diff options
Diffstat (limited to 'drivers/input/joystick/xpad.c')
| -rw-r--r-- | drivers/input/joystick/xpad.c | 30 |
1 files changed, 25 insertions, 5 deletions
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index f642ec8e92dd..28be88e0e96a 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -126,7 +126,6 @@ static const struct xpad_device { char *name; u8 mapping; u8 xtype; - u8 packet_type; } xpad_device[] = { { 0x0079, 0x18d4, "GPD Win 2 X-Box Controller", 0, XTYPE_XBOX360 }, { 0x03eb, 0xff01, "Wooting One (Legacy)", 0, XTYPE_XBOX360 }, @@ -475,6 +474,7 @@ static const struct usb_device_id xpad_table[] = { XPAD_XBOX360_VENDOR(0x0f0d), /* Hori Controllers */ XPAD_XBOXONE_VENDOR(0x0f0d), /* Hori Controllers */ XPAD_XBOX360_VENDOR(0x1038), /* SteelSeries Controllers */ + XPAD_XBOXONE_VENDOR(0x10f5), /* Turtle Beach Controllers */ XPAD_XBOX360_VENDOR(0x11c9), /* Nacon GC100XF */ XPAD_XBOX360_VENDOR(0x1209), /* Ardwiino Controllers */ XPAD_XBOX360_VENDOR(0x12ab), /* X-Box 360 dance pads */ @@ -493,6 +493,7 @@ static const struct usb_device_id xpad_table[] = { XPAD_XBOXONE_VENDOR(0x24c6), /* PowerA Controllers */ XPAD_XBOX360_VENDOR(0x2563), /* OneXPlayer Gamepad */ XPAD_XBOX360_VENDOR(0x260d), /* Dareu H101 */ + XPAD_XBOX360_VENDOR(0x2c22), /* Qanba Controllers */ XPAD_XBOX360_VENDOR(0x2dc8), /* 8BitDo Pro 2 Wired Controller */ XPAD_XBOXONE_VENDOR(0x2dc8), /* 8BitDo Pro 2 Wired Controller for Xbox */ XPAD_XBOXONE_VENDOR(0x2e24), /* Hyperkin Duke X-Box One pad */ @@ -559,6 +560,9 @@ struct xboxone_init_packet { #define GIP_MOTOR_LT BIT(3) #define GIP_MOTOR_ALL (GIP_MOTOR_R | GIP_MOTOR_L | GIP_MOTOR_RT | GIP_MOTOR_LT) +#define GIP_WIRED_INTF_DATA 0 +#define GIP_WIRED_INTF_AUDIO 1 + /* * This packet is required for all Xbox One pads with 2015 * or later firmware installed (or present from the factory). @@ -781,9 +785,6 @@ static void xpad_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *d input_report_key(dev, BTN_C, data[8]); input_report_key(dev, BTN_Z, data[9]); - /* Profile button has a value of 0-3, so it is reported as an axis */ - if (xpad->mapping & MAP_PROFILE_BUTTON) - input_report_abs(dev, ABS_PROFILE, data[34]); input_sync(dev); } @@ -1061,6 +1062,10 @@ static void xpadone_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char (__u16) le16_to_cpup((__le16 *)(data + 8))); } + /* Profile button has a value of 0-3, so it is reported as an axis */ + if (xpad->mapping & MAP_PROFILE_BUTTON) + input_report_abs(dev, ABS_PROFILE, data[34]); + /* paddle handling */ /* based on SDL's SDL_hidapi_xboxone.c */ if (xpad->mapping & MAP_PADDLES) { @@ -1391,6 +1396,21 @@ static int xpad_start_xbox_one(struct usb_xpad *xpad) unsigned long flags; int retval; + if (usb_ifnum_to_if(xpad->udev, GIP_WIRED_INTF_AUDIO)) { + /* + * Explicitly disable the audio interface. This is needed + * for some controllers, such as the PowerA Enhanced Wired + * Controller for Series X|S (0x20d6:0x200e) to report the + * guide button. + */ + retval = usb_set_interface(xpad->udev, + GIP_WIRED_INTF_AUDIO, 0); + if (retval) + dev_warn(&xpad->dev->dev, + "unable to disable audio interface: %d\n", + retval); + } + spin_lock_irqsave(&xpad->odata_lock, flags); /* @@ -2002,7 +2022,7 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id } if (xpad->xtype == XTYPE_XBOXONE && - intf->cur_altsetting->desc.bInterfaceNumber != 0) { + intf->cur_altsetting->desc.bInterfaceNumber != GIP_WIRED_INTF_DATA) { /* * The Xbox One controller lists three interfaces all with the * same interface class, subclass and protocol. Differentiate by |