aboutsummaryrefslogtreecommitdiff
path: root/drivers/media/dvb-frontends
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/dvb-frontends')
-rw-r--r--drivers/media/dvb-frontends/Kconfig12
-rw-r--r--drivers/media/dvb-frontends/Makefile1
-rw-r--r--drivers/media/dvb-frontends/drx39xyj/drxj.h35
-rw-r--r--drivers/media/dvb-frontends/mxl692.c4
-rw-r--r--drivers/media/dvb-frontends/rtl2832_sdr.c4
-rw-r--r--drivers/media/dvb-frontends/sp8870.c609
-rw-r--r--drivers/media/dvb-frontends/sp8870.h37
7 files changed, 21 insertions, 681 deletions
diff --git a/drivers/media/dvb-frontends/Kconfig b/drivers/media/dvb-frontends/Kconfig
index 3468b07b62fe..2c1ed98d43c5 100644
--- a/drivers/media/dvb-frontends/Kconfig
+++ b/drivers/media/dvb-frontends/Kconfig
@@ -323,18 +323,6 @@ config DVB_TDA10071
comment "DVB-T (terrestrial) frontends"
depends on DVB_CORE
-config DVB_SP8870
- tristate "Spase sp8870 based"
- depends on DVB_CORE && I2C
- default m if !MEDIA_SUBDRV_AUTOSELECT
- help
- A DVB-T tuner module. Say Y when you want to support this frontend.
-
- This driver needs external firmware. Please use the command
- "<kerneldir>/scripts/get_dvb_firmware sp8870" to
- download/extract it, and then copy it to /usr/lib/hotplug/firmware
- or /lib/firmware (depending on configuration of firmware hotplug).
-
config DVB_SP887X
tristate "Spase sp887x based"
depends on DVB_CORE && I2C
diff --git a/drivers/media/dvb-frontends/Makefile b/drivers/media/dvb-frontends/Makefile
index b9f47d68e14e..d32e4c0be576 100644
--- a/drivers/media/dvb-frontends/Makefile
+++ b/drivers/media/dvb-frontends/Makefile
@@ -20,7 +20,6 @@ obj-$(CONFIG_DVB_PLL) += dvb-pll.o
obj-$(CONFIG_DVB_STV0299) += stv0299.o
obj-$(CONFIG_DVB_STB0899) += stb0899.o
obj-$(CONFIG_DVB_STB6100) += stb6100.o
-obj-$(CONFIG_DVB_SP8870) += sp8870.o
obj-$(CONFIG_DVB_CX22700) += cx22700.o
obj-$(CONFIG_DVB_S5H1432) += s5h1432.o
obj-$(CONFIG_DVB_CX24110) += cx24110.o
diff --git a/drivers/media/dvb-frontends/drx39xyj/drxj.h b/drivers/media/dvb-frontends/drx39xyj/drxj.h
index d62412f71c88..232b3b0d68c8 100644
--- a/drivers/media/dvb-frontends/drx39xyj/drxj.h
+++ b/drivers/media/dvb-frontends/drx39xyj/drxj.h
@@ -75,9 +75,9 @@ TYPEDEFS
u16 result_len;
/*< result length in byte */
u16 *parameter;
- /*< General purpous param */
+ /*< General purpose param */
u16 *result;
- /*< General purpous param */};
+ /*< General purpose param */};
/*============================================================================*/
/*============================================================================*/
@@ -131,7 +131,7 @@ TYPEDEFS
DRXJ_CFG_MAX /* dummy, never to be used */};
/*
-* /struct enum drxj_cfg_smart_ant_io * smart antenna i/o.
+* /enum drxj_cfg_smart_ant_io * smart antenna i/o.
*/
enum drxj_cfg_smart_ant_io {
DRXJ_SMT_ANT_OUTPUT = 0,
@@ -139,7 +139,7 @@ enum drxj_cfg_smart_ant_io {
};
/*
-* /struct struct drxj_cfg_smart_ant * Set smart antenna.
+* /struct drxj_cfg_smart_ant * Set smart antenna.
*/
struct drxj_cfg_smart_ant {
enum drxj_cfg_smart_ant_io io;
@@ -159,7 +159,7 @@ struct drxj_agc_status {
/* DRXJ_CFG_AGC_RF, DRXJ_CFG_AGC_IF */
/*
-* /struct enum drxj_agc_ctrl_mode * Available AGCs modes in the DRXJ.
+* /enum drxj_agc_ctrl_mode * Available AGCs modes in the DRXJ.
*/
enum drxj_agc_ctrl_mode {
DRX_AGC_CTRL_AUTO = 0,
@@ -167,7 +167,7 @@ struct drxj_agc_status {
DRX_AGC_CTRL_OFF};
/*
-* /struct struct drxj_cfg_agc * Generic interface for all AGCs present on the DRXJ.
+* /struct drxj_cfg_agc * Generic interface for all AGCs present on the DRXJ.
*/
struct drxj_cfg_agc {
enum drx_standard standard; /* standard for which these settings apply */
@@ -183,7 +183,7 @@ struct drxj_agc_status {
/* DRXJ_CFG_PRE_SAW */
/*
-* /struct struct drxj_cfg_pre_saw * Interface to configure pre SAW sense.
+* /struct drxj_cfg_pre_saw * Interface to configure pre SAW sense.
*/
struct drxj_cfg_pre_saw {
enum drx_standard standard; /* standard to which these settings apply */
@@ -193,7 +193,7 @@ struct drxj_agc_status {
/* DRXJ_CFG_AFE_GAIN */
/*
-* /struct struct drxj_cfg_afe_gain * Interface to configure gain of AFE (LNA + PGA).
+* /struct drxj_cfg_afe_gain * Interface to configure gain of AFE (LNA + PGA).
*/
struct drxj_cfg_afe_gain {
enum drx_standard standard; /* standard to which these settings apply */
@@ -220,14 +220,14 @@ struct drxj_agc_status {
};
/*
-* /struct struct drxj_cfg_vsb_misc * symbol error rate
+* /struct drxj_cfg_vsb_misc * symbol error rate
*/
struct drxj_cfg_vsb_misc {
u32 symb_error;
/*< symbol error rate sps */};
/*
-* /enum enum drxj_mpeg_output_clock_rate * Mpeg output clock rate.
+* /enum drxj_mpeg_output_clock_rate * Mpeg output clock rate.
*
*/
enum drxj_mpeg_start_width {
@@ -235,7 +235,7 @@ struct drxj_agc_status {
DRXJ_MPEG_START_WIDTH_8CLKCYC};
/*
-* /enum enum drxj_mpeg_output_clock_rate * Mpeg output clock rate.
+* /enum drxj_mpeg_output_clock_rate * Mpeg output clock rate.
*
*/
enum drxj_mpeg_output_clock_rate {
@@ -261,7 +261,7 @@ struct drxj_agc_status {
enum drxj_mpeg_start_width mpeg_start_width; /*< set MPEG output start width */};
/*
-* /enum enum drxj_xtal_freq * Supported external crystal reference frequency.
+* /enum drxj_xtal_freq * Supported external crystal reference frequency.
*/
enum drxj_xtal_freq {
DRXJ_XTAL_FREQ_RSVD,
@@ -270,14 +270,15 @@ struct drxj_agc_status {
DRXJ_XTAL_FREQ_4MHZ};
/*
-* /enum enum drxj_xtal_freq * Supported external crystal reference frequency.
+* /enum drxj_xtal_freq * Supported external crystal reference frequency.
*/
enum drxji2c_speed {
DRXJ_I2C_SPEED_400KBPS,
DRXJ_I2C_SPEED_100KBPS};
/*
-* /struct struct drxj_cfg_hw_cfg * Get hw configuration, such as crystal reference frequency, I2C speed, etc...
+* /struct drxj_cfg_hw_cfg * Get hw configuration, such as crystal
+* reference frequency, I2C speed, etc...
*/
struct drxj_cfg_hw_cfg {
enum drxj_xtal_freq xtal_freq;
@@ -364,7 +365,7 @@ struct drxj_cfg_oob_misc {
DRXJ_SIF_ATTENUATION_9DB};
/*
-* /struct struct drxj_cfg_atv_output * SIF attenuation setting.
+* /struct drxj_cfg_atv_output * SIF attenuation setting.
*
*/
struct drxj_cfg_atv_output {
@@ -453,10 +454,10 @@ struct drxj_cfg_atv_output {
enum drxuio_mode uio_gpio_mode; /*< current mode of ASEL pin */
enum drxuio_mode uio_irqn_mode; /*< current mode of IRQN pin */
- /* IQM fs frequecy shift and inversion */
+ /* IQM fs frequency shift and inversion */
u32 iqm_fs_rate_ofs; /*< frequency shifter setting after setchannel */
bool pos_image; /*< True: positive image */
- /* IQM RC frequecy shift */
+ /* IQM RC frequency shift */
u32 iqm_rc_rate_ofs; /*< frequency shifter setting after setchannel */
/* ATV configuration */
diff --git a/drivers/media/dvb-frontends/mxl692.c b/drivers/media/dvb-frontends/mxl692.c
index 83030643aba7..a246db683cdf 100644
--- a/drivers/media/dvb-frontends/mxl692.c
+++ b/drivers/media/dvb-frontends/mxl692.c
@@ -224,7 +224,9 @@ static int mxl692_validate_fw_header(struct mxl692_dev *dev,
u32 ix, temp;
__be32 *local_buf = NULL;
u8 temp_cksum = 0;
- const u8 fw_hdr[] = { 0x4D, 0x31, 0x10, 0x02, 0x40, 0x00, 0x00, 0x80 };
+ static const u8 fw_hdr[] = {
+ 0x4D, 0x31, 0x10, 0x02, 0x40, 0x00, 0x00, 0x80
+ };
if (memcmp(buffer, fw_hdr, 8) != 0) {
status = -EINVAL;
diff --git a/drivers/media/dvb-frontends/rtl2832_sdr.c b/drivers/media/dvb-frontends/rtl2832_sdr.c
index ef6feb299d46..1a2f0d2adadf 100644
--- a/drivers/media/dvb-frontends/rtl2832_sdr.c
+++ b/drivers/media/dvb-frontends/rtl2832_sdr.c
@@ -1130,8 +1130,6 @@ static int rtl2832_sdr_g_fmt_sdr_cap(struct file *file, void *priv,
f->fmt.sdr.pixelformat = dev->pixelformat;
f->fmt.sdr.buffersize = dev->buffersize;
- memset(f->fmt.sdr.reserved, 0, sizeof(f->fmt.sdr.reserved));
-
return 0;
}
@@ -1149,7 +1147,6 @@ static int rtl2832_sdr_s_fmt_sdr_cap(struct file *file, void *priv,
if (vb2_is_busy(q))
return -EBUSY;
- memset(f->fmt.sdr.reserved, 0, sizeof(f->fmt.sdr.reserved));
for (i = 0; i < dev->num_formats; i++) {
if (formats[i].pixelformat == f->fmt.sdr.pixelformat) {
dev->pixelformat = formats[i].pixelformat;
@@ -1177,7 +1174,6 @@ static int rtl2832_sdr_try_fmt_sdr_cap(struct file *file, void *priv,
dev_dbg(&pdev->dev, "pixelformat fourcc %4.4s\n",
(char *)&f->fmt.sdr.pixelformat);
- memset(f->fmt.sdr.reserved, 0, sizeof(f->fmt.sdr.reserved));
for (i = 0; i < dev->num_formats; i++) {
if (formats[i].pixelformat == f->fmt.sdr.pixelformat) {
f->fmt.sdr.buffersize = formats[i].buffersize;
diff --git a/drivers/media/dvb-frontends/sp8870.c b/drivers/media/dvb-frontends/sp8870.c
deleted file mode 100644
index 655db8272268..000000000000
--- a/drivers/media/dvb-frontends/sp8870.c
+++ /dev/null
@@ -1,609 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- Driver for Spase SP8870 demodulator
-
- Copyright (C) 1999 Juergen Peitz
-
-
-*/
-/*
- * This driver needs external firmware. Please use the command
- * "<kerneldir>/scripts/get_dvb_firmware alps_tdlb7" to
- * download/extract it, and then copy it to /usr/lib/hotplug/firmware
- * or /lib/firmware (depending on configuration of firmware hotplug).
- */
-#define SP8870_DEFAULT_FIRMWARE "dvb-fe-sp8870.fw"
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/firmware.h>
-#include <linux/delay.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-
-#include <media/dvb_frontend.h>
-#include "sp8870.h"
-
-
-struct sp8870_state {
-
- struct i2c_adapter* i2c;
-
- const struct sp8870_config* config;
-
- struct dvb_frontend frontend;
-
- /* demodulator private data */
- u8 initialised:1;
-};
-
-static int debug;
-#define dprintk(args...) \
- do { \
- if (debug) printk(KERN_DEBUG "sp8870: " args); \
- } while (0)
-
-/* firmware size for sp8870 */
-#define SP8870_FIRMWARE_SIZE 16382
-
-/* starting point for firmware in file 'Sc_main.mc' */
-#define SP8870_FIRMWARE_OFFSET 0x0A
-
-static int sp8870_writereg (struct sp8870_state* state, u16 reg, u16 data)
-{
- u8 buf [] = { reg >> 8, reg & 0xff, data >> 8, data & 0xff };
- struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 4 };
- int err;
-
- if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
- dprintk ("%s: writereg error (err == %i, reg == 0x%02x, data == 0x%02x)\n", __func__, err, reg, data);
- return -EREMOTEIO;
- }
-
- return 0;
-}
-
-static int sp8870_readreg (struct sp8870_state* state, u16 reg)
-{
- int ret;
- u8 b0 [] = { reg >> 8 , reg & 0xff };
- u8 b1 [] = { 0, 0 };
- struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 2 },
- { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 2 } };
-
- ret = i2c_transfer (state->i2c, msg, 2);
-
- if (ret != 2) {
- dprintk("%s: readreg error (ret == %i)\n", __func__, ret);
- return -1;
- }
-
- return (b1[0] << 8 | b1[1]);
-}
-
-static int sp8870_firmware_upload (struct sp8870_state* state, const struct firmware *fw)
-{
- struct i2c_msg msg;
- const char *fw_buf = fw->data;
- int fw_pos;
- u8 tx_buf[255];
- int tx_len;
- int err = 0;
-
- dprintk ("%s: ...\n", __func__);
-
- if (fw->size < SP8870_FIRMWARE_SIZE + SP8870_FIRMWARE_OFFSET)
- return -EINVAL;
-
- // system controller stop
- sp8870_writereg(state, 0x0F00, 0x0000);
-
- // instruction RAM register hiword
- sp8870_writereg(state, 0x8F08, ((SP8870_FIRMWARE_SIZE / 2) & 0xFFFF));
-
- // instruction RAM MWR
- sp8870_writereg(state, 0x8F0A, ((SP8870_FIRMWARE_SIZE / 2) >> 16));
-
- // do firmware upload
- fw_pos = SP8870_FIRMWARE_OFFSET;
- while (fw_pos < SP8870_FIRMWARE_SIZE + SP8870_FIRMWARE_OFFSET){
- tx_len = (fw_pos <= SP8870_FIRMWARE_SIZE + SP8870_FIRMWARE_OFFSET - 252) ? 252 : SP8870_FIRMWARE_SIZE + SP8870_FIRMWARE_OFFSET - fw_pos;
- // write register 0xCF0A
- tx_buf[0] = 0xCF;
- tx_buf[1] = 0x0A;
- memcpy(&tx_buf[2], fw_buf + fw_pos, tx_len);
- msg.addr = state->config->demod_address;
- msg.flags = 0;
- msg.buf = tx_buf;
- msg.len = tx_len + 2;
- if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
- printk("%s: firmware upload failed!\n", __func__);
- printk ("%s: i2c error (err == %i)\n", __func__, err);
- return err;
- }
- fw_pos += tx_len;
- }
-
- dprintk ("%s: done!\n", __func__);
- return 0;
-};
-
-static void sp8870_microcontroller_stop (struct sp8870_state* state)
-{
- sp8870_writereg(state, 0x0F08, 0x000);
- sp8870_writereg(state, 0x0F09, 0x000);
-
- // microcontroller STOP
- sp8870_writereg(state, 0x0F00, 0x000);
-}
-
-static void sp8870_microcontroller_start (struct sp8870_state* state)
-{
- sp8870_writereg(state, 0x0F08, 0x000);
- sp8870_writereg(state, 0x0F09, 0x000);
-
- // microcontroller START
- sp8870_writereg(state, 0x0F00, 0x001);
- // not documented but if we don't read 0x0D01 out here
- // we don't get a correct data valid signal
- sp8870_readreg(state, 0x0D01);
-}
-
-static int sp8870_read_data_valid_signal(struct sp8870_state* state)
-{
- return (sp8870_readreg(state, 0x0D02) > 0);
-}
-
-static int configure_reg0xc05 (struct dtv_frontend_properties *p, u16 *reg0xc05)
-{
- int known_parameters = 1;
-
- *reg0xc05 = 0x000;
-
- switch (p->modulation) {
- case QPSK:
- break;
- case QAM_16:
- *reg0xc05 |= (1 << 10);
- break;
- case QAM_64:
- *reg0xc05 |= (2 << 10);
- break;
- case QAM_AUTO:
- known_parameters = 0;
- break;
- default:
- return -EINVAL;
- }
-
- switch (p->hierarchy) {
- case HIERARCHY_NONE:
- break;
- case HIERARCHY_1:
- *reg0xc05 |= (1 << 7);
- break;
- case HIERARCHY_2:
- *reg0xc05 |= (2 << 7);
- break;
- case HIERARCHY_4:
- *reg0xc05 |= (3 << 7);
- break;
- case HIERARCHY_AUTO:
- known_parameters = 0;
- break;
- default:
- return -EINVAL;
- }
-
- switch (p->code_rate_HP) {
- case FEC_1_2:
- break;
- case FEC_2_3:
- *reg0xc05 |= (1 << 3);
- break;
- case FEC_3_4:
- *reg0xc05 |= (2 << 3);
- break;
- case FEC_5_6:
- *reg0xc05 |= (3 << 3);
- break;
- case FEC_7_8:
- *reg0xc05 |= (4 << 3);
- break;
- case FEC_AUTO:
- known_parameters = 0;
- break;
- default:
- return -EINVAL;
- }
-
- if (known_parameters)
- *reg0xc05 |= (2 << 1); /* use specified parameters */
- else
- *reg0xc05 |= (1 << 1); /* enable autoprobing */
-
- return 0;
-}
-
-static int sp8870_wake_up(struct sp8870_state* state)
-{
- // enable TS output and interface pins
- return sp8870_writereg(state, 0xC18, 0x00D);
-}
-
-static int sp8870_set_frontend_parameters(struct dvb_frontend *fe)
-{
- struct dtv_frontend_properties *p = &fe->dtv_property_cache;
- struct sp8870_state* state = fe->demodulator_priv;
- int err;
- u16 reg0xc05;
-
- if ((err = configure_reg0xc05(p, &reg0xc05)))
- return err;
-
- // system controller stop
- sp8870_microcontroller_stop(state);
-
- // set tuner parameters
- if (fe->ops.tuner_ops.set_params) {
- fe->ops.tuner_ops.set_params(fe);
- if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0);
- }
-
- // sample rate correction bit [23..17]
- sp8870_writereg(state, 0x0319, 0x000A);
-
- // sample rate correction bit [16..0]
- sp8870_writereg(state, 0x031A, 0x0AAB);
-
- // integer carrier offset
- sp8870_writereg(state, 0x0309, 0x0400);
-
- // fractional carrier offset
- sp8870_writereg(state, 0x030A, 0x0000);
-
- // filter for 6/7/8 Mhz channel
- if (p->bandwidth_hz == 6000000)
- sp8870_writereg(state, 0x0311, 0x0002);
- else if (p->bandwidth_hz == 7000000)
- sp8870_writereg(state, 0x0311, 0x0001);
- else
- sp8870_writereg(state, 0x0311, 0x0000);
-
- // scan order: 2k first = 0x0000, 8k first = 0x0001
- if (p->transmission_mode == TRANSMISSION_MODE_2K)
- sp8870_writereg(state, 0x0338, 0x0000);
- else
- sp8870_writereg(state, 0x0338, 0x0001);
-
- sp8870_writereg(state, 0xc05, reg0xc05);
-
- // read status reg in order to clear pending irqs
- err = sp8870_readreg(state, 0x200);
- if (err)
- return err;
-
- // system controller start
- sp8870_microcontroller_start(state);
-
- return 0;
-}
-
-static int sp8870_init (struct dvb_frontend* fe)
-{
- struct sp8870_state* state = fe->demodulator_priv;
- const struct firmware *fw = NULL;
-
- sp8870_wake_up(state);
- if (state->initialised) return 0;
- state->initialised = 1;
-
- dprintk ("%s\n", __func__);
-
-
- /* request the firmware, this will block until someone uploads it */
- printk("sp8870: waiting for firmware upload (%s)...\n", SP8870_DEFAULT_FIRMWARE);
- if (state->config->request_firmware(fe, &fw, SP8870_DEFAULT_FIRMWARE)) {
- printk("sp8870: no firmware upload (timeout or file not found?)\n");
- return -EIO;
- }
-
- if (sp8870_firmware_upload(state, fw)) {
- printk("sp8870: writing firmware to device failed\n");
- release_firmware(fw);
- return -EIO;
- }
- release_firmware(fw);
- printk("sp8870: firmware upload complete\n");
-
- /* enable TS output and interface pins */
- sp8870_writereg(state, 0xc18, 0x00d);
-
- // system controller stop
- sp8870_microcontroller_stop(state);
-
- // ADC mode
- sp8870_writereg(state, 0x0301, 0x0003);
-
- // Reed Solomon parity bytes passed to output
- sp8870_writereg(state, 0x0C13, 0x0001);
-
- // MPEG clock is suppressed if no valid data
- sp8870_writereg(state, 0x0C14, 0x0001);
-
- /* bit 0x010: enable data valid signal */
- sp8870_writereg(state, 0x0D00, 0x010);
- sp8870_writereg(state, 0x0D01, 0x000);
-
- return 0;
-}
-
-static int sp8870_read_status(struct dvb_frontend *fe,
- enum fe_status *fe_status)
-{
- struct sp8870_state* state = fe->demodulator_priv;
- int status;
- int signal;
-
- *fe_status = 0;
-
- status = sp8870_readreg (state, 0x0200);
- if (status < 0)
- return -EIO;
-
- signal = sp8870_readreg (state, 0x0303);
- if (signal < 0)
- return -EIO;
-
- if (signal > 0x0F)
- *fe_status |= FE_HAS_SIGNAL;
- if (status & 0x08)
- *fe_status |= FE_HAS_SYNC;
- if (status & 0x04)
- *fe_status |= FE_HAS_LOCK | FE_HAS_CARRIER | FE_HAS_VITERBI;
-
- return 0;
-}
-
-static int sp8870_read_ber (struct dvb_frontend* fe, u32 * ber)
-{
- struct sp8870_state* state = fe->demodulator_priv;
- int ret;
- u32 tmp;
-
- *ber = 0;
-
- ret = sp8870_readreg(state, 0xC08);
- if (ret < 0)
- return -EIO;
-
- tmp = ret & 0x3F;
-
- ret = sp8870_readreg(state, 0xC07);
- if (ret < 0)
- return -EIO;
-
- tmp = ret << 6;
- if (tmp >= 0x3FFF0)
- tmp = ~0;
-
- *ber = tmp;
-
- return 0;
-}
-
-static int sp8870_read_signal_strength(struct dvb_frontend* fe, u16 * signal)
-{
- struct sp8870_state* state = fe->demodulator_priv;
- int ret;
- u16 tmp;
-
- *signal = 0;
-
- ret = sp8870_readreg (state, 0x306);
- if (ret < 0)
- return -EIO;
-
- tmp = ret << 8;
-
- ret = sp8870_readreg (state, 0x303);
- if (ret < 0)
- return -EIO;
-
- tmp |= ret;
-
- if (tmp)
- *signal = 0xFFFF - tmp;
-
- return 0;
-}
-
-static int sp8870_read_uncorrected_blocks (struct dvb_frontend* fe, u32* ublocks)
-{
- struct sp8870_state* state = fe->demodulator_priv;
- int ret;
-
- *ublocks = 0;
-
- ret = sp8870_readreg(state, 0xC0C);
- if (ret < 0)
- return -EIO;
-
- if (ret == 0xFFFF)
- ret = ~0;
-
- *ublocks = ret;
-
- return 0;
-}
-
-/* number of trials to recover from lockup */
-#define MAXTRIALS 5
-/* maximum checks for data valid signal */
-#define MAXCHECKS 100
-
-/* only for debugging: counter for detected lockups */
-static int lockups;
-/* only for debugging: counter for channel switches */
-static int switches;
-
-static int sp8870_set_frontend(struct dvb_frontend *fe)
-{
- struct dtv_frontend_properties *p = &fe->dtv_property_cache;
- struct sp8870_state* state = fe->demodulator_priv;
-
- /*
- The firmware of the sp8870 sometimes locks up after setting frontend parameters.
- We try to detect this by checking the data valid signal.
- If it is not set after MAXCHECKS we try to recover the lockup by setting
- the frontend parameters again.
- */
-
- int err = 0;
- int valid = 0;
- int trials = 0;
- int check_count = 0;
-
- dprintk("%s: frequency = %i\n", __func__, p->frequency);
-
- for (trials = 1; trials <= MAXTRIALS; trials++) {
-
- err = sp8870_set_frontend_parameters(fe);
- if (err)
- return err;
-
- for (check_count = 0; check_count < MAXCHECKS; check_count++) {
-// valid = ((sp8870_readreg(i2c, 0x0200) & 4) == 0);
- valid = sp8870_read_data_valid_signal(state);
- if (valid) {
- dprintk("%s: delay = %i usec\n",
- __func__, check_count * 10);
- break;
- }
- udelay(10);
- }
- if (valid)
- break;
- }
-
- if (!valid) {
- printk("%s: firmware crash!!!!!!\n", __func__);
- return -EIO;
- }
-
- if (debug) {
- if (valid) {
- if (trials > 1) {
- printk("%s: firmware lockup!!!\n", __func__);
- printk("%s: recovered after %i trial(s))\n", __func__, trials - 1);
- lockups++;
- }
- }
- switches++;
- printk("%s: switches = %i lockups = %i\n", __func__, switches, lockups);
- }
-
- return 0;
-}
-
-static int sp8870_sleep(struct dvb_frontend* fe)
-{
- struct sp8870_state* state = fe->demodulator_priv;
-
- // tristate TS output and disable interface pins
- return sp8870_writereg(state, 0xC18, 0x000);
-}
-
-static int sp8870_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings)
-{
- fesettings->min_delay_ms = 350;
- fesettings->step_size = 0;
- fesettings->max_drift = 0;
- return 0;
-}
-
-static int sp8870_i2c_gate_ctrl(struct dvb_frontend* fe, int enable)
-{
- struct sp8870_state* state = fe->demodulator_priv;
-
- if (enable) {
- return sp8870_writereg(state, 0x206, 0x001);
- } else {
- return sp8870_writereg(state, 0x206, 0x000);
- }
-}
-
-static void sp8870_release(struct dvb_frontend* fe)
-{
- struct sp8870_state* state = fe->demodulator_priv;
- kfree(state);
-}
-
-static const struct dvb_frontend_ops sp8870_ops;
-
-struct dvb_frontend* sp8870_attach(const struct sp8870_config* config,
- struct i2c_adapter* i2c)
-{
- struct sp8870_state* state = NULL;
-
- /* allocate memory for the internal state */
- state = kzalloc(sizeof(struct sp8870_state), GFP_KERNEL);
- if (state == NULL) goto error;
-
- /* setup the state */
- state->config = config;
- state->i2c = i2c;
- state->initialised = 0;
-
- /* check if the demod is there */
- if (sp8870_readreg(state, 0x0200) < 0) goto error;
-
- /* create dvb_frontend */
- memcpy(&state->frontend.ops, &sp8870_ops, sizeof(struct dvb_frontend_ops));
- state->frontend.demodulator_priv = state;
- return &state->frontend;
-
-error:
- kfree(state);
- return NULL;
-}
-
-static const struct dvb_frontend_ops sp8870_ops = {
- .delsys = { SYS_DVBT },
- .info = {
- .name = "Spase SP8870 DVB-T",
- .frequency_min_hz = 470 * MHz,
- .frequency_max_hz = 860 * MHz,
- .frequency_stepsize_hz = 166666,
- .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 |
- FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 |
- FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
- FE_CAN_QPSK | FE_CAN_QAM_16 |
- FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
- FE_CAN_HIERARCHY_AUTO | FE_CAN_RECOVER
- },
-
- .release = sp8870_release,
-
- .init = sp8870_init,
- .sleep = sp8870_sleep,
- .i2c_gate_ctrl = sp8870_i2c_gate_ctrl,
-
- .set_frontend = sp8870_set_frontend,
- .get_tune_settings = sp8870_get_tune_settings,
-
- .read_status = sp8870_read_status,
- .read_ber = sp8870_read_ber,
- .read_signal_strength = sp8870_read_signal_strength,
- .read_ucblocks = sp8870_read_uncorrected_blocks,
-};
-
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
-
-MODULE_DESCRIPTION("Spase SP8870 DVB-T Demodulator driver");
-MODULE_AUTHOR("Juergen Peitz");
-MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(sp8870_attach);
diff --git a/drivers/media/dvb-frontends/sp8870.h b/drivers/media/dvb-frontends/sp8870.h
deleted file mode 100644
index 5eacf39f425e..000000000000
--- a/drivers/media/dvb-frontends/sp8870.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- Driver for Spase SP8870 demodulator
-
- Copyright (C) 1999 Juergen Peitz
-
-
-*/
-
-#ifndef SP8870_H
-#define SP8870_H
-
-#include <linux/dvb/frontend.h>
-#include <linux/firmware.h>
-
-struct sp8870_config
-{
- /* the demodulator's i2c address */
- u8 demod_address;
-
- /* request firmware for device */
- int (*request_firmware)(struct dvb_frontend* fe, const struct firmware **fw, char* name);
-};
-
-#if IS_REACHABLE(CONFIG_DVB_SP8870)
-extern struct dvb_frontend* sp8870_attach(const struct sp8870_config* config,
- struct i2c_adapter* i2c);
-#else
-static inline struct dvb_frontend* sp8870_attach(const struct sp8870_config* config,
- struct i2c_adapter* i2c)
-{
- printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
- return NULL;
-}
-#endif // CONFIG_DVB_SP8870
-
-#endif // SP8870_H
Powered by cgit, Gruvboxed by Blaster4385.