diff options
Diffstat (limited to 'drivers/gpu/drm/i915/intel_runtime_pm.c')
| -rw-r--r-- | drivers/gpu/drm/i915/intel_runtime_pm.c | 104 |
1 files changed, 80 insertions, 24 deletions
diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c index 53ea564f971e..53a6eaa9671a 100644 --- a/drivers/gpu/drm/i915/intel_runtime_pm.c +++ b/drivers/gpu/drm/i915/intel_runtime_pm.c @@ -542,6 +542,29 @@ void gen9_sanitize_dc_state(struct drm_i915_private *dev_priv) dev_priv->csr.dc_state = val; } +/** + * gen9_set_dc_state - set target display C power state + * @dev_priv: i915 device instance + * @state: target DC power state + * - DC_STATE_DISABLE + * - DC_STATE_EN_UPTO_DC5 + * - DC_STATE_EN_UPTO_DC6 + * - DC_STATE_EN_DC9 + * + * Signal to DMC firmware/HW the target DC power state passed in @state. + * DMC/HW can turn off individual display clocks and power rails when entering + * a deeper DC power state (higher in number) and turns these back when exiting + * that state to a shallower power state (lower in number). The HW will decide + * when to actually enter a given state on an on-demand basis, for instance + * depending on the active state of display pipes. The state of display + * registers backed by affected power rails are saved/restored as needed. + * + * Based on the above enabling a deeper DC power state is asynchronous wrt. + * enabling it. Disabling a deeper power state is synchronous: for instance + * setting %DC_STATE_DISABLE won't complete until all HW resources are turned + * back on and register state is restored. This is guaranteed by the MMIO write + * to DC_STATE_EN blocking until the state is restored. + */ static void gen9_set_dc_state(struct drm_i915_private *dev_priv, uint32_t state) { uint32_t val; @@ -635,26 +658,18 @@ static void assert_can_enable_dc6(struct drm_i915_private *dev_priv) assert_csr_loaded(dev_priv); } -void skl_enable_dc6(struct drm_i915_private *dev_priv) +static void skl_enable_dc6(struct drm_i915_private *dev_priv) { assert_can_enable_dc6(dev_priv); DRM_DEBUG_KMS("Enabling DC6\n"); - gen9_set_dc_state(dev_priv, DC_STATE_EN_UPTO_DC6); - -} - -void skl_disable_dc6(struct drm_i915_private *dev_priv) -{ - DRM_DEBUG_KMS("Disabling DC6\n"); - /* Wa Display #1183: skl,kbl,cfl */ if (IS_GEN9_BC(dev_priv)) I915_WRITE(GEN8_CHICKEN_DCPR_1, I915_READ(GEN8_CHICKEN_DCPR_1) | SKL_SELECT_ALTERNATE_DC_EXIT); - gen9_set_dc_state(dev_priv, DC_STATE_DISABLE); + gen9_set_dc_state(dev_priv, DC_STATE_EN_UPTO_DC6); } static void hsw_power_well_sync_hw(struct drm_i915_private *dev_priv, @@ -2627,32 +2642,69 @@ static void intel_power_domains_sync_hw(struct drm_i915_private *dev_priv) mutex_unlock(&power_domains->lock); } -static void gen9_dbuf_enable(struct drm_i915_private *dev_priv) +static inline +bool intel_dbuf_slice_set(struct drm_i915_private *dev_priv, + i915_reg_t reg, bool enable) { - I915_WRITE(DBUF_CTL, I915_READ(DBUF_CTL) | DBUF_POWER_REQUEST); - POSTING_READ(DBUF_CTL); + u32 val, status; + val = I915_READ(reg); + val = enable ? (val | DBUF_POWER_REQUEST) : (val & ~DBUF_POWER_REQUEST); + I915_WRITE(reg, val); + POSTING_READ(reg); udelay(10); - if (!(I915_READ(DBUF_CTL) & DBUF_POWER_STATE)) - DRM_ERROR("DBuf power enable timeout\n"); + status = I915_READ(reg) & DBUF_POWER_STATE; + if ((enable && !status) || (!enable && status)) { + DRM_ERROR("DBus power %s timeout!\n", + enable ? "enable" : "disable"); + return false; + } + return true; +} + +static void gen9_dbuf_enable(struct drm_i915_private *dev_priv) +{ + intel_dbuf_slice_set(dev_priv, DBUF_CTL, true); } static void gen9_dbuf_disable(struct drm_i915_private *dev_priv) { - I915_WRITE(DBUF_CTL, I915_READ(DBUF_CTL) & ~DBUF_POWER_REQUEST); - POSTING_READ(DBUF_CTL); + intel_dbuf_slice_set(dev_priv, DBUF_CTL, false); +} - udelay(10); +static u8 intel_dbuf_max_slices(struct drm_i915_private *dev_priv) +{ + if (INTEL_GEN(dev_priv) < 11) + return 1; + return 2; +} - if (I915_READ(DBUF_CTL) & DBUF_POWER_STATE) - DRM_ERROR("DBuf power disable timeout!\n"); +void icl_dbuf_slices_update(struct drm_i915_private *dev_priv, + u8 req_slices) +{ + u8 hw_enabled_slices = dev_priv->wm.skl_hw.ddb.enabled_slices; + u32 val; + bool ret; + + if (req_slices > intel_dbuf_max_slices(dev_priv)) { + DRM_ERROR("Invalid number of dbuf slices requested\n"); + return; + } + + if (req_slices == hw_enabled_slices || req_slices == 0) + return; + + val = I915_READ(DBUF_CTL_S2); + if (req_slices > hw_enabled_slices) + ret = intel_dbuf_slice_set(dev_priv, DBUF_CTL_S2, true); + else + ret = intel_dbuf_slice_set(dev_priv, DBUF_CTL_S2, false); + + if (ret) + dev_priv->wm.skl_hw.ddb.enabled_slices = req_slices; } -/* - * TODO: we shouldn't always enable DBUF_CTL_S2, we should only enable it when - * needed and keep it disabled as much as possible. - */ static void icl_dbuf_enable(struct drm_i915_private *dev_priv) { I915_WRITE(DBUF_CTL_S1, I915_READ(DBUF_CTL_S1) | DBUF_POWER_REQUEST); @@ -2664,6 +2716,8 @@ static void icl_dbuf_enable(struct drm_i915_private *dev_priv) if (!(I915_READ(DBUF_CTL_S1) & DBUF_POWER_STATE) || !(I915_READ(DBUF_CTL_S2) & DBUF_POWER_STATE)) DRM_ERROR("DBuf power enable timeout\n"); + else + dev_priv->wm.skl_hw.ddb.enabled_slices = 2; } static void icl_dbuf_disable(struct drm_i915_private *dev_priv) @@ -2677,6 +2731,8 @@ static void icl_dbuf_disable(struct drm_i915_private *dev_priv) if ((I915_READ(DBUF_CTL_S1) & DBUF_POWER_STATE) || (I915_READ(DBUF_CTL_S2) & DBUF_POWER_STATE)) DRM_ERROR("DBuf power disable timeout!\n"); + else + dev_priv->wm.skl_hw.ddb.enabled_slices = 0; } static void icl_mbus_init(struct drm_i915_private *dev_priv) |