diff options
Diffstat (limited to 'drivers/i2c')
| -rw-r--r-- | drivers/i2c/busses/Kconfig | 1 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-piix4.c | 9 | ||||
| -rw-r--r-- | drivers/i2c/i2c-smbus.c | 15 | ||||
| -rw-r--r-- | drivers/i2c/muxes/i2c-mux-gpio.c | 14 |
4 files changed, 24 insertions, 15 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 3e32fb882101..a22f9125322a 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -196,6 +196,7 @@ config I2C_ISMT config I2C_PIIX4 tristate "Intel PIIX4 and compatible (ATI/AMD/Serverworks/Broadcom/SMSC)" depends on PCI && HAS_IOPORT + select I2C_SMBUS help If you say yes to this option, support will be included for the Intel PIIX4 family of mainboard I2C interfaces. Specifically, the following diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index 84aa18d1003b..4e32d57ae0bf 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -29,6 +29,7 @@ #include <linux/stddef.h> #include <linux/ioport.h> #include <linux/i2c.h> +#include <linux/i2c-smbus.h> #include <linux/slab.h> #include <linux/dmi.h> #include <linux/acpi.h> @@ -982,6 +983,14 @@ static int piix4_add_adapter(struct pci_dev *dev, unsigned short smba, return retval; } + /* + * The AUX bus can not be probed as on some platforms it reports all + * devices present and all reads return "0". + * This would allow the ee1004 to be probed incorrectly. + */ + if (port == 0) + i2c_register_spd(adap); + *padap = adap; return 0; } diff --git a/drivers/i2c/i2c-smbus.c b/drivers/i2c/i2c-smbus.c index 1cb137b9181d..7e4203df83ed 100644 --- a/drivers/i2c/i2c-smbus.c +++ b/drivers/i2c/i2c-smbus.c @@ -352,18 +352,11 @@ void i2c_register_spd(struct i2c_adapter *adap) return; /* - * If we're a child adapter on a muxed segment, then limit slots to 8, - * as this is the max number of SPD EEPROMs that can be addressed per bus. + * The max number of SPD EEPROMs that can be addressed per bus is 8. + * If more slots are present either muxed or multiple busses are + * necessary or the additional slots are ignored. */ - if (i2c_parent_is_i2c_adapter(adap)) { - slot_count = 8; - } else { - if (slot_count > 8) { - dev_warn(&adap->dev, - "More than 8 memory slots on a single bus, contact i801 maintainer to add missing mux config\n"); - return; - } - } + slot_count = min(slot_count, 8); /* * Memory types could be found at section 7.18.2 (Memory Device — Type), table 78 diff --git a/drivers/i2c/muxes/i2c-mux-gpio.c b/drivers/i2c/muxes/i2c-mux-gpio.c index d6bbb8b68333..944577bb09c1 100644 --- a/drivers/i2c/muxes/i2c-mux-gpio.c +++ b/drivers/i2c/muxes/i2c-mux-gpio.c @@ -5,16 +5,17 @@ * Peter Korsgaard <peter.korsgaard@barco.com> */ +#include <linux/bits.h> +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/gpio/driver.h> #include <linux/i2c.h> #include <linux/i2c-mux.h> +#include <linux/module.h> #include <linux/overflow.h> #include <linux/platform_data/i2c-mux-gpio.h> #include <linux/platform_device.h> -#include <linux/module.h> #include <linux/slab.h> -#include <linux/bits.h> -#include <linux/gpio/consumer.h> -#include <linux/gpio/driver.h> struct gpiomux { struct i2c_mux_gpio_platform_data data; @@ -37,6 +38,9 @@ static int i2c_mux_gpio_select(struct i2c_mux_core *muxc, u32 chan) i2c_mux_gpio_set(mux, chan); + if (mux->data.settle_time) + fsleep(mux->data.settle_time); + return 0; } @@ -116,6 +120,8 @@ static int i2c_mux_gpio_probe_fw(struct gpiomux *mux, if (device_property_read_u32(dev, "idle-state", &mux->data.idle)) mux->data.idle = I2C_MUX_GPIO_NO_IDLE; + device_property_read_u32(dev, "settle-time-us", &mux->data.settle_time); + return 0; } |