diff options
Diffstat (limited to 'drivers/input/touchscreen/goodix.c')
| -rw-r--r-- | drivers/input/touchscreen/goodix.c | 161 |
1 files changed, 140 insertions, 21 deletions
diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c index aaa3c455e01e..752e8ba4fecb 100644 --- a/drivers/input/touchscreen/goodix.c +++ b/drivers/input/touchscreen/goodix.c @@ -18,6 +18,7 @@ #include <linux/delay.h> #include <linux/irq.h> #include <linux/interrupt.h> +#include <linux/platform_data/x86/soc.h> #include <linux/slab.h> #include <linux/acpi.h> #include <linux/of.h> @@ -297,6 +298,108 @@ static int goodix_ts_read_input_report(struct goodix_ts_data *ts, u8 *data) return -ENOMSG; } +static struct input_dev *goodix_create_pen_input(struct goodix_ts_data *ts) +{ + struct device *dev = &ts->client->dev; + struct input_dev *input; + + input = devm_input_allocate_device(dev); + if (!input) + return NULL; + + input_alloc_absinfo(input); + if (!input->absinfo) { + input_free_device(input); + return NULL; + } + + input->absinfo[ABS_X] = ts->input_dev->absinfo[ABS_MT_POSITION_X]; + input->absinfo[ABS_Y] = ts->input_dev->absinfo[ABS_MT_POSITION_Y]; + __set_bit(ABS_X, input->absbit); + __set_bit(ABS_Y, input->absbit); + input_set_abs_params(input, ABS_PRESSURE, 0, 255, 0, 0); + + input_set_capability(input, EV_KEY, BTN_TOUCH); + input_set_capability(input, EV_KEY, BTN_TOOL_PEN); + input_set_capability(input, EV_KEY, BTN_STYLUS); + input_set_capability(input, EV_KEY, BTN_STYLUS2); + __set_bit(INPUT_PROP_DIRECT, input->propbit); + /* + * The resolution of these touchscreens is about 10 units/mm, the actual + * resolution does not matter much since we set INPUT_PROP_DIRECT. + * Userspace wants something here though, so just set it to 10 units/mm. + */ + input_abs_set_res(input, ABS_X, 10); + input_abs_set_res(input, ABS_Y, 10); + + input->name = "Goodix Active Pen"; + input->phys = "input/pen"; + input->id.bustype = BUS_I2C; + input->id.vendor = 0x0416; + if (kstrtou16(ts->id, 10, &input->id.product)) + input->id.product = 0x1001; + input->id.version = ts->version; + + if (input_register_device(input) != 0) { + input_free_device(input); + return NULL; + } + + return input; +} + +static void goodix_ts_report_pen_down(struct goodix_ts_data *ts, u8 *data) +{ + int input_x, input_y, input_w; + u8 key_value; + + if (!ts->input_pen) { + ts->input_pen = goodix_create_pen_input(ts); + if (!ts->input_pen) + return; + } + + if (ts->contact_size == 9) { + input_x = get_unaligned_le16(&data[4]); + input_y = get_unaligned_le16(&data[6]); + input_w = get_unaligned_le16(&data[8]); + } else { + input_x = get_unaligned_le16(&data[2]); + input_y = get_unaligned_le16(&data[4]); + input_w = get_unaligned_le16(&data[6]); + } + + touchscreen_report_pos(ts->input_pen, &ts->prop, input_x, input_y, false); + input_report_abs(ts->input_pen, ABS_PRESSURE, input_w); + + input_report_key(ts->input_pen, BTN_TOUCH, 1); + input_report_key(ts->input_pen, BTN_TOOL_PEN, 1); + + if (data[0] & GOODIX_HAVE_KEY) { + key_value = data[1 + ts->contact_size]; + input_report_key(ts->input_pen, BTN_STYLUS, key_value & 0x10); + input_report_key(ts->input_pen, BTN_STYLUS2, key_value & 0x20); + } else { + input_report_key(ts->input_pen, BTN_STYLUS, 0); + input_report_key(ts->input_pen, BTN_STYLUS2, 0); + } + + input_sync(ts->input_pen); +} + +static void goodix_ts_report_pen_up(struct goodix_ts_data *ts) +{ + if (!ts->input_pen) + return; + + input_report_key(ts->input_pen, BTN_TOUCH, 0); + input_report_key(ts->input_pen, BTN_TOOL_PEN, 0); + input_report_key(ts->input_pen, BTN_STYLUS, 0); + input_report_key(ts->input_pen, BTN_STYLUS2, 0); + + input_sync(ts->input_pen); +} + static void goodix_ts_report_touch_8b(struct goodix_ts_data *ts, u8 *coor_data) { int id = coor_data[0] & 0x0F; @@ -327,6 +430,14 @@ static void goodix_ts_report_touch_9b(struct goodix_ts_data *ts, u8 *coor_data) input_report_abs(ts->input_dev, ABS_MT_WIDTH_MAJOR, input_w); } +static void goodix_ts_release_keys(struct goodix_ts_data *ts) +{ + int i; + + for (i = 0; i < GOODIX_MAX_KEYS; i++) + input_report_key(ts->input_dev, ts->keymap[i], 0); +} + static void goodix_ts_report_key(struct goodix_ts_data *ts, u8 *data) { int touch_num; @@ -341,8 +452,7 @@ static void goodix_ts_report_key(struct goodix_ts_data *ts, u8 *data) input_report_key(ts->input_dev, ts->keymap[i], 1); } else { - for (i = 0; i < GOODIX_MAX_KEYS; i++) - input_report_key(ts->input_dev, ts->keymap[i], 0); + goodix_ts_release_keys(ts); } } @@ -364,6 +474,15 @@ static void goodix_process_events(struct goodix_ts_data *ts) if (touch_num < 0) return; + /* The pen being down is always reported as a single touch */ + if (touch_num == 1 && (point_data[1] & 0x80)) { + goodix_ts_report_pen_down(ts, point_data); + goodix_ts_release_keys(ts); + goto sync; /* Release any previously registered touches */ + } else { + goodix_ts_report_pen_up(ts); + } + goodix_ts_report_key(ts, point_data); for (i = 0; i < touch_num; i++) @@ -374,6 +493,7 @@ static void goodix_process_events(struct goodix_ts_data *ts) goodix_ts_report_touch_8b(ts, &point_data[1 + ts->contact_size * i]); +sync: input_mt_sync_frame(ts->input_dev); input_sync(ts->input_dev); } @@ -686,21 +806,6 @@ static int goodix_reset(struct goodix_ts_data *ts) } #ifdef ACPI_GPIO_SUPPORT -#include <asm/cpu_device_id.h> -#include <asm/intel-family.h> - -static const struct x86_cpu_id baytrail_cpu_ids[] = { - { X86_VENDOR_INTEL, 6, INTEL_FAM6_ATOM_SILVERMONT, X86_FEATURE_ANY, }, - {} -}; - -static inline bool is_byt(void) -{ - const struct x86_cpu_id *id = x86_match_cpu(baytrail_cpu_ids); - - return !!id; -} - static const struct acpi_gpio_params first_gpio = { 0, 0, false }; static const struct acpi_gpio_params second_gpio = { 1, 0, false }; @@ -759,7 +864,7 @@ static int goodix_add_acpi_gpio_mappings(struct goodix_ts_data *ts) const struct acpi_gpio_mapping *gpio_mapping = NULL; struct device *dev = &ts->client->dev; LIST_HEAD(resources); - int ret; + int irq, ret; ts->gpio_count = 0; ts->gpio_int_idx = -1; @@ -772,6 +877,20 @@ static int goodix_add_acpi_gpio_mappings(struct goodix_ts_data *ts) acpi_dev_free_resource_list(&resources); + /* + * CHT devices should have a GpioInt + a regular GPIO ACPI resource. + * Some CHT devices have a bug (where the also is bogus Interrupt + * resource copied from a previous BYT based generation). i2c-core-acpi + * will use the non-working Interrupt resource, fix this up. + */ + if (soc_intel_is_cht() && ts->gpio_count == 2 && ts->gpio_int_idx != -1) { + irq = acpi_dev_gpio_irq_get(ACPI_COMPANION(dev), 0); + if (irq > 0 && irq != ts->client->irq) { + dev_warn(dev, "Overriding IRQ %d -> %d\n", ts->client->irq, irq); + ts->client->irq = irq; + } + } + if (ts->gpio_count == 2 && ts->gpio_int_idx == 0) { ts->irq_pin_access_method = IRQ_PIN_ACCESS_ACPI_GPIO; gpio_mapping = acpi_goodix_int_first_gpios; @@ -784,7 +903,7 @@ static int goodix_add_acpi_gpio_mappings(struct goodix_ts_data *ts) dev_info(dev, "Using ACPI INTI and INTO methods for IRQ pin access\n"); ts->irq_pin_access_method = IRQ_PIN_ACCESS_ACPI_METHOD; gpio_mapping = acpi_goodix_reset_only_gpios; - } else if (is_byt() && ts->gpio_count == 2 && ts->gpio_int_idx == -1) { + } else if (soc_intel_is_byt() && ts->gpio_count == 2 && ts->gpio_int_idx == -1) { dev_info(dev, "No ACPI GpioInt resource, assuming that the GPIO order is reset, int\n"); ts->irq_pin_access_method = IRQ_PIN_ACCESS_ACPI_GPIO; gpio_mapping = acpi_goodix_int_last_gpios; @@ -857,7 +976,7 @@ retry_get_irq_gpio: if (IS_ERR(gpiod)) { error = PTR_ERR(gpiod); if (error != -EPROBE_DEFER) - dev_dbg(dev, "Failed to get %s GPIO: %d\n", + dev_err(dev, "Failed to get %s GPIO: %d\n", GOODIX_GPIO_INT_NAME, error); return error; } @@ -874,7 +993,7 @@ retry_get_irq_gpio: if (IS_ERR(gpiod)) { error = PTR_ERR(gpiod); if (error != -EPROBE_DEFER) - dev_dbg(dev, "Failed to get %s GPIO: %d\n", + dev_err(dev, "Failed to get %s GPIO: %d\n", GOODIX_GPIO_RST_NAME, error); return error; } |