diff options
Diffstat (limited to 'drivers/i2c/busses/i2c-i801.c')
| -rw-r--r-- | drivers/i2c/busses/i2c-i801.c | 115 |
1 files changed, 56 insertions, 59 deletions
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 89ae78ef1a1c..41446f9cc52d 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -64,6 +64,7 @@ * Cannon Lake-LP (PCH) 0x9da3 32 hard yes yes yes * Cedar Fork (PCH) 0x18df 32 hard yes yes yes * Ice Lake-LP (PCH) 0x34a3 32 hard yes yes yes + * Ice Lake-N (PCH) 0x38a3 32 hard yes yes yes * Comet Lake (PCH) 0x02a3 32 hard yes yes yes * Comet Lake-H (PCH) 0x06a3 32 hard yes yes yes * Elkhart Lake (PCH) 0x4b23 32 hard yes yes yes @@ -190,6 +191,7 @@ #define SMBSLVSTS_HST_NTFY_STS BIT(0) /* Host Notify Command register bits */ +#define SMBSLVCMD_SMBALERT_DISABLE BIT(2) #define SMBSLVCMD_HST_NTFY_INTREN BIT(0) #define STATUS_ERROR_FLAGS (SMBHSTSTS_FAILED | SMBHSTSTS_BUS_ERR | \ @@ -218,6 +220,7 @@ #define PCI_DEVICE_ID_INTEL_COLETOCREEK_SMBUS 0x23b0 #define PCI_DEVICE_ID_INTEL_GEMINILAKE_SMBUS 0x31d4 #define PCI_DEVICE_ID_INTEL_ICELAKE_LP_SMBUS 0x34a3 +#define PCI_DEVICE_ID_INTEL_ICELAKE_N_SMBUS 0x38a3 #define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS 0x3b30 #define PCI_DEVICE_ID_INTEL_TIGERLAKE_H_SMBUS 0x43a3 #define PCI_DEVICE_ID_INTEL_ELKHART_LAKE_SMBUS 0x4b23 @@ -257,6 +260,7 @@ struct i801_priv { struct i2c_adapter adapter; unsigned long smba; unsigned char original_hstcfg; + unsigned char original_hstcnt; unsigned char original_slvcmd; struct pci_dev *pci_dev; unsigned int features; @@ -639,12 +643,20 @@ static irqreturn_t i801_isr(int irq, void *dev_id) i801_isr_byte_done(priv); /* - * Clear irq sources and report transaction result. + * Clear remaining IRQ sources: Completion of last command, errors + * and the SMB_ALERT signal. SMB_ALERT status is set after signal + * assertion independently of the interrupt generation being blocked + * or not so clear it always when the status is set. + */ + status &= SMBHSTSTS_INTR | STATUS_ERROR_FLAGS | SMBHSTSTS_SMBALERT_STS; + if (status) + outb_p(status, SMBHSTSTS(priv)); + status &= ~SMBHSTSTS_SMBALERT_STS; /* SMB_ALERT not reported */ + /* + * Report transaction result. * ->status must be cleared before the next transaction is started. */ - status &= SMBHSTSTS_INTR | STATUS_ERROR_FLAGS; if (status) { - outb_p(status, SMBHSTSTS(priv)); priv->status = status; complete(&priv->done); } @@ -972,9 +984,13 @@ static void i801_enable_host_notify(struct i2c_adapter *adapter) if (!(priv->features & FEATURE_HOST_NOTIFY)) return; - if (!(SMBSLVCMD_HST_NTFY_INTREN & priv->original_slvcmd)) - outb_p(SMBSLVCMD_HST_NTFY_INTREN | priv->original_slvcmd, - SMBSLVCMD(priv)); + /* + * Enable host notify interrupt and block the generation of interrupt + * from the SMB_ALERT signal because the driver does not support + * SMBus Alert. + */ + outb_p(SMBSLVCMD_HST_NTFY_INTREN | SMBSLVCMD_SMBALERT_DISABLE | + priv->original_slvcmd, SMBSLVCMD(priv)); /* clear Host Notify bit to allow a new notification */ outb_p(SMBSLVSTS_HST_NTFY_STS, SMBSLVSTS(priv)); @@ -1042,6 +1058,7 @@ static const struct pci_device_id i801_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CANNONLAKE_H_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CANNONLAKE_LP_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICELAKE_LP_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICELAKE_N_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_COMETLAKE_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_COMETLAKE_H_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_COMETLAKE_V_SMBUS) }, @@ -1192,7 +1209,7 @@ static acpi_status check_acpi_smo88xx_device(acpi_handle obj_handle, kfree(info); - *((bool *)return_value) = true; + *return_value = NULL; return AE_CTRL_TERMINATE; smo88xx_not_found: @@ -1202,11 +1219,9 @@ smo88xx_not_found: static bool is_dell_system_with_lis3lv02d(void) { - bool found; - const char *vendor; + void *err = ERR_PTR(-ENOENT); - vendor = dmi_get_system_info(DMI_SYS_VENDOR); - if (!vendor || strcmp(vendor, "Dell Inc.")) + if (!dmi_match(DMI_SYS_VENDOR, "Dell Inc.")) return false; /* @@ -1217,11 +1232,9 @@ static bool is_dell_system_with_lis3lv02d(void) * accelerometer but unfortunately ACPI does not provide any other * information (like I2C address). */ - found = false; - acpi_get_devices(NULL, check_acpi_smo88xx_device, NULL, - (void **)&found); + acpi_get_devices(NULL, check_acpi_smo88xx_device, NULL, &err); - return found; + return !IS_ERR(err); } /* @@ -1395,7 +1408,7 @@ static const struct dmi_system_id mux_dmi_table[] = { }; /* Setup multiplexing if needed */ -static int i801_add_mux(struct i801_priv *priv) +static void i801_add_mux(struct i801_priv *priv) { struct device *dev = &priv->adapter.dev; const struct i801_mux_config *mux_config; @@ -1404,7 +1417,7 @@ static int i801_add_mux(struct i801_priv *priv) int i; if (!priv->mux_drvdata) - return 0; + return; mux_config = priv->mux_drvdata; /* Prepare the platform data */ @@ -1420,13 +1433,11 @@ static int i801_add_mux(struct i801_priv *priv) struct_size(lookup, table, mux_config->n_gpios + 1), GFP_KERNEL); if (!lookup) - return -ENOMEM; + return; lookup->dev_id = "i2c-mux-gpio"; - for (i = 0; i < mux_config->n_gpios; i++) { - lookup->table[i] = (struct gpiod_lookup) - GPIO_LOOKUP(mux_config->gpio_chip, - mux_config->gpios[i], "mux", 0); - } + for (i = 0; i < mux_config->n_gpios; i++) + lookup->table[i] = GPIO_LOOKUP(mux_config->gpio_chip, + mux_config->gpios[i], "mux", 0); gpiod_add_lookup_table(lookup); priv->lookup = lookup; @@ -1444,8 +1455,6 @@ static int i801_add_mux(struct i801_priv *priv) gpiod_remove_lookup_table(lookup); dev_err(dev, "Failed to register i2c-mux-gpio device\n"); } - - return PTR_ERR_OR_ZERO(priv->mux_pdev); } static void i801_del_mux(struct i801_priv *priv) @@ -1475,7 +1484,7 @@ static unsigned int i801_get_adapter_class(struct i801_priv *priv) return class; } #else -static inline int i801_add_mux(struct i801_priv *priv) { return 0; } +static inline void i801_add_mux(struct i801_priv *priv) { } static inline void i801_del_mux(struct i801_priv *priv) { } static inline unsigned int i801_get_adapter_class(struct i801_priv *priv) @@ -1493,7 +1502,6 @@ static struct platform_device * i801_add_tco_spt(struct i801_priv *priv, struct pci_dev *pci_dev, struct resource *tco_res) { - static DEFINE_MUTEX(p2sb_mutex); struct resource *res; unsigned int devfn; u64 base64_addr; @@ -1506,7 +1514,7 @@ i801_add_tco_spt(struct i801_priv *priv, struct pci_dev *pci_dev, * enumerated by the PCI subsystem, so we need to unhide/hide it * to lookup the P2SB BAR. */ - mutex_lock(&p2sb_mutex); + pci_lock_rescan_remove(); devfn = PCI_DEVFN(PCI_SLOT(pci_dev->devfn), 1); @@ -1524,7 +1532,7 @@ i801_add_tco_spt(struct i801_priv *priv, struct pci_dev *pci_dev, /* Hide the P2SB device, if it was hidden before */ if (hidden) pci_bus_write_config_byte(pci_dev->bus, devfn, 0xe1, hidden); - mutex_unlock(&p2sb_mutex); + pci_unlock_rescan_remove(); res = &tco_res[1]; if (pci_dev->device == PCI_DEVICE_ID_INTEL_DNV_SMBUS) @@ -1624,7 +1632,7 @@ i801_acpi_io_handler(u32 function, acpi_physical_address address, u32 bits, * BIOS is accessing the host controller so prevent it from * suspending automatically from now on. */ - pm_runtime_set_autosuspend_delay(&pdev->dev, -1); + pm_runtime_get_sync(&pdev->dev); } if ((function & ACPI_IO_MASK) == ACPI_READ) @@ -1639,31 +1647,22 @@ i801_acpi_io_handler(u32 function, acpi_physical_address address, u32 bits, static int i801_acpi_probe(struct i801_priv *priv) { - struct acpi_device *adev; + acpi_handle ah = ACPI_HANDLE(&priv->pci_dev->dev); acpi_status status; - adev = ACPI_COMPANION(&priv->pci_dev->dev); - if (adev) { - status = acpi_install_address_space_handler(adev->handle, - ACPI_ADR_SPACE_SYSTEM_IO, i801_acpi_io_handler, - NULL, priv); - if (ACPI_SUCCESS(status)) - return 0; - } + status = acpi_install_address_space_handler(ah, ACPI_ADR_SPACE_SYSTEM_IO, + i801_acpi_io_handler, NULL, priv); + if (ACPI_SUCCESS(status)) + return 0; return acpi_check_resource_conflict(&priv->pci_dev->resource[SMBBAR]); } static void i801_acpi_remove(struct i801_priv *priv) { - struct acpi_device *adev; - - adev = ACPI_COMPANION(&priv->pci_dev->dev); - if (!adev) - return; + acpi_handle ah = ACPI_HANDLE(&priv->pci_dev->dev); - acpi_remove_address_space_handler(adev->handle, - ACPI_ADR_SPACE_SYSTEM_IO, i801_acpi_io_handler); + acpi_remove_address_space_handler(ah, ACPI_ADR_SPACE_SYSTEM_IO, i801_acpi_io_handler); } #else static inline int i801_acpi_probe(struct i801_priv *priv) { return 0; } @@ -1675,7 +1674,6 @@ static void i801_setup_hstcfg(struct i801_priv *priv) unsigned char hstcfg = priv->original_hstcfg; hstcfg &= ~SMBHSTCFG_I2C_EN; /* SMBus timing */ - hstcfg &= ~SMBHSTCNT_PEC_EN; /* Disable software PEC */ hstcfg |= SMBHSTCFG_HST_EN; pci_write_config_byte(priv->pci_dev, SMBHSTCFG, hstcfg); } @@ -1720,6 +1718,7 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id) case PCI_DEVICE_ID_INTEL_CANNONLAKE_LP_SMBUS: case PCI_DEVICE_ID_INTEL_CDF_SMBUS: case PCI_DEVICE_ID_INTEL_ICELAKE_LP_SMBUS: + case PCI_DEVICE_ID_INTEL_ICELAKE_N_SMBUS: case PCI_DEVICE_ID_INTEL_COMETLAKE_SMBUS: case PCI_DEVICE_ID_INTEL_COMETLAKE_H_SMBUS: case PCI_DEVICE_ID_INTEL_ELKHART_LAKE_SMBUS: @@ -1820,7 +1819,8 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id) outb_p(inb_p(SMBAUXCTL(priv)) & ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B), SMBAUXCTL(priv)); - /* Remember original Host Notify setting */ + /* Remember original Interrupt and Host Notify settings */ + priv->original_hstcnt = inb_p(SMBHSTCNT(priv)) & ~SMBHSTCNT_KILL; if (priv->features & FEATURE_HOST_NOTIFY) priv->original_slvcmd = inb_p(SMBSLVCMD(priv)); @@ -1831,19 +1831,12 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id) priv->features &= ~FEATURE_IRQ; if (priv->features & FEATURE_IRQ) { - u16 pcictl, pcists; + u16 pcists; /* Complain if an interrupt is already pending */ pci_read_config_word(priv->pci_dev, PCI_STATUS, &pcists); if (pcists & PCI_STATUS_INTERRUPT) dev_warn(&dev->dev, "An interrupt is pending!\n"); - - /* Check if interrupts have been disabled */ - pci_read_config_word(priv->pci_dev, PCI_COMMAND, &pcictl); - if (pcictl & PCI_COMMAND_INTX_DISABLE) { - dev_info(&dev->dev, "Interrupts are disabled\n"); - priv->features &= ~FEATURE_IRQ; - } } if (priv->features & FEATURE_IRQ) { @@ -1891,9 +1884,7 @@ static void i801_remove(struct pci_dev *dev) { struct i801_priv *priv = pci_get_drvdata(dev); - pm_runtime_forbid(&dev->dev); - pm_runtime_get_noresume(&dev->dev); - + outb_p(priv->original_hstcnt, SMBHSTCNT(priv)); i801_disable_host_notify(priv); i801_del_mux(priv); i2c_del_adapter(&priv->adapter); @@ -1902,6 +1893,10 @@ static void i801_remove(struct pci_dev *dev) platform_device_unregister(priv->tco_pdev); + /* if acpi_reserved is set then usage_count is incremented already */ + if (!priv->acpi_reserved) + pm_runtime_get_noresume(&dev->dev); + /* * do not call pci_disable_device(dev) since it can cause hard hangs on * some systems during power-off (eg. Fujitsu-Siemens Lifebook E8010) @@ -1913,6 +1908,7 @@ static void i801_shutdown(struct pci_dev *dev) struct i801_priv *priv = pci_get_drvdata(dev); /* Restore config registers to avoid hard hang on some systems */ + outb_p(priv->original_hstcnt, SMBHSTCNT(priv)); i801_disable_host_notify(priv); pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg); } @@ -1922,6 +1918,7 @@ static int i801_suspend(struct device *dev) { struct i801_priv *priv = dev_get_drvdata(dev); + outb_p(priv->original_hstcnt, SMBHSTCNT(priv)); pci_write_config_byte(priv->pci_dev, SMBHSTCFG, priv->original_hstcfg); return 0; } |