diff options
Diffstat (limited to 'drivers/input')
| -rw-r--r-- | drivers/input/joystick/adc-joystick.c | 7 | ||||
| -rw-r--r-- | drivers/input/misc/uinput.c | 14 | ||||
| -rw-r--r-- | drivers/input/mouse/cypress_ps2.c | 58 | ||||
| -rw-r--r-- | drivers/input/mouse/synaptics.c | 1 | ||||
| -rw-r--r-- | drivers/input/serio/i8042-acpipnpio.h | 29 | ||||
| -rw-r--r-- | drivers/input/serio/i8042.c | 10 | ||||
| -rw-r--r-- | drivers/input/touchscreen/ads7846.c | 2 | ||||
| -rw-r--r-- | drivers/input/touchscreen/edt-ft5x06.c | 6 | ||||
| -rw-r--r-- | drivers/input/touchscreen/himax_hx83112b.c | 14 |
9 files changed, 66 insertions, 75 deletions
diff --git a/drivers/input/joystick/adc-joystick.c b/drivers/input/joystick/adc-joystick.c index 5f46a7104b52..de1fa4cf291b 100644 --- a/drivers/input/joystick/adc-joystick.c +++ b/drivers/input/joystick/adc-joystick.c @@ -182,8 +182,11 @@ static int adc_joystick_set_axes(struct device *dev, struct adc_joystick *joy) swap(range[0], range[1]); } - fwnode_property_read_u32(child, "abs-fuzz", &fuzz); - fwnode_property_read_u32(child, "abs-flat", &flat); + if (fwnode_property_read_u32(child, "abs-fuzz", &fuzz)) + fuzz = 0; + + if (fwnode_property_read_u32(child, "abs-flat", &flat)) + flat = 0; input_set_abs_params(joy->input, axes[i].code, range[0], range[1], fuzz, flat); diff --git a/drivers/input/misc/uinput.c b/drivers/input/misc/uinput.c index d23f3225b00f..445856c9127a 100644 --- a/drivers/input/misc/uinput.c +++ b/drivers/input/misc/uinput.c @@ -417,6 +417,20 @@ static int uinput_validate_absinfo(struct input_dev *dev, unsigned int code, return -EINVAL; } + /* + * Limit number of contacts to a reasonable value (100). This + * ensures that we need less than 2 pages for struct input_mt + * (we are not using in-kernel slot assignment so not going to + * allocate memory for the "red" table), and we should have no + * trouble getting this much memory. + */ + if (code == ABS_MT_SLOT && max > 99) { + printk(KERN_DEBUG + "%s: unreasonably large number of slots requested: %d\n", + UINPUT_NAME, max); + return -EINVAL; + } + return 0; } diff --git a/drivers/input/mouse/cypress_ps2.c b/drivers/input/mouse/cypress_ps2.c index b3c34ebcc4ef..9446657a5f35 100644 --- a/drivers/input/mouse/cypress_ps2.c +++ b/drivers/input/mouse/cypress_ps2.c @@ -91,48 +91,6 @@ static int cypress_ps2_ext_cmd(struct psmouse *psmouse, u8 prefix, u8 nibble) return rc; } -static int cypress_ps2_read_cmd_status(struct psmouse *psmouse, - u8 cmd, u8 *param) -{ - struct ps2dev *ps2dev = &psmouse->ps2dev; - enum psmouse_state old_state; - int pktsize; - int rc; - - ps2_begin_command(ps2dev); - - old_state = psmouse->state; - psmouse->state = PSMOUSE_CMD_MODE; - psmouse->pktcnt = 0; - - pktsize = (cmd == CYTP_CMD_READ_TP_METRICS) ? 8 : 3; - memset(param, 0, pktsize); - - rc = cypress_ps2_sendbyte(psmouse, PSMOUSE_CMD_GETINFO & 0xff); - if (rc) - goto out; - - if (!wait_event_timeout(ps2dev->wait, - psmouse->pktcnt >= pktsize, - msecs_to_jiffies(CYTP_CMD_TIMEOUT))) { - rc = -ETIMEDOUT; - goto out; - } - - memcpy(param, psmouse->packet, pktsize); - - psmouse_dbg(psmouse, "Command 0x%02x response data (0x): %*ph\n", - cmd, pktsize, param); - -out: - psmouse->state = old_state; - psmouse->pktcnt = 0; - - ps2_end_command(ps2dev); - - return rc; -} - static bool cypress_verify_cmd_state(struct psmouse *psmouse, u8 cmd, u8* param) { bool rate_match = false; @@ -166,6 +124,8 @@ static bool cypress_verify_cmd_state(struct psmouse *psmouse, u8 cmd, u8* param) static int cypress_send_ext_cmd(struct psmouse *psmouse, u8 cmd, u8 *param) { u8 cmd_prefix = PSMOUSE_CMD_SETRES & 0xff; + unsigned int resp_size = cmd == CYTP_CMD_READ_TP_METRICS ? 8 : 3; + unsigned int ps2_cmd = (PSMOUSE_CMD_GETINFO & 0xff) | (resp_size << 8); int tries = CYTP_PS2_CMD_TRIES; int error; @@ -179,10 +139,18 @@ static int cypress_send_ext_cmd(struct psmouse *psmouse, u8 cmd, u8 *param) cypress_ps2_ext_cmd(psmouse, cmd_prefix, DECODE_CMD_BB(cmd)); cypress_ps2_ext_cmd(psmouse, cmd_prefix, DECODE_CMD_AA(cmd)); - error = cypress_ps2_read_cmd_status(psmouse, cmd, param); - if (!error && cypress_verify_cmd_state(psmouse, cmd, param)) - return 0; + error = ps2_command(&psmouse->ps2dev, param, ps2_cmd); + if (error) { + psmouse_dbg(psmouse, "Command 0x%02x failed: %d\n", + cmd, error); + } else { + psmouse_dbg(psmouse, + "Command 0x%02x response data (0x): %*ph\n", + cmd, resp_size, param); + if (cypress_verify_cmd_state(psmouse, cmd, param)) + return 0; + } } while (--tries > 0); return -EIO; diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index 38191c3b31bf..380aa1614442 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -189,6 +189,7 @@ static const char * const smbus_pnp_ids[] = { "LEN2054", /* E480 */ "LEN2055", /* E580 */ "LEN2068", /* T14 Gen 1 */ + "SYN3015", /* HP EliteBook 840 G2 */ "SYN3052", /* HP EliteBook 840 G4 */ "SYN3221", /* HP 15-ay000 */ "SYN323d", /* HP Spectre X360 13-w013dx */ diff --git a/drivers/input/serio/i8042-acpipnpio.h b/drivers/input/serio/i8042-acpipnpio.h index 5b50475ec414..bad238f69a7a 100644 --- a/drivers/input/serio/i8042-acpipnpio.h +++ b/drivers/input/serio/i8042-acpipnpio.h @@ -83,6 +83,7 @@ static inline void i8042_write_command(int val) #define SERIO_QUIRK_KBDRESET BIT(12) #define SERIO_QUIRK_DRITEK BIT(13) #define SERIO_QUIRK_NOPNP BIT(14) +#define SERIO_QUIRK_FORCENORESTORE BIT(15) /* Quirk table for different mainboards. Options similar or identical to i8042 * module parameters. @@ -627,6 +628,15 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = { .driver_data = (void *)(SERIO_QUIRK_NOMUX) }, { + /* Fujitsu Lifebook E756 */ + /* https://bugzilla.suse.com/show_bug.cgi?id=1229056 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"), + DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E756"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX) + }, + { /* Fujitsu Lifebook E5411 */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU CLIENT COMPUTING LIMITED"), @@ -1149,18 +1159,10 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = { SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) }, { - /* - * Setting SERIO_QUIRK_NOMUX or SERIO_QUIRK_RESET_ALWAYS makes - * the keyboard very laggy for ~5 seconds after boot and - * sometimes also after resume. - * However both are required for the keyboard to not fail - * completely sometimes after boot or resume. - */ .matches = { DMI_MATCH(DMI_BOARD_NAME, "N150CU"), }, - .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS | - SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) + .driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE) }, { .matches = { @@ -1685,6 +1687,8 @@ static void __init i8042_check_quirks(void) if (quirks & SERIO_QUIRK_NOPNP) i8042_nopnp = true; #endif + if (quirks & SERIO_QUIRK_FORCENORESTORE) + i8042_forcenorestore = true; } #else static inline void i8042_check_quirks(void) {} @@ -1718,7 +1722,7 @@ static int __init i8042_platform_init(void) i8042_check_quirks(); - pr_debug("Active quirks (empty means none):%s%s%s%s%s%s%s%s%s%s%s%s%s\n", + pr_debug("Active quirks (empty means none):%s%s%s%s%s%s%s%s%s%s%s%s%s%s\n", i8042_nokbd ? " nokbd" : "", i8042_noaux ? " noaux" : "", i8042_nomux ? " nomux" : "", @@ -1738,10 +1742,11 @@ static int __init i8042_platform_init(void) "", #endif #ifdef CONFIG_PNP - i8042_nopnp ? " nopnp" : ""); + i8042_nopnp ? " nopnp" : "", #else - ""); + "", #endif + i8042_forcenorestore ? " forcenorestore" : ""); retval = i8042_pnp_init(); if (retval) diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c index e0fb1db653b7..8ec4872b4471 100644 --- a/drivers/input/serio/i8042.c +++ b/drivers/input/serio/i8042.c @@ -115,6 +115,10 @@ module_param_named(nopnp, i8042_nopnp, bool, 0); MODULE_PARM_DESC(nopnp, "Do not use PNP to detect controller settings"); #endif +static bool i8042_forcenorestore; +module_param_named(forcenorestore, i8042_forcenorestore, bool, 0); +MODULE_PARM_DESC(forcenorestore, "Force no restore on s3 resume, copying s2idle behaviour"); + #define DEBUG #ifdef DEBUG static bool i8042_debug; @@ -1232,7 +1236,7 @@ static int i8042_pm_suspend(struct device *dev) { int i; - if (pm_suspend_via_firmware()) + if (!i8042_forcenorestore && pm_suspend_via_firmware()) i8042_controller_reset(true); /* Set up serio interrupts for system wakeup. */ @@ -1248,7 +1252,7 @@ static int i8042_pm_suspend(struct device *dev) static int i8042_pm_resume_noirq(struct device *dev) { - if (!pm_resume_via_firmware()) + if (i8042_forcenorestore || !pm_resume_via_firmware()) i8042_interrupt(0, NULL); return 0; @@ -1271,7 +1275,7 @@ static int i8042_pm_resume(struct device *dev) * not restore the controller state to whatever it had been at boot * time, so we do not need to do anything. */ - if (!pm_suspend_via_firmware()) + if (i8042_forcenorestore || !pm_suspend_via_firmware()) return 0; /* diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c index 4247283c7271..f89c0dd15d8b 100644 --- a/drivers/input/touchscreen/ads7846.c +++ b/drivers/input/touchscreen/ads7846.c @@ -824,7 +824,7 @@ static void ads7846_read_state(struct ads7846 *ts) m = &ts->msg[msg_idx]; error = spi_sync(ts->spi, m); if (error) { - dev_err(&ts->spi->dev, "spi_sync --> %d\n", error); + dev_err_ratelimited(&ts->spi->dev, "spi_sync --> %d\n", error); packet->ignore = true; return; } diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c index 42f99e57fbb7..e70415f189a5 100644 --- a/drivers/input/touchscreen/edt-ft5x06.c +++ b/drivers/input/touchscreen/edt-ft5x06.c @@ -1474,6 +1474,10 @@ static const struct edt_i2c_chip_data edt_ft6236_data = { .max_support_points = 2, }; +static const struct edt_i2c_chip_data edt_ft8201_data = { + .max_support_points = 10, +}; + static const struct edt_i2c_chip_data edt_ft8719_data = { .max_support_points = 10, }; @@ -1485,6 +1489,7 @@ static const struct i2c_device_id edt_ft5x06_ts_id[] = { { .name = "ft5452", .driver_data = (long)&edt_ft5452_data }, /* Note no edt- prefix for compatibility with the ft6236.c driver */ { .name = "ft6236", .driver_data = (long)&edt_ft6236_data }, + { .name = "ft8201", .driver_data = (long)&edt_ft8201_data }, { .name = "ft8719", .driver_data = (long)&edt_ft8719_data }, { /* sentinel */ } }; @@ -1500,6 +1505,7 @@ static const struct of_device_id edt_ft5x06_of_match[] = { { .compatible = "focaltech,ft5452", .data = &edt_ft5452_data }, /* Note focaltech vendor prefix for compatibility with ft6236.c */ { .compatible = "focaltech,ft6236", .data = &edt_ft6236_data }, + { .compatible = "focaltech,ft8201", .data = &edt_ft8201_data }, { .compatible = "focaltech,ft8719", .data = &edt_ft8719_data }, { /* sentinel */ } }; diff --git a/drivers/input/touchscreen/himax_hx83112b.c b/drivers/input/touchscreen/himax_hx83112b.c index 9ed3bccde4ac..896a145ddb2b 100644 --- a/drivers/input/touchscreen/himax_hx83112b.c +++ b/drivers/input/touchscreen/himax_hx83112b.c @@ -130,17 +130,6 @@ static int himax_bus_read(struct himax_ts_data *ts, u32 address, void *dst, return 0; } -static int himax_read_mcu(struct himax_ts_data *ts, u32 address, u32 *dst) -{ - int error; - - error = himax_bus_read(ts, address, dst, sizeof(dst)); - if (error) - return error; - - return 0; -} - static void himax_reset(struct himax_ts_data *ts) { gpiod_set_value_cansleep(ts->gpiod_rst, 1); @@ -160,7 +149,8 @@ static int himax_read_product_id(struct himax_ts_data *ts, u32 *product_id) { int error; - error = himax_read_mcu(ts, HIMAX_REG_ADDR_ICID, product_id); + error = himax_bus_read(ts, HIMAX_REG_ADDR_ICID, product_id, + sizeof(*product_id)); if (error) return error; |