diff options
Diffstat (limited to 'drivers/gpu/drm/panel/panel-elida-kd35t133.c')
| -rw-r--r-- | drivers/gpu/drm/panel/panel-elida-kd35t133.c | 352 | 
1 files changed, 352 insertions, 0 deletions
| diff --git a/drivers/gpu/drm/panel/panel-elida-kd35t133.c b/drivers/gpu/drm/panel/panel-elida-kd35t133.c new file mode 100644 index 000000000000..711ded453c44 --- /dev/null +++ b/drivers/gpu/drm/panel/panel-elida-kd35t133.c @@ -0,0 +1,352 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Elida kd35t133 5.5" MIPI-DSI panel driver + * Copyright (C) 2020 Theobroma Systems Design und Consulting GmbH + * + * based on + * + * Rockteck jh057n00900 5.5" MIPI-DSI panel driver + * Copyright (C) Purism SPC 2019 + */ + +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/media-bus-format.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/regulator/consumer.h> + +#include <video/display_timing.h> +#include <video/mipi_display.h> + +#include <drm/drm_mipi_dsi.h> +#include <drm/drm_modes.h> +#include <drm/drm_panel.h> +#include <drm/drm_print.h> + +/* Manufacturer specific Commands send via DSI */ +#define KD35T133_CMD_INTERFACEMODECTRL		0xb0 +#define KD35T133_CMD_FRAMERATECTRL		0xb1 +#define KD35T133_CMD_DISPLAYINVERSIONCTRL	0xb4 +#define KD35T133_CMD_DISPLAYFUNCTIONCTRL	0xb6 +#define KD35T133_CMD_POWERCONTROL1		0xc0 +#define KD35T133_CMD_POWERCONTROL2		0xc1 +#define KD35T133_CMD_VCOMCONTROL		0xc5 +#define KD35T133_CMD_POSITIVEGAMMA		0xe0 +#define KD35T133_CMD_NEGATIVEGAMMA		0xe1 +#define KD35T133_CMD_SETIMAGEFUNCTION		0xe9 +#define KD35T133_CMD_ADJUSTCONTROL3		0xf7 + +struct kd35t133 { +	struct device *dev; +	struct drm_panel panel; +	struct gpio_desc *reset_gpio; +	struct regulator *vdd; +	struct regulator *iovcc; +	bool prepared; +}; + +static inline struct kd35t133 *panel_to_kd35t133(struct drm_panel *panel) +{ +	return container_of(panel, struct kd35t133, panel); +} + +#define dsi_dcs_write_seq(dsi, cmd, seq...) do {			\ +		static const u8 d[] = { seq };				\ +		int ret;						\ +		ret = mipi_dsi_dcs_write(dsi, cmd, d, ARRAY_SIZE(d));	\ +		if (ret < 0)						\ +			return ret;					\ +	} while (0) + +static int kd35t133_init_sequence(struct kd35t133 *ctx) +{ +	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); +	struct device *dev = ctx->dev; + +	/* +	 * Init sequence was supplied by the panel vendor with minimal +	 * documentation. +	 */ +	dsi_dcs_write_seq(dsi, KD35T133_CMD_POSITIVEGAMMA, +			  0x00, 0x13, 0x18, 0x04, 0x0f, 0x06, 0x3a, 0x56, +			  0x4d, 0x03, 0x0a, 0x06, 0x30, 0x3e, 0x0f); +	dsi_dcs_write_seq(dsi, KD35T133_CMD_NEGATIVEGAMMA, +			  0x00, 0x13, 0x18, 0x01, 0x11, 0x06, 0x38, 0x34, +			  0x4d, 0x06, 0x0d, 0x0b, 0x31, 0x37, 0x0f); +	dsi_dcs_write_seq(dsi, KD35T133_CMD_POWERCONTROL1, 0x18, 0x17); +	dsi_dcs_write_seq(dsi, KD35T133_CMD_POWERCONTROL2, 0x41); +	dsi_dcs_write_seq(dsi, KD35T133_CMD_VCOMCONTROL, 0x00, 0x1a, 0x80); +	dsi_dcs_write_seq(dsi, MIPI_DCS_SET_ADDRESS_MODE, 0x48); +	dsi_dcs_write_seq(dsi, MIPI_DCS_SET_PIXEL_FORMAT, 0x55); +	dsi_dcs_write_seq(dsi, KD35T133_CMD_INTERFACEMODECTRL, 0x00); +	dsi_dcs_write_seq(dsi, KD35T133_CMD_FRAMERATECTRL, 0xa0); +	dsi_dcs_write_seq(dsi, KD35T133_CMD_DISPLAYINVERSIONCTRL, 0x02); +	dsi_dcs_write_seq(dsi, KD35T133_CMD_DISPLAYFUNCTIONCTRL, +			  0x20, 0x02); +	dsi_dcs_write_seq(dsi, KD35T133_CMD_SETIMAGEFUNCTION, 0x00); +	dsi_dcs_write_seq(dsi, KD35T133_CMD_ADJUSTCONTROL3, +			  0xa9, 0x51, 0x2c, 0x82); +	mipi_dsi_dcs_write(dsi, MIPI_DCS_ENTER_INVERT_MODE, NULL, 0); + +	DRM_DEV_DEBUG_DRIVER(dev, "Panel init sequence done\n"); +	return 0; +} + +static int kd35t133_unprepare(struct drm_panel *panel) +{ +	struct kd35t133 *ctx = panel_to_kd35t133(panel); +	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); +	int ret; + +	if (!ctx->prepared) +		return 0; + +	ret = mipi_dsi_dcs_set_display_off(dsi); +	if (ret < 0) +		DRM_DEV_ERROR(ctx->dev, "failed to set display off: %d\n", +			      ret); + +	ret = mipi_dsi_dcs_enter_sleep_mode(dsi); +	if (ret < 0) { +		DRM_DEV_ERROR(ctx->dev, "failed to enter sleep mode: %d\n", +			      ret); +		return ret; +	} + +	regulator_disable(ctx->iovcc); +	regulator_disable(ctx->vdd); + +	ctx->prepared = false; + +	return 0; +} + +static int kd35t133_prepare(struct drm_panel *panel) +{ +	struct kd35t133 *ctx = panel_to_kd35t133(panel); +	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); +	int ret; + +	if (ctx->prepared) +		return 0; + +	DRM_DEV_DEBUG_DRIVER(ctx->dev, "Resetting the panel\n"); +	ret = regulator_enable(ctx->vdd); +	if (ret < 0) { +		DRM_DEV_ERROR(ctx->dev, +			      "Failed to enable vdd supply: %d\n", ret); +		return ret; +	} + +	ret = regulator_enable(ctx->iovcc); +	if (ret < 0) { +		DRM_DEV_ERROR(ctx->dev, +			      "Failed to enable iovcc supply: %d\n", ret); +		goto disable_vdd; +	} + +	msleep(20); + +	gpiod_set_value_cansleep(ctx->reset_gpio, 1); +	usleep_range(10, 20); +	gpiod_set_value_cansleep(ctx->reset_gpio, 0); + +	msleep(20); + +	ret = mipi_dsi_dcs_exit_sleep_mode(dsi); +	if (ret < 0) { +		DRM_DEV_ERROR(ctx->dev, "Failed to exit sleep mode: %d\n", ret); +		goto disable_iovcc; +	} + +	msleep(250); + +	ret = kd35t133_init_sequence(ctx); +	if (ret < 0) { +		DRM_DEV_ERROR(ctx->dev, "Panel init sequence failed: %d\n", +			      ret); +		goto disable_iovcc; +	} + +	ret = mipi_dsi_dcs_set_display_on(dsi); +	if (ret < 0) { +		DRM_DEV_ERROR(ctx->dev, "Failed to set display on: %d\n", ret); +		goto disable_iovcc; +	} + +	msleep(50); + +	ctx->prepared = true; + +	return 0; + +disable_iovcc: +	regulator_disable(ctx->iovcc); +disable_vdd: +	regulator_disable(ctx->vdd); +	return ret; +} + +static const struct drm_display_mode default_mode = { +	.hdisplay	= 320, +	.hsync_start	= 320 + 130, +	.hsync_end	= 320 + 130 + 4, +	.htotal		= 320 + 130 + 4 + 130, +	.vdisplay	= 480, +	.vsync_start	= 480 + 2, +	.vsync_end	= 480 + 2 + 1, +	.vtotal		= 480 + 2 + 1 + 2, +	.vrefresh	= 60, +	.clock		= 17000, +	.width_mm	= 42, +	.height_mm	= 82, +}; + +static int kd35t133_get_modes(struct drm_panel *panel, +				struct drm_connector *connector) +{ +	struct kd35t133 *ctx = panel_to_kd35t133(panel); +	struct drm_display_mode *mode; + +	mode = drm_mode_duplicate(connector->dev, &default_mode); +	if (!mode) { +		DRM_DEV_ERROR(ctx->dev, "Failed to add mode %ux%u@%u\n", +			      default_mode.hdisplay, default_mode.vdisplay, +			      default_mode.vrefresh); +		return -ENOMEM; +	} + +	drm_mode_set_name(mode); + +	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; +	connector->display_info.width_mm = mode->width_mm; +	connector->display_info.height_mm = mode->height_mm; +	drm_mode_probed_add(connector, mode); + +	return 1; +} + +static const struct drm_panel_funcs kd35t133_funcs = { +	.unprepare	= kd35t133_unprepare, +	.prepare	= kd35t133_prepare, +	.get_modes	= kd35t133_get_modes, +}; + +static int kd35t133_probe(struct mipi_dsi_device *dsi) +{ +	struct device *dev = &dsi->dev; +	struct kd35t133 *ctx; +	int ret; + +	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); +	if (!ctx) +		return -ENOMEM; + +	ctx->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); +	if (IS_ERR(ctx->reset_gpio)) { +		DRM_DEV_ERROR(dev, "cannot get reset gpio\n"); +		return PTR_ERR(ctx->reset_gpio); +	} + +	ctx->vdd = devm_regulator_get(dev, "vdd"); +	if (IS_ERR(ctx->vdd)) { +		ret = PTR_ERR(ctx->vdd); +		if (ret != -EPROBE_DEFER) +			DRM_DEV_ERROR(dev, +				      "Failed to request vdd regulator: %d\n", +				      ret); +		return ret; +	} + +	ctx->iovcc = devm_regulator_get(dev, "iovcc"); +	if (IS_ERR(ctx->iovcc)) { +		ret = PTR_ERR(ctx->iovcc); +		if (ret != -EPROBE_DEFER) +			DRM_DEV_ERROR(dev, +				      "Failed to request iovcc regulator: %d\n", +				      ret); +		return ret; +	} + +	mipi_dsi_set_drvdata(dsi, ctx); + +	ctx->dev = dev; + +	dsi->lanes = 1; +	dsi->format = MIPI_DSI_FMT_RGB888; +	dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST | +			  MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_EOT_PACKET; + +	drm_panel_init(&ctx->panel, &dsi->dev, &kd35t133_funcs, +		       DRM_MODE_CONNECTOR_DSI); + +	ret = drm_panel_of_backlight(&ctx->panel); +	if (ret) +		return ret; + +	drm_panel_add(&ctx->panel); + +	ret = mipi_dsi_attach(dsi); +	if (ret < 0) { +		DRM_DEV_ERROR(dev, "mipi_dsi_attach failed: %d\n", ret); +		drm_panel_remove(&ctx->panel); +		return ret; +	} + +	return 0; +} + +static void kd35t133_shutdown(struct mipi_dsi_device *dsi) +{ +	struct kd35t133 *ctx = mipi_dsi_get_drvdata(dsi); +	int ret; + +	ret = drm_panel_unprepare(&ctx->panel); +	if (ret < 0) +		DRM_DEV_ERROR(&dsi->dev, "Failed to unprepare panel: %d\n", +			      ret); + +	ret = drm_panel_disable(&ctx->panel); +	if (ret < 0) +		DRM_DEV_ERROR(&dsi->dev, "Failed to disable panel: %d\n", +			      ret); +} + +static int kd35t133_remove(struct mipi_dsi_device *dsi) +{ +	struct kd35t133 *ctx = mipi_dsi_get_drvdata(dsi); +	int ret; + +	kd35t133_shutdown(dsi); + +	ret = mipi_dsi_detach(dsi); +	if (ret < 0) +		DRM_DEV_ERROR(&dsi->dev, "Failed to detach from DSI host: %d\n", +			      ret); + +	drm_panel_remove(&ctx->panel); + +	return 0; +} + +static const struct of_device_id kd35t133_of_match[] = { +	{ .compatible = "elida,kd35t133" }, +	{ /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, kd35t133_of_match); + +static struct mipi_dsi_driver kd35t133_driver = { +	.driver = { +		.name = "panel-elida-kd35t133", +		.of_match_table = kd35t133_of_match, +	}, +	.probe	= kd35t133_probe, +	.remove = kd35t133_remove, +	.shutdown = kd35t133_shutdown, +}; +module_mipi_dsi_driver(kd35t133_driver); + +MODULE_AUTHOR("Heiko Stuebner <[email protected]>"); +MODULE_DESCRIPTION("DRM driver for Elida kd35t133 MIPI DSI panel"); +MODULE_LICENSE("GPL v2"); |