1 files changed, 344 insertions, 0 deletions
diff --git a/drivers/gpu/drm/msm/adreno/a5xx_power.c b/drivers/gpu/drm/msm/adreno/a5xx_power.c
new file mode 100644
index 000000000000..72d52c71f769
--- /dev/null
+++ b/drivers/gpu/drm/msm/adreno/a5xx_power.c
@@ -0,0 +1,344 @@
+/* Copyright (c) 2016 The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/pm_opp.h>
+#include "a5xx_gpu.h"
+
+/*
+ * The GPMU data block is a block of shared registers that can be used to
+ * communicate back and forth. These "registers" are by convention with the GPMU
+ * firwmare and not bound to any specific hardware design
+ */
+
+#define AGC_INIT_BASE REG_A5XX_GPMU_DATA_RAM_BASE
+#define AGC_INIT_MSG_MAGIC (AGC_INIT_BASE + 5)
+#define AGC_MSG_BASE (AGC_INIT_BASE + 7)
+
+#define AGC_MSG_STATE (AGC_MSG_BASE + 0)
+#define AGC_MSG_COMMAND (AGC_MSG_BASE + 1)
+#define AGC_MSG_PAYLOAD_SIZE (AGC_MSG_BASE + 3)
+#define AGC_MSG_PAYLOAD(_o) ((AGC_MSG_BASE + 5) + (_o))
+
+#define AGC_POWER_CONFIG_PRODUCTION_ID 1
+#define AGC_INIT_MSG_VALUE 0xBABEFACE
+
+static struct {
+	uint32_t reg;
+	uint32_t value;
+} a5xx_sequence_regs[] = {
+	{ 0xB9A1, 0x00010303 },
+	{ 0xB9A2, 0x13000000 },
+	{ 0xB9A3, 0x00460020 },
+	{ 0xB9A4, 0x10000000 },
+	{ 0xB9A5, 0x040A1707 },
+	{ 0xB9A6, 0x00010000 },
+	{ 0xB9A7, 0x0E000904 },
+	{ 0xB9A8, 0x10000000 },
+	{ 0xB9A9, 0x01165000 },
+	{ 0xB9AA, 0x000E0002 },
+	{ 0xB9AB, 0x03884141 },
+	{ 0xB9AC, 0x10000840 },
+	{ 0xB9AD, 0x572A5000 },
+	{ 0xB9AE, 0x00000003 },
+	{ 0xB9AF, 0x00000000 },
+	{ 0xB9B0, 0x10000000 },
+	{ 0xB828, 0x6C204010 },
+	{ 0xB829, 0x6C204011 },
+	{ 0xB82A, 0x6C204012 },
+	{ 0xB82B, 0x6C204013 },
+	{ 0xB82C, 0x6C204014 },
+	{ 0xB90F, 0x00000004 },
+	{ 0xB910, 0x00000002 },
+	{ 0xB911, 0x00000002 },
+	{ 0xB912, 0x00000002 },
+	{ 0xB913, 0x00000002 },
+	{ 0xB92F, 0x00000004 },
+	{ 0xB930, 0x00000005 },
+	{ 0xB931, 0x00000005 },
+	{ 0xB932, 0x00000005 },
+	{ 0xB933, 0x00000005 },
+	{ 0xB96F, 0x00000001 },
+	{ 0xB970, 0x00000003 },
+	{ 0xB94F, 0x00000004 },
+	{ 0xB950, 0x0000000B },
+	{ 0xB951, 0x0000000B },
+	{ 0xB952, 0x0000000B },
+	{ 0xB953, 0x0000000B },
+	{ 0xB907, 0x00000019 },
+	{ 0xB927, 0x00000019 },
+	{ 0xB947, 0x00000019 },
+	{ 0xB967, 0x00000019 },
+	{ 0xB987, 0x00000019 },
+	{ 0xB906, 0x00220001 },
+	{ 0xB926, 0x00220001 },
+	{ 0xB946, 0x00220001 },
+	{ 0xB966, 0x00220001 },
+	{ 0xB986, 0x00300000 },
+	{ 0xAC40, 0x0340FF41 },
+	{ 0xAC41, 0x03BEFED0 },
+	{ 0xAC42, 0x00331FED },
+	{ 0xAC43, 0x021FFDD3 },
+	{ 0xAC44, 0x5555AAAA },
+	{ 0xAC45, 0x5555AAAA },
+	{ 0xB9BA, 0x00000008 },
+};
+
+/*
+ * Get the actual voltage value for the operating point at the specified
+ * frequency
+ */
+static inline uint32_t _get_mvolts(struct msm_gpu *gpu, uint32_t freq)
+{
+	struct drm_device *dev = gpu->dev;
+	struct msm_drm_private *priv = dev->dev_private;
+	struct platform_device *pdev = priv->gpu_pdev;
+	struct dev_pm_opp *opp;
+
+	opp = dev_pm_opp_find_freq_exact(&pdev->dev, freq, true);
+
+	return (!IS_ERR(opp)) ? dev_pm_opp_get_voltage(opp) / 1000 : 0;
+}
+
+/* Setup thermal limit management */
+static void a5xx_lm_setup(struct msm_gpu *gpu)
+{
+	struct adreno_gpu *adreno_gpu = to_adreno_gpu(gpu);
+	struct a5xx_gpu *a5xx_gpu = to_a5xx_gpu(adreno_gpu);
+	unsigned int i;
+
+	/* Write the block of sequence registers */
+	for (i = 0; i < ARRAY_SIZE(a5xx_sequence_regs); i++)
+		gpu_write(gpu, a5xx_sequence_regs[i].reg,
+			a5xx_sequence_regs[i].value);
+
+	/* Hard code the A530 GPU thermal sensor ID for the GPMU */
+	gpu_write(gpu, REG_A5XX_GPMU_TEMP_SENSOR_ID, 0x60007);
+	gpu_write(gpu, REG_A5XX_GPMU_DELTA_TEMP_THRESHOLD, 0x01);
+	gpu_write(gpu, REG_A5XX_GPMU_TEMP_SENSOR_CONFIG, 0x01);
+
+	/* Until we get clock scaling 0 is always the active power level */
+	gpu_write(gpu, REG_A5XX_GPMU_GPMU_VOLTAGE, 0x80000000 | 0);
+
+	gpu_write(gpu, REG_A5XX_GPMU_BASE_LEAKAGE, a5xx_gpu->lm_leakage);
+
+	/* The threshold is fixed at 6000 for A530 */
+	gpu_write(gpu, REG_A5XX_GPMU_GPMU_PWR_THRESHOLD, 0x80000000 | 6000);
+
+	gpu_write(gpu, REG_A5XX_GPMU_BEC_ENABLE, 0x10001FFF);
+	gpu_write(gpu, REG_A5XX_GDPM_CONFIG1, 0x00201FF1);
+
+	/* Write the voltage table */
+	gpu_write(gpu, REG_A5XX_GPMU_BEC_ENABLE, 0x10001FFF);
+	gpu_write(gpu, REG_A5XX_GDPM_CONFIG1, 0x201FF1);
+
+	gpu_write(gpu, AGC_MSG_STATE, 1);
+	gpu_write(gpu, AGC_MSG_COMMAND, AGC_POWER_CONFIG_PRODUCTION_ID);
+
+	/* Write the max power - hard coded to 5448 for A530 */
+	gpu_write(gpu, AGC_MSG_PAYLOAD(0), 5448);
+	gpu_write(gpu, AGC_MSG_PAYLOAD(1), 1);
+
+	/*
+	 * For now just write the one voltage level - we will do more when we
+	 * can do scaling
+	 */
+	gpu_write(gpu, AGC_MSG_PAYLOAD(2), _get_mvolts(gpu, gpu->fast_rate));
+	gpu_write(gpu, AGC_MSG_PAYLOAD(3), gpu->fast_rate / 1000000);
+
+	gpu_write(gpu, AGC_MSG_PAYLOAD_SIZE, 4 * sizeof(uint32_t));
+	gpu_write(gpu, AGC_INIT_MSG_MAGIC, AGC_INIT_MSG_VALUE);
+}
+
+/* Enable SP/TP cpower collapse */
+static void a5xx_pc_init(struct msm_gpu *gpu)
+{
+	gpu_write(gpu, REG_A5XX_GPMU_PWR_COL_INTER_FRAME_CTRL, 0x7F);
+	gpu_write(gpu, REG_A5XX_GPMU_PWR_COL_BINNING_CTRL, 0);
+	gpu_write(gpu, REG_A5XX_GPMU_PWR_COL_INTER_FRAME_HYST, 0xA0080);
+	gpu_write(gpu, REG_A5XX_GPMU_PWR_COL_STAGGER_DELAY, 0x600040);
+}
+
+/* Enable the GPMU microcontroller */
+static int a5xx_gpmu_init(struct msm_gpu *gpu)
+{
+	struct adreno_gpu *adreno_gpu = to_adreno_gpu(gpu);
+	struct a5xx_gpu *a5xx_gpu = to_a5xx_gpu(adreno_gpu);
+	struct msm_ringbuffer *ring = gpu->rb;
+
+	if (!a5xx_gpu->gpmu_dwords)
+		return 0;
+
+	/* Turn off protected mode for this operation */
+	OUT_PKT7(ring, CP_SET_PROTECTED_MODE, 1);
+	OUT_RING(ring, 0);
+
+	/* Kick off the IB to load the GPMU microcode */
+	OUT_PKT7(ring, CP_INDIRECT_BUFFER_PFE, 3);
+	OUT_RING(ring, lower_32_bits(a5xx_gpu->gpmu_iova));
+	OUT_RING(ring, upper_32_bits(a5xx_gpu->gpmu_iova));
+	OUT_RING(ring, a5xx_gpu->gpmu_dwords);
+
+	/* Turn back on protected mode */
+	OUT_PKT7(ring, CP_SET_PROTECTED_MODE, 1);
+	OUT_RING(ring, 1);
+
+	gpu->funcs->flush(gpu);
+
+	if (!gpu->funcs->idle(gpu)) {
+		DRM_ERROR("%s: Unable to load GPMU firmware. GPMU will not be active\n",
+			gpu->name);
+		return -EINVAL;
+	}
+
+	gpu_write(gpu, REG_A5XX_GPMU_WFI_CONFIG, 0x4014);
+
+	/* Kick off the GPMU */
+	gpu_write(gpu, REG_A5XX_GPMU_CM3_SYSRESET, 0x0);
+
+	/*
+	 * Wait for the GPMU to respond. It isn't fatal if it doesn't, we just
+	 * won't have advanced power collapse.
+	 */
+	if (spin_usecs(gpu, 25, REG_A5XX_GPMU_GENERAL_0, 0xFFFFFFFF,
+		0xBABEFACE))
+		DRM_ERROR("%s: GPMU firmware initialization timed out\n",
+			gpu->name);
+
+	return 0;
+}
+
+/* Enable limits management */
+static void a5xx_lm_enable(struct msm_gpu *gpu)
+{
+	gpu_write(gpu, REG_A5XX_GDPM_INT_MASK, 0x0);
+	gpu_write(gpu, REG_A5XX_GDPM_INT_EN, 0x0A);
+	gpu_write(gpu, REG_A5XX_GPMU_GPMU_VOLTAGE_INTR_EN_MASK, 0x01);
+	gpu_write(gpu, REG_A5XX_GPMU_TEMP_THRESHOLD_INTR_EN_MASK, 0x50000);
+	gpu_write(gpu, REG_A5XX_GPMU_THROTTLE_UNMASK_FORCE_CTRL, 0x30000);
+
+	gpu_write(gpu, REG_A5XX_GPMU_CLOCK_THROTTLE_CTRL, 0x011);
+}
+
+int a5xx_power_init(struct msm_gpu *gpu)
+{
+	int ret;
+
+	/* Set up the limits management */
+	a5xx_lm_setup(gpu);
+
+	/* Set up SP/TP power collpase */
+	a5xx_pc_init(gpu);
+
+	/* Start the GPMU */
+	ret = a5xx_gpmu_init(gpu);
+	if (ret)
+		return ret;
+
+	/* Start the limits management */
+	a5xx_lm_enable(gpu);
+
+	return 0;
+}
+
+void a5xx_gpmu_ucode_init(struct msm_gpu *gpu)
+{
+	struct adreno_gpu *adreno_gpu = to_adreno_gpu(gpu);
+	struct a5xx_gpu *a5xx_gpu = to_a5xx_gpu(adreno_gpu);
+	struct drm_device *drm = gpu->dev;
+	const struct firmware *fw;
+	uint32_t dwords = 0, offset = 0, bosize;
+	unsigned int *data, *ptr, *cmds;
+	unsigned int cmds_size;
+
+	if (a5xx_gpu->gpmu_bo)
+		return;
+
+	/* Get the firmware */
+	if (request_firmware(&fw, adreno_gpu->info->gpmufw, drm->dev)) {
+		DRM_ERROR("%s: Could not get GPMU firmware. GPMU will not be active\n",
+			gpu->name);
+		return;
+	}
+
+	data = (unsigned int *) fw->data;
+
+	/*
+	 * The first dword is the size of the remaining data in dwords. Use it
+	 * as a checksum of sorts and make sure it matches the actual size of
+	 * the firmware that we read
+	 */
+
+	if (fw->size < 8 || (data[0] < 2) || (data[0] >= (fw->size >> 2)))
+		goto out;
+
+	/* The second dword is an ID - look for 2 (GPMU_FIRMWARE_ID) */
+	if (data[1] != 2)
+		goto out;
+
+	cmds = data + data[2] + 3;
+	cmds_size = data[0] - data[2] - 2;
+
+	/*
+	 * A single type4 opcode can only have so many values attached so
+	 * add enough opcodes to load the all the commands
+	 */
+	bosize = (cmds_size + (cmds_size / TYPE4_MAX_PAYLOAD) + 1) << 2;
+
+	mutex_lock(&drm->struct_mutex);
+	a5xx_gpu->gpmu_bo = msm_gem_new(drm, bosize, MSM_BO_UNCACHED);
+	mutex_unlock(&drm->struct_mutex);
+
+	if (IS_ERR(a5xx_gpu->gpmu_bo))
+		goto err;
+
+	if (msm_gem_get_iova(a5xx_gpu->gpmu_bo, gpu->id, &a5xx_gpu->gpmu_iova))
+		goto err;
+
+	ptr = msm_gem_get_vaddr(a5xx_gpu->gpmu_bo);
+	if (!ptr)
+		goto err;
+
+	while (cmds_size > 0) {
+		int i;
+		uint32_t _size = cmds_size > TYPE4_MAX_PAYLOAD ?
+			TYPE4_MAX_PAYLOAD : cmds_size;
+
+		ptr[dwords++] = PKT4(REG_A5XX_GPMU_INST_RAM_BASE + offset,
+			_size);
+
+		for (i = 0; i < _size; i++)
+			ptr[dwords++] = *cmds++;
+
+		offset += _size;
+		cmds_size -= _size;
+	}
+
+	msm_gem_put_vaddr(a5xx_gpu->gpmu_bo);
+	a5xx_gpu->gpmu_dwords = dwords;
+
+	goto out;
+
+err:
+	if (a5xx_gpu->gpmu_iova)
+		msm_gem_put_iova(a5xx_gpu->gpmu_bo, gpu->id);
+	if (a5xx_gpu->gpmu_bo)
+		drm_gem_object_unreference_unlocked(a5xx_gpu->gpmu_bo);
+
+	a5xx_gpu->gpmu_bo = NULL;
+	a5xx_gpu->gpmu_iova = 0;
+	a5xx_gpu->gpmu_dwords = 0;
+
+out:
+	/* No need to keep that firmware laying around anymore */
+	release_firmware(fw);
+}