diff options
Diffstat (limited to 'drivers/md')
-rw-r--r-- | drivers/md/Kconfig | 6 | ||||
-rw-r--r-- | drivers/md/Makefile | 1 | ||||
-rw-r--r-- | drivers/md/bitmap.h | 2 | ||||
-rw-r--r-- | drivers/md/dm-crypt.c | 19 | ||||
-rw-r--r-- | drivers/md/dm-flakey.c | 212 | ||||
-rw-r--r-- | drivers/md/dm-ioctl.c | 46 | ||||
-rw-r--r-- | drivers/md/dm-log.c | 2 | ||||
-rw-r--r-- | drivers/md/dm-mpath.c | 17 | ||||
-rw-r--r-- | drivers/md/dm-region-hash.c | 2 | ||||
-rw-r--r-- | drivers/md/dm-snap.c | 2 | ||||
-rw-r--r-- | drivers/md/dm-stripe.c | 23 | ||||
-rw-r--r-- | drivers/md/dm-table.c | 114 | ||||
-rw-r--r-- | drivers/md/faulty.c | 2 | ||||
-rw-r--r-- | drivers/md/md.c | 10 | ||||
-rw-r--r-- | drivers/md/md.h | 2 | ||||
-rw-r--r-- | drivers/md/raid10.c | 6 | ||||
-rw-r--r-- | drivers/md/raid10.h | 4 |
17 files changed, 392 insertions, 78 deletions
diff --git a/drivers/md/Kconfig b/drivers/md/Kconfig index 98d9ec85e0eb..8420129fc5ee 100644 --- a/drivers/md/Kconfig +++ b/drivers/md/Kconfig @@ -327,4 +327,10 @@ config DM_UEVENT ---help--- Generate udev events for DM events. +config DM_FLAKEY + tristate "Flakey target (EXPERIMENTAL)" + depends on BLK_DEV_DM && EXPERIMENTAL + ---help--- + A target that intermittently fails I/O for debugging purposes. + endif # MD diff --git a/drivers/md/Makefile b/drivers/md/Makefile index d0138606c2e8..448838b1f92a 100644 --- a/drivers/md/Makefile +++ b/drivers/md/Makefile @@ -29,6 +29,7 @@ obj-$(CONFIG_BLK_DEV_MD) += md-mod.o obj-$(CONFIG_BLK_DEV_DM) += dm-mod.o obj-$(CONFIG_DM_CRYPT) += dm-crypt.o obj-$(CONFIG_DM_DELAY) += dm-delay.o +obj-$(CONFIG_DM_FLAKEY) += dm-flakey.o obj-$(CONFIG_DM_MULTIPATH) += dm-multipath.o dm-round-robin.o obj-$(CONFIG_DM_MULTIPATH_QL) += dm-queue-length.o obj-$(CONFIG_DM_MULTIPATH_ST) += dm-service-time.o diff --git a/drivers/md/bitmap.h b/drivers/md/bitmap.h index 931a7a7c3796..d0aeaf46d932 100644 --- a/drivers/md/bitmap.h +++ b/drivers/md/bitmap.h @@ -45,7 +45,7 @@ * * The counter counts pending write requests, plus the on-disk bit. * When the counter is '1' and the resync bits are clear, the on-disk - * bit can be cleared aswell, thus setting the counter to 0. + * bit can be cleared as well, thus setting the counter to 0. * When we set a bit, or in the counter (to start a write), if the fields is * 0, we first set the disk bit and set the counter to 1. * diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c index 2c62c1169f78..c8827ffd85bb 100644 --- a/drivers/md/dm-crypt.c +++ b/drivers/md/dm-crypt.c @@ -1324,20 +1324,29 @@ static int crypt_setkey_allcpus(struct crypt_config *cc) static int crypt_set_key(struct crypt_config *cc, char *key) { + int r = -EINVAL; + int key_string_len = strlen(key); + /* The key size may not be changed. */ - if (cc->key_size != (strlen(key) >> 1)) - return -EINVAL; + if (cc->key_size != (key_string_len >> 1)) + goto out; /* Hyphen (which gives a key_size of zero) means there is no key. */ if (!cc->key_size && strcmp(key, "-")) - return -EINVAL; + goto out; if (cc->key_size && crypt_decode_key(cc->key, key, cc->key_size) < 0) - return -EINVAL; + goto out; set_bit(DM_CRYPT_KEY_VALID, &cc->flags); - return crypt_setkey_allcpus(cc); + r = crypt_setkey_allcpus(cc); + +out: + /* Hex key string not needed after here, so wipe it. */ + memset(key, '0', key_string_len); + + return r; } static int crypt_wipe_key(struct crypt_config *cc) diff --git a/drivers/md/dm-flakey.c b/drivers/md/dm-flakey.c new file mode 100644 index 000000000000..ea790623c30b --- /dev/null +++ b/drivers/md/dm-flakey.c @@ -0,0 +1,212 @@ +/* + * Copyright (C) 2003 Sistina Software (UK) Limited. + * Copyright (C) 2004, 2010 Red Hat, Inc. All rights reserved. + * + * This file is released under the GPL. + */ + +#include <linux/device-mapper.h> + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <linux/bio.h> +#include <linux/slab.h> + +#define DM_MSG_PREFIX "flakey" + +/* + * Flakey: Used for testing only, simulates intermittent, + * catastrophic device failure. + */ +struct flakey_c { + struct dm_dev *dev; + unsigned long start_time; + sector_t start; + unsigned up_interval; + unsigned down_interval; +}; + +/* + * Construct a flakey mapping: <dev_path> <offset> <up interval> <down interval> + */ +static int flakey_ctr(struct dm_target *ti, unsigned int argc, char **argv) +{ + struct flakey_c *fc; + unsigned long long tmp; + + if (argc != 4) { + ti->error = "dm-flakey: Invalid argument count"; + return -EINVAL; + } + + fc = kmalloc(sizeof(*fc), GFP_KERNEL); + if (!fc) { + ti->error = "dm-flakey: Cannot allocate linear context"; + return -ENOMEM; + } + fc->start_time = jiffies; + + if (sscanf(argv[1], "%llu", &tmp) != 1) { + ti->error = "dm-flakey: Invalid device sector"; + goto bad; + } + fc->start = tmp; + + if (sscanf(argv[2], "%u", &fc->up_interval) != 1) { + ti->error = "dm-flakey: Invalid up interval"; + goto bad; + } + + if (sscanf(argv[3], "%u", &fc->down_interval) != 1) { + ti->error = "dm-flakey: Invalid down interval"; + goto bad; + } + + if (!(fc->up_interval + fc->down_interval)) { + ti->error = "dm-flakey: Total (up + down) interval is zero"; + goto bad; + } + + if (fc->up_interval + fc->down_interval < fc->up_interval) { + ti->error = "dm-flakey: Interval overflow"; + goto bad; + } + + if (dm_get_device(ti, argv[0], dm_table_get_mode(ti->table), &fc->dev)) { + ti->error = "dm-flakey: Device lookup failed"; + goto bad; + } + + ti->num_flush_requests = 1; + ti->private = fc; + return 0; + +bad: + kfree(fc); + return -EINVAL; +} + +static void flakey_dtr(struct dm_target *ti) +{ + struct flakey_c *fc = ti->private; + + dm_put_device(ti, fc->dev); + kfree(fc); +} + +static sector_t flakey_map_sector(struct dm_target *ti, sector_t bi_sector) +{ + struct flakey_c *fc = ti->private; + + return fc->start + (bi_sector - ti->begin); +} + +static void flakey_map_bio(struct dm_target *ti, struct bio *bio) +{ + struct flakey_c *fc = ti->private; + + bio->bi_bdev = fc->dev->bdev; + if (bio_sectors(bio)) + bio->bi_sector = flakey_map_sector(ti, bio->bi_sector); +} + +static int flakey_map(struct dm_target *ti, struct bio *bio, + union map_info *map_context) +{ + struct flakey_c *fc = ti->private; + unsigned elapsed; + + /* Are we alive ? */ + elapsed = (jiffies - fc->start_time) / HZ; + if (elapsed % (fc->up_interval + fc->down_interval) >= fc->up_interval) + return -EIO; + + flakey_map_bio(ti, bio); + + return DM_MAPIO_REMAPPED; +} + +static int flakey_status(struct dm_target *ti, status_type_t type, + char *result, unsigned int maxlen) +{ + struct flakey_c *fc = ti->private; + + switch (type) { + case STATUSTYPE_INFO: + result[0] = '\0'; + break; + + case STATUSTYPE_TABLE: + snprintf(result, maxlen, "%s %llu %u %u", fc->dev->name, + (unsigned long long)fc->start, fc->up_interval, + fc->down_interval); + break; + } + return 0; +} + +static int flakey_ioctl(struct dm_target *ti, unsigned int cmd, unsigned long arg) +{ + struct flakey_c *fc = ti->private; + + return __blkdev_driver_ioctl(fc->dev->bdev, fc->dev->mode, cmd, arg); +} + +static int flakey_merge(struct dm_target *ti, struct bvec_merge_data *bvm, + struct bio_vec *biovec, int max_size) +{ + struct flakey_c *fc = ti->private; + struct request_queue *q = bdev_get_queue(fc->dev->bdev); + + if (!q->merge_bvec_fn) + return max_size; + + bvm->bi_bdev = fc->dev->bdev; + bvm->bi_sector = flakey_map_sector(ti, bvm->bi_sector); + + return min(max_size, q->merge_bvec_fn(q, bvm, biovec)); +} + +static int flakey_iterate_devices(struct dm_target *ti, iterate_devices_callout_fn fn, void *data) +{ + struct flakey_c *fc = ti->private; + + return fn(ti, fc->dev, fc->start, ti->len, data); +} + +static struct target_type flakey_target = { + .name = "flakey", + .version = {1, 1, 0}, + .module = THIS_MODULE, + .ctr = flakey_ctr, + .dtr = flakey_dtr, + .map = flakey_map, + .status = flakey_status, + .ioctl = flakey_ioctl, + .merge = flakey_merge, + .iterate_devices = flakey_iterate_devices, +}; + +static int __init dm_flakey_init(void) +{ + int r = dm_register_target(&flakey_target); + + if (r < 0) + DMERR("register failed %d", r); + + return r; +} + +static void __exit dm_flakey_exit(void) +{ + dm_unregister_target(&flakey_target); +} + +/* Module hooks */ +module_init(dm_flakey_init); +module_exit(dm_flakey_exit); + +MODULE_DESCRIPTION(DM_NAME " flakey target"); +MODULE_AUTHOR("Joe Thornber <[email protected]>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/md/dm-ioctl.c b/drivers/md/dm-ioctl.c index 6d12775a1061..4cacdad2270a 100644 --- a/drivers/md/dm-ioctl.c +++ b/drivers/md/dm-ioctl.c @@ -1501,14 +1501,10 @@ static int check_version(unsigned int cmd, struct dm_ioctl __user *user) return r; } -static void free_params(struct dm_ioctl *param) -{ - vfree(param); -} - static int copy_params(struct dm_ioctl __user *user, struct dm_ioctl **param) { struct dm_ioctl tmp, *dmi; + int secure_data; if (copy_from_user(&tmp, user, sizeof(tmp) - sizeof(tmp.data))) return -EFAULT; @@ -1516,17 +1512,30 @@ static int copy_params(struct dm_ioctl __user *user, struct dm_ioctl **param) if (tmp.data_size < (sizeof(tmp) - sizeof(tmp.data))) return -EINVAL; + secure_data = tmp.flags & DM_SECURE_DATA_FLAG; + dmi = vmalloc(tmp.data_size); - if (!dmi) + if (!dmi) { + if (secure_data && clear_user(user, tmp.data_size)) + return -EFAULT; return -ENOMEM; - - if (copy_from_user(dmi, user, tmp.data_size)) { - vfree(dmi); - return -EFAULT; } + if (copy_from_user(dmi, user, tmp.data_size)) + goto bad; + + /* Wipe the user buffer so we do not return it to userspace */ + if (secure_data && clear_user(user, tmp.data_size)) + goto bad; + *param = dmi; return 0; + +bad: + if (secure_data) + memset(dmi, 0, tmp.data_size); + vfree(dmi); + return -EFAULT; } static int validate_params(uint cmd, struct dm_ioctl *param) @@ -1534,6 +1543,7 @@ static int validate_params(uint cmd, struct dm_ioctl *param) /* Always clear this flag */ param->flags &= ~DM_BUFFER_FULL_FLAG; param->flags &= ~DM_UEVENT_GENERATED_FLAG; + param->flags &= ~DM_SECURE_DATA_FLAG; /* Ignores parameters */ if (cmd == DM_REMOVE_ALL_CMD || @@ -1561,10 +1571,11 @@ static int validate_params(uint cmd, struct dm_ioctl *param) static int ctl_ioctl(uint command, struct dm_ioctl __user *user) { int r = 0; + int wipe_buffer; unsigned int cmd; struct dm_ioctl *uninitialized_var(param); ioctl_fn fn = NULL; - size_t param_size; + size_t input_param_size; /* only root can play with this */ if (!capable(CAP_SYS_ADMIN)) @@ -1611,13 +1622,15 @@ static int ctl_ioctl(uint command, struct dm_ioctl __user *user) if (r) return r; + input_param_size = param->data_size; + wipe_buffer = param->flags & DM_SECURE_DATA_FLAG; + r = validate_params(cmd, param); if (r) goto out; - param_size = param->data_size; param->data_size = sizeof(*param); - r = fn(param, param_size); + r = fn(param, input_param_size); /* * Copy the results back to userland. @@ -1625,8 +1638,11 @@ static int ctl_ioctl(uint command, struct dm_ioctl __user *user) if (!r && copy_to_user(user, param, param->data_size)) r = -EFAULT; - out: - free_params(param); +out: + if (wipe_buffer) + memset(param, 0, input_param_size); + + vfree(param); return r; } diff --git a/drivers/md/dm-log.c b/drivers/md/dm-log.c index 57968eb382c1..a1f321889676 100644 --- a/drivers/md/dm-log.c +++ b/drivers/md/dm-log.c @@ -543,7 +543,7 @@ static int disk_ctr(struct dm_dirty_log *log, struct dm_target *ti, return -EINVAL; } - r = dm_get_device(ti, argv[0], FMODE_READ | FMODE_WRITE, &dev); + r = dm_get_device(ti, argv[0], dm_table_get_mode(ti->table), &dev); if (r) return r; diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c index 4b0b63c290a6..a550a057d991 100644 --- a/drivers/md/dm-mpath.c +++ b/drivers/md/dm-mpath.c @@ -844,8 +844,8 @@ static int multipath_ctr(struct dm_target *ti, unsigned int argc, { /* target parameters */ static struct param _params[] = { - {1, 1024, "invalid number of priority groups"}, - {1, 1024, "invalid initial priority group number"}, + {0, 1024, "invalid number of priority groups"}, + {0, 1024, "invalid initial priority group number"}, }; int r; @@ -879,6 +879,13 @@ static int multipath_ctr(struct dm_target *ti, unsigned int argc, if (r) goto bad; + if ((!m->nr_priority_groups && next_pg_num) || + (m->nr_priority_groups && !next_pg_num)) { + ti->error = "invalid initial priority group"; + r = -EINVAL; + goto bad; + } + /* parse the priority groups */ while (as.argc) { struct priority_group *pg; @@ -1065,7 +1072,7 @@ out: static int action_dev(struct multipath *m, struct dm_dev *dev, action_fn action) { - int r = 0; + int r = -EINVAL; struct pgpath *pgpath; struct priority_group *pg; @@ -1415,7 +1422,7 @@ static int multipath_status(struct dm_target *ti, status_type_t type, else if (m->current_pg) pg_num = m->current_pg->pg_num; else - pg_num = 1; + pg_num = (m->nr_priority_groups ? 1 : 0); DMEMIT("%u ", pg_num); @@ -1669,7 +1676,7 @@ out: *---------------------------------------------------------------*/ static struct target_type multipath_target = { .name = "multipath", - .version = {1, 2, 0}, + .version = {1, 3, 0}, .module = THIS_MODULE, .ctr = multipath_ctr, .dtr = multipath_dtr, diff --git a/drivers/md/dm-region-hash.c b/drivers/md/dm-region-hash.c index dad011aed0c9..7771ed212182 100644 --- a/drivers/md/dm-region-hash.c +++ b/drivers/md/dm-region-hash.c @@ -419,7 +419,7 @@ void dm_rh_mark_nosync(struct dm_region_hash *rh, struct bio *bio) /* * Possible cases: * 1) DM_RH_DIRTY - * 2) DM_RH_NOSYNC: was dirty, other preceeding writes failed + * 2) DM_RH_NOSYNC: was dirty, other preceding writes failed * 3) DM_RH_RECOVERING: flushing pending writes * Either case, the region should have not been connected to list. */ diff --git a/drivers/md/dm-snap.c b/drivers/md/dm-snap.c index fdde53cd12b7..a2d330942cb2 100644 --- a/drivers/md/dm-snap.c +++ b/drivers/md/dm-snap.c @@ -1080,7 +1080,7 @@ static int snapshot_ctr(struct dm_target *ti, unsigned int argc, char **argv) argv++; argc--; - r = dm_get_device(ti, cow_path, FMODE_READ | FMODE_WRITE, &s->cow); + r = dm_get_device(ti, cow_path, dm_table_get_mode(ti->table), &s->cow); if (r) { ti->error = "Cannot get COW device"; goto bad_cow; diff --git a/drivers/md/dm-stripe.c b/drivers/md/dm-stripe.c index dddfa14f2982..3d80cf0c152d 100644 --- a/drivers/md/dm-stripe.c +++ b/drivers/md/dm-stripe.c @@ -396,9 +396,29 @@ static void stripe_io_hints(struct dm_target *ti, blk_limits_io_opt(limits, chunk_size * sc->stripes); } +static int stripe_merge(struct dm_target *ti, struct bvec_merge_data *bvm, + struct bio_vec *biovec, int max_size) +{ + struct stripe_c *sc = ti->private; + sector_t bvm_sector = bvm->bi_sector; + uint32_t stripe; + struct request_queue *q; + + stripe_map_sector(sc, bvm_sector, &stripe, &bvm_sector); + + q = bdev_get_queue(sc->stripe[stripe].dev->bdev); + if (!q->merge_bvec_fn) + return max_size; + + bvm->bi_bdev = sc->stripe[stripe].dev->bdev; + bvm->bi_sector = sc->stripe[stripe].physical_start + bvm_sector; + + return min(max_size, q->merge_bvec_fn(q, bvm, biovec)); +} + static struct target_type stripe_target = { .name = "striped", - .version = {1, 3, 1}, + .version = {1, 4, 0}, .module = THIS_MODULE, .ctr = stripe_ctr, .dtr = stripe_dtr, @@ -407,6 +427,7 @@ static struct target_type stripe_target = { .status = stripe_status, .iterate_devices = stripe_iterate_devices, .io_hints = stripe_io_hints, + .merge = stripe_merge, }; int __init dm_stripe_init(void) diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c index 416d4e258df6..cb8380c9767f 100644 --- a/drivers/md/dm-table.c +++ b/drivers/md/dm-table.c @@ -927,20 +927,80 @@ static int dm_table_build_index(struct dm_table *t) } /* + * Get a disk whose integrity profile reflects the table's profile. + * If %match_all is true, all devices' profiles must match. + * If %match_all is false, all devices must at least have an + * allocated integrity profile; but uninitialized is ok. + * Returns NULL if integrity support was inconsistent or unavailable. + */ +static struct gendisk * dm_table_get_integrity_disk(struct dm_table *t, + bool match_all) +{ + struct list_head *devices = dm_table_get_devices(t); + struct dm_dev_internal *dd = NULL; + struct gendisk *prev_disk = NULL, *template_disk = NULL; + + list_for_each_entry(dd, devices, list) { + template_disk = dd->dm_dev.bdev->bd_disk; + if (!blk_get_integrity(template_disk)) + goto no_integrity; + if (!match_all && !blk_integrity_is_initialized(template_disk)) + continue; /* skip uninitialized profiles */ + else if (prev_disk && + blk_integrity_compare(prev_disk, template_disk) < 0) + goto no_integrity; + prev_disk = template_disk; + } + + return template_disk; + +no_integrity: + if (prev_disk) + DMWARN("%s: integrity not set: %s and %s profile mismatch", + dm_device_name(t->md), + prev_disk->disk_name, + template_disk->disk_name); + return NULL; +} + +/* * Register the mapped device for blk_integrity support if - * the underlying devices support it. + * the underlying devices have an integrity profile. But all devices + * may not have matching profiles (checking all devices isn't reliable + * during table load because this table may use other DM device(s) which + * must be resumed before they will have an initialized integity profile). + * Stacked DM devices force a 2 stage integrity profile validation: + * 1 - during load, validate all initialized integrity profiles match + * 2 - during resume, validate all integrity profiles match */ static int dm_table_prealloc_integrity(struct dm_table *t, struct mapped_device *md) { - struct list_head *devices = dm_table_get_devices(t); - struct dm_dev_internal *dd; + struct gendisk *template_disk = NULL; - list_for_each_entry(dd, devices, list) - if (bdev_get_integrity(dd->dm_dev.bdev)) { - t->integrity_supported = 1; - return blk_integrity_register(dm_disk(md), NULL); - } + template_disk = dm_table_get_integrity_disk(t, false); + if (!template_disk) + return 0; + if (!blk_integrity_is_initialized(dm_disk(md))) { + t->integrity_supported = 1; + return blk_integrity_register(dm_disk(md), NULL); + } + + /* + * If DM device already has an initalized integrity + * profile the new profile should not conflict. + */ + if (blk_integrity_is_initialized(template_disk) && + blk_integrity_compare(dm_disk(md), template_disk) < 0) { + DMWARN("%s: conflict with existing integrity profile: " + "%s profile mismatch", + dm_device_name(t->md), + template_disk->disk_name); + return 1; + } + + /* Preserve existing initialized integrity profile */ + t->integrity_supported = 1; return 0; } @@ -1094,41 +1154,27 @@ combine_limits: /* * Set the integrity profile for this device if all devices used have - * matching profiles. + * matching profiles. We're quite deep in the resume path but still + * don't know if all devices (particularly DM devices this device + * may be stacked on) have matching profiles. Even if the profiles + * don't match we have no way to fail (to resume) at this point. */ static void dm_table_set_integrity(struct dm_table *t) { - struct list_head *devices = dm_table_get_devices(t); - struct dm_dev_internal *prev = NULL, *dd = NULL; + struct gendisk *template_disk = NULL; if (!blk_get_integrity(dm_disk(t->md))) return; - list_for_each_entry(dd, devices, list) { - if (prev && - blk_integrity_compare(prev->dm_dev.bdev->bd_disk, - dd->dm_dev.bdev->bd_disk) < 0) { - DMWARN("%s: integrity not set: %s and %s mismatch", - dm_device_name(t->md), - prev->dm_dev.bdev->bd_disk->disk_name, - dd->dm_dev.bdev->bd_disk->disk_name); - goto no_integrity; - } - prev = dd; + template_disk = dm_table_get_integrity_disk(t, true); + if (!template_disk && + blk_integrity_is_initialized(dm_disk(t->md))) { + DMWARN("%s: device no longer has a valid integrity profile", + dm_device_name(t->md)); + return; } - - if (!prev || !bdev_get_integrity(prev->dm_dev.bdev)) - goto no_integrity; - blk_integrity_register(dm_disk(t->md), - bdev_get_integrity(prev->dm_dev.bdev)); - - return; - -no_integrity: - blk_integrity_register(dm_disk(t->md), NULL); - - return; + blk_get_integrity(template_disk)); } void dm_table_set_restrictions(struct dm_table *t, struct request_queue *q, diff --git a/drivers/md/faulty.c b/drivers/md/faulty.c index 339fdc670751..23078dabb6df 100644 --- a/drivers/md/faulty.c +++ b/drivers/md/faulty.c @@ -30,7 +30,7 @@ * * Different modes can be active at a time, but only * one can be set at array creation. Others can be added later. - * A mode can be one-shot or recurrent with the recurrance being + * A mode can be one-shot or recurrent with the recurrence being * once in every N requests. * The bottom 5 bits of the "layout" indicate the mode. The * remainder indicate a period, or 0 for one-shot. diff --git a/drivers/md/md.c b/drivers/md/md.c index 06ecea751a39..b12b3776c0c0 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -1777,12 +1777,6 @@ int md_integrity_register(mddev_t *mddev) continue; if (rdev->raid_disk < 0) continue; - /* - * If at least one rdev is not integrity capable, we can not - * enable data integrity for the md device. - */ - if (!bdev_get_integrity(rdev->bdev)) - return -EINVAL; if (!reference) { /* Use the first rdev as the reference */ reference = rdev; @@ -1793,6 +1787,8 @@ int md_integrity_register(mddev_t *mddev) rdev->bdev->bd_disk) < 0) return -EINVAL; } + if (!reference || !bdev_get_integrity(reference->bdev)) + return 0; /* * All component devices are integrity capable and have matching * profiles, register the common profile for the md device. @@ -6270,7 +6266,7 @@ static void status_resync(struct seq_file *seq, mddev_t * mddev) * rt is a sector_t, so could be 32bit or 64bit. * So we divide before multiply in case it is 32bit and close * to the limit. - * We scale the divisor (db) by 32 to avoid loosing precision + * We scale the divisor (db) by 32 to avoid losing precision * near the end of resync when the number of remaining sectors * is close to 'db'. * We then divide rt by 32 after multiplying by db to compensate. diff --git a/drivers/md/md.h b/drivers/md/md.h index 12215d437fcc..52b407369e13 100644 --- a/drivers/md/md.h +++ b/drivers/md/md.h @@ -94,7 +94,7 @@ struct mdk_rdev_s #define In_sync 2 /* device is in_sync with rest of array */ #define WriteMostly 4 /* Avoid reading if at all possible */ #define AutoDetected 7 /* added by auto-detect */ -#define Blocked 8 /* An error occured on an externally +#define Blocked 8 /* An error occurred on an externally * managed array, don't allow writes * until it is cleared */ wait_queue_head_t blocked_wait; diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index f7b62370b374..2da83d566592 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -5,7 +5,7 @@ * * RAID-10 support for md. * - * Base on code in raid1.c. See raid1.c for futher copyright information. + * Base on code in raid1.c. See raid1.c for further copyright information. * * * This program is free software; you can redistribute it and/or modify @@ -340,14 +340,14 @@ static void raid10_end_write_request(struct bio *bio, int error) /* * RAID10 layout manager - * Aswell as the chunksize and raid_disks count, there are two + * As well as the chunksize and raid_disks count, there are two * parameters: near_copies and far_copies. * near_copies * far_copies must be <= raid_disks. * Normally one of these will be 1. * If both are 1, we get raid0. * If near_copies == raid_disks, we get raid1. * - * Chunks are layed out in raid0 style with near_copies copies of the + * Chunks are laid out in raid0 style with near_copies copies of the * first chunk, followed by near_copies copies of the next chunk and * so on. * If far_copies > 1, then after 1/far_copies of the array has been assigned diff --git a/drivers/md/raid10.h b/drivers/md/raid10.h index 2316ac2e8e21..944b1104d3b4 100644 --- a/drivers/md/raid10.h +++ b/drivers/md/raid10.h @@ -17,8 +17,8 @@ struct r10_private_data_s { spinlock_t device_lock; /* geometry */ - int near_copies; /* number of copies layed out raid0 style */ - int far_copies; /* number of copies layed out + int near_copies; /* number of copies laid out raid0 style */ + int far_copies; /* number of copies laid out * at large strides across drives */ int far_offset; /* far_copies are offset by 1 stripe |