. + * We have to skip the raw formats, we cannot convert to raw. + * E.g. 'AR12' (16-bit ARGB 4-4-4-4), 'AR15' (16-bit ARGB 1-5-5-5), etc. + */ + for (i = 0; i < isc->controller_formats_size; i++) { + if (isc->controller_formats[i].raw) continue; - if (supported_index == index) { - f->pixelformat = isc->formats_list[i].fourcc; + if (index == supported_index) { + f->pixelformat = isc->controller_formats[i].fourcc; return 0; } supported_index++; @@ -590,20 +613,30 @@ static int isc_try_validate_formats(struct isc_device *isc) break; default: /* any other different formats are not supported */ + v4l2_err(&isc->v4l2_dev, "Requested unsupported format.\n"); ret = -EINVAL; } v4l2_dbg(1, debug, &isc->v4l2_dev, "Format validation, requested rgb=%u, yuv=%u, grey=%u, bayer=%u\n", rgb, yuv, grey, bayer); - /* we cannot output RAW if we do not receive RAW */ - if ((bayer) && !ISC_IS_FORMAT_RAW(isc->try_config.sd_format->mbus_code)) + if (bayer && + !ISC_IS_FORMAT_RAW(isc->try_config.sd_format->mbus_code)) { + v4l2_err(&isc->v4l2_dev, "Cannot output RAW if we do not receive RAW.\n"); return -EINVAL; + } - /* we cannot output GREY if we do not receive RAW/GREY */ if (grey && !ISC_IS_FORMAT_RAW(isc->try_config.sd_format->mbus_code) && - !ISC_IS_FORMAT_GREY(isc->try_config.sd_format->mbus_code)) + !ISC_IS_FORMAT_GREY(isc->try_config.sd_format->mbus_code)) { + v4l2_err(&isc->v4l2_dev, "Cannot output GREY if we do not receive RAW/GREY.\n"); return -EINVAL; + } + + if ((rgb || bayer || yuv) && + ISC_IS_FORMAT_GREY(isc->try_config.sd_format->mbus_code)) { + v4l2_err(&isc->v4l2_dev, "Cannot convert GREY to another format.\n"); + return -EINVAL; + } return ret; } @@ -831,7 +864,7 @@ static void isc_try_fse(struct isc_device *isc, * If we do not know yet which format the subdev is using, we cannot * do anything. */ - if (!isc->try_config.sd_format) + if (!isc->config.sd_format) return; fse.code = isc->try_config.sd_format->mbus_code; @@ -852,180 +885,139 @@ static void isc_try_fse(struct isc_device *isc, } } -static int isc_try_fmt(struct isc_device *isc, struct v4l2_format *f, - u32 *code) +static int isc_try_fmt(struct isc_device *isc, struct v4l2_format *f) { - int i; - struct isc_format *sd_fmt = NULL, *direct_fmt = NULL; struct v4l2_pix_format *pixfmt = &f->fmt.pix; - struct v4l2_subdev_pad_config pad_cfg = {}; - struct v4l2_subdev_state pad_state = { - .pads = &pad_cfg - }; - struct v4l2_subdev_format format = { - .which = V4L2_SUBDEV_FORMAT_TRY, - }; - u32 mbus_code; - int ret; - bool rlp_dma_direct_dump = false; + unsigned int i; if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) return -EINVAL; - /* Step 1: find a RAW format that is supported */ - for (i = 0; i < isc->num_user_formats; i++) { - if (ISC_IS_FORMAT_RAW(isc->user_formats[i]->mbus_code)) { - sd_fmt = isc->user_formats[i]; + isc->try_config.fourcc = isc->controller_formats[0].fourcc; + + /* find if the format requested is supported */ + for (i = 0; i < isc->controller_formats_size; i++) + if (isc->controller_formats[i].fourcc == pixfmt->pixelformat) { + isc->try_config.fourcc = pixfmt->pixelformat; break; } - } - /* Step 2: We can continue with this RAW format, or we can look - * for better: maybe sensor supports directly what we need. - */ - direct_fmt = find_format_by_fourcc(isc, pixfmt->pixelformat); - - /* Step 3: We have both. We decide given the module parameter which - * one to use. - */ - if (direct_fmt && sd_fmt && sensor_preferred) - sd_fmt = direct_fmt; - - /* Step 4: we do not have RAW but we have a direct format. Use it. */ - if (direct_fmt && !sd_fmt) - sd_fmt = direct_fmt; - - /* Step 5: if we are using a direct format, we need to package - * everything as 8 bit data and just dump it - */ - if (sd_fmt == direct_fmt) - rlp_dma_direct_dump = true; - - /* Step 6: We have no format. This can happen if the userspace - * requests some weird/invalid format. - * In this case, default to whatever we have - */ - if (!sd_fmt && !direct_fmt) { - sd_fmt = isc->user_formats[isc->num_user_formats - 1]; - v4l2_dbg(1, debug, &isc->v4l2_dev, - "Sensor not supporting %.4s, using %.4s\n", - (char *)&pixfmt->pixelformat, (char *)&sd_fmt->fourcc); - } - - if (!sd_fmt) { - ret = -EINVAL; - goto isc_try_fmt_err; - } - - /* Step 7: Print out what we decided for debugging */ - v4l2_dbg(1, debug, &isc->v4l2_dev, - "Preferring to have sensor using format %.4s\n", - (char *)&sd_fmt->fourcc); - - /* Step 8: at this moment we decided which format the subdev will use */ - isc->try_config.sd_format = sd_fmt; - - /* Limit to Microchip ISC hardware capabilities */ - if (pixfmt->width > isc->max_width) - pixfmt->width = isc->max_width; - if (pixfmt->height > isc->max_height) - pixfmt->height = isc->max_height; - - /* - * The mbus format is the one the subdev outputs. - * The pixels will be transferred in this format Sensor -> ISC - */ - mbus_code = sd_fmt->mbus_code; - - /* - * Validate formats. If the required format is not OK, default to raw. - */ - - isc->try_config.fourcc = pixfmt->pixelformat; - - if (isc_try_validate_formats(isc)) { - pixfmt->pixelformat = isc->try_config.fourcc = sd_fmt->fourcc; - /* Re-try to validate the new format */ - ret = isc_try_validate_formats(isc); - if (ret) - goto isc_try_fmt_err; - } - - ret = isc_try_configure_rlp_dma(isc, rlp_dma_direct_dump); - if (ret) - goto isc_try_fmt_err; - - ret = isc_try_configure_pipeline(isc); - if (ret) - goto isc_try_fmt_err; - - /* Obtain frame sizes if possible to have crop requirements ready */ - isc_try_fse(isc, &pad_state); - v4l2_fill_mbus_format(&format.format, pixfmt, mbus_code); - ret = v4l2_subdev_call(isc->current_subdev->sd, pad, set_fmt, - &pad_state, &format); - if (ret < 0) - goto isc_try_fmt_subdev_err; - - v4l2_fill_pix_format(pixfmt, &format.format); + isc_try_configure_rlp_dma(isc, false); /* Limit to Microchip ISC hardware capabilities */ - if (pixfmt->width > isc->max_width) - pixfmt->width = isc->max_width; - if (pixfmt->height > isc->max_height) - pixfmt->height = isc->max_height; - + v4l_bound_align_image(&pixfmt->width, 16, isc->max_width, 0, + &pixfmt->height, 16, isc->max_height, 0, 0); + /* If we did not find the requested format, we will fallback here */ + pixfmt->pixelformat = isc->try_config.fourcc; + pixfmt->colorspace = V4L2_COLORSPACE_SRGB; pixfmt->field = V4L2_FIELD_NONE; + pixfmt->bytesperline = (pixfmt->width * isc->try_config.bpp_v4l2) >> 3; pixfmt->sizeimage = ((pixfmt->width * isc->try_config.bpp) >> 3) * pixfmt->height; - if (code) - *code = mbus_code; + isc->try_fmt = *f; return 0; +} -isc_try_fmt_err: - v4l2_err(&isc->v4l2_dev, "Could not find any possible format for a working pipeline\n"); -isc_try_fmt_subdev_err: - memset(&isc->try_config, 0, sizeof(isc->try_config)); +static int isc_set_fmt(struct isc_device *isc, struct v4l2_format *f) +{ + isc_try_fmt(isc, f); - return ret; + /* make the try configuration active */ + isc->config = isc->try_config; + isc->fmt = isc->try_fmt; + + v4l2_dbg(1, debug, &isc->v4l2_dev, "ISC set_fmt to %.4s @%dx%d\n", + (char *)&f->fmt.pix.pixelformat, + f->fmt.pix.width, f->fmt.pix.height); + + return 0; } -static int isc_set_fmt(struct isc_device *isc, struct v4l2_format *f) +static int isc_validate(struct isc_device *isc) { + int ret; + int i; + struct isc_format *sd_fmt = NULL; + struct v4l2_pix_format *pixfmt = &isc->fmt.fmt.pix; struct v4l2_subdev_format format = { .which = V4L2_SUBDEV_FORMAT_ACTIVE, + .pad = isc->remote_pad, + }; + struct v4l2_subdev_pad_config pad_cfg = {}; + struct v4l2_subdev_state pad_state = { + .pads = &pad_cfg, }; - u32 mbus_code = 0; - int ret; - ret = isc_try_fmt(isc, f, &mbus_code); + /* Get current format from subdev */ + ret = v4l2_subdev_call(isc->current_subdev->sd, pad, get_fmt, NULL, + &format); if (ret) return ret; - v4l2_fill_mbus_format(&format.format, &f->fmt.pix, mbus_code); - ret = v4l2_subdev_call(isc->current_subdev->sd, pad, - set_fmt, NULL, &format); - if (ret < 0) - return ret; + /* Identify the subdev's format configuration */ + for (i = 0; i < isc->formats_list_size; i++) + if (isc->formats_list[i].mbus_code == format.format.code) { + sd_fmt = &isc->formats_list[i]; + break; + } + + /* Check if the format is not supported */ + if (!sd_fmt) { + v4l2_err(&isc->v4l2_dev, + "Current subdevice is streaming a media bus code that is not supported 0x%x\n", + format.format.code); + return -EPIPE; + } + + /* At this moment we know which format the subdev will use */ + isc->try_config.sd_format = sd_fmt; + + /* If the sensor is not RAW, we can only do a direct dump */ + if (!ISC_IS_FORMAT_RAW(isc->try_config.sd_format->mbus_code)) + isc_try_configure_rlp_dma(isc, true); /* Limit to Microchip ISC hardware capabilities */ - if (f->fmt.pix.width > isc->max_width) - f->fmt.pix.width = isc->max_width; - if (f->fmt.pix.height > isc->max_height) - f->fmt.pix.height = isc->max_height; + v4l_bound_align_image(&format.format.width, 16, isc->max_width, 0, + &format.format.height, 16, isc->max_height, 0, 0); - isc->fmt = *f; + /* Check if the frame size is the same. Otherwise we may overflow */ + if (pixfmt->height != format.format.height || + pixfmt->width != format.format.width) { + v4l2_err(&isc->v4l2_dev, + "ISC not configured with the proper frame size: %dx%d\n", + format.format.width, format.format.height); + return -EPIPE; + } + + v4l2_dbg(1, debug, &isc->v4l2_dev, + "Identified subdev using format %.4s with %dx%d %d bpp\n", + (char *)&sd_fmt->fourcc, pixfmt->width, pixfmt->height, + isc->try_config.bpp); + /* Reset and restart AWB if the subdevice changed the format */ if (isc->try_config.sd_format && isc->config.sd_format && isc->try_config.sd_format != isc->config.sd_format) { isc->ctrls.hist_stat = HIST_INIT; isc_reset_awb_ctrls(isc); isc_update_v4l2_ctrls(isc); } - /* make the try configuration active */ + + /* Validate formats */ + ret = isc_try_validate_formats(isc); + if (ret) + return ret; + + /* Obtain frame sizes if possible to have crop requirements ready */ + isc_try_fse(isc, &pad_state); + + /* Configure ISC pipeline for the config */ + ret = isc_try_configure_pipeline(isc); + if (ret) + return ret; + isc->config = isc->try_config; v4l2_dbg(1, debug, &isc->v4l2_dev, "New ISC configuration in place\n"); @@ -1049,7 +1041,7 @@ static int isc_try_fmt_vid_cap(struct file *file, void *priv, { struct isc_device *isc = video_drvdata(file); - return isc_try_fmt(isc, f, NULL); + return isc_try_fmt(isc, f); } static int isc_enum_input(struct file *file, void *priv, @@ -1104,10 +1096,6 @@ static int isc_enum_framesizes(struct file *file, void *fh, if (fsize->index) return -EINVAL; - for (i = 0; i < isc->num_user_formats; i++) - if (isc->user_formats[i]->fourcc == fsize->pixel_format) - ret = 0; - for (i = 0; i < isc->controller_formats_size; i++) if (isc->controller_formats[i].fourcc == fsize->pixel_format) ret = 0; @@ -1785,52 +1773,6 @@ struct isc_format *isc_find_format_by_code(struct isc_device *isc, } EXPORT_SYMBOL_GPL(isc_find_format_by_code); -static int isc_formats_init(struct isc_device *isc) -{ - struct isc_format *fmt; - struct v4l2_subdev *subdev = isc->current_subdev->sd; - unsigned int num_fmts, i, j; - u32 list_size = isc->formats_list_size; - struct v4l2_subdev_mbus_code_enum mbus_code = { - .which = V4L2_SUBDEV_FORMAT_ACTIVE, - }; - - num_fmts = 0; - while (!v4l2_subdev_call(subdev, pad, enum_mbus_code, - NULL, &mbus_code)) { - mbus_code.index++; - - fmt = isc_find_format_by_code(isc, mbus_code.code, &i); - if (!fmt) { - v4l2_warn(&isc->v4l2_dev, "Mbus code %x not supported\n", - mbus_code.code); - continue; - } - - fmt->sd_support = true; - num_fmts++; - } - - if (!num_fmts) - return -ENXIO; - - isc->num_user_formats = num_fmts; - isc->user_formats = devm_kcalloc(isc->dev, - num_fmts, sizeof(*isc->user_formats), - GFP_KERNEL); - if (!isc->user_formats) - return -ENOMEM; - - fmt = &isc->formats_list[0]; - for (i = 0, j = 0; i < list_size; i++) { - if (fmt->sd_support) - isc->user_formats[j++] = fmt; - fmt++; - } - - return 0; -} - static int isc_set_default_fmt(struct isc_device *isc) { struct v4l2_format f = { @@ -1839,12 +1781,12 @@ static int isc_set_default_fmt(struct isc_device *isc) .width = VGA_WIDTH, .height = VGA_HEIGHT, .field = V4L2_FIELD_NONE, - .pixelformat = isc->user_formats[0]->fourcc, + .pixelformat = isc->controller_formats[0].fourcc, }, }; int ret; - ret = isc_try_fmt(isc, &f, NULL); + ret = isc_try_fmt(isc, &f); if (ret) return ret; @@ -1899,13 +1841,6 @@ static int isc_async_complete(struct v4l2_async_notifier *notifier) spin_lock_init(&isc->dma_queue_lock); spin_lock_init(&isc->awb_lock); - ret = isc_formats_init(isc); - if (ret < 0) { - v4l2_err(&isc->v4l2_dev, - "Init format failed: %d\n", ret); - goto isc_async_complete_err; - } - ret = isc_set_default_fmt(isc); if (ret) { v4l2_err(&isc->v4l2_dev, "Could not set default format\n"); @@ -1928,7 +1863,8 @@ static int isc_async_complete(struct v4l2_async_notifier *notifier) vdev->queue = q; vdev->lock = &isc->lock; vdev->ctrl_handler = &isc->ctrls.handler; - vdev->device_caps = V4L2_CAP_STREAMING | V4L2_CAP_VIDEO_CAPTURE; + vdev->device_caps = V4L2_CAP_STREAMING | V4L2_CAP_VIDEO_CAPTURE | + V4L2_CAP_IO_MC; video_set_drvdata(vdev, isc); ret = video_register_device(vdev, VFL_TYPE_VIDEO, -1); @@ -2018,6 +1954,24 @@ int microchip_isc_pipeline_init(struct isc_device *isc) } EXPORT_SYMBOL_GPL(microchip_isc_pipeline_init); +static int isc_link_validate(struct media_link *link) +{ + struct video_device *vdev = + media_entity_to_video_device(link->sink->entity); + struct isc_device *isc = video_get_drvdata(vdev); + int ret; + + ret = v4l2_subdev_link_validate(link); + if (ret) + return ret; + + return isc_validate(isc); +} + +static const struct media_entity_operations isc_entity_operations = { + .link_validate = isc_link_validate, +}; + int isc_mc_init(struct isc_device *isc, u32 ver) { const struct of_device_id *match; @@ -2025,6 +1979,8 @@ int isc_mc_init(struct isc_device *isc, u32 ver) isc->video_dev.entity.function = MEDIA_ENT_F_IO_V4L; isc->video_dev.entity.flags = MEDIA_ENT_FL_DEFAULT; + isc->video_dev.entity.ops = &isc_entity_operations; + isc->pads[ISC_PAD_SINK].flags = MEDIA_PAD_FL_SINK; ret = media_entity_pads_init(&isc->video_dev.entity, ISC_PADS_NUM, diff --git a/drivers/media/platform/microchip/microchip-isc-scaler.c b/drivers/media/platform/microchip/microchip-isc-scaler.c index 80fff803e6bb..0f29a32d15ce 100644 --- a/drivers/media/platform/microchip/microchip-isc-scaler.c +++ b/drivers/media/platform/microchip/microchip-isc-scaler.c @@ -173,6 +173,10 @@ static const struct v4l2_subdev_pad_ops isc_scaler_pad_ops = { .init_cfg = isc_scaler_init_cfg, }; +static const struct media_entity_operations isc_scaler_entity_ops = { + .link_validate = v4l2_subdev_link_validate, +}; + static const struct v4l2_subdev_ops xisc_scaler_subdev_ops = { .pad = &isc_scaler_pad_ops, }; @@ -190,6 +194,7 @@ int isc_scaler_init(struct isc_device *isc) isc->scaler_sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; isc->scaler_sd.entity.function = MEDIA_ENT_F_PROC_VIDEO_SCALER; + isc->scaler_sd.entity.ops = &isc_scaler_entity_ops; isc->scaler_pads[ISC_SCALER_PAD_SINK].flags = MEDIA_PAD_FL_SINK; isc->scaler_pads[ISC_SCALER_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE; diff --git a/drivers/media/platform/microchip/microchip-isc.h b/drivers/media/platform/microchip/microchip-isc.h index 1ba951df4f15..e3a6c7367e70 100644 --- a/drivers/media/platform/microchip/microchip-isc.h +++ b/drivers/media/platform/microchip/microchip-isc.h @@ -63,15 +63,16 @@ struct isc_subdev_entity { * @cfa_baycfg: If this format is RAW BAYER, indicate the type of bayer. this is either BGBG, RGRG, etc. * @pfe_cfg0_bps: Number of hardware data lines connected to the ISC + * @raw: If the format is raw bayer. */ struct isc_format { u32 fourcc; u32 mbus_code; u32 cfa_baycfg; - - bool sd_support; u32 pfe_cfg0_bps; + + bool raw; }; /* Pipeline bitmap */ @@ -216,8 +217,7 @@ enum isc_scaler_pads { * @comp: completion reference that signals frame completion * * @fmt: current v42l format - * @user_formats: list of formats that are supported and agreed with sd - * @num_user_formats: how many formats are in user_formats + * @try_fmt: current v4l2 try format * * @config: current ISC format configuration * @try_config: the current ISC try format , not yet activated @@ -272,6 +272,7 @@ enum isc_scaler_pads { * @formats_list_size: size of formats_list array * @pads: media controller pads for isc video entity * @mdev: media device that is registered by the isc + * @mpipe: media device pipeline used by the isc * @remote_pad: remote pad on the connected subdevice * @scaler_sd: subdevice for the scaler that isc registers * @scaler_pads: media controller pads for the scaler subdevice @@ -298,8 +299,7 @@ struct isc_device { struct completion comp; struct v4l2_format fmt; - struct isc_format **user_formats; - unsigned int num_user_formats; + struct v4l2_format try_fmt; struct fmt_config config; struct fmt_config try_config; @@ -369,6 +369,7 @@ struct isc_device { struct { struct media_pad pads[ISC_PADS_NUM]; struct media_device mdev; + struct media_pipeline mpipe; u32 remote_pad; }; diff --git a/drivers/media/platform/microchip/microchip-sama5d2-isc.c b/drivers/media/platform/microchip/microchip-sama5d2-isc.c index c702d2537738..ac4715d91de6 100644 --- a/drivers/media/platform/microchip/microchip-sama5d2-isc.c +++ b/drivers/media/platform/microchip/microchip-sama5d2-isc.c @@ -80,20 +80,40 @@ static const struct isc_format sama5d2_controller_formats[] = { .fourcc = V4L2_PIX_FMT_Y10, }, { .fourcc = V4L2_PIX_FMT_SBGGR8, + .raw = true, }, { .fourcc = V4L2_PIX_FMT_SGBRG8, + .raw = true, }, { .fourcc = V4L2_PIX_FMT_SGRBG8, + .raw = true, }, { .fourcc = V4L2_PIX_FMT_SRGGB8, + .raw = true, }, { .fourcc = V4L2_PIX_FMT_SBGGR10, + .raw = true, }, { .fourcc = V4L2_PIX_FMT_SGBRG10, + .raw = true, }, { .fourcc = V4L2_PIX_FMT_SGRBG10, + .raw = true, }, { .fourcc = V4L2_PIX_FMT_SRGGB10, + .raw = true, + }, { + .fourcc = V4L2_PIX_FMT_SBGGR12, + .raw = true, + }, { + .fourcc = V4L2_PIX_FMT_SGBRG12, + .raw = true, + }, { + .fourcc = V4L2_PIX_FMT_SGRBG12, + .raw = true, + }, { + .fourcc = V4L2_PIX_FMT_SRGGB12, + .raw = true, }, }; diff --git a/drivers/media/platform/microchip/microchip-sama7g5-isc.c b/drivers/media/platform/microchip/microchip-sama7g5-isc.c index 75a0a5caa8d8..d583eafe5cc1 100644 --- a/drivers/media/platform/microchip/microchip-sama7g5-isc.c +++ b/drivers/media/platform/microchip/microchip-sama7g5-isc.c @@ -89,20 +89,40 @@ static const struct isc_format sama7g5_controller_formats[] = { .fourcc = V4L2_PIX_FMT_Y16, }, { .fourcc = V4L2_PIX_FMT_SBGGR8, + .raw = true, }, { .fourcc = V4L2_PIX_FMT_SGBRG8, + .raw = true, }, { .fourcc = V4L2_PIX_FMT_SGRBG8, + .raw = true, }, { .fourcc = V4L2_PIX_FMT_SRGGB8, + .raw = true, }, { .fourcc = V4L2_PIX_FMT_SBGGR10, + .raw = true, }, { .fourcc = V4L2_PIX_FMT_SGBRG10, + .raw = true, }, { .fourcc = V4L2_PIX_FMT_SGRBG10, + .raw = true, }, { .fourcc = V4L2_PIX_FMT_SRGGB10, + .raw = true, + }, { + .fourcc = V4L2_PIX_FMT_SBGGR12, + .raw = true, + }, { + .fourcc = V4L2_PIX_FMT_SGBRG12, + .raw = true, + }, { + .fourcc = V4L2_PIX_FMT_SGRBG12, + .raw = true, + }, { + .fourcc = V4L2_PIX_FMT_SRGGB12, + .raw = true, }, }; |