diff options
Diffstat (limited to 'drivers/input/misc')
| -rw-r--r-- | drivers/input/misc/Kconfig | 23 | ||||
| -rw-r--r-- | drivers/input/misc/Makefile | 2 | ||||
| -rw-r--r-- | drivers/input/misc/apanel.c | 2 | ||||
| -rw-r--r-- | drivers/input/misc/atmel_captouch.c | 290 | ||||
| -rw-r--r-- | drivers/input/misc/hisi_powerkey.c | 142 | ||||
| -rw-r--r-- | drivers/input/misc/pwm-beeper.c | 69 | ||||
| -rw-r--r-- | drivers/input/misc/regulator-haptic.c | 2 | ||||
| -rw-r--r-- | drivers/input/misc/uinput.c | 6 | ||||
| -rw-r--r-- | drivers/input/misc/xen-kbdfront.c | 8 |
9 files changed, 517 insertions, 27 deletions
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 1f2337abcf2f..efb0ca871327 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -82,6 +82,20 @@ config INPUT_ARIZONA_HAPTICS To compile this driver as a module, choose M here: the module will be called arizona-haptics. +config INPUT_ATMEL_CAPTOUCH + tristate "Atmel Capacitive Touch Button Driver" + depends on OF || COMPILE_TEST + depends on I2C + help + Say Y here if an Atmel Capacitive Touch Button device which + implements "captouch" protocol is connected to I2C bus. Typically + this device consists of Atmel Touch sensor controlled by AtMegaXX + MCU running firmware based on Qtouch library. + One should find "atmel,captouch" node in the board specific DTS. + + To compile this driver as a module, choose M here: the + module will be called atmel_captouch. + config INPUT_BMA150 tristate "BMA150/SMB380 acceleration sensor support" depends on I2C @@ -796,4 +810,13 @@ config INPUT_DRV2667_HAPTICS To compile this driver as a module, choose M here: the module will be called drv2667-haptics. +config INPUT_HISI_POWERKEY + tristate "Hisilicon PMIC ONKEY support" + depends on ARCH_HISI || COMPILE_TEST + help + Say Y to enable support for PMIC ONKEY. + + To compile this driver as a module, choose M here: the + module will be called hisi_powerkey. + endif diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index 0357a088c6a9..6a1e5e20fc1c 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_INPUT_APANEL) += apanel.o obj-$(CONFIG_INPUT_ARIZONA_HAPTICS) += arizona-haptics.o obj-$(CONFIG_INPUT_ATI_REMOTE2) += ati_remote2.o obj-$(CONFIG_INPUT_ATLAS_BTNS) += atlas_btns.o +obj-$(CONFIG_INPUT_ATMEL_CAPTOUCH) += atmel_captouch.o obj-$(CONFIG_INPUT_BFIN_ROTARY) += bfin_rotary.o obj-$(CONFIG_INPUT_BMA150) += bma150.o obj-$(CONFIG_INPUT_CM109) += cm109.o @@ -34,6 +35,7 @@ obj-$(CONFIG_INPUT_DRV2667_HAPTICS) += drv2667.o obj-$(CONFIG_INPUT_GP2A) += gp2ap002a00f.o obj-$(CONFIG_INPUT_GPIO_BEEPER) += gpio-beeper.o obj-$(CONFIG_INPUT_GPIO_TILT_POLLED) += gpio_tilt_polled.o +obj-$(CONFIG_INPUT_HISI_POWERKEY) += hisi_powerkey.o obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o obj-$(CONFIG_INPUT_IMS_PCU) += ims-pcu.o obj-$(CONFIG_INPUT_IXP4XX_BEEPER) += ixp4xx-beeper.o diff --git a/drivers/input/misc/apanel.c b/drivers/input/misc/apanel.c index a8d2b8db4e35..53630afab606 100644 --- a/drivers/input/misc/apanel.c +++ b/drivers/input/misc/apanel.c @@ -297,7 +297,7 @@ static int __init apanel_init(void) if (slave != i2c_addr) { pr_notice(APANEL ": only one SMBus slave " - "address supported, skiping device...\n"); + "address supported, skipping device...\n"); continue; } diff --git a/drivers/input/misc/atmel_captouch.c b/drivers/input/misc/atmel_captouch.c new file mode 100644 index 000000000000..941265415a89 --- /dev/null +++ b/drivers/input/misc/atmel_captouch.c @@ -0,0 +1,290 @@ +/* + * Atmel Atmegaxx Capacitive Touch Button Driver + * + * Copyright (C) 2016 Google, inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* + * It's irrelevant that the HW used to develop captouch driver is based + * on Atmega88PA part and uses QtouchADC parts for sensing touch. + * Calling this driver "captouch" is an arbitrary way to distinguish + * the protocol this driver supported by other atmel/qtouch drivers. + * + * Captouch driver supports a newer/different version of the I2C + * registers/commands than the qt1070.c driver. + * Don't let the similarity of the general driver structure fool you. + * + * For raw i2c access from userspace, use i2cset/i2cget + * to poke at /dev/i2c-N devices. + */ + +#include <linux/device.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/slab.h> + +/* Maximum number of buttons supported */ +#define MAX_NUM_OF_BUTTONS 8 + +/* Registers */ +#define REG_KEY1_THRESHOLD 0x02 +#define REG_KEY2_THRESHOLD 0x03 +#define REG_KEY3_THRESHOLD 0x04 +#define REG_KEY4_THRESHOLD 0x05 + +#define REG_KEY1_REF_H 0x20 +#define REG_KEY1_REF_L 0x21 +#define REG_KEY2_REF_H 0x22 +#define REG_KEY2_REF_L 0x23 +#define REG_KEY3_REF_H 0x24 +#define REG_KEY3_REF_L 0x25 +#define REG_KEY4_REF_H 0x26 +#define REG_KEY4_REF_L 0x27 + +#define REG_KEY1_DLT_H 0x30 +#define REG_KEY1_DLT_L 0x31 +#define REG_KEY2_DLT_H 0x32 +#define REG_KEY2_DLT_L 0x33 +#define REG_KEY3_DLT_H 0x34 +#define REG_KEY3_DLT_L 0x35 +#define REG_KEY4_DLT_H 0x36 +#define REG_KEY4_DLT_L 0x37 + +#define REG_KEY_STATE 0x3C + +/* + * @i2c_client: I2C slave device client pointer + * @input: Input device pointer + * @num_btn: Number of buttons + * @keycodes: map of button# to KeyCode + * @prev_btn: Previous key state to detect button "press" or "release" + * @xfer_buf: I2C transfer buffer + */ +struct atmel_captouch_device { + struct i2c_client *client; + struct input_dev *input; + u32 num_btn; + u32 keycodes[MAX_NUM_OF_BUTTONS]; + u8 prev_btn; + u8 xfer_buf[8] ____cacheline_aligned; +}; + +/* + * Read from I2C slave device + * The protocol is that the client has to provide both the register address + * and the length, and while reading back the device would prepend the data + * with address and length for verification. + */ +static int atmel_read(struct atmel_captouch_device *capdev, + u8 reg, u8 *data, size_t len) +{ + struct i2c_client *client = capdev->client; + struct device *dev = &client->dev; + struct i2c_msg msg[2]; + int err; + + if (len > sizeof(capdev->xfer_buf) - 2) + return -EINVAL; + + capdev->xfer_buf[0] = reg; + capdev->xfer_buf[1] = len; + + msg[0].addr = client->addr; + msg[0].flags = 0; + msg[0].buf = capdev->xfer_buf; + msg[0].len = 2; + + msg[1].addr = client->addr; + msg[1].flags = I2C_M_RD; + msg[1].buf = capdev->xfer_buf; + msg[1].len = len + 2; + + err = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg)); + if (err != ARRAY_SIZE(msg)) + return err < 0 ? err : -EIO; + + if (capdev->xfer_buf[0] != reg) { + dev_err(dev, + "I2C read error: register address does not match (%#02x vs %02x)\n", + capdev->xfer_buf[0], reg); + return -ECOMM; + } + + memcpy(data, &capdev->xfer_buf[2], len); + + return 0; +} + +/* + * Handle interrupt and report the key changes to the input system. + * Multi-touch can be supported; however, it really depends on whether + * the device can multi-touch. + */ +static irqreturn_t atmel_captouch_isr(int irq, void *data) +{ + struct atmel_captouch_device *capdev = data; + struct device *dev = &capdev->client->dev; + int error; + int i; + u8 new_btn; + u8 changed_btn; + + error = atmel_read(capdev, REG_KEY_STATE, &new_btn, 1); + if (error) { + dev_err(dev, "failed to read button state: %d\n", error); + goto out; + } + + dev_dbg(dev, "%s: button state %#02x\n", __func__, new_btn); + + changed_btn = new_btn ^ capdev->prev_btn; + capdev->prev_btn = new_btn; + + for (i = 0; i < capdev->num_btn; i++) { + if (changed_btn & BIT(i)) + input_report_key(capdev->input, + capdev->keycodes[i], + new_btn & BIT(i)); + } + + input_sync(capdev->input); + +out: + return IRQ_HANDLED; +} + +/* + * Probe function to setup the device, input system and interrupt + */ +static int atmel_captouch_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct atmel_captouch_device *capdev; + struct device *dev = &client->dev; + struct device_node *node; + int i; + int err; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA | + I2C_FUNC_SMBUS_WORD_DATA | + I2C_FUNC_SMBUS_I2C_BLOCK)) { + dev_err(dev, "needed i2c functionality is not supported\n"); + return -EINVAL; + } + + capdev = devm_kzalloc(dev, sizeof(*capdev), GFP_KERNEL); + if (!capdev) + return -ENOMEM; + + capdev->client = client; + i2c_set_clientdata(client, capdev); + + err = atmel_read(capdev, REG_KEY_STATE, + &capdev->prev_btn, sizeof(capdev->prev_btn)); + if (err) { + dev_err(dev, "failed to read initial button state: %d\n", err); + return err; + } + + capdev->input = devm_input_allocate_device(dev); + if (!capdev->input) { + dev_err(dev, "failed to allocate input device\n"); + return -ENOMEM; + } + + capdev->input->id.bustype = BUS_I2C; + capdev->input->id.product = 0x880A; + capdev->input->id.version = 0; + capdev->input->name = "ATMegaXX Capacitive Button Controller"; + __set_bit(EV_KEY, capdev->input->evbit); + + node = dev->of_node; + if (!node) { + dev_err(dev, "failed to find matching node in device tree\n"); + return -EINVAL; + } + + if (of_property_read_bool(node, "autorepeat")) + __set_bit(EV_REP, capdev->input->evbit); + + capdev->num_btn = of_property_count_u32_elems(node, "linux,keymap"); + if (capdev->num_btn > MAX_NUM_OF_BUTTONS) + capdev->num_btn = MAX_NUM_OF_BUTTONS; + + err = of_property_read_u32_array(node, "linux,keycodes", + capdev->keycodes, + capdev->num_btn); + if (err) { + dev_err(dev, + "failed to read linux,keycode property: %d\n", err); + return err; + } + + for (i = 0; i < capdev->num_btn; i++) + __set_bit(capdev->keycodes[i], capdev->input->keybit); + + capdev->input->keycode = capdev->keycodes; + capdev->input->keycodesize = sizeof(capdev->keycodes[0]); + capdev->input->keycodemax = capdev->num_btn; + + err = input_register_device(capdev->input); + if (err) + return err; + + err = devm_request_threaded_irq(dev, client->irq, + NULL, atmel_captouch_isr, + IRQF_ONESHOT, + "atmel_captouch", capdev); + if (err) { + dev_err(dev, "failed to request irq %d: %d\n", + client->irq, err); + return err; + } + + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id atmel_captouch_of_id[] = { + { + .compatible = "atmel,captouch", + }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, atmel_captouch_of_id); +#endif + +static const struct i2c_device_id atmel_captouch_id[] = { + { "atmel_captouch", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, atmel_captouch_id); + +static struct i2c_driver atmel_captouch_driver = { + .probe = atmel_captouch_probe, + .id_table = atmel_captouch_id, + .driver = { + .name = "atmel_captouch", + .of_match_table = of_match_ptr(atmel_captouch_of_id), + }, +}; +module_i2c_driver(atmel_captouch_driver); + +/* Module information */ +MODULE_AUTHOR("Hung-yu Wu <hywu@google.com>"); +MODULE_DESCRIPTION("Atmel ATmegaXX Capacitance Touch Sensor I2C Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/input/misc/hisi_powerkey.c b/drivers/input/misc/hisi_powerkey.c new file mode 100644 index 000000000000..675539c529ce --- /dev/null +++ b/drivers/input/misc/hisi_powerkey.c @@ -0,0 +1,142 @@ +/* + * Hisilicon PMIC powerkey driver + * + * Copyright (C) 2013 Hisilicon Ltd. + * Copyright (C) 2015, 2016 Linaro Ltd. + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of this + * archive for more details. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/reboot.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of_irq.h> +#include <linux/input.h> +#include <linux/slab.h> + +/* the held interrupt will trigger after 4 seconds */ +#define MAX_HELD_TIME (4 * MSEC_PER_SEC) + +static irqreturn_t hi65xx_power_press_isr(int irq, void *q) +{ + struct input_dev *input = q; + + pm_wakeup_event(input->dev.parent, MAX_HELD_TIME); + input_report_key(input, KEY_POWER, 1); + input_sync(input); + + return IRQ_HANDLED; +} + +static irqreturn_t hi65xx_power_release_isr(int irq, void *q) +{ + struct input_dev *input = q; + + pm_wakeup_event(input->dev.parent, MAX_HELD_TIME); + input_report_key(input, KEY_POWER, 0); + input_sync(input); + + return IRQ_HANDLED; +} + +static irqreturn_t hi65xx_restart_toggle_isr(int irq, void *q) +{ + struct input_dev *input = q; + int value = test_bit(KEY_RESTART, input->key); + + pm_wakeup_event(input->dev.parent, MAX_HELD_TIME); + input_report_key(input, KEY_RESTART, !value); + input_sync(input); + + return IRQ_HANDLED; +} + +static const struct { + const char *name; + irqreturn_t (*handler)(int irq, void *q); +} hi65xx_irq_info[] = { + { "down", hi65xx_power_press_isr }, + { "up", hi65xx_power_release_isr }, + { "hold 4s", hi65xx_restart_toggle_isr }, +}; + +static int hi65xx_powerkey_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct input_dev *input; + int irq, i, error; + + input = devm_input_allocate_device(&pdev->dev); + if (!input) { + dev_err(&pdev->dev, "failed to allocate input device\n"); + return -ENOMEM; + } + + input->phys = "hisi_on/input0"; + input->name = "HISI 65xx PowerOn Key"; + + input_set_capability(input, EV_KEY, KEY_POWER); + input_set_capability(input, EV_KEY, KEY_RESTART); + + for (i = 0; i < ARRAY_SIZE(hi65xx_irq_info); i++) { + + irq = platform_get_irq_byname(pdev, hi65xx_irq_info[i].name); + if (irq < 0) { + error = irq; + dev_err(dev, "couldn't get irq %s: %d\n", + hi65xx_irq_info[i].name, error); + return error; + } + + error = devm_request_any_context_irq(dev, irq, + hi65xx_irq_info[i].handler, + IRQF_ONESHOT, + hi65xx_irq_info[i].name, + input); + if (error < 0) { + dev_err(dev, "couldn't request irq %s: %d\n", + hi65xx_irq_info[i].name, error); + return error; + } + } + + error = input_register_device(input); + if (error) { + dev_err(&pdev->dev, "failed to register input device: %d\n", + error); + return error; + } + + device_init_wakeup(&pdev->dev, 1); + + return 0; +} + +static int hi65xx_powerkey_remove(struct platform_device *pdev) +{ + device_init_wakeup(&pdev->dev, 0); + + return 0; +} + +static struct platform_driver hi65xx_powerkey_driver = { + .driver = { + .name = "hi65xx-powerkey", + }, + .probe = hi65xx_powerkey_probe, + .remove = hi65xx_powerkey_remove, +}; +module_platform_driver(hi65xx_powerkey_driver); + +MODULE_AUTHOR("Zhiliang Xue <xuezhiliang@huawei.com"); +MODULE_DESCRIPTION("Hisi PMIC Power key driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/input/misc/pwm-beeper.c b/drivers/input/misc/pwm-beeper.c index 8d7133268745..5f9655d49a65 100644 --- a/drivers/input/misc/pwm-beeper.c +++ b/drivers/input/misc/pwm-beeper.c @@ -20,21 +20,40 @@ #include <linux/platform_device.h> #include <linux/pwm.h> #include <linux/slab.h> +#include <linux/workqueue.h> struct pwm_beeper { struct input_dev *input; struct pwm_device *pwm; + struct work_struct work; unsigned long period; }; #define HZ_TO_NANOSECONDS(x) (1000000000UL/(x)) +static void __pwm_beeper_set(struct pwm_beeper *beeper) +{ + unsigned long period = beeper->period; + + if (period) { + pwm_config(beeper->pwm, period / 2, period); + pwm_enable(beeper->pwm); + } else + pwm_disable(beeper->pwm); +} + +static void pwm_beeper_work(struct work_struct *work) +{ + struct pwm_beeper *beeper = + container_of(work, struct pwm_beeper, work); + + __pwm_beeper_set(beeper); +} + static int pwm_beeper_event(struct input_dev *input, unsigned int type, unsigned int code, int value) { - int ret = 0; struct pwm_beeper *beeper = input_get_drvdata(input); - unsigned long period; if (type != EV_SND || value < 0) return -EINVAL; @@ -49,22 +68,31 @@ static int pwm_beeper_event(struct input_dev *input, return -EINVAL; } - if (value == 0) { - pwm_disable(beeper->pwm); - } else { - period = HZ_TO_NANOSECONDS(value); - ret = pwm_config(beeper->pwm, period / 2, period); - if (ret) - return ret; - ret = pwm_enable(beeper->pwm); - if (ret) - return ret; - beeper->period = period; - } + if (value == 0) + beeper->period = 0; + else + beeper->period = HZ_TO_NANOSECONDS(value); + + schedule_work(&beeper->work); return 0; } +static void pwm_beeper_stop(struct pwm_beeper *beeper) +{ + cancel_work_sync(&beeper->work); + + if (beeper->period) + pwm_disable(beeper->pwm); +} + +static void pwm_beeper_close(struct input_dev *input) +{ + struct pwm_beeper *beeper = input_get_drvdata(input); + + pwm_beeper_stop(beeper); +} + static int pwm_beeper_probe(struct platform_device *pdev) { unsigned long pwm_id = (unsigned long)dev_get_platdata(&pdev->dev); @@ -93,6 +121,8 @@ static int pwm_beeper_probe(struct platform_device *pdev) */ pwm_apply_args(beeper->pwm); + INIT_WORK(&beeper->work, pwm_beeper_work); + beeper->input = input_allocate_device(); if (!beeper->input) { dev_err(&pdev->dev, "Failed to allocate input device\n"); @@ -112,6 +142,7 @@ static int pwm_beeper_probe(struct platform_device *pdev) beeper->input->sndbit[0] = BIT(SND_TONE) | BIT(SND_BELL); beeper->input->event = pwm_beeper_event; + beeper->input->close = pwm_beeper_close; input_set_drvdata(beeper->input, beeper); @@ -141,7 +172,6 @@ static int pwm_beeper_remove(struct platform_device *pdev) input_unregister_device(beeper->input); - pwm_disable(beeper->pwm); pwm_free(beeper->pwm); kfree(beeper); @@ -153,8 +183,7 @@ static int __maybe_unused pwm_beeper_suspend(struct device *dev) { struct pwm_beeper *beeper = dev_get_drvdata(dev); - if (beeper->period) - pwm_disable(beeper->pwm); + pwm_beeper_stop(beeper); return 0; } @@ -163,10 +192,8 @@ static int __maybe_unused pwm_beeper_resume(struct device *dev) { struct pwm_beeper *beeper = dev_get_drvdata(dev); - if (beeper->period) { - pwm_config(beeper->pwm, beeper->period / 2, beeper->period); - pwm_enable(beeper->pwm); - } + if (beeper->period) + __pwm_beeper_set(beeper); return 0; } diff --git a/drivers/input/misc/regulator-haptic.c b/drivers/input/misc/regulator-haptic.c index a804705eb04a..2e8f801932be 100644 --- a/drivers/input/misc/regulator-haptic.c +++ b/drivers/input/misc/regulator-haptic.c @@ -124,7 +124,7 @@ regulator_haptic_parse_dt(struct device *dev, struct regulator_haptic *haptic) node = dev->of_node; if(!node) { - dev_err(dev, "Missing dveice tree data\n"); + dev_err(dev, "Missing device tree data\n"); return -EINVAL; } diff --git a/drivers/input/misc/uinput.c b/drivers/input/misc/uinput.c index abe1a927b332..65ebbd111702 100644 --- a/drivers/input/misc/uinput.c +++ b/drivers/input/misc/uinput.c @@ -981,9 +981,15 @@ static long uinput_ioctl(struct file *file, unsigned int cmd, unsigned long arg) } #ifdef CONFIG_COMPAT + +#define UI_SET_PHYS_COMPAT _IOW(UINPUT_IOCTL_BASE, 108, compat_uptr_t) + static long uinput_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { + if (cmd == UI_SET_PHYS_COMPAT) + cmd = UI_SET_PHYS; + return uinput_ioctl_handler(file, cmd, arg, compat_ptr(arg)); } #endif diff --git a/drivers/input/misc/xen-kbdfront.c b/drivers/input/misc/xen-kbdfront.c index 0a9ad2cfb55c..227fbd2dbb71 100644 --- a/drivers/input/misc/xen-kbdfront.c +++ b/drivers/input/misc/xen-kbdfront.c @@ -130,8 +130,8 @@ static int xenkbd_probe(struct xenbus_device *dev, if (xenbus_scanf(XBT_NIL, dev->otherend, "feature-abs-pointer", "%d", &abs) < 0) abs = 0; if (abs) { - ret = xenbus_printf(XBT_NIL, dev->nodename, - "request-abs-pointer", "1"); + ret = xenbus_write(XBT_NIL, dev->nodename, + "request-abs-pointer", "1"); if (ret) { pr_warning("xenkbd: can't request abs-pointer"); abs = 0; @@ -327,8 +327,8 @@ InitWait: if (ret < 0) val = 0; if (val) { - ret = xenbus_printf(XBT_NIL, info->xbdev->nodename, - "request-abs-pointer", "1"); + ret = xenbus_write(XBT_NIL, info->xbdev->nodename, + "request-abs-pointer", "1"); if (ret) pr_warning("xenkbd: can't request abs-pointer"); } |