diff options
Diffstat (limited to 'drivers/gpu/drm/i915/intel_display.c')
| -rw-r--r-- | drivers/gpu/drm/i915/intel_display.c | 4289 |
1 files changed, 2201 insertions, 2088 deletions
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 647b1404c441..8cc9264f7809 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -86,9 +86,6 @@ static void i9xx_crtc_clock_get(struct intel_crtc *crtc, static void ironlake_pch_clock_get(struct intel_crtc *crtc, struct intel_crtc_state *pipe_config); -static int intel_set_mode(struct drm_crtc *crtc, - struct drm_atomic_state *state, - bool force_restore); static int intel_framebuffer_init(struct drm_device *dev, struct intel_framebuffer *ifb, struct drm_mode_fb_cmd2 *mode_cmd, @@ -105,22 +102,13 @@ static void vlv_prepare_pll(struct intel_crtc *crtc, const struct intel_crtc_state *pipe_config); static void chv_prepare_pll(struct intel_crtc *crtc, const struct intel_crtc_state *pipe_config); -static void intel_begin_crtc_commit(struct drm_crtc *crtc); -static void intel_finish_crtc_commit(struct drm_crtc *crtc); +static void intel_begin_crtc_commit(struct drm_crtc *, struct drm_crtc_state *); +static void intel_finish_crtc_commit(struct drm_crtc *, struct drm_crtc_state *); static void skl_init_scalers(struct drm_device *dev, struct intel_crtc *intel_crtc, struct intel_crtc_state *crtc_state); static int i9xx_get_refclk(const struct intel_crtc_state *crtc_state, int num_connectors); -static void intel_crtc_enable_planes(struct drm_crtc *crtc); -static void intel_crtc_disable_planes(struct drm_crtc *crtc); - -static struct intel_encoder *intel_find_encoder(struct intel_connector *connector, int pipe) -{ - if (!connector->mst_port) - return connector->encoder; - else - return &connector->mst_port->mst_encoders[pipe]->base; -} +static void intel_modeset_setup_hw_state(struct drm_device *dev); typedef struct { int min, max; @@ -413,7 +401,7 @@ static const intel_limit_t intel_limits_chv = { static const intel_limit_t intel_limits_bxt = { /* FIXME: find real dot limits */ .dot = { .min = 0, .max = INT_MAX }, - .vco = { .min = 4800000, .max = 6480000 }, + .vco = { .min = 4800000, .max = 6700000 }, .n = { .min = 1, .max = 1 }, .m1 = { .min = 2, .max = 2 }, /* FIXME: find real m2 limits */ @@ -422,14 +410,10 @@ static const intel_limit_t intel_limits_bxt = { .p2 = { .p2_slow = 1, .p2_fast = 20 }, }; -static void vlv_clock(int refclk, intel_clock_t *clock) +static bool +needs_modeset(struct drm_crtc_state *state) { - clock->m = clock->m1 * clock->m2; - clock->p = clock->p1 * clock->p2; - if (WARN_ON(clock->n == 0 || clock->p == 0)) - return; - clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n); - clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p); + return drm_atomic_crtc_needs_modeset(state); } /** @@ -561,15 +545,25 @@ intel_limit(struct intel_crtc_state *crtc_state, int refclk) return limit; } +/* + * Platform specific helpers to calculate the port PLL loopback- (clock.m), + * and post-divider (clock.p) values, pre- (clock.vco) and post-divided fast + * (clock.dot) clock rates. This fast dot clock is fed to the port's IO logic. + * The helpers' return value is the rate of the clock that is fed to the + * display engine's pipe which can be the above fast dot clock rate or a + * divided-down version of it. + */ /* m1 is reserved as 0 in Pineview, n is a ring counter */ -static void pineview_clock(int refclk, intel_clock_t *clock) +static int pnv_calc_dpll_params(int refclk, intel_clock_t *clock) { clock->m = clock->m2 + 2; clock->p = clock->p1 * clock->p2; if (WARN_ON(clock->n == 0 || clock->p == 0)) - return; + return 0; clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n); clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p); + + return clock->dot; } static uint32_t i9xx_dpll_compute_m(struct dpll *dpll) @@ -577,25 +571,41 @@ static uint32_t i9xx_dpll_compute_m(struct dpll *dpll) return 5 * (dpll->m1 + 2) + (dpll->m2 + 2); } -static void i9xx_clock(int refclk, intel_clock_t *clock) +static int i9xx_calc_dpll_params(int refclk, intel_clock_t *clock) { clock->m = i9xx_dpll_compute_m(clock); clock->p = clock->p1 * clock->p2; if (WARN_ON(clock->n + 2 == 0 || clock->p == 0)) - return; + return 0; clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n + 2); clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p); + + return clock->dot; } -static void chv_clock(int refclk, intel_clock_t *clock) +static int vlv_calc_dpll_params(int refclk, intel_clock_t *clock) { clock->m = clock->m1 * clock->m2; clock->p = clock->p1 * clock->p2; if (WARN_ON(clock->n == 0 || clock->p == 0)) - return; + return 0; + clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n); + clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p); + + return clock->dot / 5; +} + +int chv_calc_dpll_params(int refclk, intel_clock_t *clock) +{ + clock->m = clock->m1 * clock->m2; + clock->p = clock->p1 * clock->p2; + if (WARN_ON(clock->n == 0 || clock->p == 0)) + return 0; clock->vco = DIV_ROUND_CLOSEST_ULL((uint64_t)refclk * clock->m, clock->n << 22); clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p); + + return clock->dot / 5; } #define INTELPllInvalid(s) do { /* DRM_DEBUG(s); */ return false; } while (0) @@ -639,16 +649,12 @@ static bool intel_PLL_is_valid(struct drm_device *dev, return true; } -static bool -i9xx_find_best_dpll(const intel_limit_t *limit, - struct intel_crtc_state *crtc_state, - int target, int refclk, intel_clock_t *match_clock, - intel_clock_t *best_clock) +static int +i9xx_select_p2_div(const intel_limit_t *limit, + const struct intel_crtc_state *crtc_state, + int target) { - struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc); - struct drm_device *dev = crtc->base.dev; - intel_clock_t clock; - int err = target; + struct drm_device *dev = crtc_state->base.crtc->dev; if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS)) { /* @@ -657,18 +663,31 @@ i9xx_find_best_dpll(const intel_limit_t *limit, * single/dual channel state, if we even can. */ if (intel_is_dual_link_lvds(dev)) - clock.p2 = limit->p2.p2_fast; + return limit->p2.p2_fast; else - clock.p2 = limit->p2.p2_slow; + return limit->p2.p2_slow; } else { if (target < limit->p2.dot_limit) - clock.p2 = limit->p2.p2_slow; + return limit->p2.p2_slow; else - clock.p2 = limit->p2.p2_fast; + return limit->p2.p2_fast; } +} + +static bool +i9xx_find_best_dpll(const intel_limit_t *limit, + struct intel_crtc_state *crtc_state, + int target, int refclk, intel_clock_t *match_clock, + intel_clock_t *best_clock) +{ + struct drm_device *dev = crtc_state->base.crtc->dev; + intel_clock_t clock; + int err = target; memset(best_clock, 0, sizeof(*best_clock)); + clock.p2 = i9xx_select_p2_div(limit, crtc_state, target); + for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; clock.m1++) { for (clock.m2 = limit->m2.min; @@ -681,7 +700,7 @@ i9xx_find_best_dpll(const intel_limit_t *limit, clock.p1 <= limit->p1.max; clock.p1++) { int this_err; - i9xx_clock(refclk, &clock); + i9xx_calc_dpll_params(refclk, &clock); if (!intel_PLL_is_valid(dev, limit, &clock)) continue; @@ -708,30 +727,14 @@ pnv_find_best_dpll(const intel_limit_t *limit, int target, int refclk, intel_clock_t *match_clock, intel_clock_t *best_clock) { - struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc); - struct drm_device *dev = crtc->base.dev; + struct drm_device *dev = crtc_state->base.crtc->dev; intel_clock_t clock; int err = target; - if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS)) { - /* - * For LVDS just rely on its current settings for dual-channel. - * We haven't figured out how to reliably set up different - * single/dual channel state, if we even can. - */ - if (intel_is_dual_link_lvds(dev)) - clock.p2 = limit->p2.p2_fast; - else - clock.p2 = limit->p2.p2_slow; - } else { - if (target < limit->p2.dot_limit) - clock.p2 = limit->p2.p2_slow; - else - clock.p2 = limit->p2.p2_fast; - } - memset(best_clock, 0, sizeof(*best_clock)); + clock.p2 = i9xx_select_p2_div(limit, crtc_state, target); + for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; clock.m1++) { for (clock.m2 = limit->m2.min; @@ -742,7 +745,7 @@ pnv_find_best_dpll(const intel_limit_t *limit, clock.p1 <= limit->p1.max; clock.p1++) { int this_err; - pineview_clock(refclk, &clock); + pnv_calc_dpll_params(refclk, &clock); if (!intel_PLL_is_valid(dev, limit, &clock)) continue; @@ -769,28 +772,17 @@ g4x_find_best_dpll(const intel_limit_t *limit, int target, int refclk, intel_clock_t *match_clock, intel_clock_t *best_clock) { - struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc); - struct drm_device *dev = crtc->base.dev; + struct drm_device *dev = crtc_state->base.crtc->dev; intel_clock_t clock; int max_n; - bool found; + bool found = false; /* approximately equals target * 0.00585 */ int err_most = (target >> 8) + (target >> 9); - found = false; - - if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS)) { - if (intel_is_dual_link_lvds(dev)) - clock.p2 = limit->p2.p2_fast; - else - clock.p2 = limit->p2.p2_slow; - } else { - if (target < limit->p2.dot_limit) - clock.p2 = limit->p2.p2_slow; - else - clock.p2 = limit->p2.p2_fast; - } memset(best_clock, 0, sizeof(*best_clock)); + + clock.p2 = i9xx_select_p2_div(limit, crtc_state, target); + max_n = limit->n.max; /* based on hardware requirement, prefer smaller n to precision */ for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) { @@ -803,7 +795,7 @@ g4x_find_best_dpll(const intel_limit_t *limit, clock.p1 >= limit->p1.min; clock.p1--) { int this_err; - i9xx_clock(refclk, &clock); + i9xx_calc_dpll_params(refclk, &clock); if (!intel_PLL_is_valid(dev, limit, &clock)) continue; @@ -893,7 +885,7 @@ vlv_find_best_dpll(const intel_limit_t *limit, clock.m2 = DIV_ROUND_CLOSEST(target * clock.p * clock.n, refclk * clock.m1); - vlv_clock(refclk, &clock); + vlv_calc_dpll_params(refclk, &clock); if (!intel_PLL_is_valid(dev, limit, &clock)) @@ -956,7 +948,7 @@ chv_find_best_dpll(const intel_limit_t *limit, clock.m2 = m2; - chv_clock(refclk, &clock); + chv_calc_dpll_params(refclk, &clock); if (!intel_PLL_is_valid(dev, limit, &clock)) continue; @@ -1026,7 +1018,7 @@ static bool pipe_dsl_stopped(struct drm_device *dev, enum pipe pipe) line_mask = DSL_LINEMASK_GEN3; line1 = I915_READ(reg) & line_mask; - mdelay(5); + msleep(5); line2 = I915_READ(reg) & line_mask; return line1 == line2; @@ -1106,6 +1098,9 @@ bool ibx_digital_port_connected(struct drm_i915_private *dev_priv, case PORT_D: bit = SDE_PORTD_HOTPLUG_CPT; break; + case PORT_E: + bit = SDE_PORTE_HOTPLUG_SPT; + break; default: return true; } @@ -1694,7 +1689,7 @@ static int intel_num_dvo_pipes(struct drm_device *dev) int count = 0; for_each_intel_crtc(dev, crtc) - count += crtc->active && + count += crtc->base.state->active && intel_pipe_has_type(crtc, INTEL_OUTPUT_DVO); return count; @@ -1775,7 +1770,7 @@ static void i9xx_disable_pll(struct intel_crtc *crtc) /* Disable DVO 2x clock on both PLLs if necessary */ if (IS_I830(dev) && intel_pipe_has_type(crtc, INTEL_OUTPUT_DVO) && - intel_num_dvo_pipes(dev) == 1) { + !intel_num_dvo_pipes(dev)) { I915_WRITE(DPLL(PIPE_B), I915_READ(DPLL(PIPE_B)) & ~DPLL_DVO_2X_MODE); I915_WRITE(DPLL(PIPE_A), @@ -1790,13 +1785,13 @@ static void i9xx_disable_pll(struct intel_crtc *crtc) /* Make sure the pipe isn't still relying on us */ assert_pipe_disabled(dev_priv, pipe); - I915_WRITE(DPLL(pipe), 0); + I915_WRITE(DPLL(pipe), DPLL_VGA_MODE_DIS); POSTING_READ(DPLL(pipe)); } static void vlv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe) { - u32 val = 0; + u32 val; /* Make sure the pipe isn't still relying on us */ assert_pipe_disabled(dev_priv, pipe); @@ -1805,8 +1800,9 @@ static void vlv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe) * Leave integrated clock source and reference clock enabled for pipe B. * The latter is needed for VGA hotplug / manual detection. */ + val = DPLL_VGA_MODE_DIS; if (pipe == PIPE_B) - val = DPLL_INTEGRATED_CRI_CLK_VLV | DPLL_REFA_CLK_ENABLE_VLV; + val = DPLL_INTEGRATED_CRI_CLK_VLV | DPLL_REF_CLK_ENABLE_VLV; I915_WRITE(DPLL(pipe), val); POSTING_READ(DPLL(pipe)); @@ -1821,7 +1817,8 @@ static void chv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe) assert_pipe_disabled(dev_priv, pipe); /* Set PLL en = 0 */ - val = DPLL_SSC_REF_CLOCK_CHV | DPLL_REFA_CLK_ENABLE_VLV; + val = DPLL_SSC_REF_CLK_CHV | + DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS; if (pipe != PIPE_A) val |= DPLL_INTEGRATED_CRI_CLK_VLV; I915_WRITE(DPLL(pipe), val); @@ -1942,11 +1939,13 @@ static void intel_disable_shared_dpll(struct intel_crtc *crtc) struct intel_shared_dpll *pll = intel_crtc_to_shared_dpll(crtc); /* PCH only available on ILK+ */ - BUG_ON(INTEL_INFO(dev)->gen < 5); - if (WARN_ON(pll == NULL)) - return; + if (INTEL_INFO(dev)->gen < 5) + return; - if (WARN_ON(pll->config.crtc_mask == 0)) + if (pll == NULL) + return; + + if (WARN_ON(!(pll->config.crtc_mask & (1 << drm_crtc_index(&crtc->base))))) return; DRM_DEBUG_KMS("disable %s (active %d, on? %d) for crtc %d\n", @@ -2004,11 +2003,15 @@ static void ironlake_enable_pch_transcoder(struct drm_i915_private *dev_priv, if (HAS_PCH_IBX(dev_priv->dev)) { /* - * make the BPC in transcoder be consistent with - * that in pipeconf reg. + * Make the BPC in transcoder be consistent with + * that in pipeconf reg. For HDMI we must use 8bpc + * here for both 8bpc and 12bpc. */ val &= ~PIPECONF_BPC_MASK; - val |= pipeconf_val & PIPECONF_BPC_MASK; + if (intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_HDMI)) + val |= PIPECONF_8BPC; + else + val |= pipeconf_val & PIPECONF_BPC_MASK; } val &= ~TRANS_INTERLACE_MASK; @@ -2122,6 +2125,8 @@ static void intel_enable_pipe(struct intel_crtc *crtc) int reg; u32 val; + DRM_DEBUG_KMS("enabling pipe %c\n", pipe_name(pipe)); + assert_planes_disabled(dev_priv, pipe); assert_cursor_disabled(dev_priv, pipe); assert_sprites_disabled(dev_priv, pipe); @@ -2181,6 +2186,8 @@ static void intel_disable_pipe(struct intel_crtc *crtc) int reg; u32 val; + DRM_DEBUG_KMS("disabling pipe %c\n", pipe_name(pipe)); + /* * Make sure planes won't keep trying to pump pixels to us, * or we might hang the display. @@ -2211,28 +2218,6 @@ static void intel_disable_pipe(struct intel_crtc *crtc) intel_wait_for_pipe_off(crtc); } -/** - * intel_enable_primary_hw_plane - enable the primary plane on a given pipe - * @plane: plane to be enabled - * @crtc: crtc for the plane - * - * Enable @plane on @crtc, making sure that the pipe is running first. - */ -static void intel_enable_primary_hw_plane(struct drm_plane *plane, - struct drm_crtc *crtc) -{ - struct drm_device *dev = plane->dev; - struct drm_i915_private *dev_priv = dev->dev_private; - struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - - /* If the pipe isn't enabled, we can't pump pixels and may hang */ - assert_pipe_enabled(dev_priv, intel_crtc->pipe); - to_intel_plane_state(plane->state)->visible = true; - - dev_priv->display.update_primary_plane(crtc, plane->fb, - crtc->x, crtc->y); -} - static bool need_vtd_wa(struct drm_device *dev) { #ifdef CONFIG_INTEL_IOMMU @@ -2302,6 +2287,7 @@ intel_fill_fb_ggtt_view(struct i915_ggtt_view *view, struct drm_framebuffer *fb, const struct drm_plane_state *plane_state) { struct intel_rotation_info *info = &view->rotation_info; + unsigned int tile_height, tile_pitch; *view = i915_ggtt_view_normal; @@ -2318,14 +2304,35 @@ intel_fill_fb_ggtt_view(struct i915_ggtt_view *view, struct drm_framebuffer *fb, info->pitch = fb->pitches[0]; info->fb_modifier = fb->modifier[0]; + tile_height = intel_tile_height(fb->dev, fb->pixel_format, + fb->modifier[0]); + tile_pitch = PAGE_SIZE / tile_height; + info->width_pages = DIV_ROUND_UP(fb->pitches[0], tile_pitch); + info->height_pages = DIV_ROUND_UP(fb->height, tile_height); + info->size = info->width_pages * info->height_pages * PAGE_SIZE; + return 0; } +static unsigned int intel_linear_alignment(struct drm_i915_private *dev_priv) +{ + if (INTEL_INFO(dev_priv)->gen >= 9) + return 256 * 1024; + else if (IS_BROADWATER(dev_priv) || IS_CRESTLINE(dev_priv) || + IS_VALLEYVIEW(dev_priv)) + return 128 * 1024; + else if (INTEL_INFO(dev_priv)->gen >= 4) + return 4 * 1024; + else + return 0; +} + int intel_pin_and_fence_fb_obj(struct drm_plane *plane, struct drm_framebuffer *fb, const struct drm_plane_state *plane_state, - struct intel_engine_cs *pipelined) + struct intel_engine_cs *pipelined, + struct drm_i915_gem_request **pipelined_request) { struct drm_device *dev = fb->dev; struct drm_i915_private *dev_priv = dev->dev_private; @@ -2338,14 +2345,7 @@ intel_pin_and_fence_fb_obj(struct drm_plane *plane, switch (fb->modifier[0]) { case DRM_FORMAT_MOD_NONE: - if (INTEL_INFO(dev)->gen >= 9) - alignment = 256 * 1024; - else if (IS_BROADWATER(dev) || IS_CRESTLINE(dev)) - alignment = 128 * 1024; - else if (INTEL_INFO(dev)->gen >= 4) - alignment = 4 * 1024; - else - alignment = 64 * 1024; + alignment = intel_linear_alignment(dev_priv); break; case I915_FORMAT_MOD_X_TILED: if (INTEL_INFO(dev)->gen >= 9) @@ -2390,7 +2390,7 @@ intel_pin_and_fence_fb_obj(struct drm_plane *plane, dev_priv->mm.interruptible = false; ret = i915_gem_object_pin_to_display_plane(obj, alignment, pipelined, - &view); + pipelined_request, &view); if (ret) goto err_interruptible; @@ -2400,7 +2400,18 @@ intel_pin_and_fence_fb_obj(struct drm_plane *plane, * a fence as the cost is not that onerous. */ ret = i915_gem_object_get_fence(obj); - if (ret) + if (ret == -EDEADLK) { + /* + * -EDEADLK means there are no free fences + * no pending flips. + * + * This is propagated to atomic, but it uses + * -EDEADLK to force a locking recovery, so + * change the returned error to -EBUSY. + */ + ret = -EBUSY; + goto err_unpin; + } else if (ret) goto err_unpin; i915_gem_object_pin_fence(obj); @@ -2435,7 +2446,8 @@ static void intel_unpin_fb_obj(struct drm_framebuffer *fb, /* Computes the linear offset to the base tile and adjusts x, y. bytes per pixel * is assumed to be a power-of-two. */ -unsigned long intel_gen4_compute_page_offset(int *x, int *y, +unsigned long intel_gen4_compute_page_offset(struct drm_i915_private *dev_priv, + int *x, int *y, unsigned int tiling_mode, unsigned int cpp, unsigned int pitch) @@ -2451,12 +2463,13 @@ unsigned long intel_gen4_compute_page_offset(int *x, int *y, return tile_rows * pitch * 8 + tiles * 4096; } else { + unsigned int alignment = intel_linear_alignment(dev_priv) - 1; unsigned int offset; offset = *y * pitch + *x * cpp; - *y = 0; - *x = (offset & 4095) / cpp; - return offset & -4096; + *y = (offset & alignment) / pitch; + *x = ((offset & alignment) - *y * pitch) / cpp; + return offset & ~alignment; } } @@ -2583,6 +2596,7 @@ intel_find_initial_plane_obj(struct intel_crtc *intel_crtc, struct intel_crtc *i; struct drm_i915_gem_object *obj; struct drm_plane *primary = intel_crtc->base.primary; + struct drm_plane_state *plane_state = primary->state; struct drm_framebuffer *fb; if (!plane_config->fb) @@ -2622,15 +2636,23 @@ intel_find_initial_plane_obj(struct intel_crtc *intel_crtc, return; valid_fb: + plane_state->src_x = plane_state->src_y = 0; + plane_state->src_w = fb->width << 16; + plane_state->src_h = fb->height << 16; + + plane_state->crtc_x = plane_state->src_y = 0; + plane_state->crtc_w = fb->width; + plane_state->crtc_h = fb->height; + obj = intel_fb_obj(fb); if (obj->tiling_mode != I915_TILING_NONE) dev_priv->preserve_bios_swizzle = true; - primary->fb = fb; - primary->state->crtc = &intel_crtc->base; - primary->crtc = &intel_crtc->base; - update_state_fb(primary); - obj->frontbuffer_bits |= INTEL_FRONTBUFFER_PRIMARY(intel_crtc->pipe); + drm_framebuffer_reference(fb); + primary->fb = primary->state->fb = fb; + primary->crtc = primary->state->crtc = &intel_crtc->base; + intel_crtc->base.state->plane_mask |= (1 << drm_plane_index(primary)); + obj->frontbuffer_bits |= to_intel_plane(primary)->frontbuffer_bit; } static void i9xx_update_primary_plane(struct drm_crtc *crtc, @@ -2725,7 +2747,8 @@ static void i9xx_update_primary_plane(struct drm_crtc *crtc, if (INTEL_INFO(dev)->gen >= 4) { intel_crtc->dspaddr_offset = - intel_gen4_compute_page_offset(&x, &y, obj->tiling_mode, + intel_gen4_compute_page_offset(dev_priv, + &x, &y, obj->tiling_mode, pixel_size, fb->pitches[0]); linear_offset -= intel_crtc->dspaddr_offset; @@ -2826,7 +2849,8 @@ static void ironlake_update_primary_plane(struct drm_crtc *crtc, linear_offset = y * fb->pitches[0] + x * pixel_size; intel_crtc->dspaddr_offset = - intel_gen4_compute_page_offset(&x, &y, obj->tiling_mode, + intel_gen4_compute_page_offset(dev_priv, + &x, &y, obj->tiling_mode, pixel_size, fb->pitches[0]); linear_offset -= intel_crtc->dspaddr_offset; @@ -2904,32 +2928,32 @@ unsigned long intel_plane_obj_offset(struct intel_plane *intel_plane, return i915_gem_obj_ggtt_offset_view(obj, view); } +static void skl_detach_scaler(struct intel_crtc *intel_crtc, int id) +{ + struct drm_device *dev = intel_crtc->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + + I915_WRITE(SKL_PS_CTRL(intel_crtc->pipe, id), 0); + I915_WRITE(SKL_PS_WIN_POS(intel_crtc->pipe, id), 0); + I915_WRITE(SKL_PS_WIN_SZ(intel_crtc->pipe, id), 0); + DRM_DEBUG_KMS("CRTC:%d Disabled scaler id %u.%u\n", + intel_crtc->base.base.id, intel_crtc->pipe, id); +} + /* * This function detaches (aka. unbinds) unused scalers in hardware */ -void skl_detach_scalers(struct intel_crtc *intel_crtc) +static void skl_detach_scalers(struct intel_crtc *intel_crtc) { - struct drm_device *dev; - struct drm_i915_private *dev_priv; struct intel_crtc_scaler_state *scaler_state; int i; - if (!intel_crtc || !intel_crtc->config) - return; - - dev = intel_crtc->base.dev; - dev_priv = dev->dev_private; scaler_state = &intel_crtc->config->scaler_state; /* loop through and disable scalers that aren't in use */ for (i = 0; i < intel_crtc->num_scalers; i++) { - if (!scaler_state->scalers[i].in_use) { - I915_WRITE(SKL_PS_CTRL(intel_crtc->pipe, i), 0); - I915_WRITE(SKL_PS_WIN_POS(intel_crtc->pipe, i), 0); - I915_WRITE(SKL_PS_WIN_SZ(intel_crtc->pipe, i), 0); - DRM_DEBUG_KMS("CRTC:%d Disabled scaler id %u.%u\n", - intel_crtc->base.base.id, intel_crtc->pipe, i); - } + if (!scaler_state->scalers[i].in_use) + skl_detach_scaler(intel_crtc, i); } } @@ -3132,8 +3156,8 @@ intel_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb, struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; - if (dev_priv->display.disable_fbc) - dev_priv->display.disable_fbc(dev); + if (dev_priv->fbc.disable_fbc) + dev_priv->fbc.disable_fbc(dev_priv); dev_priv->display.update_primary_plane(crtc, fb, x, y); @@ -3176,24 +3200,8 @@ static void intel_update_primary_planes(struct drm_device *dev) } } -void intel_crtc_reset(struct intel_crtc *crtc) -{ - struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); - - if (!crtc->active) - return; - - intel_crtc_disable_planes(&crtc->base); - dev_priv->display.crtc_disable(&crtc->base); - dev_priv->display.crtc_enable(&crtc->base); - intel_crtc_enable_planes(&crtc->base); -} - void intel_prepare_reset(struct drm_device *dev) { - struct drm_i915_private *dev_priv = to_i915(dev); - struct intel_crtc *crtc; - /* no reset support for gen2 */ if (IS_GEN2(dev)) return; @@ -3203,18 +3211,11 @@ void intel_prepare_reset(struct drm_device *dev) return; drm_modeset_lock_all(dev); - /* * Disabling the crtcs gracefully seems nicer. Also the * g33 docs say we should at least disable all the planes. */ - for_each_intel_crtc(dev, crtc) { - if (!crtc->active) - continue; - - intel_crtc_disable_planes(&crtc->base); - dev_priv->display.crtc_disable(&crtc->base); - } + intel_display_suspend(dev); } void intel_finish_reset(struct drm_device *dev) @@ -3258,7 +3259,7 @@ void intel_finish_reset(struct drm_device *dev) dev_priv->display.hpd_irq_setup(dev); spin_unlock_irq(&dev_priv->irq_lock); - intel_modeset_setup_hw_state(dev, true); + intel_display_resume(dev); intel_hpd_init(dev_priv); @@ -4200,34 +4201,16 @@ static void lpt_pch_enable(struct drm_crtc *crtc) lpt_enable_pch_transcoder(dev_priv, cpu_transcoder); } -void intel_put_shared_dpll(struct intel_crtc *crtc) -{ - struct intel_shared_dpll *pll = intel_crtc_to_shared_dpll(crtc); - - if (pll == NULL) - return; - - if (!(pll->config.crtc_mask & (1 << crtc->pipe))) { - WARN(1, "bad %s crtc mask\n", pll->name); - return; - } - - pll->config.crtc_mask &= ~(1 << crtc->pipe); - if (pll->config.crtc_mask == 0) { - WARN_ON(pll->on); - WARN_ON(pll->active); - } - - crtc->config->shared_dpll = DPLL_ID_PRIVATE; -} - struct intel_shared_dpll *intel_get_shared_dpll(struct intel_crtc *crtc, struct intel_crtc_state *crtc_state) { struct drm_i915_private *dev_priv = crtc->base.dev->dev_private; struct intel_shared_dpll *pll; + struct intel_shared_dpll_config *shared_dpll; enum intel_dpll_id i; + shared_dpll = intel_atomic_get_shared_dpll_state(crtc_state->base.state); + if (HAS_PCH_IBX(dev_priv->dev)) { /* Ironlake PCH has a fixed PLL->PCH pipe mapping. */ i = (enum intel_dpll_id) crtc->pipe; @@ -4236,7 +4219,7 @@ struct intel_shared_dpll *intel_get_shared_dpll(struct intel_crtc *crtc, DRM_DEBUG_KMS("CRTC:%d using pre-allocated %s\n", crtc->base.base.id, pll->name); - WARN_ON(pll->new_config->crtc_mask); + WARN_ON(shared_dpll[i].crtc_mask); goto found; } @@ -4256,7 +4239,7 @@ struct intel_shared_dpll *intel_get_shared_dpll(struct intel_crtc *crtc, pll = &dev_priv->shared_dplls[i]; DRM_DEBUG_KMS("CRTC:%d using pre-allocated %s\n", crtc->base.base.id, pll->name); - WARN_ON(pll->new_config->crtc_mask); + WARN_ON(shared_dpll[i].crtc_mask); goto found; } @@ -4265,15 +4248,15 @@ struct intel_shared_dpll *intel_get_shared_dpll(struct intel_crtc *crtc, pll = &dev_priv->shared_dplls[i]; /* Only want to check enabled timings first */ - if (pll->new_config->crtc_mask == 0) + if (shared_dpll[i].crtc_mask == 0) continue; if (memcmp(&crtc_state->dpll_hw_state, - &pll->new_config->hw_state, - sizeof(pll->new_config->hw_state)) == 0) { + &shared_dpll[i].hw_state, + sizeof(crtc_state->dpll_hw_state)) == 0) { DRM_DEBUG_KMS("CRTC:%d sharing existing %s (crtc mask 0x%08x, ative %d)\n", crtc->base.base.id, pll->name, - pll->new_config->crtc_mask, + shared_dpll[i].crtc_mask, pll->active); goto found; } @@ -4282,7 +4265,7 @@ struct intel_shared_dpll *intel_get_shared_dpll(struct intel_crtc *crtc, /* Ok no matching timings, maybe there's a free one? */ for (i = 0; i < dev_priv->num_shared_dpll; i++) { pll = &dev_priv->shared_dplls[i]; - if (pll->new_config->crtc_mask == 0) { + if (shared_dpll[i].crtc_mask == 0) { DRM_DEBUG_KMS("CRTC:%d allocated %s\n", crtc->base.base.id, pll->name); goto found; @@ -4292,83 +4275,33 @@ struct intel_shared_dpll *intel_get_shared_dpll(struct intel_crtc *crtc, return NULL; found: - if (pll->new_config->crtc_mask == 0) - pll->new_config->hw_state = crtc_state->dpll_hw_state; + if (shared_dpll[i].crtc_mask == 0) + shared_dpll[i].hw_state = + crtc_state->dpll_hw_state; crtc_state->shared_dpll = i; DRM_DEBUG_DRIVER("using %s for pipe %c\n", pll->name, pipe_name(crtc->pipe)); - pll->new_config->crtc_mask |= 1 << crtc->pipe; + shared_dpll[i].crtc_mask |= 1 << crtc->pipe; return pll; } -/** - * intel_shared_dpll_start_config - start a new PLL staged config - * @dev_priv: DRM device - * @clear_pipes: mask of pipes that will have their PLLs freed - * - * Starts a new PLL staged config, copying the current config but - * releasing the references of pipes specified in clear_pipes. - */ -static int intel_shared_dpll_start_config(struct drm_i915_private *dev_priv, - unsigned clear_pipes) -{ - struct intel_shared_dpll *pll; - enum intel_dpll_id i; - - for (i = 0; i < dev_priv->num_shared_dpll; i++) { - pll = &dev_priv->shared_dplls[i]; - - pll->new_config = kmemdup(&pll->config, sizeof pll->config, - GFP_KERNEL); - if (!pll->new_config) - goto cleanup; - - pll->new_config->crtc_mask &= ~clear_pipes; - } - - return 0; - -cleanup: - while (--i >= 0) { - pll = &dev_priv->shared_dplls[i]; - kfree(pll->new_config); - pll->new_config = NULL; - } - - return -ENOMEM; -} - -static void intel_shared_dpll_commit(struct drm_i915_private *dev_priv) +static void intel_shared_dpll_commit(struct drm_atomic_state *state) { + struct drm_i915_private *dev_priv = to_i915(state->dev); + struct intel_shared_dpll_config *shared_dpll; struct intel_shared_dpll *pll; enum intel_dpll_id i; - for (i = 0; i < dev_priv->num_shared_dpll; i++) { - pll = &dev_priv->shared_dplls[i]; - - WARN_ON(pll->new_config == &pll->config); - - pll->config = *pll->new_config; - kfree(pll->new_config); - pll->new_config = NULL; - } -} - -static void intel_shared_dpll_abort_config(struct drm_i915_private *dev_priv) -{ - struct intel_shared_dpll *pll; - enum intel_dpll_id i; + if (!to_intel_atomic_state(state)->dpll_set) + return; + shared_dpll = to_intel_atomic_state(state)->shared_dpll; for (i = 0; i < dev_priv->num_shared_dpll; i++) { pll = &dev_priv->shared_dplls[i]; - - WARN_ON(pll->new_config == &pll->config); - - kfree(pll->new_config); - pll->new_config = NULL; + pll->config = shared_dpll[i]; } } @@ -4386,62 +4319,16 @@ static void cpt_verify_modeset(struct drm_device *dev, int pipe) } } -/** - * skl_update_scaler_users - Stages update to crtc's scaler state - * @intel_crtc: crtc - * @crtc_state: crtc_state - * @plane: plane (NULL indicates crtc is requesting update) - * @plane_state: plane's state - * @force_detach: request unconditional detachment of scaler - * - * This function updates scaler state for requested plane or crtc. - * To request scaler usage update for a plane, caller shall pass plane pointer. - * To request scaler usage update for crtc, caller shall pass plane pointer - * as NULL. - * - * Return - * 0 - scaler_usage updated successfully - * error - requested scaling cannot be supported or other error condition - */ -int -skl_update_scaler_users( - struct intel_crtc *intel_crtc, struct intel_crtc_state *crtc_state, - struct intel_plane *intel_plane, struct intel_plane_state *plane_state, - int force_detach) +static int +skl_update_scaler(struct intel_crtc_state *crtc_state, bool force_detach, + unsigned scaler_user, int *scaler_id, unsigned int rotation, + int src_w, int src_h, int dst_w, int dst_h) { + struct intel_crtc_scaler_state *scaler_state = + &crtc_state->scaler_state; + struct intel_crtc *intel_crtc = + to_intel_crtc(crtc_state->base.crtc); int need_scaling; - int idx; - int src_w, src_h, dst_w, dst_h; - int *scaler_id; - struct drm_framebuffer *fb; - struct intel_crtc_scaler_state *scaler_state; - unsigned int rotation; - - if (!intel_crtc || !crtc_state) - return 0; - - scaler_state = &crtc_state->scaler_state; - - idx = intel_plane ? drm_plane_index(&intel_plane->base) : SKL_CRTC_INDEX; - fb = intel_plane ? plane_state->base.fb : NULL; - - if (intel_plane) { - src_w = drm_rect_width(&plane_state->src) >> 16; - src_h = drm_rect_height(&plane_state->src) >> 16; - dst_w = drm_rect_width(&plane_state->dst); - dst_h = drm_rect_height(&plane_state->dst); - scaler_id = &plane_state->scaler_id; - rotation = plane_state->base.rotation; - } else { - struct drm_display_mode *adjusted_mode = - &crtc_state->base.adjusted_mode; - src_w = crtc_state->pipe_src_w; - src_h = crtc_state->pipe_src_h; - dst_w = adjusted_mode->hdisplay; - dst_h = adjusted_mode->vdisplay; - scaler_id = &scaler_state->scaler_id; - rotation = DRM_ROTATE_0; - } need_scaling = intel_rotation_90_or_270(rotation) ? (src_h != dst_w || src_w != dst_h): @@ -4457,17 +4344,14 @@ skl_update_scaler_users( * update to free the scaler is done in plane/panel-fit programming. * For this purpose crtc/plane_state->scaler_id isn't reset here. */ - if (force_detach || !need_scaling || (intel_plane && - (!fb || !plane_state->visible))) { + if (force_detach || !need_scaling) { if (*scaler_id >= 0) { - scaler_state->scaler_users &= ~(1 << idx); + scaler_state->scaler_users &= ~(1 << scaler_user); scaler_state->scalers[*scaler_id].in_use = 0; - DRM_DEBUG_KMS("Staged freeing scaler id %d.%d from %s:%d " - "crtc_state = %p scaler_users = 0x%x\n", - intel_crtc->pipe, *scaler_id, intel_plane ? "PLANE" : "CRTC", - intel_plane ? intel_plane->base.base.id : - intel_crtc->base.base.id, crtc_state, + DRM_DEBUG_KMS("scaler_user index %u.%u: " + "Staged freeing scaler id %d scaler_users = 0x%x\n", + intel_crtc->pipe, scaler_user, *scaler_id, scaler_state->scaler_users); *scaler_id = -1; } @@ -4480,55 +4364,123 @@ skl_update_scaler_users( src_w > SKL_MAX_SRC_W || src_h > SKL_MAX_SRC_H || dst_w > SKL_MAX_DST_W || dst_h > SKL_MAX_DST_H) { - DRM_DEBUG_KMS("%s:%d scaler_user index %u.%u: src %ux%u dst %ux%u " + DRM_DEBUG_KMS("scaler_user index %u.%u: src %ux%u dst %ux%u " "size is out of scaler range\n", - intel_plane ? "PLANE" : "CRTC", - intel_plane ? intel_plane->base.base.id : intel_crtc->base.base.id, - intel_crtc->pipe, idx, src_w, src_h, dst_w, dst_h); + intel_crtc->pipe, scaler_user, src_w, src_h, dst_w, dst_h); return -EINVAL; } + /* mark this plane as a scaler user in crtc_state */ + scaler_state->scaler_users |= (1 << scaler_user); + DRM_DEBUG_KMS("scaler_user index %u.%u: " + "staged scaling request for %ux%u->%ux%u scaler_users = 0x%x\n", + intel_crtc->pipe, scaler_user, src_w, src_h, dst_w, dst_h, + scaler_state->scaler_users); + + return 0; +} + +/** + * skl_update_scaler_crtc - Stages update to scaler state for a given crtc. + * + * @state: crtc's scaler state + * + * Return + * 0 - scaler_usage updated successfully + * error - requested scaling cannot be supported or other error condition + */ +int skl_update_scaler_crtc(struct intel_crtc_state *state) +{ + struct intel_crtc *intel_crtc = to_intel_crtc(state->base.crtc); + struct drm_display_mode *adjusted_mode = + &state->base.adjusted_mode; + + DRM_DEBUG_KMS("Updating scaler for [CRTC:%i] scaler_user index %u.%u\n", + intel_crtc->base.base.id, intel_crtc->pipe, SKL_CRTC_INDEX); + + return skl_update_scaler(state, !state->base.active, SKL_CRTC_INDEX, + &state->scaler_state.scaler_id, DRM_ROTATE_0, + state->pipe_src_w, state->pipe_src_h, + adjusted_mode->hdisplay, adjusted_mode->vdisplay); +} + +/** + * skl_update_scaler_plane - Stages update to scaler state for a given plane. + * + * @state: crtc's scaler state + * @plane_state: atomic plane state to update + * + * Return + * 0 - scaler_usage updated successfully + * error - requested scaling cannot be supported or other error condition + */ +static int skl_update_scaler_plane(struct intel_crtc_state *crtc_state, + struct intel_plane_state *plane_state) +{ + + struct intel_crtc *intel_crtc = to_intel_crtc(crtc_state->base.crtc); + struct intel_plane *intel_plane = + to_intel_plane(plane_state->base.plane); + struct drm_framebuffer *fb = plane_state->base.fb; + int ret; + + bool force_detach = !fb || !plane_state->visible; + + DRM_DEBUG_KMS("Updating scaler for [PLANE:%d] scaler_user index %u.%u\n", + intel_plane->base.base.id, intel_crtc->pipe, + drm_plane_index(&intel_plane->base)); + + ret = skl_update_scaler(crtc_state, force_detach, + drm_plane_index(&intel_plane->base), + &plane_state->scaler_id, + plane_state->base.rotation, + drm_rect_width(&plane_state->src) >> 16, + drm_rect_height(&plane_state->src) >> 16, + drm_rect_width(&plane_state->dst), + drm_rect_height(&plane_state->dst)); + + if (ret || plane_state->scaler_id < 0) + return ret; + /* check colorkey */ - if (WARN_ON(intel_plane && - intel_plane->ckey.flags != I915_SET_COLORKEY_NONE)) { - DRM_DEBUG_KMS("PLANE:%d scaling %ux%u->%ux%u not allowed with colorkey", - intel_plane->base.base.id, src_w, src_h, dst_w, dst_h); + if (plane_state->ckey.flags != I915_SET_COLORKEY_NONE) { + DRM_DEBUG_KMS("[PLANE:%d] scaling with color key not allowed", + intel_plane->base.base.id); return -EINVAL; } /* Check src format */ - if (intel_plane) { - switch (fb->pixel_format) { - case DRM_FORMAT_RGB565: - case DRM_FORMAT_XBGR8888: - case DRM_FORMAT_XRGB8888: - case DRM_FORMAT_ABGR8888: - case DRM_FORMAT_ARGB8888: - case DRM_FORMAT_XRGB2101010: - case DRM_FORMAT_XBGR2101010: - case DRM_FORMAT_YUYV: - case DRM_FORMAT_YVYU: - case DRM_FORMAT_UYVY: - case DRM_FORMAT_VYUY: - break; - default: - DRM_DEBUG_KMS("PLANE:%d FB:%d unsupported scaling format 0x%x\n", - intel_plane->base.base.id, fb->base.id, fb->pixel_format); - return -EINVAL; - } + switch (fb->pixel_format) { + case DRM_FORMAT_RGB565: + case DRM_FORMAT_XBGR8888: + case DRM_FORMAT_XRGB8888: + case DRM_FORMAT_ABGR8888: + case DRM_FORMAT_ARGB8888: + case DRM_FORMAT_XRGB2101010: + case DRM_FORMAT_XBGR2101010: + case DRM_FORMAT_YUYV: + case DRM_FORMAT_YVYU: + case DRM_FORMAT_UYVY: + case DRM_FORMAT_VYUY: + break; + default: + DRM_DEBUG_KMS("[PLANE:%d] FB:%d unsupported scaling format 0x%x\n", + intel_plane->base.base.id, fb->base.id, fb->pixel_format); + return -EINVAL; } - /* mark this plane as a scaler user in crtc_state */ - scaler_state->scaler_users |= (1 << idx); - DRM_DEBUG_KMS("%s:%d staged scaling request for %ux%u->%ux%u " - "crtc_state = %p scaler_users = 0x%x\n", - intel_plane ? "PLANE" : "CRTC", - intel_plane ? intel_plane->base.base.id : intel_crtc->base.base.id, - src_w, src_h, dst_w, dst_h, crtc_state, scaler_state->scaler_users); return 0; } -static void skylake_pfit_update(struct intel_crtc *crtc, int enable) +static void skylake_scaler_disable(struct intel_crtc *crtc) +{ + int i; + + for (i = 0; i < crtc->num_scalers; i++) + skl_detach_scaler(crtc, i); +} + +static void skylake_pfit_enable(struct intel_crtc *crtc) { struct drm_device *dev = crtc->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; @@ -4538,13 +4490,6 @@ static void skylake_pfit_update(struct intel_crtc *crtc, int enable) DRM_DEBUG_KMS("for crtc_state = %p\n", crtc->config); - /* To update pfit, first update scaler state */ - skl_update_scaler_users(crtc, crtc->config, NULL, NULL, !enable); - intel_atomic_setup_scalers(crtc->base.dev, crtc, crtc->config); - skl_detach_scalers(crtc); - if (!enable) - return; - if (crtc->config->pch_pfit.enabled) { int id; @@ -4584,20 +4529,6 @@ static void ironlake_pfit_enable(struct intel_crtc *crtc) } } -static void intel_enable_sprite_planes(struct drm_crtc *crtc) -{ - struct drm_device *dev = crtc->dev; - enum pipe pipe = to_intel_crtc(crtc)->pipe; - struct drm_plane *plane; - struct intel_plane *intel_plane; - - drm_for_each_legacy_plane(plane, &dev->mode_config.plane_list) { - intel_plane = to_intel_plane(plane); - if (intel_plane->pipe == pipe) - intel_plane_restore(&intel_plane->base); - } -} - void hsw_enable_ips(struct intel_crtc *crtc) { struct drm_device *dev = crtc->base.dev; @@ -4668,7 +4599,7 @@ static void intel_crtc_load_lut(struct drm_crtc *crtc) bool reenable_ips = false; /* The clocks have to be on to load the palette. */ - if (!crtc->state->enable || !intel_crtc->active) + if (!crtc->state->active) return; if (HAS_GMCH_DISPLAY(dev_priv->dev)) { @@ -4755,10 +4686,6 @@ intel_post_enable_primary(struct drm_crtc *crtc) */ hsw_enable_ips(intel_crtc); - mutex_lock(&dev->struct_mutex); - intel_fbc_update(dev); - mutex_unlock(&dev->struct_mutex); - /* * Gen2 reports pipe underruns whenever all planes are disabled. * So don't enable underrun reporting before at least some planes @@ -4810,13 +4737,11 @@ intel_pre_disable_primary(struct drm_crtc *crtc) * event which is after the vblank start event, so we need to have a * wait-for-vblank between disabling the plane and the pipe. */ - if (HAS_GMCH_DISPLAY(dev)) + if (HAS_GMCH_DISPLAY(dev)) { intel_set_memory_cxsr(dev_priv, false); - - mutex_lock(&dev->struct_mutex); - if (dev_priv->fbc.crtc == intel_crtc) - intel_fbc_disable(dev); - mutex_unlock(&dev->struct_mutex); + dev_priv->wm.vlv.cxsr = false; + intel_wait_for_vblank(dev, pipe); + } /* * FIXME IPS should be fine as long as one plane is @@ -4827,49 +4752,83 @@ intel_pre_disable_primary(struct drm_crtc *crtc) hsw_disable_ips(intel_crtc); } -static void intel_crtc_enable_planes(struct drm_crtc *crtc) +static void intel_post_plane_update(struct intel_crtc *crtc) { - struct drm_device *dev = crtc->dev; - struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - int pipe = intel_crtc->pipe; + struct intel_crtc_atomic_commit *atomic = &crtc->atomic; + struct drm_device *dev = crtc->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct drm_plane *plane; - intel_enable_primary_hw_plane(crtc->primary, crtc); - intel_enable_sprite_planes(crtc); - intel_crtc_update_cursor(crtc, true); + if (atomic->wait_vblank) + intel_wait_for_vblank(dev, crtc->pipe); - intel_post_enable_primary(crtc); + intel_frontbuffer_flip(dev, atomic->fb_bits); - /* - * FIXME: Once we grow proper nuclear flip support out of this we need - * to compute the mask of flip planes precisely. For the time being - * consider this a flip to a NULL plane. - */ - intel_frontbuffer_flip(dev, INTEL_FRONTBUFFER_ALL_MASK(pipe)); + if (atomic->disable_cxsr) + crtc->wm.cxsr_allowed = true; + + if (crtc->atomic.update_wm_post) + intel_update_watermarks(&crtc->base); + + if (atomic->update_fbc) + intel_fbc_update(dev_priv); + + if (atomic->post_enable_primary) + intel_post_enable_primary(&crtc->base); + + drm_for_each_plane_mask(plane, dev, atomic->update_sprite_watermarks) + intel_update_sprite_watermarks(plane, &crtc->base, + 0, 0, 0, false, false); + + memset(atomic, 0, sizeof(*atomic)); } -static void intel_crtc_disable_planes(struct drm_crtc *crtc) +static void intel_pre_plane_update(struct intel_crtc *crtc) { - struct drm_device *dev = crtc->dev; - struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - struct intel_plane *intel_plane; - int pipe = intel_crtc->pipe; + struct drm_device *dev = crtc->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc_atomic_commit *atomic = &crtc->atomic; + struct drm_plane *p; - if (!intel_crtc->active) - return; + /* Track fb's for any planes being disabled */ + drm_for_each_plane_mask(p, dev, atomic->disabled_planes) { + struct intel_plane *plane = to_intel_plane(p); - intel_crtc_wait_for_pending_flips(crtc); + mutex_lock(&dev->struct_mutex); + i915_gem_track_fb(intel_fb_obj(plane->base.fb), NULL, + plane->frontbuffer_bit); + mutex_unlock(&dev->struct_mutex); + } - intel_pre_disable_primary(crtc); + if (atomic->wait_for_flips) + intel_crtc_wait_for_pending_flips(&crtc->base); - intel_crtc_dpms_overlay_disable(intel_crtc); - for_each_intel_plane(dev, intel_plane) { - if (intel_plane->pipe == pipe) { - struct drm_crtc *from = intel_plane->base.crtc; + if (atomic->disable_fbc) + intel_fbc_disable_crtc(crtc); - intel_plane->disable_plane(&intel_plane->base, - from ?: crtc, true); - } + if (crtc->atomic.disable_ips) + hsw_disable_ips(crtc); + + if (atomic->pre_disable_primary) + intel_pre_disable_primary(&crtc->base); + + if (atomic->disable_cxsr) { + crtc->wm.cxsr_allowed = false; + intel_set_memory_cxsr(dev_priv, false); } +} + +static void intel_crtc_disable_planes(struct drm_crtc *crtc, unsigned plane_mask) +{ + struct drm_device *dev = crtc->dev; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + struct drm_plane *p; + int pipe = intel_crtc->pipe; + + intel_crtc_dpms_overlay_disable(intel_crtc); + + drm_for_each_plane_mask(p, dev, plane_mask) + to_intel_plane(p)->disable_plane(p, crtc); /* * FIXME: Once we grow proper nuclear flip support out of this we need @@ -4887,9 +4846,7 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc) struct intel_encoder *encoder; int pipe = intel_crtc->pipe; - WARN_ON(!crtc->state->enable); - - if (intel_crtc->active) + if (WARN_ON(intel_crtc->active)) return; if (intel_crtc->config->has_pch_encoder) @@ -4956,46 +4913,17 @@ static bool hsw_crtc_supports_ips(struct intel_crtc *crtc) return HAS_IPS(crtc->base.dev) && crtc->pipe == PIPE_A; } -/* - * This implements the workaround described in the "notes" section of the mode - * set sequence documentation. When going from no pipes or single pipe to - * multiple pipes, and planes are enabled after the pipe, we need to wait at - * least 2 vblanks on the first pipe before enabling planes on the second pipe. - */ -static void haswell_mode_set_planes_workaround(struct intel_crtc *crtc) -{ - struct drm_device *dev = crtc->base.dev; - struct intel_crtc *crtc_it, *other_active_crtc = NULL; - - /* We want to get the other_active_crtc only if there's only 1 other - * active crtc. */ - for_each_intel_crtc(dev, crtc_it) { - if (!crtc_it->active || crtc_it == crtc) - continue; - - if (other_active_crtc) - return; - - other_active_crtc = crtc_it; - } - if (!other_active_crtc) - return; - - intel_wait_for_vblank(dev, other_active_crtc->pipe); - intel_wait_for_vblank(dev, other_active_crtc->pipe); -} - static void haswell_crtc_enable(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); struct intel_encoder *encoder; - int pipe = intel_crtc->pipe; + int pipe = intel_crtc->pipe, hsw_workaround_pipe; + struct intel_crtc_state *pipe_config = + to_intel_crtc_state(crtc->state); - WARN_ON(!crtc->state->enable); - - if (intel_crtc->active) + if (WARN_ON(intel_crtc->active)) return; if (intel_crtc_to_shared_dpll(intel_crtc)) @@ -5036,7 +4964,7 @@ static void haswell_crtc_enable(struct drm_crtc *crtc) intel_ddi_enable_pipe_clock(intel_crtc); if (INTEL_INFO(dev)->gen == 9) - skylake_pfit_update(intel_crtc, 1); + skylake_pfit_enable(intel_crtc); else if (INTEL_INFO(dev)->gen < 9) ironlake_pfit_enable(intel_crtc); else @@ -5070,7 +4998,11 @@ static void haswell_crtc_enable(struct drm_crtc *crtc) /* If we change the relative order between pipe/planes enabling, we need * to change the workaround. */ - haswell_mode_set_planes_workaround(intel_crtc); + hsw_workaround_pipe = pipe_config->hsw_workaround_pipe; + if (IS_HASWELL(dev) && hsw_workaround_pipe != INVALID_PIPE) { + intel_wait_for_vblank(dev, hsw_workaround_pipe); + intel_wait_for_vblank(dev, hsw_workaround_pipe); + } } static void ironlake_pfit_disable(struct intel_crtc *crtc) @@ -5097,9 +5029,6 @@ static void ironlake_crtc_disable(struct drm_crtc *crtc) int pipe = intel_crtc->pipe; u32 reg, temp; - if (!intel_crtc->active) - return; - for_each_encoder_on_crtc(dev, crtc, encoder) encoder->disable(encoder); @@ -5138,18 +5067,11 @@ static void ironlake_crtc_disable(struct drm_crtc *crtc) I915_WRITE(PCH_DPLL_SEL, temp); } - /* disable PCH DPLL */ - intel_disable_shared_dpll(intel_crtc); - ironlake_fdi_pll_disable(intel_crtc); } intel_crtc->active = false; intel_update_watermarks(crtc); - - mutex_lock(&dev->struct_mutex); - intel_fbc_update(dev); - mutex_unlock(&dev->struct_mutex); } static void haswell_crtc_disable(struct drm_crtc *crtc) @@ -5160,9 +5082,6 @@ static void haswell_crtc_disable(struct drm_crtc *crtc) struct intel_encoder *encoder; enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder; - if (!intel_crtc->active) - return; - for_each_encoder_on_crtc(dev, crtc, encoder) { intel_opregion_notify_encoder(encoder, false); encoder->disable(encoder); @@ -5182,7 +5101,7 @@ static void haswell_crtc_disable(struct drm_crtc *crtc) intel_ddi_disable_transcoder_func(dev_priv, cpu_transcoder); if (INTEL_INFO(dev)->gen == 9) - skylake_pfit_update(intel_crtc, 0); + skylake_scaler_disable(intel_crtc); else if (INTEL_INFO(dev)->gen < 9) ironlake_pfit_disable(intel_crtc); else @@ -5201,22 +5120,8 @@ static void haswell_crtc_disable(struct drm_crtc *crtc) intel_crtc->active = false; intel_update_watermarks(crtc); - - mutex_lock(&dev->struct_mutex); - intel_fbc_update(dev); - mutex_unlock(&dev->struct_mutex); - - if (intel_crtc_to_shared_dpll(intel_crtc)) - intel_disable_shared_dpll(intel_crtc); } -static void ironlake_crtc_off(struct drm_crtc *crtc) -{ - struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - intel_put_shared_dpll(intel_crtc); -} - - static void i9xx_pfit_enable(struct intel_crtc *crtc) { struct drm_device *dev = crtc->base.dev; @@ -5252,6 +5157,8 @@ static enum intel_display_power_domain port_to_power_domain(enum port port) return POWER_DOMAIN_PORT_DDI_C_4_LANES; case PORT_D: return POWER_DOMAIN_PORT_DDI_D_4_LANES; + case PORT_E: + return POWER_DOMAIN_PORT_DDI_E_2_LANES; default: WARN_ON_ONCE(1); return POWER_DOMAIN_PORT_OTHER; @@ -5298,6 +5205,9 @@ static unsigned long get_crtc_power_domains(struct drm_crtc *crtc) unsigned long mask; enum transcoder transcoder; + if (!crtc->state->active) + return 0; + transcoder = intel_pipe_to_cpu_transcoder(dev->dev_private, pipe); mask = BIT(POWER_DOMAIN_PIPE(pipe)); @@ -5312,45 +5222,131 @@ static unsigned long get_crtc_power_domains(struct drm_crtc *crtc) return mask; } +static unsigned long modeset_get_crtc_power_domains(struct drm_crtc *crtc) +{ + struct drm_i915_private *dev_priv = crtc->dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + enum intel_display_power_domain domain; + unsigned long domains, new_domains, old_domains; + + old_domains = intel_crtc->enabled_power_domains; + intel_crtc->enabled_power_domains = new_domains = get_crtc_power_domains(crtc); + + domains = new_domains & ~old_domains; + + for_each_power_domain(domain, domains) + intel_display_power_get(dev_priv, domain); + + return old_domains & ~new_domains; +} + +static void modeset_put_power_domains(struct drm_i915_private *dev_priv, + unsigned long domains) +{ + enum intel_display_power_domain domain; + + for_each_power_domain(domain, domains) + intel_display_power_put(dev_priv, domain); +} + static void modeset_update_crtc_power_domains(struct drm_atomic_state *state) { struct drm_device *dev = state->dev; struct drm_i915_private *dev_priv = dev->dev_private; - unsigned long pipe_domains[I915_MAX_PIPES] = { 0, }; - struct intel_crtc *crtc; + unsigned long put_domains[I915_MAX_PIPES] = {}; + struct drm_crtc_state *crtc_state; + struct drm_crtc *crtc; + int i; - /* - * First get all needed power domains, then put all unneeded, to avoid - * any unnecessary toggling of the power wells. - */ - for_each_intel_crtc(dev, crtc) { - enum intel_display_power_domain domain; + for_each_crtc_in_state(state, crtc, crtc_state, i) { + if (needs_modeset(crtc->state)) + put_domains[to_intel_crtc(crtc)->pipe] = + modeset_get_crtc_power_domains(crtc); + } - if (!crtc->base.state->enable) - continue; + if (dev_priv->display.modeset_commit_cdclk) { + unsigned int cdclk = to_intel_atomic_state(state)->cdclk; + + if (cdclk != dev_priv->cdclk_freq && + !WARN_ON(!state->allow_modeset)) + dev_priv->display.modeset_commit_cdclk(state); + } + + for (i = 0; i < I915_MAX_PIPES; i++) + if (put_domains[i]) + modeset_put_power_domains(dev_priv, put_domains[i]); +} + +static void intel_update_max_cdclk(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; - pipe_domains[crtc->pipe] = get_crtc_power_domains(&crtc->base); + if (IS_SKYLAKE(dev)) { + u32 limit = I915_READ(SKL_DFSM) & SKL_DFSM_CDCLK_LIMIT_MASK; - for_each_power_domain(domain, pipe_domains[crtc->pipe]) - intel_display_power_get(dev_priv, domain); + if (limit == SKL_DFSM_CDCLK_LIMIT_675) + dev_priv->max_cdclk_freq = 675000; + else if (limit == SKL_DFSM_CDCLK_LIMIT_540) + dev_priv->max_cdclk_freq = 540000; + else if (limit == SKL_DFSM_CDCLK_LIMIT_450) + dev_priv->max_cdclk_freq = 450000; + else + dev_priv->max_cdclk_freq = 337500; + } else if (IS_BROADWELL(dev)) { + /* + * FIXME with extra cooling we can allow + * 540 MHz for ULX and 675 Mhz for ULT. + * How can we know if extra cooling is + * available? PCI ID, VTB, something else? + */ + if (I915_READ(FUSE_STRAP) & HSW_CDCLK_LIMIT) + dev_priv->max_cdclk_freq = 450000; + else if (IS_BDW_ULX(dev)) + dev_priv->max_cdclk_freq = 450000; + else if (IS_BDW_ULT(dev)) + dev_priv->max_cdclk_freq = 540000; + else + dev_priv->max_cdclk_freq = 675000; + } else if (IS_CHERRYVIEW(dev)) { + dev_priv->max_cdclk_freq = 320000; + } else if (IS_VALLEYVIEW(dev)) { + dev_priv->max_cdclk_freq = 400000; + } else { + /* otherwise assume cdclk is fixed */ + dev_priv->max_cdclk_freq = dev_priv->cdclk_freq; } - if (dev_priv->display.modeset_global_resources) - dev_priv->display.modeset_global_resources(state); + DRM_DEBUG_DRIVER("Max CD clock rate: %d kHz\n", + dev_priv->max_cdclk_freq); +} - for_each_intel_crtc(dev, crtc) { - enum intel_display_power_domain domain; +static void intel_update_cdclk(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; - for_each_power_domain(domain, crtc->enabled_power_domains) - intel_display_power_put(dev_priv, domain); + dev_priv->cdclk_freq = dev_priv->display.get_display_clock_speed(dev); + DRM_DEBUG_DRIVER("Current CD clock rate: %d kHz\n", + dev_priv->cdclk_freq); - crtc->enabled_power_domains = pipe_domains[crtc->pipe]; + /* + * Program the gmbus_freq based on the cdclk frequency. + * BSpec erroneously claims we should aim for 4MHz, but + * in fact 1MHz is the correct frequency. + */ + if (IS_VALLEYVIEW(dev)) { + /* + * Program the gmbus_freq based on the cdclk frequency. + * BSpec erroneously claims we should aim for 4MHz, but + * in fact 1MHz is the correct frequency. + */ + I915_WRITE(GMBUSFREQ_VLV, DIV_ROUND_UP(dev_priv->cdclk_freq, 1000)); } - intel_display_set_init_power(dev_priv, false); + if (dev_priv->max_cdclk_freq == 0) + intel_update_max_cdclk(dev); } -void broxton_set_cdclk(struct drm_device *dev, int frequency) +static void broxton_set_cdclk(struct drm_device *dev, int frequency) { struct drm_i915_private *dev_priv = dev->dev_private; uint32_t divider; @@ -5466,7 +5462,7 @@ void broxton_set_cdclk(struct drm_device *dev, int frequency) return; } - dev_priv->cdclk_freq = frequency; + intel_update_cdclk(dev); } void broxton_init_cdclk(struct drm_device *dev) @@ -5641,6 +5637,7 @@ static bool skl_cdclk_wait_for_pcu_ready(struct drm_i915_private *dev_priv) static void skl_set_cdclk(struct drm_i915_private *dev_priv, unsigned int freq) { + struct drm_device *dev = dev_priv->dev; u32 freq_select, pcu_ack; DRM_DEBUG_DRIVER("Changing CDCLK to %dKHz\n", freq); @@ -5681,6 +5678,8 @@ static void skl_set_cdclk(struct drm_i915_private *dev_priv, unsigned int freq) mutex_lock(&dev_priv->rps.hw_lock); sandybridge_pcode_write(dev_priv, SKL_PCODE_CDCLK_CONTROL, pcu_ack); mutex_unlock(&dev_priv->rps.hw_lock); + + intel_update_cdclk(dev); } void skl_uninit_cdclk(struct drm_i915_private *dev_priv) @@ -5714,16 +5713,13 @@ void skl_init_cdclk(struct drm_i915_private *dev_priv) /* enable PG1 and Misc I/O */ intel_display_power_get(dev_priv, POWER_DOMAIN_PLLS); - /* DPLL0 already enabed !? */ - if (I915_READ(LCPLL1_CTL) & LCPLL_PLL_ENABLE) { - DRM_DEBUG_DRIVER("DPLL0 already running\n"); - return; + /* DPLL0 not enabled (happens on early BIOS versions) */ + if (!(I915_READ(LCPLL1_CTL) & LCPLL_PLL_ENABLE)) { + /* enable DPLL0 */ + required_vco = skl_cdclk_get_vco(dev_priv->skl_boot_cdclk); + skl_dpll0_enable(dev_priv, required_vco); } - /* enable DPLL0 */ - required_vco = skl_cdclk_get_vco(dev_priv->skl_boot_cdclk); - skl_dpll0_enable(dev_priv, required_vco); - /* set CDCLK to the frequency the BIOS chose */ skl_set_cdclk(dev_priv, dev_priv->skl_boot_cdclk); @@ -5751,22 +5747,6 @@ static int valleyview_get_vco(struct drm_i915_private *dev_priv) return vco_freq[hpll_freq] * 1000; } -static void vlv_update_cdclk(struct drm_device *dev) -{ - struct drm_i915_private *dev_priv = dev->dev_private; - - dev_priv->cdclk_freq = dev_priv->display.get_display_clock_speed(dev); - DRM_DEBUG_DRIVER("Current CD clock rate: %d kHz\n", - dev_priv->cdclk_freq); - - /* - * Program the gmbus_freq based on the cdclk frequency. - * BSpec erroneously claims we should aim for 4MHz, but - * in fact 1MHz is the correct frequency. - */ - I915_WRITE(GMBUSFREQ_VLV, DIV_ROUND_UP(dev_priv->cdclk_freq, 1000)); -} - /* Adjust CDclk dividers to allow high res or save power if possible */ static void valleyview_set_cdclk(struct drm_device *dev, int cdclk) { @@ -5830,7 +5810,7 @@ static void valleyview_set_cdclk(struct drm_device *dev, int cdclk) mutex_unlock(&dev_priv->sb_lock); - vlv_update_cdclk(dev); + intel_update_cdclk(dev); } static void cherryview_set_cdclk(struct drm_device *dev, int cdclk) @@ -5871,7 +5851,7 @@ static void cherryview_set_cdclk(struct drm_device *dev, int cdclk) } mutex_unlock(&dev_priv->rps.hw_lock); - vlv_update_cdclk(dev); + intel_update_cdclk(dev); } static int valleyview_calc_cdclk(struct drm_i915_private *dev_priv, @@ -5934,11 +5914,7 @@ static int intel_mode_max_pixclk(struct drm_device *dev, int max_pixclk = 0; for_each_intel_crtc(dev, intel_crtc) { - if (state) - crtc_state = - intel_atomic_get_crtc_state(state, intel_crtc); - else - crtc_state = intel_crtc->config; + crtc_state = intel_atomic_get_crtc_state(state, intel_crtc); if (IS_ERR(crtc_state)) return PTR_ERR(crtc_state); @@ -5952,39 +5928,32 @@ static int intel_mode_max_pixclk(struct drm_device *dev, return max_pixclk; } -static int valleyview_modeset_global_pipes(struct drm_atomic_state *state) +static int valleyview_modeset_calc_cdclk(struct drm_atomic_state *state) { - struct drm_i915_private *dev_priv = to_i915(state->dev); - struct drm_crtc *crtc; - struct drm_crtc_state *crtc_state; - int max_pixclk = intel_mode_max_pixclk(state->dev, state); - int cdclk, i; + struct drm_device *dev = state->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + int max_pixclk = intel_mode_max_pixclk(dev, state); if (max_pixclk < 0) return max_pixclk; - if (IS_VALLEYVIEW(dev_priv)) - cdclk = valleyview_calc_cdclk(dev_priv, max_pixclk); - else - cdclk = broxton_calc_cdclk(dev_priv, max_pixclk); + to_intel_atomic_state(state)->cdclk = + valleyview_calc_cdclk(dev_priv, max_pixclk); - if (cdclk == dev_priv->cdclk_freq) - return 0; + return 0; +} - /* add all active pipes to the state */ - for_each_crtc(state->dev, crtc) { - if (!crtc->state->enable) - continue; +static int broxton_modeset_calc_cdclk(struct drm_atomic_state *state) +{ + struct drm_device *dev = state->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + int max_pixclk = intel_mode_max_pixclk(dev, state); - crtc_state = drm_atomic_get_crtc_state(state, crtc); - if (IS_ERR(crtc_state)) - return PTR_ERR(crtc_state); - } + if (max_pixclk < 0) + return max_pixclk; - /* disable/enable all currently active pipes while we change cdclk */ - for_each_crtc_in_state(state, crtc, crtc_state, i) - if (crtc_state->enable) - crtc_state->mode_changed = true; + to_intel_atomic_state(state)->cdclk = + broxton_calc_cdclk(dev_priv, max_pixclk); return 0; } @@ -6001,7 +5970,7 @@ static void vlv_program_pfi_credits(struct drm_i915_private *dev_priv) if (DIV_ROUND_CLOSEST(dev_priv->cdclk_freq, 1000) >= dev_priv->rps.cz_freq) { /* CHV suggested value is 31 or 63 */ if (IS_CHERRYVIEW(dev_priv)) - credits = PFI_CREDIT_31; + credits = PFI_CREDIT_63; else credits = PFI_CREDIT(15); } else { @@ -6025,41 +5994,31 @@ static void vlv_program_pfi_credits(struct drm_i915_private *dev_priv) WARN_ON(I915_READ(GCI_CONTROL) & PFI_CREDIT_RESEND); } -static void valleyview_modeset_global_resources(struct drm_atomic_state *old_state) +static void valleyview_modeset_commit_cdclk(struct drm_atomic_state *old_state) { struct drm_device *dev = old_state->dev; + unsigned int req_cdclk = to_intel_atomic_state(old_state)->cdclk; struct drm_i915_private *dev_priv = dev->dev_private; - int max_pixclk = intel_mode_max_pixclk(dev, NULL); - int req_cdclk; - /* The path in intel_mode_max_pixclk() with a NULL atomic state should - * never fail. */ - if (WARN_ON(max_pixclk < 0)) - return; - - req_cdclk = valleyview_calc_cdclk(dev_priv, max_pixclk); - - if (req_cdclk != dev_priv->cdclk_freq) { - /* - * FIXME: We can end up here with all power domains off, yet - * with a CDCLK frequency other than the minimum. To account - * for this take the PIPE-A power domain, which covers the HW - * blocks needed for the following programming. This can be - * removed once it's guaranteed that we get here either with - * the minimum CDCLK set, or the required power domains - * enabled. - */ - intel_display_power_get(dev_priv, POWER_DOMAIN_PIPE_A); + /* + * FIXME: We can end up here with all power domains off, yet + * with a CDCLK frequency other than the minimum. To account + * for this take the PIPE-A power domain, which covers the HW + * blocks needed for the following programming. This can be + * removed once it's guaranteed that we get here either with + * the minimum CDCLK set, or the required power domains + * enabled. + */ + intel_display_power_get(dev_priv, POWER_DOMAIN_PIPE_A); - if (IS_CHERRYVIEW(dev)) - cherryview_set_cdclk(dev, req_cdclk); - else - valleyview_set_cdclk(dev, req_cdclk); + if (IS_CHERRYVIEW(dev)) + cherryview_set_cdclk(dev, req_cdclk); + else + valleyview_set_cdclk(dev, req_cdclk); - vlv_program_pfi_credits(dev_priv); + vlv_program_pfi_credits(dev_priv); - intel_display_power_put(dev_priv, POWER_DOMAIN_PIPE_A); - } + intel_display_power_put(dev_priv, POWER_DOMAIN_PIPE_A); } static void valleyview_crtc_enable(struct drm_crtc *crtc) @@ -6071,9 +6030,7 @@ static void valleyview_crtc_enable(struct drm_crtc *crtc) int pipe = intel_crtc->pipe; bool is_dsi; - WARN_ON(!crtc->state->enable); - - if (intel_crtc->active) + if (WARN_ON(intel_crtc->active)) return; is_dsi = intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_DSI); @@ -6122,7 +6079,6 @@ static void valleyview_crtc_enable(struct drm_crtc *crtc) intel_crtc_load_lut(crtc); - intel_update_watermarks(crtc); intel_enable_pipe(intel_crtc); assert_vblank_disabled(crtc); @@ -6149,9 +6105,7 @@ static void i9xx_crtc_enable(struct drm_crtc *crtc) struct intel_encoder *encoder; int pipe = intel_crtc->pipe; - WARN_ON(!crtc->state->enable); - - if (intel_crtc->active) + if (WARN_ON(intel_crtc->active)) return; i9xx_set_pll_dividers(intel_crtc); @@ -6211,9 +6165,6 @@ static void i9xx_crtc_disable(struct drm_crtc *crtc) struct intel_encoder *encoder; int pipe = intel_crtc->pipe; - if (!intel_crtc->active) - return; - /* * On gen2 planes are double buffered but the pipe isn't, so we must * wait for planes to fully turn off before disabling the pipe. @@ -6250,91 +6201,89 @@ static void i9xx_crtc_disable(struct drm_crtc *crtc) intel_crtc->active = false; intel_update_watermarks(crtc); - - mutex_lock(&dev->struct_mutex); - intel_fbc_update(dev); - mutex_unlock(&dev->struct_mutex); } -static void i9xx_crtc_off(struct drm_crtc *crtc) +static void intel_crtc_disable_noatomic(struct drm_crtc *crtc) { -} - -/* Master function to enable/disable CRTC and corresponding power wells */ -void intel_crtc_control(struct drm_crtc *crtc, bool enable) -{ - struct drm_device *dev = crtc->dev; - struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + struct drm_i915_private *dev_priv = to_i915(crtc->dev); enum intel_display_power_domain domain; unsigned long domains; - if (enable) { - if (!intel_crtc->active) { - domains = get_crtc_power_domains(crtc); - for_each_power_domain(domain, domains) - intel_display_power_get(dev_priv, domain); - intel_crtc->enabled_power_domains = domains; - - dev_priv->display.crtc_enable(crtc); - intel_crtc_enable_planes(crtc); - } - } else { - if (intel_crtc->active) { - intel_crtc_disable_planes(crtc); - dev_priv->display.crtc_disable(crtc); + if (!intel_crtc->active) + return; - domains = intel_crtc->enabled_power_domains; - for_each_power_domain(domain, domains) - intel_display_power_put(dev_priv, domain); - intel_crtc->enabled_power_domains = 0; - } + if (to_intel_plane_state(crtc->primary->state)->visible) { + intel_crtc_wait_for_pending_flips(crtc); + intel_pre_disable_primary(crtc); } + + intel_crtc_disable_planes(crtc, crtc->state->plane_mask); + dev_priv->display.crtc_disable(crtc); + intel_disable_shared_dpll(intel_crtc); + + domains = intel_crtc->enabled_power_domains; + for_each_power_domain(domain, domains) + intel_display_power_put(dev_priv, domain); + intel_crtc->enabled_power_domains = 0; } -/** - * Sets the power management mode of the pipe and plane. +/* + * turn all crtc's off, but do not adjust state + * This has to be paired with a call to intel_modeset_setup_hw_state. */ -void intel_crtc_update_dpms(struct drm_crtc *crtc) +int intel_display_suspend(struct drm_device *dev) { - struct drm_device *dev = crtc->dev; - struct intel_encoder *intel_encoder; - bool enable = false; + struct drm_mode_config *config = &dev->mode_config; + struct drm_modeset_acquire_ctx *ctx = config->acquire_ctx; + struct drm_atomic_state *state; + struct drm_crtc *crtc; + unsigned crtc_mask = 0; + int ret = 0; - for_each_encoder_on_crtc(dev, crtc, intel_encoder) - enable |= intel_encoder->connectors_active; + if (WARN_ON(!ctx)) + return 0; - intel_crtc_control(crtc, enable); + lockdep_assert_held(&ctx->ww_ctx); + state = drm_atomic_state_alloc(dev); + if (WARN_ON(!state)) + return -ENOMEM; - crtc->state->active = enable; -} + state->acquire_ctx = ctx; + state->allow_modeset = true; -static void intel_crtc_disable(struct drm_crtc *crtc) -{ - struct drm_device *dev = crtc->dev; - struct drm_connector *connector; - struct drm_i915_private *dev_priv = dev->dev_private; + for_each_crtc(dev, crtc) { + struct drm_crtc_state *crtc_state = + drm_atomic_get_crtc_state(state, crtc); - /* crtc should still be enabled when we disable it. */ - WARN_ON(!crtc->state->enable); + ret = PTR_ERR_OR_ZERO(crtc_state); + if (ret) + goto free; - intel_crtc_disable_planes(crtc); - dev_priv->display.crtc_disable(crtc); - dev_priv->display.off(crtc); + if (!crtc_state->active) + continue; - drm_plane_helper_disable(crtc->primary); + crtc_state->active = false; + crtc_mask |= 1 << drm_crtc_index(crtc); + } - /* Update computed state. */ - list_for_each_entry(connector, &dev->mode_config.connector_list, head) { - if (!connector->encoder || !connector->encoder->crtc) - continue; + if (crtc_mask) { + ret = drm_atomic_commit(state); - if (connector->encoder->crtc != crtc) - continue; + if (!ret) { + for_each_crtc(dev, crtc) + if (crtc_mask & (1 << drm_crtc_index(crtc))) + crtc->state->active = true; - connector->dpms = DRM_MODE_DPMS_OFF; - to_intel_encoder(connector->encoder)->connectors_active = false; + return ret; + } } + +free: + if (ret) + DRM_ERROR("Suspending crtc's failed with %i\n", ret); + drm_atomic_state_free(state); + return ret; } void intel_encoder_destroy(struct drm_encoder *encoder) @@ -6345,62 +6294,42 @@ void intel_encoder_destroy(struct drm_encoder *encoder) kfree(intel_encoder); } -/* Simple dpms helper for encoders with just one connector, no cloning and only - * one kind of off state. It clamps all !ON modes to fully OFF and changes the - * state of the entire output pipe. */ -static void intel_encoder_dpms(struct intel_encoder *encoder, int mode) -{ - if (mode == DRM_MODE_DPMS_ON) { - encoder->connectors_active = true; - - intel_crtc_update_dpms(encoder->base.crtc); - } else { - encoder->connectors_active = false; - - intel_crtc_update_dpms(encoder->base.crtc); - } -} - /* Cross check the actual hw state with our own modeset state tracking (and it's * internal consistency). */ static void intel_connector_check_state(struct intel_connector *connector) { + struct drm_crtc *crtc = connector->base.state->crtc; + + DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n", + connector->base.base.id, + connector->base.name); + if (connector->get_hw_state(connector)) { struct intel_encoder *encoder = connector->encoder; - struct drm_crtc *crtc; - bool encoder_enabled; - enum pipe pipe; + struct drm_connector_state *conn_state = connector->base.state; - DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n", - connector->base.base.id, - connector->base.name); + I915_STATE_WARN(!crtc, + "connector enabled without attached crtc\n"); - /* there is no real hw state for MST connectors */ - if (connector->mst_port) + if (!crtc) return; - I915_STATE_WARN(connector->base.dpms == DRM_MODE_DPMS_OFF, - "wrong connector dpms state\n"); - I915_STATE_WARN(connector->base.encoder != &encoder->base, - "active connector not linked to encoder\n"); + I915_STATE_WARN(!crtc->state->active, + "connector is active, but attached crtc isn't\n"); - if (encoder) { - I915_STATE_WARN(!encoder->connectors_active, - "encoder->connectors_active not set\n"); - - encoder_enabled = encoder->get_hw_state(encoder, &pipe); - I915_STATE_WARN(!encoder_enabled, "encoder not enabled\n"); - if (I915_STATE_WARN_ON(!encoder->base.crtc)) - return; + if (!encoder || encoder->type == INTEL_OUTPUT_DP_MST) + return; - crtc = encoder->base.crtc; + I915_STATE_WARN(conn_state->best_encoder != &encoder->base, + "atomic encoder doesn't match attached encoder\n"); - I915_STATE_WARN(!crtc->state->enable, - "crtc not enabled\n"); - I915_STATE_WARN(!to_intel_crtc(crtc)->active, "crtc not active\n"); - I915_STATE_WARN(pipe != to_intel_crtc(crtc)->pipe, - "encoder active on the wrong pipe\n"); - } + I915_STATE_WARN(conn_state->crtc != encoder->base.crtc, + "attached encoder crtc differs from connector crtc\n"); + } else { + I915_STATE_WARN(crtc && crtc->state->active, + "attached crtc is active, but connector isn't\n"); + I915_STATE_WARN(!crtc && connector->base.state->best_encoder, + "best encoder set without crtc!\n"); } } @@ -6432,26 +6361,6 @@ struct intel_connector *intel_connector_alloc(void) return connector; } -/* Even simpler default implementation, if there's really no special case to - * consider. */ -void intel_connector_dpms(struct drm_connector *connector, int mode) -{ - /* All the simple cases only support two dpms states. */ - if (mode != DRM_MODE_DPMS_ON) - mode = DRM_MODE_DPMS_OFF; - - if (mode == connector->dpms) - return; - - connector->dpms = mode; - - /* Only need to change hw state when actually enabled */ - if (connector->encoder) - intel_encoder_dpms(to_intel_encoder(connector->encoder), mode); - - intel_modeset_check_state(connector->dev); -} - /* Simple connector->get_hw_state implementation for encoders that support only * one connector and no cloning and hence the encoder state determines the state * of the connector. */ @@ -6589,12 +6498,36 @@ retry: return ret; } +static bool pipe_config_supports_ips(struct drm_i915_private *dev_priv, + struct intel_crtc_state *pipe_config) +{ + if (pipe_config->pipe_bpp > 24) + return false; + + /* HSW can handle pixel rate up to cdclk? */ + if (IS_HASWELL(dev_priv->dev)) + return true; + + /* + * We compare against max which means we must take + * the increased cdclk requirement into account when + * calculating the new cdclk. + * + * Should measure whether using a lower cdclk w/o IPS + */ + return ilk_pipe_pixel_rate(pipe_config) <= + dev_priv->max_cdclk_freq * 95 / 100; +} + static void hsw_compute_ips_config(struct intel_crtc *crtc, struct intel_crtc_state *pipe_config) { + struct drm_device *dev = crtc->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + pipe_config->ips_enabled = i915.enable_ips && - hsw_crtc_supports_ips(crtc) && - pipe_config->pipe_bpp <= 24; + hsw_crtc_supports_ips(crtc) && + pipe_config_supports_ips(dev_priv, pipe_config); } static int intel_crtc_compute_config(struct intel_crtc *crtc, @@ -6603,12 +6536,10 @@ static int intel_crtc_compute_config(struct intel_crtc *crtc, struct drm_device *dev = crtc->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode; - int ret; /* FIXME should check pixel clock limits on all platforms */ if (INTEL_INFO(dev)->gen < 4) { - int clock_limit = - dev_priv->display.get_display_clock_speed(dev); + int clock_limit = dev_priv->max_cdclk_freq; /* * Enable pixel doubling when the dot clock @@ -6650,14 +6581,7 @@ static int intel_crtc_compute_config(struct intel_crtc *crtc, if (pipe_config->has_pch_encoder) return ironlake_fdi_compute_config(crtc, pipe_config); - /* FIXME: remove below call once atomic mode set is place and all crtc - * related checks called from atomic_crtc_check function */ - ret = 0; - DRM_DEBUG_KMS("intel_crtc = %p drm_state (pipe_config->base.state) = %p\n", - crtc, pipe_config->base.state); - ret = intel_atomic_setup_scalers(dev, crtc, pipe_config); - - return ret; + return 0; } static int skylake_get_display_clock_speed(struct drm_device *dev) @@ -6667,10 +6591,8 @@ static int skylake_get_display_clock_speed(struct drm_device *dev) uint32_t cdctl = I915_READ(CDCLK_CTL); uint32_t linkrate; - if (!(lcpll1 & LCPLL_PLL_ENABLE)) { - WARN(1, "LCPLL1 not enabled\n"); + if (!(lcpll1 & LCPLL_PLL_ENABLE)) return 24000; /* 24MHz is the cd freq with NSSC ref */ - } if ((cdctl & CDCLK_FREQ_SEL_MASK) == CDCLK_FREQ_540) return 540000; @@ -6709,6 +6631,34 @@ static int skylake_get_display_clock_speed(struct drm_device *dev) return 24000; } +static int broxton_get_display_clock_speed(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = to_i915(dev); + uint32_t cdctl = I915_READ(CDCLK_CTL); + uint32_t pll_ratio = I915_READ(BXT_DE_PLL_CTL) & BXT_DE_PLL_RATIO_MASK; + uint32_t pll_enab = I915_READ(BXT_DE_PLL_ENABLE); + int cdclk; + + if (!(pll_enab & BXT_DE_PLL_PLL_ENABLE)) + return 19200; + + cdclk = 19200 * pll_ratio / 2; + + switch (cdctl & BXT_CDCLK_CD2X_DIV_SEL_MASK) { + case BXT_CDCLK_CD2X_DIV_SEL_1: + return cdclk; /* 576MHz or 624MHz */ + case BXT_CDCLK_CD2X_DIV_SEL_1_5: + return cdclk * 2 / 3; /* 384MHz */ + case BXT_CDCLK_CD2X_DIV_SEL_2: + return cdclk / 2; /* 288MHz */ + case BXT_CDCLK_CD2X_DIV_SEL_4: + return cdclk / 4; /* 144MHz */ + } + + /* error case, do as if DE PLL isn't enabled */ + return 19200; +} + static int broadwell_get_display_clock_speed(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; @@ -6837,20 +6787,37 @@ static int i865_get_display_clock_speed(struct drm_device *dev) return 266667; } -static int i855_get_display_clock_speed(struct drm_device *dev) +static int i85x_get_display_clock_speed(struct drm_device *dev) { u16 hpllcc = 0; + + /* + * 852GM/852GMV only supports 133 MHz and the HPLLCC + * encoding is different :( + * FIXME is this the right way to detect 852GM/852GMV? + */ + if (dev->pdev->revision == 0x1) + return 133333; + + pci_bus_read_config_word(dev->pdev->bus, + PCI_DEVFN(0, 3), HPLLCC, &hpllcc); + /* Assume that the hardware is in the high speed state. This * should be the default. */ switch (hpllcc & GC_CLOCK_CONTROL_MASK) { case GC_CLOCK_133_200: + case GC_CLOCK_133_200_2: case GC_CLOCK_100_200: return 200000; case GC_CLOCK_166_250: return 250000; case GC_CLOCK_100_133: return 133333; + case GC_CLOCK_133_266: + case GC_CLOCK_133_266_2: + case GC_CLOCK_166_266: + return 266667; } /* Shouldn't happen */ @@ -6862,6 +6829,175 @@ static int i830_get_display_clock_speed(struct drm_device *dev) return 133333; } +static unsigned int intel_hpll_vco(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + static const unsigned int blb_vco[8] = { + [0] = 3200000, + [1] = 4000000, + [2] = 5333333, + [3] = 4800000, + [4] = 6400000, + }; + static const unsigned int pnv_vco[8] = { + [0] = 3200000, + [1] = 4000000, + [2] = 5333333, + [3] = 4800000, + [4] = 2666667, + }; + static const unsigned int cl_vco[8] = { + [0] = 3200000, + [1] = 4000000, + [2] = 5333333, + [3] = 6400000, + [4] = 3333333, + [5] = 3566667, + [6] = 4266667, + }; + static const unsigned int elk_vco[8] = { + [0] = 3200000, + [1] = 4000000, + [2] = 5333333, + [3] = 4800000, + }; + static const unsigned int ctg_vco[8] = { + [0] = 3200000, + [1] = 4000000, + [2] = 5333333, + [3] = 6400000, + [4] = 2666667, + [5] = 4266667, + }; + const unsigned int *vco_table; + unsigned int vco; + uint8_t tmp = 0; + + /* FIXME other chipsets? */ + if (IS_GM45(dev)) + vco_table = ctg_vco; + else if (IS_G4X(dev)) + vco_table = elk_vco; + else if (IS_CRESTLINE(dev)) + vco_table = cl_vco; + else if (IS_PINEVIEW(dev)) + vco_table = pnv_vco; + else if (IS_G33(dev)) + vco_table = blb_vco; + else + return 0; + + tmp = I915_READ(IS_MOBILE(dev) ? HPLLVCO_MOBILE : HPLLVCO); + + vco = vco_table[tmp & 0x7]; + if (vco == 0) + DRM_ERROR("Bad HPLL VCO (HPLLVCO=0x%02x)\n", tmp); + else + DRM_DEBUG_KMS("HPLL VCO %u kHz\n", vco); + + return vco; +} + +static int gm45_get_display_clock_speed(struct drm_device *dev) +{ + unsigned int cdclk_sel, vco = intel_hpll_vco(dev); + uint16_t tmp = 0; + + pci_read_config_word(dev->pdev, GCFGC, &tmp); + + cdclk_sel = (tmp >> 12) & 0x1; + + switch (vco) { + case 2666667: + case 4000000: + case 5333333: + return cdclk_sel ? 333333 : 222222; + case 3200000: + return cdclk_sel ? 320000 : 228571; + default: + DRM_ERROR("Unable to determine CDCLK. HPLL VCO=%u, CFGC=0x%04x\n", vco, tmp); + return 222222; + } +} + +static int i965gm_get_display_clock_speed(struct drm_device *dev) +{ + static const uint8_t div_3200[] = { 16, 10, 8 }; + static const uint8_t div_4000[] = { 20, 12, 10 }; + static const uint8_t div_5333[] = { 24, 16, 14 }; + const uint8_t *div_table; + unsigned int cdclk_sel, vco = intel_hpll_vco(dev); + uint16_t tmp = 0; + + pci_read_config_word(dev->pdev, GCFGC, &tmp); + + cdclk_sel = ((tmp >> 8) & 0x1f) - 1; + + if (cdclk_sel >= ARRAY_SIZE(div_3200)) + goto fail; + + switch (vco) { + case 3200000: + div_table = div_3200; + break; + case 4000000: + div_table = div_4000; + break; + case 5333333: + div_table = div_5333; + break; + default: + goto fail; + } + + return DIV_ROUND_CLOSEST(vco, div_table[cdclk_sel]); + +fail: + DRM_ERROR("Unable to determine CDCLK. HPLL VCO=%u kHz, CFGC=0x%04x\n", vco, tmp); + return 200000; +} + +static int g33_get_display_clock_speed(struct drm_device *dev) +{ + static const uint8_t div_3200[] = { 12, 10, 8, 7, 5, 16 }; + static const uint8_t div_4000[] = { 14, 12, 10, 8, 6, 20 }; + static const uint8_t div_4800[] = { 20, 14, 12, 10, 8, 24 }; + static const uint8_t div_5333[] = { 20, 16, 12, 12, 8, 28 }; + const uint8_t *div_table; + unsigned int cdclk_sel, vco = intel_hpll_vco(dev); + uint16_t tmp = 0; + + pci_read_config_word(dev->pdev, GCFGC, &tmp); + + cdclk_sel = (tmp >> 4) & 0x7; + + if (cdclk_sel >= ARRAY_SIZE(div_3200)) + goto fail; + + switch (vco) { + case 3200000: + div_table = div_3200; + break; + case 4000000: + div_table = div_4000; + break; + case 4800000: + div_table = div_4800; + break; + case 5333333: + div_table = div_5333; + break; + default: + goto fail; + } + + return DIV_ROUND_CLOSEST(vco, div_table[cdclk_sel]); + +fail: + DRM_ERROR("Unable to determine CDCLK. HPLL VCO=%u kHz, CFGC=0x%08x\n", vco, tmp); + return 190476; +} + static void intel_reduce_m_n_ratio(uint32_t *num, uint32_t *den) { @@ -7067,8 +7203,8 @@ void intel_dp_set_m_n(struct intel_crtc *crtc, enum link_m_n_set m_n) intel_cpu_transcoder_set_m_n(crtc, dp_m_n, dp_m2_n2); } -static void vlv_update_pll(struct intel_crtc *crtc, - struct intel_crtc_state *pipe_config) +static void vlv_compute_dpll(struct intel_crtc *crtc, + struct intel_crtc_state *pipe_config) { u32 dpll, dpll_md; @@ -7077,8 +7213,8 @@ static void vlv_update_pll(struct intel_crtc *crtc, * clock for pipe B, since VGA hotplug / manual detection depends * on it. */ - dpll = DPLL_EXT_BUFFER_ENABLE_VLV | DPLL_REFA_CLK_ENABLE_VLV | - DPLL_VGA_MODE_DIS | DPLL_INTEGRATED_CLOCK_VLV; + dpll = DPLL_EXT_BUFFER_ENABLE_VLV | DPLL_REF_CLK_ENABLE_VLV | + DPLL_VGA_MODE_DIS | DPLL_INTEGRATED_REF_CLK_VLV; /* We should never disable this, set it here for state tracking */ if (crtc->pipe == PIPE_B) dpll |= DPLL_INTEGRATED_CRI_CLK_VLV; @@ -7181,11 +7317,11 @@ static void vlv_prepare_pll(struct intel_crtc *crtc, mutex_unlock(&dev_priv->sb_lock); } -static void chv_update_pll(struct intel_crtc *crtc, - struct intel_crtc_state *pipe_config) +static void chv_compute_dpll(struct intel_crtc *crtc, + struct intel_crtc_state *pipe_config) { - pipe_config->dpll_hw_state.dpll = DPLL_SSC_REF_CLOCK_CHV | - DPLL_REFA_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS | + pipe_config->dpll_hw_state.dpll = DPLL_SSC_REF_CLK_CHV | + DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS | DPLL_VCO_ENABLE; if (crtc->pipe != PIPE_A) pipe_config->dpll_hw_state.dpll |= DPLL_INTEGRATED_CRI_CLK_VLV; @@ -7321,11 +7457,11 @@ void vlv_force_pll_on(struct drm_device *dev, enum pipe pipe, }; if (IS_CHERRYVIEW(dev)) { - chv_update_pll(crtc, &pipe_config); + chv_compute_dpll(crtc, &pipe_config); chv_prepare_pll(crtc, &pipe_config); chv_enable_pll(crtc, &pipe_config); } else { - vlv_update_pll(crtc, &pipe_config); + vlv_compute_dpll(crtc, &pipe_config); vlv_prepare_pll(crtc, &pipe_config); vlv_enable_pll(crtc, &pipe_config); } @@ -7347,10 +7483,10 @@ void vlv_force_pll_off(struct drm_device *dev, enum pipe pipe) vlv_disable_pll(to_i915(dev), pipe); } -static void i9xx_update_pll(struct intel_crtc *crtc, - struct intel_crtc_state *crtc_state, - intel_clock_t *reduced_clock, - int num_connectors) +static void i9xx_compute_dpll(struct intel_crtc *crtc, + struct intel_crtc_state *crtc_state, + intel_clock_t *reduced_clock, + int num_connectors) { struct drm_device *dev = crtc->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; @@ -7424,10 +7560,10 @@ static void i9xx_update_pll(struct intel_crtc *crtc, } } -static void i8xx_update_pll(struct intel_crtc *crtc, - struct intel_crtc_state *crtc_state, - intel_clock_t *reduced_clock, - int num_connectors) +static void i8xx_compute_dpll(struct intel_crtc *crtc, + struct intel_crtc_state *crtc_state, + intel_clock_t *reduced_clock, + int num_connectors) { struct drm_device *dev = crtc->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; @@ -7587,9 +7723,14 @@ void intel_mode_from_pipe_config(struct drm_display_mode *mode, mode->vsync_end = pipe_config->base.adjusted_mode.crtc_vsync_end; mode->flags = pipe_config->base.adjusted_mode.flags; + mode->type = DRM_MODE_TYPE_DRIVER; mode->clock = pipe_config->base.adjusted_mode.crtc_clock; mode->flags |= pipe_config->base.adjusted_mode.flags; + + mode->hsync = drm_mode_hsync(mode); + mode->vrefresh = drm_mode_vrefresh(mode); + drm_mode_set_name(mode); } static void i9xx_set_pipeconf(struct intel_crtc *intel_crtc) @@ -7661,9 +7802,9 @@ static int i9xx_crtc_compute_clock(struct intel_crtc *crtc, struct drm_device *dev = crtc->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; int refclk, num_connectors = 0; - intel_clock_t clock, reduced_clock; - bool ok, has_reduced_clock = false; - bool is_lvds = false, is_dsi = false; + intel_clock_t clock; + bool ok; + bool is_dsi = false; struct intel_encoder *encoder; const intel_limit_t *limit; struct drm_atomic_state *state = crtc_state->base.state; @@ -7681,9 +7822,6 @@ static int i9xx_crtc_compute_clock(struct intel_crtc *crtc, encoder = to_intel_encoder(connector_state->best_encoder); switch (encoder->type) { - case INTEL_OUTPUT_LVDS: - is_lvds = true; - break; case INTEL_OUTPUT_DSI: is_dsi = true; break; @@ -7715,19 +7853,6 @@ static int i9xx_crtc_compute_clock(struct intel_crtc *crtc, return -EINVAL; } - if (is_lvds && dev_priv->lvds_downclock_avail) { - /* - * Ensure we match the reduced clock's P to the target - * clock. If the clocks don't match, we can't switch - * the display clock by using the FP0/FP1. In such case - * we will disable the LVDS downclock feature. - */ - has_reduced_clock = - dev_priv->display.find_dpll(limit, crtc_state, - dev_priv->lvds_downclock, - refclk, &clock, - &reduced_clock); - } /* Compat-code for transition, will disappear. */ crtc_state->dpll.n = clock.n; crtc_state->dpll.m1 = clock.m1; @@ -7737,17 +7862,15 @@ static int i9xx_crtc_compute_clock(struct intel_crtc *crtc, } if (IS_GEN2(dev)) { - i8xx_update_pll(crtc, crtc_state, - has_reduced_clock ? &reduced_clock : NULL, - num_connectors); + i8xx_compute_dpll(crtc, crtc_state, NULL, + num_connectors); } else if (IS_CHERRYVIEW(dev)) { - chv_update_pll(crtc, crtc_state); + chv_compute_dpll(crtc, crtc_state); } else if (IS_VALLEYVIEW(dev)) { - vlv_update_pll(crtc, crtc_state); + vlv_compute_dpll(crtc, crtc_state); } else { - i9xx_update_pll(crtc, crtc_state, - has_reduced_clock ? &reduced_clock : NULL, - num_connectors); + i9xx_compute_dpll(crtc, crtc_state, NULL, + num_connectors); } return 0; @@ -7807,10 +7930,7 @@ static void vlv_crtc_clock_get(struct intel_crtc *crtc, clock.p1 = (mdiv >> DPIO_P1_SHIFT) & 7; clock.p2 = (mdiv >> DPIO_P2_SHIFT) & 0x1f; - vlv_clock(refclk, &clock); - - /* clock.dot is the fast clock */ - pipe_config->port_clock = clock.dot / 5; + pipe_config->port_clock = vlv_calc_dpll_params(refclk, &clock); } static void @@ -7909,10 +8029,7 @@ static void chv_crtc_clock_get(struct intel_crtc *crtc, clock.p1 = (cmn_dw13 >> DPIO_CHV_P1_DIV_SHIFT) & 0x7; clock.p2 = (cmn_dw13 >> DPIO_CHV_P2_DIV_SHIFT) & 0x1f; - chv_clock(refclk, &clock); - - /* clock.dot is the fast clock */ - pipe_config->port_clock = clock.dot / 5; + pipe_config->port_clock = chv_calc_dpll_params(refclk, &clock); } static bool i9xx_get_pipe_config(struct intel_crtc *crtc, @@ -8561,9 +8678,7 @@ static bool ironlake_compute_clocks(struct drm_crtc *crtc, struct drm_i915_private *dev_priv = dev->dev_private; int refclk; const intel_limit_t *limit; - bool ret, is_lvds = false; - - is_lvds = intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS); + bool ret; refclk = ironlake_get_refclk(crtc_state); @@ -8579,20 +8694,6 @@ static bool ironlake_compute_clocks(struct drm_crtc *crtc, if (!ret) return false; - if (is_lvds && dev_priv->lvds_downclock_avail) { - /* - * Ensure we match the reduced clock's P to the target clock. - * If the clocks don't match, we can't switch the display clock - * by using the FP0/FP1. In such case we will disable the LVDS - * downclock feature. - */ - *has_reduced_clock = - dev_priv->display.find_dpll(limit, crtc_state, - dev_priv->lvds_downclock, - refclk, clock, - reduced_clock); - } - return true; } @@ -9300,6 +9401,7 @@ static void hsw_restore_lcpll(struct drm_i915_private *dev_priv) } intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL); + intel_update_cdclk(dev_priv->dev); } /* @@ -9361,21 +9463,160 @@ void hsw_disable_pc8(struct drm_i915_private *dev_priv) intel_prepare_ddi(dev); } -static void broxton_modeset_global_resources(struct drm_atomic_state *old_state) +static void broxton_modeset_commit_cdclk(struct drm_atomic_state *old_state) { struct drm_device *dev = old_state->dev; + unsigned int req_cdclk = to_intel_atomic_state(old_state)->cdclk; + + broxton_set_cdclk(dev, req_cdclk); +} + +/* compute the max rate for new configuration */ +static int ilk_max_pixel_rate(struct drm_atomic_state *state) +{ + struct intel_crtc *intel_crtc; + struct intel_crtc_state *crtc_state; + int max_pixel_rate = 0; + + for_each_intel_crtc(state->dev, intel_crtc) { + int pixel_rate; + + crtc_state = intel_atomic_get_crtc_state(state, intel_crtc); + if (IS_ERR(crtc_state)) + return PTR_ERR(crtc_state); + + if (!crtc_state->base.enable) + continue; + + pixel_rate = ilk_pipe_pixel_rate(crtc_state); + + /* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */ + if (IS_BROADWELL(state->dev) && crtc_state->ips_enabled) + pixel_rate = DIV_ROUND_UP(pixel_rate * 100, 95); + + max_pixel_rate = max(max_pixel_rate, pixel_rate); + } + + return max_pixel_rate; +} + +static void broadwell_set_cdclk(struct drm_device *dev, int cdclk) +{ struct drm_i915_private *dev_priv = dev->dev_private; - int max_pixclk = intel_mode_max_pixclk(dev, NULL); - int req_cdclk; + uint32_t val, data; + int ret; - /* see the comment in valleyview_modeset_global_resources */ - if (WARN_ON(max_pixclk < 0)) + if (WARN((I915_READ(LCPLL_CTL) & + (LCPLL_PLL_DISABLE | LCPLL_PLL_LOCK | + LCPLL_CD_CLOCK_DISABLE | LCPLL_ROOT_CD_CLOCK_DISABLE | + LCPLL_CD2X_CLOCK_DISABLE | LCPLL_POWER_DOWN_ALLOW | + LCPLL_CD_SOURCE_FCLK)) != LCPLL_PLL_LOCK, + "trying to change cdclk frequency with cdclk not enabled\n")) return; - req_cdclk = broxton_calc_cdclk(dev_priv, max_pixclk); + mutex_lock(&dev_priv->rps.hw_lock); + ret = sandybridge_pcode_write(dev_priv, + BDW_PCODE_DISPLAY_FREQ_CHANGE_REQ, 0x0); + mutex_unlock(&dev_priv->rps.hw_lock); + if (ret) { + DRM_ERROR("failed to inform pcode about cdclk change\n"); + return; + } + + val = I915_READ(LCPLL_CTL); + val |= LCPLL_CD_SOURCE_FCLK; + I915_WRITE(LCPLL_CTL, val); + + if (wait_for_atomic_us(I915_READ(LCPLL_CTL) & + LCPLL_CD_SOURCE_FCLK_DONE, 1)) + DRM_ERROR("Switching to FCLK failed\n"); + + val = I915_READ(LCPLL_CTL); + val &= ~LCPLL_CLK_FREQ_MASK; + + switch (cdclk) { + case 450000: + val |= LCPLL_CLK_FREQ_450; + data = 0; + break; + case 540000: + val |= LCPLL_CLK_FREQ_54O_BDW; + data = 1; + break; + case 337500: + val |= LCPLL_CLK_FREQ_337_5_BDW; + data = 2; + break; + case 675000: + val |= LCPLL_CLK_FREQ_675_BDW; + data = 3; + break; + default: + WARN(1, "invalid cdclk frequency\n"); + return; + } + + I915_WRITE(LCPLL_CTL, val); + + val = I915_READ(LCPLL_CTL); + val &= ~LCPLL_CD_SOURCE_FCLK; + I915_WRITE(LCPLL_CTL, val); + + if (wait_for_atomic_us((I915_READ(LCPLL_CTL) & + LCPLL_CD_SOURCE_FCLK_DONE) == 0, 1)) + DRM_ERROR("Switching back to LCPLL failed\n"); - if (req_cdclk != dev_priv->cdclk_freq) - broxton_set_cdclk(dev, req_cdclk); + mutex_lock(&dev_priv->rps.hw_lock); + sandybridge_pcode_write(dev_priv, HSW_PCODE_DE_WRITE_FREQ_REQ, data); + mutex_unlock(&dev_priv->rps.hw_lock); + + intel_update_cdclk(dev); + + WARN(cdclk != dev_priv->cdclk_freq, + "cdclk requested %d kHz but got %d kHz\n", + cdclk, dev_priv->cdclk_freq); +} + +static int broadwell_modeset_calc_cdclk(struct drm_atomic_state *state) +{ + struct drm_i915_private *dev_priv = to_i915(state->dev); + int max_pixclk = ilk_max_pixel_rate(state); + int cdclk; + + /* + * FIXME should also account for plane ratio + * once 64bpp pixel formats are supported. + */ + if (max_pixclk > 540000) + cdclk = 675000; + else if (max_pixclk > 450000) + cdclk = 540000; + else if (max_pixclk > 337500) + cdclk = 450000; + else + cdclk = 337500; + + /* + * FIXME move the cdclk caclulation to + * compute_config() so we can fail gracegully. + */ + if (cdclk > dev_priv->max_cdclk_freq) { + DRM_ERROR("requested cdclk (%d kHz) exceeds max (%d kHz)\n", + cdclk, dev_priv->max_cdclk_freq); + cdclk = dev_priv->max_cdclk_freq; + } + + to_intel_atomic_state(state)->cdclk = cdclk; + + return 0; +} + +static void broadwell_modeset_commit_cdclk(struct drm_atomic_state *old_state) +{ + struct drm_device *dev = old_state->dev; + unsigned int req_cdclk = to_intel_atomic_state(old_state)->cdclk; + + broadwell_set_cdclk(dev, req_cdclk); } static int haswell_crtc_compute_clock(struct intel_crtc *crtc, @@ -9892,7 +10133,7 @@ static struct drm_framebuffer * mode_fits_in_fbdev(struct drm_device *dev, struct drm_display_mode *mode) { -#ifdef CONFIG_DRM_I915_FBDEV +#ifdef CONFIG_DRM_FBDEV_EMULATION struct drm_i915_private *dev_priv = dev->dev_private; struct drm_i915_gem_object *obj; struct drm_framebuffer *fb; @@ -9981,7 +10222,7 @@ bool intel_get_load_detect_pipe(struct drm_connector *connector, retry: ret = drm_modeset_lock(&config->connection_mutex, ctx); if (ret) - goto fail_unlock; + goto fail; /* * Algorithm gets a little messy: @@ -9999,10 +10240,10 @@ retry: ret = drm_modeset_lock(&crtc->mutex, ctx); if (ret) - goto fail_unlock; + goto fail; ret = drm_modeset_lock(&crtc->primary->mutex, ctx); if (ret) - goto fail_unlock; + goto fail; old->dpms_mode = connector->dpms; old->load_detect_temp = false; @@ -10021,9 +10262,6 @@ retry: continue; if (possible_crtc->state->enable) continue; - /* This can occur when applying the pipe A quirk on resume. */ - if (to_intel_crtc(possible_crtc)->new_enabled) - continue; crtc = possible_crtc; break; @@ -10034,20 +10272,17 @@ retry: */ if (!crtc) { DRM_DEBUG_KMS("no pipe available for load-detect\n"); - goto fail_unlock; + goto fail; } ret = drm_modeset_lock(&crtc->mutex, ctx); if (ret) - goto fail_unlock; + goto fail; ret = drm_modeset_lock(&crtc->primary->mutex, ctx); if (ret) - goto fail_unlock; - intel_encoder->new_crtc = to_intel_crtc(crtc); - to_intel_connector(connector)->new_encoder = intel_encoder; + goto fail; intel_crtc = to_intel_crtc(crtc); - intel_crtc->new_enabled = true; old->dpms_mode = connector->dpms; old->load_detect_temp = true; old->release_fb = NULL; @@ -10103,7 +10338,7 @@ retry: drm_mode_copy(&crtc_state->base.mode, mode); - if (intel_set_mode(crtc, state, true)) { + if (drm_atomic_commit(state)) { DRM_DEBUG_KMS("failed to set mode on load-detect pipe\n"); if (old->release_fb) old->release_fb->funcs->destroy(old->release_fb); @@ -10115,9 +10350,7 @@ retry: intel_wait_for_vblank(dev, intel_crtc->pipe); return true; - fail: - intel_crtc->new_enabled = crtc->state->enable; -fail_unlock: +fail: drm_atomic_state_free(state); state = NULL; @@ -10163,10 +10396,6 @@ void intel_release_load_detect_pipe(struct drm_connector *connector, if (IS_ERR(crtc_state)) goto fail; - to_intel_connector(connector)->new_encoder = NULL; - intel_encoder->new_crtc = NULL; - intel_crtc->new_enabled = false; - connector_state->best_encoder = NULL; connector_state->crtc = NULL; @@ -10177,7 +10406,7 @@ void intel_release_load_detect_pipe(struct drm_connector *connector, if (ret) goto fail; - ret = intel_set_mode(crtc, state, true); + ret = drm_atomic_commit(state); if (ret) goto fail; @@ -10225,6 +10454,7 @@ static void i9xx_crtc_clock_get(struct intel_crtc *crtc, u32 dpll = pipe_config->dpll_hw_state.dpll; u32 fp; intel_clock_t clock; + int port_clock; int refclk = i9xx_pll_refclk(dev, pipe_config); if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0) @@ -10265,9 +10495,9 @@ static void i9xx_crtc_clock_get(struct intel_crtc *crtc, } if (IS_PINEVIEW(dev)) - pineview_clock(refclk, &clock); + port_clock = pnv_calc_dpll_params(refclk, &clock); else - i9xx_clock(refclk, &clock); + port_clock = i9xx_calc_dpll_params(refclk, &clock); } else { u32 lvds = IS_I830(dev) ? 0 : I915_READ(LVDS); bool is_lvds = (pipe == 1) && (lvds & LVDS_PORT_EN); @@ -10293,7 +10523,7 @@ static void i9xx_crtc_clock_get(struct intel_crtc *crtc, clock.p2 = 2; } - i9xx_clock(refclk, &clock); + port_clock = i9xx_calc_dpll_params(refclk, &clock); } /* @@ -10301,7 +10531,7 @@ static void i9xx_crtc_clock_get(struct intel_crtc *crtc, * port_clock to compute adjusted_mode.crtc_clock in the * encoder's get_config() function. */ - pipe_config->port_clock = clock.dot; + pipe_config->port_clock = port_clock; } int intel_dotclock_calculate(int link_freq, @@ -10390,42 +10620,6 @@ struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev, return mode; } -static void intel_decrease_pllclock(struct drm_crtc *crtc) -{ - struct drm_device *dev = crtc->dev; - struct drm_i915_private *dev_priv = dev->dev_private; - struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - - if (!HAS_GMCH_DISPLAY(dev)) - return; - - if (!dev_priv->lvds_downclock_avail) - return; - - /* - * Since this is called by a timer, we should never get here in - * the manual case. - */ - if (!HAS_PIPE_CXSR(dev) && intel_crtc->lowfreq_avail) { - int pipe = intel_crtc->pipe; - int dpll_reg = DPLL(pipe); - int dpll; - - DRM_DEBUG_DRIVER("downclocking LVDS\n"); - - assert_panel_unlocked(dev_priv, pipe); - - dpll = I915_READ(dpll_reg); - dpll |= DISPLAY_RATE_SELECT_FPA1; - I915_WRITE(dpll_reg, dpll); - intel_wait_for_vblank(dev, pipe); - dpll = I915_READ(dpll_reg); - if (!(dpll & DISPLAY_RATE_SELECT_FPA1)) - DRM_DEBUG_DRIVER("failed to downclock LVDS!\n"); - } - -} - void intel_mark_busy(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; @@ -10443,20 +10637,12 @@ void intel_mark_busy(struct drm_device *dev) void intel_mark_idle(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; - struct drm_crtc *crtc; if (!dev_priv->mm.busy) return; dev_priv->mm.busy = false; - for_each_crtc(dev, crtc) { - if (!crtc->primary->fb) - continue; - - intel_decrease_pllclock(crtc); - } - if (INTEL_INFO(dev)->gen >= 6) gen6_rps_idle(dev->dev_private); @@ -10488,24 +10674,23 @@ static void intel_unpin_work_fn(struct work_struct *__work) { struct intel_unpin_work *work = container_of(__work, struct intel_unpin_work, work); - struct drm_device *dev = work->crtc->dev; - enum pipe pipe = to_intel_crtc(work->crtc)->pipe; + struct intel_crtc *crtc = to_intel_crtc(work->crtc); + struct drm_device *dev = crtc->base.dev; + struct drm_plane *primary = crtc->base.primary; mutex_lock(&dev->struct_mutex); - intel_unpin_fb_obj(work->old_fb, work->crtc->primary->state); + intel_unpin_fb_obj(work->old_fb, primary->state); drm_gem_object_unreference(&work->pending_flip_obj->base); - intel_fbc_update(dev); - if (work->flip_queued_req) i915_gem_request_assign(&work->flip_queued_req, NULL); mutex_unlock(&dev->struct_mutex); - intel_frontbuffer_flip_complete(dev, INTEL_FRONTBUFFER_PRIMARY(pipe)); + intel_frontbuffer_flip_complete(dev, to_intel_plane(primary)->frontbuffer_bit); drm_framebuffer_unreference(work->old_fb); - BUG_ON(atomic_read(&to_intel_crtc(work->crtc)->unpin_work_count) == 0); - atomic_dec(&to_intel_crtc(work->crtc)->unpin_work_count); + BUG_ON(atomic_read(&crtc->unpin_work_count) == 0); + atomic_dec(&crtc->unpin_work_count); kfree(work); } @@ -10638,14 +10823,15 @@ static int intel_gen2_queue_flip(struct drm_device *dev, struct drm_crtc *crtc, struct drm_framebuffer *fb, struct drm_i915_gem_object *obj, - struct intel_engine_cs *ring, + struct drm_i915_gem_request *req, uint32_t flags) { + struct intel_engine_cs *ring = req->ring; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); u32 flip_mask; int ret; - ret = intel_ring_begin(ring, 6); + ret = intel_ring_begin(req, 6); if (ret) return ret; @@ -10665,7 +10851,6 @@ static int intel_gen2_queue_flip(struct drm_device *dev, intel_ring_emit(ring, 0); /* aux display base address, unused */ intel_mark_page_flip_active(intel_crtc); - __intel_ring_advance(ring); return 0; } @@ -10673,14 +10858,15 @@ static int intel_gen3_queue_flip(struct drm_device *dev, struct drm_crtc *crtc, struct drm_framebuffer *fb, struct drm_i915_gem_object *obj, - struct intel_engine_cs *ring, + struct drm_i915_gem_request *req, uint32_t flags) { + struct intel_engine_cs *ring = req->ring; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); u32 flip_mask; int ret; - ret = intel_ring_begin(ring, 6); + ret = intel_ring_begin(req, 6); if (ret) return ret; @@ -10697,7 +10883,6 @@ static int intel_gen3_queue_flip(struct drm_device *dev, intel_ring_emit(ring, MI_NOOP); intel_mark_page_flip_active(intel_crtc); - __intel_ring_advance(ring); return 0; } @@ -10705,15 +10890,16 @@ static int intel_gen4_queue_flip(struct drm_device *dev, struct drm_crtc *crtc, struct drm_framebuffer *fb, struct drm_i915_gem_object *obj, - struct intel_engine_cs *ring, + struct drm_i915_gem_request *req, uint32_t flags) { + struct intel_engine_cs *ring = req->ring; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); uint32_t pf, pipesrc; int ret; - ret = intel_ring_begin(ring, 4); + ret = intel_ring_begin(req, 4); if (ret) return ret; @@ -10736,7 +10922,6 @@ static int intel_gen4_queue_flip(struct drm_device *dev, intel_ring_emit(ring, pf | pipesrc); intel_mark_page_flip_active(intel_crtc); - __intel_ring_advance(ring); return 0; } @@ -10744,15 +10929,16 @@ static int intel_gen6_queue_flip(struct drm_device *dev, struct drm_crtc *crtc, struct drm_framebuffer *fb, struct drm_i915_gem_object *obj, - struct intel_engine_cs *ring, + struct drm_i915_gem_request *req, uint32_t flags) { + struct intel_engine_cs *ring = req->ring; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); uint32_t pf, pipesrc; int ret; - ret = intel_ring_begin(ring, 4); + ret = intel_ring_begin(req, 4); if (ret) return ret; @@ -10772,7 +10958,6 @@ static int intel_gen6_queue_flip(struct drm_device *dev, intel_ring_emit(ring, pf | pipesrc); intel_mark_page_flip_active(intel_crtc); - __intel_ring_advance(ring); return 0; } @@ -10780,9 +10965,10 @@ static int intel_gen7_queue_flip(struct drm_device *dev, struct drm_crtc *crtc, struct drm_framebuffer *fb, struct drm_i915_gem_object *obj, - struct intel_engine_cs *ring, + struct drm_i915_gem_request *req, uint32_t flags) { + struct intel_engine_cs *ring = req->ring; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); uint32_t plane_bit = 0; int len, ret; @@ -10824,11 +11010,11 @@ static int intel_gen7_queue_flip(struct drm_device *dev, * then do the cacheline alignment, and finally emit the * MI_DISPLAY_FLIP. */ - ret = intel_ring_cacheline_align(ring); + ret = intel_ring_cacheline_align(req); if (ret) return ret; - ret = intel_ring_begin(ring, len); + ret = intel_ring_begin(req, len); if (ret) return ret; @@ -10867,7 +11053,6 @@ static int intel_gen7_queue_flip(struct drm_device *dev, intel_ring_emit(ring, (MI_NOOP)); intel_mark_page_flip_active(intel_crtc); - __intel_ring_advance(ring); return 0; } @@ -10976,12 +11161,11 @@ static void ilk_do_mmio_flip(struct intel_crtc *intel_crtc) static void intel_do_mmio_flip(struct intel_crtc *intel_crtc) { struct drm_device *dev = intel_crtc->base.dev; - bool atomic_update; u32 start_vbl_count; intel_mark_page_flip_active(intel_crtc); - atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count); + intel_pipe_update_start(intel_crtc, &start_vbl_count); if (INTEL_INFO(dev)->gen >= 9) skl_do_mmio_flip(intel_crtc); @@ -10989,8 +11173,7 @@ static void intel_do_mmio_flip(struct intel_crtc *intel_crtc) /* use_mmio_flip() retricts MMIO flips to ilk+ */ ilk_do_mmio_flip(intel_crtc); - if (atomic_update) - intel_pipe_update_end(intel_crtc, start_vbl_count); + intel_pipe_update_end(intel_crtc, start_vbl_count); } static void intel_mmio_flip_work_func(struct work_struct *work) @@ -11037,7 +11220,7 @@ static int intel_default_queue_flip(struct drm_device *dev, struct drm_crtc *crtc, struct drm_framebuffer *fb, struct drm_i915_gem_object *obj, - struct intel_engine_cs *ring, + struct drm_i915_gem_request *req, uint32_t flags) { return -ENODEV; @@ -11123,6 +11306,7 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc, struct intel_unpin_work *work; struct intel_engine_cs *ring; bool mmio_flip; + struct drm_i915_gem_request *request = NULL; int ret; /* @@ -11229,7 +11413,7 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc, */ ret = intel_pin_and_fence_fb_obj(crtc->primary, fb, crtc->primary->state, - mmio_flip ? i915_gem_request_get_ring(obj->last_write_req) : ring); + mmio_flip ? i915_gem_request_get_ring(obj->last_write_req) : ring, &request); if (ret) goto cleanup_pending; @@ -11245,31 +11429,34 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc, i915_gem_request_assign(&work->flip_queued_req, obj->last_write_req); } else { - if (obj->last_write_req) { - ret = i915_gem_check_olr(obj->last_write_req); + if (!request) { + ret = i915_gem_request_alloc(ring, ring->default_context, &request); if (ret) goto cleanup_unpin; } - ret = dev_priv->display.queue_flip(dev, crtc, fb, obj, ring, + ret = dev_priv->display.queue_flip(dev, crtc, fb, obj, request, page_flip_flags); if (ret) goto cleanup_unpin; - i915_gem_request_assign(&work->flip_queued_req, - intel_ring_get_request(ring)); + i915_gem_request_assign(&work->flip_queued_req, request); } + if (request) + i915_add_request_no_flush(request); + work->flip_queued_vblank = drm_crtc_vblank_count(crtc); work->enable_stall_check = true; i915_gem_track_fb(intel_fb_obj(work->old_fb), obj, - INTEL_FRONTBUFFER_PRIMARY(pipe)); - - intel_fbc_disable(dev); - intel_frontbuffer_flip_prepare(dev, INTEL_FRONTBUFFER_PRIMARY(pipe)); + to_intel_plane(primary)->frontbuffer_bit); mutex_unlock(&dev->struct_mutex); + intel_fbc_disable_crtc(intel_crtc); + intel_frontbuffer_flip_prepare(dev, + to_intel_plane(primary)->frontbuffer_bit); + trace_i915_flip_request(intel_crtc->plane, obj); return 0; @@ -11277,6 +11464,8 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc, cleanup_unpin: intel_unpin_fb_obj(fb, crtc->primary->state); cleanup_pending: + if (request) + i915_gem_request_cancel(request); atomic_dec(&intel_crtc->unpin_work_count); mutex_unlock(&dev->struct_mutex); cleanup: @@ -11295,8 +11484,35 @@ free_work: kfree(work); if (ret == -EIO) { + struct drm_atomic_state *state; + struct drm_plane_state *plane_state; + out_hang: - ret = intel_plane_restore(primary); + state = drm_atomic_state_alloc(dev); + if (!state) + return -ENOMEM; + state->acquire_ctx = drm_modeset_legacy_acquire_ctx(crtc); + +retry: + plane_state = drm_atomic_get_plane_state(state, primary); + ret = PTR_ERR_OR_ZERO(plane_state); + if (!ret) { + drm_atomic_set_fb_for_plane(plane_state, fb); + + ret = drm_atomic_set_crtc_for_plane(plane_state, crtc); + if (!ret) + ret = drm_atomic_commit(state); + } + + if (ret == -EDEADLK) { + drm_modeset_backoff(state->acquire_ctx); + drm_atomic_state_clear(state); + goto retry; + } + + if (ret) + drm_atomic_state_free(state); + if (ret == 0 && event) { spin_lock_irq(&dev->event_lock); drm_send_vblank_event(dev, pipe, event); @@ -11306,44 +11522,274 @@ out_hang: return ret; } -static const struct drm_crtc_helper_funcs intel_helper_funcs = { - .mode_set_base_atomic = intel_pipe_set_base_atomic, - .load_lut = intel_crtc_load_lut, - .atomic_begin = intel_begin_crtc_commit, - .atomic_flush = intel_finish_crtc_commit, -}; /** - * intel_modeset_update_staged_output_state + * intel_wm_need_update - Check whether watermarks need updating + * @plane: drm plane + * @state: new plane state * - * Updates the staged output configuration state, e.g. after we've read out the - * current hw state. + * Check current plane state versus the new one to determine whether + * watermarks need to be recalculated. + * + * Returns true or false. */ -static void intel_modeset_update_staged_output_state(struct drm_device *dev) +static bool intel_wm_need_update(struct drm_plane *plane, + struct drm_plane_state *state) +{ + /* Update watermarks on tiling changes. */ + if (!plane->state->fb || !state->fb || + plane->state->fb->modifier[0] != state->fb->modifier[0] || + plane->state->rotation != state->rotation) + return true; + + if (plane->state->crtc_w != state->crtc_w) + return true; + + return false; +} + +int intel_plane_atomic_calc_changes(struct drm_crtc_state *crtc_state, + struct drm_plane_state *plane_state) +{ + struct drm_crtc *crtc = crtc_state->crtc; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + struct drm_plane *plane = plane_state->plane; + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_plane_state *old_plane_state = + to_intel_plane_state(plane->state); + int idx = intel_crtc->base.base.id, ret; + int i = drm_plane_index(plane); + bool mode_changed = needs_modeset(crtc_state); + bool was_crtc_enabled = crtc->state->active; + bool is_crtc_enabled = crtc_state->active; + + bool turn_off, turn_on, visible, was_visible; + struct drm_framebuffer *fb = plane_state->fb; + + if (crtc_state && INTEL_INFO(dev)->gen >= 9 && + plane->type != DRM_PLANE_TYPE_CURSOR) { + ret = skl_update_scaler_plane( + to_intel_crtc_state(crtc_state), + to_intel_plane_state(plane_state)); + if (ret) + return ret; + } + + /* + * Disabling a plane is always okay; we just need to update + * fb tracking in a special way since cleanup_fb() won't + * get called by the plane helpers. + */ + if (old_plane_state->base.fb && !fb) + intel_crtc->atomic.disabled_planes |= 1 << i; + + was_visible = old_plane_state->visible; + visible = to_intel_plane_state(plane_state)->visible; + + if (!was_crtc_enabled && WARN_ON(was_visible)) + was_visible = false; + + if (!is_crtc_enabled && WARN_ON(visible)) + visible = false; + + if (!was_visible && !visible) + return 0; + + turn_off = was_visible && (!visible || mode_changed); + turn_on = visible && (!was_visible || mode_changed); + + DRM_DEBUG_ATOMIC("[CRTC:%i] has [PLANE:%i] with fb %i\n", idx, + plane->base.id, fb ? fb->base.id : -1); + + DRM_DEBUG_ATOMIC("[PLANE:%i] visible %i -> %i, off %i, on %i, ms %i\n", + plane->base.id, was_visible, visible, + turn_off, turn_on, mode_changed); + + if (turn_on) { + intel_crtc->atomic.update_wm_pre = true; + /* must disable cxsr around plane enable/disable */ + if (plane->type != DRM_PLANE_TYPE_CURSOR) { + intel_crtc->atomic.disable_cxsr = true; + /* to potentially re-enable cxsr */ + intel_crtc->atomic.wait_vblank = true; + intel_crtc->atomic.update_wm_post = true; + } + } else if (turn_off) { + intel_crtc->atomic.update_wm_post = true; + /* must disable cxsr around plane enable/disable */ + if (plane->type != DRM_PLANE_TYPE_CURSOR) { + if (is_crtc_enabled) + intel_crtc->atomic.wait_vblank = true; + intel_crtc->atomic.disable_cxsr = true; + } + } else if (intel_wm_need_update(plane, plane_state)) { + intel_crtc->atomic.update_wm_pre = true; + } + + if (visible) + intel_crtc->atomic.fb_bits |= + to_intel_plane(plane)->frontbuffer_bit; + + switch (plane->type) { + case DRM_PLANE_TYPE_PRIMARY: + intel_crtc->atomic.wait_for_flips = true; + intel_crtc->atomic.pre_disable_primary = turn_off; + intel_crtc->atomic.post_enable_primary = turn_on; + + if (turn_off) { + /* + * FIXME: Actually if we will still have any other + * plane enabled on the pipe we could let IPS enabled + * still, but for now lets consider that when we make + * primary invisible by setting DSPCNTR to 0 on + * update_primary_plane function IPS needs to be + * disable. + */ + intel_crtc->atomic.disable_ips = true; + + intel_crtc->atomic.disable_fbc = true; + } + + /* + * FBC does not work on some platforms for rotated + * planes, so disable it when rotation is not 0 and + * update it when rotation is set back to 0. + * + * FIXME: This is redundant with the fbc update done in + * the primary plane enable function except that that + * one is done too late. We eventually need to unify + * this. + */ + + if (visible && + INTEL_INFO(dev)->gen <= 4 && !IS_G4X(dev) && + dev_priv->fbc.crtc == intel_crtc && + plane_state->rotation != BIT(DRM_ROTATE_0)) + intel_crtc->atomic.disable_fbc = true; + + /* + * BDW signals flip done immediately if the plane + * is disabled, even if the plane enable is already + * armed to occur at the next vblank :( + */ + if (turn_on && IS_BROADWELL(dev)) + intel_crtc->atomic.wait_vblank = true; + + intel_crtc->atomic.update_fbc |= visible || mode_changed; + break; + case DRM_PLANE_TYPE_CURSOR: + break; + case DRM_PLANE_TYPE_OVERLAY: + if (turn_off && !mode_changed) { + intel_crtc->atomic.wait_vblank = true; + intel_crtc->atomic.update_sprite_watermarks |= + 1 << i; + } + } + return 0; +} + +static bool encoders_cloneable(const struct intel_encoder *a, + const struct intel_encoder *b) +{ + /* masks could be asymmetric, so check both ways */ + return a == b || (a->cloneable & (1 << b->type) && + b->cloneable & (1 << a->type)); +} + +static bool check_single_encoder_cloning(struct drm_atomic_state *state, + struct intel_crtc *crtc, + struct intel_encoder *encoder) +{ + struct intel_encoder *source_encoder; + struct drm_connector *connector; + struct drm_connector_state *connector_state; + int i; + + for_each_connector_in_state(state, connector, connector_state, i) { + if (connector_state->crtc != &crtc->base) + continue; + + source_encoder = + to_intel_encoder(connector_state->best_encoder); + if (!encoders_cloneable(encoder, source_encoder)) + return false; + } + + return true; +} + +static bool check_encoder_cloning(struct drm_atomic_state *state, + struct intel_crtc *crtc) { - struct intel_crtc *crtc; struct intel_encoder *encoder; - struct intel_connector *connector; + struct drm_connector *connector; + struct drm_connector_state *connector_state; + int i; - for_each_intel_connector(dev, connector) { - connector->new_encoder = - to_intel_encoder(connector->base.encoder); + for_each_connector_in_state(state, connector, connector_state, i) { + if (connector_state->crtc != &crtc->base) + continue; + + encoder = to_intel_encoder(connector_state->best_encoder); + if (!check_single_encoder_cloning(state, crtc, encoder)) + return false; } - for_each_intel_encoder(dev, encoder) { - encoder->new_crtc = - to_intel_crtc(encoder->base.crtc); + return true; +} + +static int intel_crtc_atomic_check(struct drm_crtc *crtc, + struct drm_crtc_state *crtc_state) +{ + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + struct intel_crtc_state *pipe_config = + to_intel_crtc_state(crtc_state); + struct drm_atomic_state *state = crtc_state->state; + int ret; + bool mode_changed = needs_modeset(crtc_state); + + if (mode_changed && !check_encoder_cloning(state, intel_crtc)) { + DRM_DEBUG_KMS("rejecting invalid cloning configuration\n"); + return -EINVAL; } - for_each_intel_crtc(dev, crtc) { - crtc->new_enabled = crtc->base.state->enable; + if (mode_changed && !crtc_state->active) + intel_crtc->atomic.update_wm_post = true; + + if (mode_changed && crtc_state->enable && + dev_priv->display.crtc_compute_clock && + !WARN_ON(pipe_config->shared_dpll != DPLL_ID_PRIVATE)) { + ret = dev_priv->display.crtc_compute_clock(intel_crtc, + pipe_config); + if (ret) + return ret; + } + + ret = 0; + if (INTEL_INFO(dev)->gen >= 9) { + if (mode_changed) + ret = skl_update_scaler_crtc(pipe_config); + + if (!ret) + ret = intel_atomic_setup_scalers(dev, intel_crtc, + pipe_config); } + + return ret; } -/* Transitional helper to copy current connector/encoder state to - * connector->state. This is needed so that code that is partially - * converted to atomic does the right thing. - */ +static const struct drm_crtc_helper_funcs intel_helper_funcs = { + .mode_set_base_atomic = intel_pipe_set_base_atomic, + .load_lut = intel_crtc_load_lut, + .atomic_begin = intel_begin_crtc_commit, + .atomic_flush = intel_finish_crtc_commit, + .atomic_check = intel_crtc_atomic_check, +}; + static void intel_modeset_update_connector_atomic_state(struct drm_device *dev) { struct intel_connector *connector; @@ -11361,39 +11807,6 @@ static void intel_modeset_update_connector_atomic_state(struct drm_device *dev) } } -/* Fixup legacy state after an atomic state swap. - */ -static void intel_modeset_fixup_state(struct drm_atomic_state *state) -{ - struct intel_crtc *crtc; - struct intel_encoder *encoder; - struct intel_connector *connector; - - for_each_intel_connector(state->dev, connector) { - connector->base.encoder = connector->base.state->best_encoder; - if (connector->base.encoder) - connector->base.encoder->crtc = - connector->base.state->crtc; - } - - /* Update crtc of disabled encoders */ - for_each_intel_encoder(state->dev, encoder) { - int num_connectors = 0; - - for_each_intel_connector(state->dev, connector) - if (connector->base.encoder == &encoder->base) - num_connectors++; - - if (num_connectors == 0) - encoder->base.crtc = NULL; - } - - for_each_intel_crtc(state->dev, crtc) { - crtc->base.enabled = crtc->base.state->enable; - crtc->config = to_intel_crtc_state(crtc->base.state); - } -} - static void connected_sink_compute_bpp(struct intel_connector *connector, struct intel_crtc_state *pipe_config) @@ -11529,17 +11942,20 @@ static void intel_dump_pipe_config(struct intel_crtc *crtc, DRM_DEBUG_KMS("double wide: %i\n", pipe_config->double_wide); if (IS_BROXTON(dev)) { - DRM_DEBUG_KMS("ddi_pll_sel: %u; dpll_hw_state: ebb0: 0x%x, " + DRM_DEBUG_KMS("ddi_pll_sel: %u; dpll_hw_state: ebb0: 0x%x, ebb4: 0x%x," "pll0: 0x%x, pll1: 0x%x, pll2: 0x%x, pll3: 0x%x, " - "pll6: 0x%x, pll8: 0x%x, pcsdw12: 0x%x\n", + "pll6: 0x%x, pll8: 0x%x, pll9: 0x%x, pll10: 0x%x, pcsdw12: 0x%x\n", pipe_config->ddi_pll_sel, pipe_config->dpll_hw_state.ebb0, + pipe_config->dpll_hw_state.ebb4, pipe_config->dpll_hw_state.pll0, pipe_config->dpll_hw_state.pll1, pipe_config->dpll_hw_state.pll2, pipe_config->dpll_hw_state.pll3, pipe_config->dpll_hw_state.pll6, pipe_config->dpll_hw_state.pll8, + pipe_config->dpll_hw_state.pll9, + pipe_config->dpll_hw_state.pll10, pipe_config->dpll_hw_state.pcsdw12); } else if (IS_SKYLAKE(dev)) { DRM_DEBUG_KMS("ddi_pll_sel: %u; dpll_hw_state: " @@ -11596,56 +12012,6 @@ static void intel_dump_pipe_config(struct intel_crtc *crtc, } } -static bool encoders_cloneable(const struct intel_encoder *a, - const struct intel_encoder *b) -{ - /* masks could be asymmetric, so check both ways */ - return a == b || (a->cloneable & (1 << b->type) && - b->cloneable & (1 << a->type)); -} - -static bool check_single_encoder_cloning(struct drm_atomic_state *state, - struct intel_crtc *crtc, - struct intel_encoder *encoder) -{ - struct intel_encoder *source_encoder; - struct drm_connector *connector; - struct drm_connector_state *connector_state; - int i; - - for_each_connector_in_state(state, connector, connector_state, i) { - if (connector_state->crtc != &crtc->base) - continue; - - source_encoder = - to_intel_encoder(connector_state->best_encoder); - if (!encoders_cloneable(encoder, source_encoder)) - return false; - } - - return true; -} - -static bool check_encoder_cloning(struct drm_atomic_state *state, - struct intel_crtc *crtc) -{ - struct intel_encoder *encoder; - struct drm_connector *connector; - struct drm_connector_state *connector_state; - int i; - - for_each_connector_in_state(state, connector, connector_state, i) { - if (connector_state->crtc != &crtc->base) - continue; - - encoder = to_intel_encoder(connector_state->best_encoder); - if (!check_single_encoder_cloning(state, crtc, encoder)) - return false; - } - - return true; -} - static bool check_digital_port_conflicts(struct drm_atomic_state *state) { struct drm_device *dev = state->dev; @@ -11699,6 +12065,7 @@ clear_intel_crtc_state(struct intel_crtc_state *crtc_state) struct intel_dpll_hw_state dpll_hw_state; enum intel_dpll_id shared_dpll; uint32_t ddi_pll_sel; + bool force_thru; /* FIXME: before the switch to atomic started, a new pipe_config was * kzalloc'd. Code that depends on any field being zero should be @@ -11710,6 +12077,7 @@ clear_intel_crtc_state(struct intel_crtc_state *crtc_state) shared_dpll = crtc_state->shared_dpll; dpll_hw_state = crtc_state->dpll_hw_state; ddi_pll_sel = crtc_state->ddi_pll_sel; + force_thru = crtc_state->pch_pfit.force_thru; memset(crtc_state, 0, sizeof *crtc_state); @@ -11718,13 +12086,14 @@ clear_intel_crtc_state(struct intel_crtc_state *crtc_state) crtc_state->shared_dpll = shared_dpll; crtc_state->dpll_hw_state = dpll_hw_state; crtc_state->ddi_pll_sel = ddi_pll_sel; + crtc_state->pch_pfit.force_thru = force_thru; } static int intel_modeset_pipe_config(struct drm_crtc *crtc, - struct drm_atomic_state *state, struct intel_crtc_state *pipe_config) { + struct drm_atomic_state *state = pipe_config->base.state; struct intel_encoder *encoder; struct drm_connector *connector; struct drm_connector_state *connector_state; @@ -11732,16 +12101,6 @@ intel_modeset_pipe_config(struct drm_crtc *crtc, int i; bool retry = true; - if (!check_encoder_cloning(state, to_intel_crtc(crtc))) { - DRM_DEBUG_KMS("rejecting invalid cloning configuration\n"); - return -EINVAL; - } - - if (!check_digital_port_conflicts(state)) { - DRM_DEBUG_KMS("rejecting conflicting digital port configuration\n"); - return -EINVAL; - } - clear_intel_crtc_state(pipe_config); pipe_config->cpu_transcoder = @@ -11829,94 +12188,33 @@ encoder_retry: goto encoder_retry; } - pipe_config->dither = pipe_config->pipe_bpp != base_bpp; + /* Dithering seems to not pass-through bits correctly when it should, so + * only enable it on 6bpc panels. */ + pipe_config->dither = pipe_config->pipe_bpp == 6*3; DRM_DEBUG_KMS("plane bpp: %i, pipe bpp: %i, dithering: %i\n", base_bpp, pipe_config->pipe_bpp, pipe_config->dither); - return 0; fail: return ret; } -static bool intel_crtc_in_use(struct drm_crtc *crtc) -{ - struct drm_encoder *encoder; - struct drm_device *dev = crtc->dev; - - list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) - if (encoder->crtc == crtc) - return true; - - return false; -} - -static bool -needs_modeset(struct drm_crtc_state *state) -{ - return state->mode_changed || state->active_changed; -} - static void -intel_modeset_update_state(struct drm_atomic_state *state) +intel_modeset_update_crtc_state(struct drm_atomic_state *state) { - struct drm_device *dev = state->dev; - struct drm_i915_private *dev_priv = dev->dev_private; - struct intel_encoder *intel_encoder; struct drm_crtc *crtc; struct drm_crtc_state *crtc_state; - struct drm_connector *connector; int i; - intel_shared_dpll_commit(dev_priv); - - for_each_intel_encoder(dev, intel_encoder) { - if (!intel_encoder->base.crtc) - continue; - - for_each_crtc_in_state(state, crtc, crtc_state, i) { - if (crtc != intel_encoder->base.crtc) - continue; - - if (crtc_state->enable && needs_modeset(crtc_state)) - intel_encoder->connectors_active = false; - - break; - } - } - - drm_atomic_helper_swap_state(state->dev, state); - intel_modeset_fixup_state(state); - /* Double check state. */ - for_each_crtc(dev, crtc) { - WARN_ON(crtc->state->enable != intel_crtc_in_use(crtc)); - } - - list_for_each_entry(connector, &dev->mode_config.connector_list, head) { - if (!connector->encoder || !connector->encoder->crtc) - continue; - - for_each_crtc_in_state(state, crtc, crtc_state, i) { - if (crtc != connector->encoder->crtc) - continue; - - if (crtc->state->enable && needs_modeset(crtc->state)) { - struct drm_property *dpms_property = - dev->mode_config.dpms_property; - - connector->dpms = DRM_MODE_DPMS_ON; - drm_object_property_set_value(&connector->base, - dpms_property, - DRM_MODE_DPMS_ON); - - intel_encoder = to_intel_encoder(connector->encoder); - intel_encoder->connectors_active = true; - } + for_each_crtc_in_state(state, crtc, crtc_state, i) { + to_intel_crtc(crtc)->config = to_intel_crtc_state(crtc->state); - break; - } + /* Update hwmode for vblank functions */ + if (crtc->state->active) + crtc->hwmode = crtc->state->adjusted_mode; + else + crtc->hwmode.crtc_clock = 0; } - } static bool intel_fuzzy_clock_check(int clock1, int clock2) @@ -11943,27 +12241,133 @@ static bool intel_fuzzy_clock_check(int clock1, int clock2) base.head) \ if (mask & (1 <<(intel_crtc)->pipe)) + +static bool +intel_compare_m_n(unsigned int m, unsigned int n, + unsigned int m2, unsigned int n2, + bool exact) +{ + if (m == m2 && n == n2) + return true; + + if (exact || !m || !n || !m2 || !n2) + return false; + + BUILD_BUG_ON(DATA_LINK_M_N_MASK > INT_MAX); + + if (m > m2) { + while (m > m2) { + m2 <<= 1; + n2 <<= 1; + } + } else if (m < m2) { + while (m < m2) { + m <<= 1; + n <<= 1; + } + } + + return m == m2 && n == n2; +} + +static bool +intel_compare_link_m_n(const struct intel_link_m_n *m_n, + struct intel_link_m_n *m2_n2, + bool adjust) +{ + if (m_n->tu == m2_n2->tu && + intel_compare_m_n(m_n->gmch_m, m_n->gmch_n, + m2_n2->gmch_m, m2_n2->gmch_n, !adjust) && + intel_compare_m_n(m_n->link_m, m_n->link_n, + m2_n2->link_m, m2_n2->link_n, !adjust)) { + if (adjust) + *m2_n2 = *m_n; + + return true; + } + + return false; +} + static bool intel_pipe_config_compare(struct drm_device *dev, struct intel_crtc_state *current_config, - struct intel_crtc_state *pipe_config) + struct intel_crtc_state *pipe_config, + bool adjust) { + bool ret = true; + +#define INTEL_ERR_OR_DBG_KMS(fmt, ...) \ + do { \ + if (!adjust) \ + DRM_ERROR(fmt, ##__VA_ARGS__); \ + else \ + DRM_DEBUG_KMS(fmt, ##__VA_ARGS__); \ + } while (0) + #define PIPE_CONF_CHECK_X(name) \ if (current_config->name != pipe_config->name) { \ - DRM_ERROR("mismatch in " #name " " \ + INTEL_ERR_OR_DBG_KMS("mismatch in " #name " " \ "(expected 0x%08x, found 0x%08x)\n", \ current_config->name, \ pipe_config->name); \ - return false; \ + ret = false; \ } #define PIPE_CONF_CHECK_I(name) \ if (current_config->name != pipe_config->name) { \ - DRM_ERROR("mismatch in " #name " " \ + INTEL_ERR_OR_DBG_KMS("mismatch in " #name " " \ "(expected %i, found %i)\n", \ current_config->name, \ pipe_config->name); \ - return false; \ + ret = false; \ + } + +#define PIPE_CONF_CHECK_M_N(name) \ + if (!intel_compare_link_m_n(¤t_config->name, \ + &pipe_config->name,\ + adjust)) { \ + INTEL_ERR_OR_DBG_KMS("mismatch in " #name " " \ + "(expected tu %i gmch %i/%i link %i/%i, " \ + "found tu %i, gmch %i/%i link %i/%i)\n", \ + current_config->name.tu, \ + current_config->name.gmch_m, \ + current_config->name.gmch_n, \ + current_config->name.link_m, \ + current_config->name.link_n, \ + pipe_config->name.tu, \ + pipe_config->name.gmch_m, \ + pipe_config->name.gmch_n, \ + pipe_config->name.link_m, \ + pipe_config->name.link_n); \ + ret = false; \ + } + +#define PIPE_CONF_CHECK_M_N_ALT(name, alt_name) \ + if (!intel_compare_link_m_n(¤t_config->name, \ + &pipe_config->name, adjust) && \ + !intel_compare_link_m_n(¤t_config->alt_name, \ + &pipe_config->name, adjust)) { \ + INTEL_ERR_OR_DBG_KMS("mismatch in " #name " " \ + "(expected tu %i gmch %i/%i link %i/%i, " \ + "or tu %i gmch %i/%i link %i/%i, " \ + "found tu %i, gmch %i/%i link %i/%i)\n", \ + current_config->name.tu, \ + current_config->name.gmch_m, \ + current_config->name.gmch_n, \ + current_config->name.link_m, \ + current_config->name.link_n, \ + current_config->alt_name.tu, \ + current_config->alt_name.gmch_m, \ + current_config->alt_name.gmch_n, \ + current_config->alt_name.link_m, \ + current_config->alt_name.link_n, \ + pipe_config->name.tu, \ + pipe_config->name.gmch_m, \ + pipe_config->name.gmch_n, \ + pipe_config->name.link_m, \ + pipe_config->name.link_n); \ + ret = false; \ } /* This is required for BDW+ where there is only one set of registers for @@ -11974,30 +12378,30 @@ intel_pipe_config_compare(struct drm_device *dev, #define PIPE_CONF_CHECK_I_ALT(name, alt_name) \ if ((current_config->name != pipe_config->name) && \ (current_config->alt_name != pipe_config->name)) { \ - DRM_ERROR("mismatch in " #name " " \ + INTEL_ERR_OR_DBG_KMS("mismatch in " #name " " \ "(expected %i or %i, found %i)\n", \ current_config->name, \ current_config->alt_name, \ pipe_config->name); \ - return false; \ + ret = false; \ } #define PIPE_CONF_CHECK_FLAGS(name, mask) \ if ((current_config->name ^ pipe_config->name) & (mask)) { \ - DRM_ERROR("mismatch in " #name "(" #mask ") " \ + INTEL_ERR_OR_DBG_KMS("mismatch in " #name "(" #mask ") " \ "(expected %i, found %i)\n", \ current_config->name & (mask), \ pipe_config->name & (mask)); \ - return false; \ + ret = false; \ } #define PIPE_CONF_CHECK_CLOCK_FUZZY(name) \ if (!intel_fuzzy_clock_check(current_config->name, pipe_config->name)) { \ - DRM_ERROR("mismatch in " #name " " \ + INTEL_ERR_OR_DBG_KMS("mismatch in " #name " " \ "(expected %i, found %i)\n", \ current_config->name, \ pipe_config->name); \ - return false; \ + ret = false; \ } #define PIPE_CONF_QUIRK(quirk) \ @@ -12007,35 +12411,18 @@ intel_pipe_config_compare(struct drm_device *dev, PIPE_CONF_CHECK_I(has_pch_encoder); PIPE_CONF_CHECK_I(fdi_lanes); - PIPE_CONF_CHECK_I(fdi_m_n.gmch_m); - PIPE_CONF_CHECK_I(fdi_m_n.gmch_n); - PIPE_CONF_CHECK_I(fdi_m_n.link_m); - PIPE_CONF_CHECK_I(fdi_m_n.link_n); - PIPE_CONF_CHECK_I(fdi_m_n.tu); + PIPE_CONF_CHECK_M_N(fdi_m_n); PIPE_CONF_CHECK_I(has_dp_encoder); if (INTEL_INFO(dev)->gen < 8) { - PIPE_CONF_CHECK_I(dp_m_n.gmch_m); - PIPE_CONF_CHECK_I(dp_m_n.gmch_n); - PIPE_CONF_CHECK_I(dp_m_n.link_m); - PIPE_CONF_CHECK_I(dp_m_n.link_n); - PIPE_CONF_CHECK_I(dp_m_n.tu); - - if (current_config->has_drrs) { - PIPE_CONF_CHECK_I(dp_m2_n2.gmch_m); - PIPE_CONF_CHECK_I(dp_m2_n2.gmch_n); - PIPE_CONF_CHECK_I(dp_m2_n2.link_m); - PIPE_CONF_CHECK_I(dp_m2_n2.link_n); - PIPE_CONF_CHECK_I(dp_m2_n2.tu); - } - } else { - PIPE_CONF_CHECK_I_ALT(dp_m_n.gmch_m, dp_m2_n2.gmch_m); - PIPE_CONF_CHECK_I_ALT(dp_m_n.gmch_n, dp_m2_n2.gmch_n); - PIPE_CONF_CHECK_I_ALT(dp_m_n.link_m, dp_m2_n2.link_m); - PIPE_CONF_CHECK_I_ALT(dp_m_n.link_n, dp_m2_n2.link_n); - PIPE_CONF_CHECK_I_ALT(dp_m_n.tu, dp_m2_n2.tu); - } + PIPE_CONF_CHECK_M_N(dp_m_n); + + PIPE_CONF_CHECK_I(has_drrs); + if (current_config->has_drrs) + PIPE_CONF_CHECK_M_N(dp_m2_n2); + } else + PIPE_CONF_CHECK_M_N_ALT(dp_m_n, dp_m2_n2); PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_hdisplay); PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_htotal); @@ -12077,21 +12464,11 @@ intel_pipe_config_compare(struct drm_device *dev, PIPE_CONF_CHECK_I(pipe_src_w); PIPE_CONF_CHECK_I(pipe_src_h); - /* - * FIXME: BIOS likes to set up a cloned config with lvds+external - * screen. Since we don't yet re-compute the pipe config when moving - * just the lvds port away to another pipe the sw tracking won't match. - * - * Proper atomic modesets with recomputed global state will fix this. - * Until then just don't check gmch state for inherited modes. - */ - if (!PIPE_CONF_QUIRK(PIPE_CONFIG_QUIRK_INHERITED_MODE)) { - PIPE_CONF_CHECK_I(gmch_pfit.control); - /* pfit ratios are autocomputed by the hw on gen4+ */ - if (INTEL_INFO(dev)->gen < 4) - PIPE_CONF_CHECK_I(gmch_pfit.pgm_ratios); - PIPE_CONF_CHECK_I(gmch_pfit.lvds_border_bits); - } + PIPE_CONF_CHECK_I(gmch_pfit.control); + /* pfit ratios are autocomputed by the hw on gen4+ */ + if (INTEL_INFO(dev)->gen < 4) + PIPE_CONF_CHECK_I(gmch_pfit.pgm_ratios); + PIPE_CONF_CHECK_I(gmch_pfit.lvds_border_bits); PIPE_CONF_CHECK_I(pch_pfit.enabled); if (current_config->pch_pfit.enabled) { @@ -12131,8 +12508,9 @@ intel_pipe_config_compare(struct drm_device *dev, #undef PIPE_CONF_CHECK_FLAGS #undef PIPE_CONF_CHECK_CLOCK_FUZZY #undef PIPE_CONF_QUIRK +#undef INTEL_ERR_OR_DBG_KMS - return true; + return ret; } static void check_wm_state(struct drm_device *dev) @@ -12186,17 +12564,23 @@ static void check_wm_state(struct drm_device *dev) } static void -check_connector_state(struct drm_device *dev) +check_connector_state(struct drm_device *dev, + struct drm_atomic_state *old_state) { - struct intel_connector *connector; + struct drm_connector_state *old_conn_state; + struct drm_connector *connector; + int i; + + for_each_connector_in_state(old_state, connector, old_conn_state, i) { + struct drm_encoder *encoder = connector->encoder; + struct drm_connector_state *state = connector->state; - for_each_intel_connector(dev, connector) { /* This also checks the encoder/connector hw state with the * ->get_hw_state callbacks. */ - intel_connector_check_state(connector); + intel_connector_check_state(to_intel_connector(connector)); - I915_STATE_WARN(&connector->new_encoder->base != connector->base.encoder, - "connector's staged encoder doesn't match current encoder\n"); + I915_STATE_WARN(state->best_encoder != encoder, + "connector's atomic encoder doesn't match legacy encoder\n"); } } @@ -12208,124 +12592,106 @@ check_encoder_state(struct drm_device *dev) for_each_intel_encoder(dev, encoder) { bool enabled = false; - bool active = false; - enum pipe pipe, tracked_pipe; + enum pipe pipe; DRM_DEBUG_KMS("[ENCODER:%d:%s]\n", encoder->base.base.id, encoder->base.name); - I915_STATE_WARN(&encoder->new_crtc->base != encoder->base.crtc, - "encoder's stage crtc doesn't match current crtc\n"); - I915_STATE_WARN(encoder->connectors_active && !encoder->base.crtc, - "encoder's active_connectors set, but no crtc\n"); - for_each_intel_connector(dev, connector) { - if (connector->base.encoder != &encoder->base) + if (connector->base.state->best_encoder != &encoder->base) continue; enabled = true; - if (connector->base.dpms != DRM_MODE_DPMS_OFF) - active = true; + + I915_STATE_WARN(connector->base.state->crtc != + encoder->base.crtc, + "connector's crtc doesn't match encoder crtc\n"); } - /* - * for MST connectors if we unplug the connector is gone - * away but the encoder is still connected to a crtc - * until a modeset happens in response to the hotplug. - */ - if (!enabled && encoder->base.encoder_type == DRM_MODE_ENCODER_DPMST) - continue; I915_STATE_WARN(!!encoder->base.crtc != enabled, "encoder's enabled state mismatch " "(expected %i, found %i)\n", !!encoder->base.crtc, enabled); - I915_STATE_WARN(active && !encoder->base.crtc, - "active encoder with no crtc\n"); - - I915_STATE_WARN(encoder->connectors_active != active, - "encoder's computed active state doesn't match tracked active state " - "(expected %i, found %i)\n", active, encoder->connectors_active); - - active = encoder->get_hw_state(encoder, &pipe); - I915_STATE_WARN(active != encoder->connectors_active, - "encoder's hw state doesn't match sw tracking " - "(expected %i, found %i)\n", - encoder->connectors_active, active); - if (!encoder->base.crtc) - continue; - - tracked_pipe = to_intel_crtc(encoder->base.crtc)->pipe; - I915_STATE_WARN(active && pipe != tracked_pipe, - "active encoder's pipe doesn't match" - "(expected %i, found %i)\n", - tracked_pipe, pipe); + if (!encoder->base.crtc) { + bool active; + active = encoder->get_hw_state(encoder, &pipe); + I915_STATE_WARN(active, + "encoder detached but still enabled on pipe %c.\n", + pipe_name(pipe)); + } } } static void -check_crtc_state(struct drm_device *dev) +check_crtc_state(struct drm_device *dev, struct drm_atomic_state *old_state) { struct drm_i915_private *dev_priv = dev->dev_private; - struct intel_crtc *crtc; struct intel_encoder *encoder; - struct intel_crtc_state pipe_config; + struct drm_crtc_state *old_crtc_state; + struct drm_crtc *crtc; + int i; - for_each_intel_crtc(dev, crtc) { - bool enabled = false; - bool active = false; + for_each_crtc_in_state(old_state, crtc, old_crtc_state, i) { + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + struct intel_crtc_state *pipe_config, *sw_config; + bool active; - memset(&pipe_config, 0, sizeof(pipe_config)); + if (!needs_modeset(crtc->state)) + continue; - DRM_DEBUG_KMS("[CRTC:%d]\n", - crtc->base.base.id); + __drm_atomic_helper_crtc_destroy_state(crtc, old_crtc_state); + pipe_config = to_intel_crtc_state(old_crtc_state); + memset(pipe_config, 0, sizeof(*pipe_config)); + pipe_config->base.crtc = crtc; + pipe_config->base.state = old_state; - I915_STATE_WARN(crtc->active && !crtc->base.state->enable, - "active crtc, but not enabled in sw tracking\n"); + DRM_DEBUG_KMS("[CRTC:%d]\n", + crtc->base.id); - for_each_intel_encoder(dev, encoder) { - if (encoder->base.crtc != &crtc->base) - continue; - enabled = true; - if (encoder->connectors_active) - active = true; - } + active = dev_priv->display.get_pipe_config(intel_crtc, + pipe_config); - I915_STATE_WARN(active != crtc->active, - "crtc's computed active state doesn't match tracked active state " - "(expected %i, found %i)\n", active, crtc->active); - I915_STATE_WARN(enabled != crtc->base.state->enable, - "crtc's computed enabled state doesn't match tracked enabled state " - "(expected %i, found %i)\n", enabled, - crtc->base.state->enable); + /* hw state is inconsistent with the pipe quirk */ + if ((intel_crtc->pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) || + (intel_crtc->pipe == PIPE_B && dev_priv->quirks & QUIRK_PIPEB_FORCE)) + active = crtc->state->active; - active = dev_priv->display.get_pipe_config(crtc, - &pipe_config); + I915_STATE_WARN(crtc->state->active != active, + "crtc active state doesn't match with hw state " + "(expected %i, found %i)\n", crtc->state->active, active); - /* hw state is inconsistent with the pipe quirk */ - if ((crtc->pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) || - (crtc->pipe == PIPE_B && dev_priv->quirks & QUIRK_PIPEB_FORCE)) - active = crtc->active; + I915_STATE_WARN(intel_crtc->active != crtc->state->active, + "transitional active state does not match atomic hw state " + "(expected %i, found %i)\n", crtc->state->active, intel_crtc->active); - for_each_intel_encoder(dev, encoder) { + for_each_encoder_on_crtc(dev, crtc, encoder) { enum pipe pipe; - if (encoder->base.crtc != &crtc->base) - continue; - if (encoder->get_hw_state(encoder, &pipe)) - encoder->get_config(encoder, &pipe_config); + + active = encoder->get_hw_state(encoder, &pipe); + I915_STATE_WARN(active != crtc->state->active, + "[ENCODER:%i] active %i with crtc active %i\n", + encoder->base.base.id, active, crtc->state->active); + + I915_STATE_WARN(active && intel_crtc->pipe != pipe, + "Encoder connected to wrong pipe %c\n", + pipe_name(pipe)); + + if (active) + encoder->get_config(encoder, pipe_config); } - I915_STATE_WARN(crtc->active != active, - "crtc active state doesn't match with hw state " - "(expected %i, found %i)\n", crtc->active, active); + if (!crtc->state->active) + continue; - if (active && - !intel_pipe_config_compare(dev, crtc->config, &pipe_config)) { + sw_config = to_intel_crtc_state(crtc->state); + if (!intel_pipe_config_compare(dev, sw_config, + pipe_config, false)) { I915_STATE_WARN(1, "pipe state doesn't match!\n"); - intel_dump_pipe_config(crtc, &pipe_config, + intel_dump_pipe_config(intel_crtc, pipe_config, "[hw state]"); - intel_dump_pipe_config(crtc, crtc->config, + intel_dump_pipe_config(intel_crtc, sw_config, "[sw state]"); } } @@ -12380,13 +12746,14 @@ check_shared_dpll_state(struct drm_device *dev) } } -void -intel_modeset_check_state(struct drm_device *dev) +static void +intel_modeset_check_state(struct drm_device *dev, + struct drm_atomic_state *old_state) { check_wm_state(dev); - check_connector_state(dev); + check_connector_state(dev, old_state); check_encoder_state(dev); - check_crtc_state(dev); + check_crtc_state(dev, old_state); check_shared_dpll_state(dev); } @@ -12440,557 +12807,390 @@ static void update_scanline_offset(struct intel_crtc *crtc) crtc->scanline_offset = 1; } -static struct intel_crtc_state * -intel_modeset_compute_config(struct drm_crtc *crtc, - struct drm_atomic_state *state) -{ - struct intel_crtc_state *pipe_config; - int ret = 0; - - ret = drm_atomic_add_affected_connectors(state, crtc); - if (ret) - return ERR_PTR(ret); - - ret = drm_atomic_helper_check_modeset(state->dev, state); - if (ret) - return ERR_PTR(ret); - - /* - * Note this needs changes when we start tracking multiple modes - * and crtcs. At that point we'll need to compute the whole config - * (i.e. one pipe_config for each crtc) rather than just the one - * for this crtc. - */ - pipe_config = intel_atomic_get_crtc_state(state, to_intel_crtc(crtc)); - if (IS_ERR(pipe_config)) - return pipe_config; - - if (!pipe_config->base.enable) - return pipe_config; - - ret = intel_modeset_pipe_config(crtc, state, pipe_config); - if (ret) - return ERR_PTR(ret); - - /* Check things that can only be changed through modeset */ - if (pipe_config->has_audio != - to_intel_crtc(crtc)->config->has_audio) - pipe_config->base.mode_changed = true; - - /* - * Note we have an issue here with infoframes: current code - * only updates them on the full mode set path per hw - * requirements. So here we should be checking for any - * required changes and forcing a mode set. - */ - - intel_dump_pipe_config(to_intel_crtc(crtc), pipe_config,"[modeset]"); - - ret = drm_atomic_helper_check_planes(state->dev, state); - if (ret) - return ERR_PTR(ret); - - return pipe_config; -} - -static int __intel_set_mode_setup_plls(struct drm_atomic_state *state) +static void intel_modeset_clear_plls(struct drm_atomic_state *state) { struct drm_device *dev = state->dev; struct drm_i915_private *dev_priv = to_i915(dev); - unsigned clear_pipes = 0; + struct intel_shared_dpll_config *shared_dpll = NULL; struct intel_crtc *intel_crtc; struct intel_crtc_state *intel_crtc_state; struct drm_crtc *crtc; struct drm_crtc_state *crtc_state; - int ret = 0; int i; if (!dev_priv->display.crtc_compute_clock) - return 0; - - for_each_crtc_in_state(state, crtc, crtc_state, i) { - intel_crtc = to_intel_crtc(crtc); - intel_crtc_state = to_intel_crtc_state(crtc_state); - - if (needs_modeset(crtc_state)) { - clear_pipes |= 1 << intel_crtc->pipe; - intel_crtc_state->shared_dpll = DPLL_ID_PRIVATE; - } - } - - ret = intel_shared_dpll_start_config(dev_priv, clear_pipes); - if (ret) - goto done; + return; for_each_crtc_in_state(state, crtc, crtc_state, i) { - if (!needs_modeset(crtc_state) || !crtc_state->enable) - continue; + int dpll; intel_crtc = to_intel_crtc(crtc); intel_crtc_state = to_intel_crtc_state(crtc_state); + dpll = intel_crtc_state->shared_dpll; - ret = dev_priv->display.crtc_compute_clock(intel_crtc, - intel_crtc_state); - if (ret) { - intel_shared_dpll_abort_config(dev_priv); - goto done; - } - } + if (!needs_modeset(crtc_state) || dpll == DPLL_ID_PRIVATE) + continue; -done: - return ret; -} + intel_crtc_state->shared_dpll = DPLL_ID_PRIVATE; -/* Code that should eventually be part of atomic_check() */ -static int __intel_set_mode_checks(struct drm_atomic_state *state) -{ - struct drm_device *dev = state->dev; - int ret; + if (!shared_dpll) + shared_dpll = intel_atomic_get_shared_dpll_state(state); - /* - * See if the config requires any additional preparation, e.g. - * to adjust global state with pipes off. We need to do this - * here so we can get the modeset_pipe updated config for the new - * mode set on this crtc. For other crtcs we need to use the - * adjusted_mode bits in the crtc directly. - */ - if (IS_VALLEYVIEW(dev) || IS_BROXTON(dev)) { - ret = valleyview_modeset_global_pipes(state); - if (ret) - return ret; + shared_dpll[dpll].crtc_mask &= ~(1 << intel_crtc->pipe); } - - ret = __intel_set_mode_setup_plls(state); - if (ret) - return ret; - - return 0; } -static int __intel_set_mode(struct drm_crtc *modeset_crtc, - struct intel_crtc_state *pipe_config) +/* + * This implements the workaround described in the "notes" section of the mode + * set sequence documentation. When going from no pipes or single pipe to + * multiple pipes, and planes are enabled after the pipe, we need to wait at + * least 2 vblanks on the first pipe before enabling planes on the second pipe. + */ +static int haswell_mode_set_planes_workaround(struct drm_atomic_state *state) { - struct drm_device *dev = modeset_crtc->dev; - struct drm_i915_private *dev_priv = dev->dev_private; - struct drm_atomic_state *state = pipe_config->base.state; - struct drm_crtc *crtc; struct drm_crtc_state *crtc_state; - int ret = 0; + struct intel_crtc *intel_crtc; + struct drm_crtc *crtc; + struct intel_crtc_state *first_crtc_state = NULL; + struct intel_crtc_state *other_crtc_state = NULL; + enum pipe first_pipe = INVALID_PIPE, enabled_pipe = INVALID_PIPE; int i; - ret = __intel_set_mode_checks(state); - if (ret < 0) - return ret; - - ret = drm_atomic_helper_prepare_planes(dev, state); - if (ret) - return ret; - + /* look at all crtc's that are going to be enabled in during modeset */ for_each_crtc_in_state(state, crtc, crtc_state, i) { - if (!needs_modeset(crtc_state)) + intel_crtc = to_intel_crtc(crtc); + + if (!crtc_state->active || !needs_modeset(crtc_state)) continue; - if (!crtc_state->enable) { - intel_crtc_disable(crtc); - } else if (crtc->state->enable) { - intel_crtc_disable_planes(crtc); - dev_priv->display.crtc_disable(crtc); + if (first_crtc_state) { + other_crtc_state = to_intel_crtc_state(crtc_state); + break; + } else { + first_crtc_state = to_intel_crtc_state(crtc_state); + first_pipe = intel_crtc->pipe; } } - /* crtc->mode is already used by the ->mode_set callbacks, hence we need - * to set it here already despite that we pass it down the callchain. - * - * Note we'll need to fix this up when we start tracking multiple - * pipes; here we assume a single modeset_pipe and only track the - * single crtc and mode. - */ - if (pipe_config->base.enable && needs_modeset(&pipe_config->base)) { - modeset_crtc->mode = pipe_config->base.mode; - - /* - * Calculate and store various constants which - * are later needed by vblank and swap-completion - * timestamping. They are derived from true hwmode. - */ - drm_calc_timestamping_constants(modeset_crtc, - &pipe_config->base.adjusted_mode); - } - - /* Only after disabling all output pipelines that will be changed can we - * update the the output configuration. */ - intel_modeset_update_state(state); + /* No workaround needed? */ + if (!first_crtc_state) + return 0; - /* The state has been swaped above, so state actually contains the - * old state now. */ + /* w/a possibly needed, check how many crtc's are already enabled. */ + for_each_intel_crtc(state->dev, intel_crtc) { + struct intel_crtc_state *pipe_config; - modeset_update_crtc_power_domains(state); + pipe_config = intel_atomic_get_crtc_state(state, intel_crtc); + if (IS_ERR(pipe_config)) + return PTR_ERR(pipe_config); - drm_atomic_helper_commit_planes(dev, state); + pipe_config->hsw_workaround_pipe = INVALID_PIPE; - /* Now enable the clocks, plane, pipe, and connectors that we set up. */ - for_each_crtc_in_state(state, crtc, crtc_state, i) { - if (!needs_modeset(crtc->state) || !crtc->state->enable) + if (!pipe_config->base.active || + needs_modeset(&pipe_config->base)) continue; - update_scanline_offset(to_intel_crtc(crtc)); + /* 2 or more enabled crtcs means no need for w/a */ + if (enabled_pipe != INVALID_PIPE) + return 0; - dev_priv->display.crtc_enable(crtc); - intel_crtc_enable_planes(crtc); + enabled_pipe = intel_crtc->pipe; } - /* FIXME: add subpixel order */ - - drm_atomic_helper_cleanup_planes(dev, state); - - drm_atomic_state_free(state); + if (enabled_pipe != INVALID_PIPE) + first_crtc_state->hsw_workaround_pipe = enabled_pipe; + else if (other_crtc_state) + other_crtc_state->hsw_workaround_pipe = first_pipe; return 0; } -static int intel_set_mode_with_config(struct drm_crtc *crtc, - struct intel_crtc_state *pipe_config, - bool force_restore) +static int intel_modeset_all_pipes(struct drm_atomic_state *state) { - int ret; + struct drm_crtc *crtc; + struct drm_crtc_state *crtc_state; + int ret = 0; - ret = __intel_set_mode(crtc, pipe_config); + /* add all active pipes to the state */ + for_each_crtc(state->dev, crtc) { + crtc_state = drm_atomic_get_crtc_state(state, crtc); + if (IS_ERR(crtc_state)) + return PTR_ERR(crtc_state); - if (ret == 0 && force_restore) { - intel_modeset_update_staged_output_state(crtc->dev); - intel_modeset_check_state(crtc->dev); - } + if (!crtc_state->active || needs_modeset(crtc_state)) + continue; - return ret; -} + crtc_state->mode_changed = true; -static int intel_set_mode(struct drm_crtc *crtc, - struct drm_atomic_state *state, - bool force_restore) -{ - struct intel_crtc_state *pipe_config; - int ret = 0; + ret = drm_atomic_add_affected_connectors(state, crtc); + if (ret) + break; - pipe_config = intel_modeset_compute_config(crtc, state); - if (IS_ERR(pipe_config)) { - ret = PTR_ERR(pipe_config); - goto out; + ret = drm_atomic_add_affected_planes(state, crtc); + if (ret) + break; } - ret = intel_set_mode_with_config(crtc, pipe_config, force_restore); - if (ret) - goto out; - -out: return ret; } -void intel_crtc_restore_mode(struct drm_crtc *crtc) + +static int intel_modeset_checks(struct drm_atomic_state *state) { - struct drm_device *dev = crtc->dev; - struct drm_atomic_state *state; - struct intel_encoder *encoder; - struct intel_connector *connector; - struct drm_connector_state *connector_state; - struct intel_crtc_state *crtc_state; + struct drm_device *dev = state->dev; + struct drm_i915_private *dev_priv = dev->dev_private; int ret; - state = drm_atomic_state_alloc(dev); - if (!state) { - DRM_DEBUG_KMS("[CRTC:%d] mode restore failed, out of memory", - crtc->base.id); - return; - } - - state->acquire_ctx = dev->mode_config.acquire_ctx; - - /* The force restore path in the HW readout code relies on the staged - * config still keeping the user requested config while the actual - * state has been overwritten by the configuration read from HW. We - * need to copy the staged config to the atomic state, otherwise the - * mode set will just reapply the state the HW is already in. */ - for_each_intel_encoder(dev, encoder) { - if (&encoder->new_crtc->base != crtc) - continue; - - for_each_intel_connector(dev, connector) { - if (connector->new_encoder != encoder) - continue; - - connector_state = drm_atomic_get_connector_state(state, &connector->base); - if (IS_ERR(connector_state)) { - DRM_DEBUG_KMS("Failed to add [CONNECTOR:%d:%s] to state: %ld\n", - connector->base.base.id, - connector->base.name, - PTR_ERR(connector_state)); - continue; - } - - connector_state->crtc = crtc; - connector_state->best_encoder = &encoder->base; - } - } - - crtc_state = intel_atomic_get_crtc_state(state, to_intel_crtc(crtc)); - if (IS_ERR(crtc_state)) { - DRM_DEBUG_KMS("Failed to add [CRTC:%d] to state: %ld\n", - crtc->base.id, PTR_ERR(crtc_state)); - drm_atomic_state_free(state); - return; + if (!check_digital_port_conflicts(state)) { + DRM_DEBUG_KMS("rejecting conflicting digital port configuration\n"); + return -EINVAL; } - crtc_state->base.active = crtc_state->base.enable = - to_intel_crtc(crtc)->new_enabled; - - drm_mode_copy(&crtc_state->base.mode, &crtc->mode); + /* + * See if the config requires any additional preparation, e.g. + * to adjust global state with pipes off. We need to do this + * here so we can get the modeset_pipe updated config for the new + * mode set on this crtc. For other crtcs we need to use the + * adjusted_mode bits in the crtc directly. + */ + if (dev_priv->display.modeset_calc_cdclk) { + unsigned int cdclk; - intel_modeset_setup_plane_state(state, crtc, &crtc->mode, - crtc->primary->fb, crtc->x, crtc->y); + ret = dev_priv->display.modeset_calc_cdclk(state); - ret = intel_set_mode(crtc, state, false); - if (ret) - drm_atomic_state_free(state); -} + cdclk = to_intel_atomic_state(state)->cdclk; + if (!ret && cdclk != dev_priv->cdclk_freq) + ret = intel_modeset_all_pipes(state); -#undef for_each_intel_crtc_masked + if (ret < 0) + return ret; + } else + to_intel_atomic_state(state)->cdclk = dev_priv->cdclk_freq; -static bool intel_connector_in_mode_set(struct intel_connector *connector, - struct drm_mode_set *set) -{ - int ro; + intel_modeset_clear_plls(state); - for (ro = 0; ro < set->num_connectors; ro++) - if (set->connectors[ro] == &connector->base) - return true; + if (IS_HASWELL(dev)) + return haswell_mode_set_planes_workaround(state); - return false; + return 0; } -static int -intel_modeset_stage_output_state(struct drm_device *dev, - struct drm_mode_set *set, - struct drm_atomic_state *state) +/** + * intel_atomic_check - validate state object + * @dev: drm device + * @state: state to validate + */ +static int intel_atomic_check(struct drm_device *dev, + struct drm_atomic_state *state) { - struct intel_connector *connector; - struct drm_connector *drm_connector; - struct drm_connector_state *connector_state; struct drm_crtc *crtc; struct drm_crtc_state *crtc_state; - int i, ret; - - /* The upper layers ensure that we either disable a crtc or have a list - * of connectors. For paranoia, double-check this. */ - WARN_ON(!set->fb && (set->num_connectors != 0)); - WARN_ON(set->fb && (set->num_connectors == 0)); + int ret, i; + bool any_ms = false; - for_each_intel_connector(dev, connector) { - bool in_mode_set = intel_connector_in_mode_set(connector, set); + ret = drm_atomic_helper_check_modeset(dev, state); + if (ret) + return ret; - if (!in_mode_set && connector->base.state->crtc != set->crtc) - continue; + for_each_crtc_in_state(state, crtc, crtc_state, i) { + struct intel_crtc_state *pipe_config = + to_intel_crtc_state(crtc_state); - connector_state = - drm_atomic_get_connector_state(state, &connector->base); - if (IS_ERR(connector_state)) - return PTR_ERR(connector_state); + /* Catch I915_MODE_FLAG_INHERITED */ + if (crtc_state->mode.private_flags != crtc->state->mode.private_flags) + crtc_state->mode_changed = true; - if (in_mode_set) { - int pipe = to_intel_crtc(set->crtc)->pipe; - connector_state->best_encoder = - &intel_find_encoder(connector, pipe)->base; + if (!crtc_state->enable) { + if (needs_modeset(crtc_state)) + any_ms = true; + continue; } - if (connector->base.state->crtc != set->crtc) + if (!needs_modeset(crtc_state)) continue; - /* If we disable the crtc, disable all its connectors. Also, if - * the connector is on the changing crtc but not on the new - * connector list, disable it. */ - if (!set->fb || !in_mode_set) { - connector_state->best_encoder = NULL; + /* FIXME: For only active_changed we shouldn't need to do any + * state recomputation at all. */ - DRM_DEBUG_KMS("[CONNECTOR:%d:%s] to [NOCRTC]\n", - connector->base.base.id, - connector->base.name); - } - } - /* connector->new_encoder is now updated for all connectors. */ - - for_each_connector_in_state(state, drm_connector, connector_state, i) { - connector = to_intel_connector(drm_connector); + ret = drm_atomic_add_affected_connectors(state, crtc); + if (ret) + return ret; - if (!connector_state->best_encoder) { - ret = drm_atomic_set_crtc_for_connector(connector_state, - NULL); - if (ret) - return ret; + ret = intel_modeset_pipe_config(crtc, pipe_config); + if (ret) + return ret; - continue; + if (i915.fastboot && + intel_pipe_config_compare(state->dev, + to_intel_crtc_state(crtc->state), + pipe_config, true)) { + crtc_state->mode_changed = false; } - if (intel_connector_in_mode_set(connector, set)) { - struct drm_crtc *crtc = connector->base.state->crtc; - - /* If this connector was in a previous crtc, add it - * to the state. We might need to disable it. */ - if (crtc) { - crtc_state = - drm_atomic_get_crtc_state(state, crtc); - if (IS_ERR(crtc_state)) - return PTR_ERR(crtc_state); - } + if (needs_modeset(crtc_state)) { + any_ms = true; - ret = drm_atomic_set_crtc_for_connector(connector_state, - set->crtc); + ret = drm_atomic_add_affected_planes(state, crtc); if (ret) return ret; } - /* Make sure the new CRTC will work with the encoder */ - if (!drm_encoder_crtc_ok(connector_state->best_encoder, - connector_state->crtc)) { - return -EINVAL; - } - - DRM_DEBUG_KMS("[CONNECTOR:%d:%s] to [CRTC:%d]\n", - connector->base.base.id, - connector->base.name, - connector_state->crtc->base.id); - - if (connector_state->best_encoder != &connector->encoder->base) - connector->encoder = - to_intel_encoder(connector_state->best_encoder); + intel_dump_pipe_config(to_intel_crtc(crtc), pipe_config, + needs_modeset(crtc_state) ? + "[modeset]" : "[fastset]"); } - for_each_crtc_in_state(state, crtc, crtc_state, i) { - bool has_connectors; + if (any_ms) { + ret = intel_modeset_checks(state); - ret = drm_atomic_add_affected_connectors(state, crtc); if (ret) return ret; + } else + to_intel_atomic_state(state)->cdclk = + to_i915(state->dev)->cdclk_freq; + + return drm_atomic_helper_check_planes(state->dev, state); +} + +/** + * intel_atomic_commit - commit validated state object + * @dev: DRM device + * @state: the top-level driver state object + * @async: asynchronous commit + * + * This function commits a top-level state object that has been validated + * with drm_atomic_helper_check(). + * + * FIXME: Atomic modeset support for i915 is not yet complete. At the moment + * we can only handle plane-related operations and do not yet support + * asynchronous commit. + * + * RETURNS + * Zero for success or -errno. + */ +static int intel_atomic_commit(struct drm_device *dev, + struct drm_atomic_state *state, + bool async) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct drm_crtc *crtc; + struct drm_crtc_state *crtc_state; + int ret = 0; + int i; + bool any_ms = false; - has_connectors = !!drm_atomic_connectors_for_crtc(state, crtc); - if (has_connectors != crtc_state->enable) - crtc_state->enable = - crtc_state->active = has_connectors; + if (async) { + DRM_DEBUG_KMS("i915 does not yet support async commit\n"); + return -EINVAL; } - ret = intel_modeset_setup_plane_state(state, set->crtc, set->mode, - set->fb, set->x, set->y); + ret = drm_atomic_helper_prepare_planes(dev, state); if (ret) return ret; - crtc_state = drm_atomic_get_crtc_state(state, set->crtc); - if (IS_ERR(crtc_state)) - return PTR_ERR(crtc_state); + drm_atomic_helper_swap_state(dev, state); - if (set->mode) - drm_mode_copy(&crtc_state->mode, set->mode); + for_each_crtc_in_state(state, crtc, crtc_state, i) { + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - if (set->num_connectors) - crtc_state->active = true; + if (!needs_modeset(crtc->state)) + continue; - return 0; -} + any_ms = true; + intel_pre_plane_update(intel_crtc); -static bool primary_plane_visible(struct drm_crtc *crtc) -{ - struct intel_plane_state *plane_state = - to_intel_plane_state(crtc->primary->state); + if (crtc_state->active) { + intel_crtc_disable_planes(crtc, crtc_state->plane_mask); + dev_priv->display.crtc_disable(crtc); + intel_crtc->active = false; + intel_disable_shared_dpll(intel_crtc); + } + } - return plane_state->visible; -} + /* Only after disabling all output pipelines that will be changed can we + * update the the output configuration. */ + intel_modeset_update_crtc_state(state); -static int intel_crtc_set_config(struct drm_mode_set *set) -{ - struct drm_device *dev; - struct drm_atomic_state *state = NULL; - struct intel_crtc_state *pipe_config; - bool primary_plane_was_visible; - int ret; + if (any_ms) { + intel_shared_dpll_commit(state); - BUG_ON(!set); - BUG_ON(!set->crtc); - BUG_ON(!set->crtc->helper_private); + drm_atomic_helper_update_legacy_modeset_state(state->dev, state); + modeset_update_crtc_power_domains(state); + } - /* Enforce sane interface api - has been abused by the fb helper. */ - BUG_ON(!set->mode && set->fb); - BUG_ON(set->fb && set->num_connectors == 0); + /* Now enable the clocks, plane, pipe, and connectors that we set up. */ + for_each_crtc_in_state(state, crtc, crtc_state, i) { + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + bool modeset = needs_modeset(crtc->state); - if (set->fb) { - DRM_DEBUG_KMS("[CRTC:%d] [FB:%d] #connectors=%d (x y) (%i %i)\n", - set->crtc->base.id, set->fb->base.id, - (int)set->num_connectors, set->x, set->y); - } else { - DRM_DEBUG_KMS("[CRTC:%d] [NOFB]\n", set->crtc->base.id); - } + if (modeset && crtc->state->active) { + update_scanline_offset(to_intel_crtc(crtc)); + dev_priv->display.crtc_enable(crtc); + } - dev = set->crtc->dev; + if (!modeset) + intel_pre_plane_update(intel_crtc); - state = drm_atomic_state_alloc(dev); - if (!state) - return -ENOMEM; + drm_atomic_helper_commit_planes_on_crtc(crtc_state); + intel_post_plane_update(intel_crtc); + } - state->acquire_ctx = dev->mode_config.acquire_ctx; + /* FIXME: add subpixel order */ - ret = intel_modeset_stage_output_state(dev, set, state); - if (ret) - goto out; + drm_atomic_helper_wait_for_vblanks(dev, state); + drm_atomic_helper_cleanup_planes(dev, state); - pipe_config = intel_modeset_compute_config(set->crtc, state); - if (IS_ERR(pipe_config)) { - ret = PTR_ERR(pipe_config); - goto out; - } + if (any_ms) + intel_modeset_check_state(dev, state); - intel_update_pipe_size(to_intel_crtc(set->crtc)); + drm_atomic_state_free(state); - primary_plane_was_visible = primary_plane_visible(set->crtc); + return 0; +} - ret = intel_set_mode_with_config(set->crtc, pipe_config, true); +void intel_crtc_restore_mode(struct drm_crtc *crtc) +{ + struct drm_device *dev = crtc->dev; + struct drm_atomic_state *state; + struct drm_crtc_state *crtc_state; + int ret; - if (ret == 0 && - pipe_config->base.enable && - pipe_config->base.planes_changed && - !needs_modeset(&pipe_config->base)) { - struct intel_crtc *intel_crtc = to_intel_crtc(set->crtc); + state = drm_atomic_state_alloc(dev); + if (!state) { + DRM_DEBUG_KMS("[CRTC:%d] crtc restore failed, out of memory", + crtc->base.id); + return; + } - /* - * We need to make sure the primary plane is re-enabled if it - * has previously been turned off. - */ - if (ret == 0 && !primary_plane_was_visible && - primary_plane_visible(set->crtc)) { - WARN_ON(!intel_crtc->active); - intel_post_enable_primary(set->crtc); - } + state->acquire_ctx = drm_modeset_legacy_acquire_ctx(crtc); - /* - * In the fastboot case this may be our only check of the - * state after boot. It would be better to only do it on - * the first update, but we don't have a nice way of doing that - * (and really, set_config isn't used much for high freq page - * flipping, so increasing its cost here shouldn't be a big - * deal). - */ - if (i915.fastboot && ret == 0) - intel_modeset_check_state(set->crtc->dev); +retry: + crtc_state = drm_atomic_get_crtc_state(state, crtc); + ret = PTR_ERR_OR_ZERO(crtc_state); + if (!ret) { + if (!crtc_state->active) + goto out; + + crtc_state->mode_changed = true; + ret = drm_atomic_commit(state); } - if (ret) { - DRM_DEBUG_KMS("failed to set mode on [CRTC:%d], err = %d\n", - set->crtc->base.id, ret); + if (ret == -EDEADLK) { + drm_atomic_state_clear(state); + drm_modeset_backoff(state->acquire_ctx); + goto retry; } -out: if (ret) +out: drm_atomic_state_free(state); - return ret; } +#undef for_each_intel_crtc_masked + static const struct drm_crtc_funcs intel_crtc_funcs = { .gamma_set = intel_crtc_gamma_set, - .set_config = intel_crtc_set_config, + .set_config = drm_atomic_helper_set_config, .destroy = intel_crtc_destroy, .page_flip = intel_crtc_page_flip, .atomic_duplicate_state = intel_crtc_duplicate_state, @@ -13087,6 +13287,8 @@ static void intel_shared_dpll_init(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; + intel_update_cdclk(dev); + if (HAS_DDI(dev)) intel_ddi_pll_init(dev); else if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) @@ -13098,28 +13300,6 @@ static void intel_shared_dpll_init(struct drm_device *dev) } /** - * intel_wm_need_update - Check whether watermarks need updating - * @plane: drm plane - * @state: new plane state - * - * Check current plane state versus the new one to determine whether - * watermarks need to be recalculated. - * - * Returns true or false. - */ -bool intel_wm_need_update(struct drm_plane *plane, - struct drm_plane_state *state) -{ - /* Update watermarks on tiling changes. */ - if (!plane->state->fb || !state->fb || - plane->state->fb->modifier[0] != state->fb->modifier[0] || - plane->state->rotation != state->rotation) - return true; - - return false; -} - -/** * intel_prepare_plane_fb - Prepare fb for usage on plane * @plane: drm plane to prepare for * @fb: framebuffer to prepare for presentation @@ -13138,27 +13318,13 @@ intel_prepare_plane_fb(struct drm_plane *plane, { struct drm_device *dev = plane->dev; struct intel_plane *intel_plane = to_intel_plane(plane); - enum pipe pipe = intel_plane->pipe; struct drm_i915_gem_object *obj = intel_fb_obj(fb); struct drm_i915_gem_object *old_obj = intel_fb_obj(plane->fb); - unsigned frontbuffer_bits = 0; int ret = 0; if (!obj) return 0; - switch (plane->type) { - case DRM_PLANE_TYPE_PRIMARY: - frontbuffer_bits = INTEL_FRONTBUFFER_PRIMARY(pipe); - break; - case DRM_PLANE_TYPE_CURSOR: - frontbuffer_bits = INTEL_FRONTBUFFER_CURSOR(pipe); - break; - case DRM_PLANE_TYPE_OVERLAY: - frontbuffer_bits = INTEL_FRONTBUFFER_SPRITE(pipe); - break; - } - mutex_lock(&dev->struct_mutex); if (plane->type == DRM_PLANE_TYPE_CURSOR && @@ -13168,11 +13334,11 @@ intel_prepare_plane_fb(struct drm_plane *plane, if (ret) DRM_DEBUG_KMS("failed to attach phys object\n"); } else { - ret = intel_pin_and_fence_fb_obj(plane, fb, new_state, NULL); + ret = intel_pin_and_fence_fb_obj(plane, fb, new_state, NULL, NULL); } if (ret == 0) - i915_gem_track_fb(old_obj, obj, frontbuffer_bits); + i915_gem_track_fb(old_obj, obj, intel_plane->frontbuffer_bit); mutex_unlock(&dev->struct_mutex); @@ -13219,7 +13385,7 @@ skl_max_scale(struct intel_crtc *intel_crtc, struct intel_crtc_state *crtc_state dev = intel_crtc->base.dev; dev_priv = dev->dev_private; crtc_clock = crtc_state->base.adjusted_mode.crtc_clock; - cdclk = dev_priv->display.get_display_clock_speed(dev); + cdclk = to_intel_atomic_state(crtc_state->base.state)->cdclk; if (!crtc_clock || !cdclk) return DRM_PLANE_HELPER_NO_SCALING; @@ -13237,105 +13403,28 @@ skl_max_scale(struct intel_crtc *intel_crtc, struct intel_crtc_state *crtc_state static int intel_check_primary_plane(struct drm_plane *plane, + struct intel_crtc_state *crtc_state, struct intel_plane_state *state) { - struct drm_device *dev = plane->dev; - struct drm_i915_private *dev_priv = dev->dev_private; struct drm_crtc *crtc = state->base.crtc; - struct intel_crtc *intel_crtc; - struct intel_crtc_state *crtc_state; struct drm_framebuffer *fb = state->base.fb; - struct drm_rect *dest = &state->dst; - struct drm_rect *src = &state->src; - const struct drm_rect *clip = &state->clip; - bool can_position = false; - int max_scale = DRM_PLANE_HELPER_NO_SCALING; int min_scale = DRM_PLANE_HELPER_NO_SCALING; - int ret; - - crtc = crtc ? crtc : plane->crtc; - intel_crtc = to_intel_crtc(crtc); - crtc_state = state->base.state ? - intel_atomic_get_crtc_state(state->base.state, intel_crtc) : NULL; + int max_scale = DRM_PLANE_HELPER_NO_SCALING; + bool can_position = false; - if (INTEL_INFO(dev)->gen >= 9) { - /* use scaler when colorkey is not required */ - if (to_intel_plane(plane)->ckey.flags == I915_SET_COLORKEY_NONE) { - min_scale = 1; - max_scale = skl_max_scale(intel_crtc, crtc_state); - } + /* use scaler when colorkey is not required */ + if (INTEL_INFO(plane->dev)->gen >= 9 && + state->ckey.flags == I915_SET_COLORKEY_NONE) { + min_scale = 1; + max_scale = skl_max_scale(to_intel_crtc(crtc), crtc_state); can_position = true; } - ret = drm_plane_helper_check_update(plane, crtc, fb, - src, dest, clip, - min_scale, - max_scale, - can_position, true, - &state->visible); - if (ret) - return ret; - - if (intel_crtc->active) { - struct intel_plane_state *old_state = - to_intel_plane_state(plane->state); - - intel_crtc->atomic.wait_for_flips = true; - - /* - * FBC does not work on some platforms for rotated - * planes, so disable it when rotation is not 0 and - * update it when rotation is set back to 0. - * - * FIXME: This is redundant with the fbc update done in - * the primary plane enable function except that that - * one is done too late. We eventually need to unify - * this. - */ - if (state->visible && - INTEL_INFO(dev)->gen <= 4 && !IS_G4X(dev) && - dev_priv->fbc.crtc == intel_crtc && - state->base.rotation != BIT(DRM_ROTATE_0)) { - intel_crtc->atomic.disable_fbc = true; - } - - if (state->visible && !old_state->visible) { - /* - * BDW signals flip done immediately if the plane - * is disabled, even if the plane enable is already - * armed to occur at the next vblank :( - */ - if (IS_BROADWELL(dev)) - intel_crtc->atomic.wait_vblank = true; - } - - /* - * FIXME: Actually if we will still have any other plane enabled - * on the pipe we could let IPS enabled still, but for - * now lets consider that when we make primary invisible - * by setting DSPCNTR to 0 on update_primary_plane function - * IPS needs to be disable. - */ - if (!state->visible || !fb) - intel_crtc->atomic.disable_ips = true; - - intel_crtc->atomic.fb_bits |= - INTEL_FRONTBUFFER_PRIMARY(intel_crtc->pipe); - - intel_crtc->atomic.update_fbc = true; - - if (intel_wm_need_update(plane, &state->base)) - intel_crtc->atomic.update_wm = true; - } - - if (INTEL_INFO(dev)->gen >= 9) { - ret = skl_update_scaler_users(intel_crtc, crtc_state, - to_intel_plane(plane), state, 0); - if (ret) - return ret; - } - - return 0; + return drm_plane_helper_check_update(plane, crtc, fb, &state->src, + &state->dst, &state->clip, + min_scale, max_scale, + can_position, true, + &state->visible); } static void @@ -13356,20 +13445,19 @@ intel_commit_primary_plane(struct drm_plane *plane, crtc->x = src->x1 >> 16; crtc->y = src->y1 >> 16; - if (intel_crtc->active) { - if (state->visible) - /* FIXME: kill this fastboot hack */ - intel_update_pipe_size(intel_crtc); + if (!crtc->state->active) + return; - dev_priv->display.update_primary_plane(crtc, plane->fb, - crtc->x, crtc->y); - } + if (state->visible) + /* FIXME: kill this fastboot hack */ + intel_update_pipe_size(intel_crtc); + + dev_priv->display.update_primary_plane(crtc, fb, crtc->x, crtc->y); } static void intel_disable_primary_plane(struct drm_plane *plane, - struct drm_crtc *crtc, - bool force) + struct drm_crtc *crtc) { struct drm_device *dev = plane->dev; struct drm_i915_private *dev_priv = dev->dev_private; @@ -13377,96 +13465,30 @@ intel_disable_primary_plane(struct drm_plane *plane, dev_priv->display.update_primary_plane(crtc, NULL, 0, 0); } -static void intel_begin_crtc_commit(struct drm_crtc *crtc) +static void intel_begin_crtc_commit(struct drm_crtc *crtc, + struct drm_crtc_state *old_crtc_state) { struct drm_device *dev = crtc->dev; - struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - struct intel_plane *intel_plane; - struct drm_plane *p; - unsigned fb_bits = 0; - /* Track fb's for any planes being disabled */ - list_for_each_entry(p, &dev->mode_config.plane_list, head) { - intel_plane = to_intel_plane(p); - - if (intel_crtc->atomic.disabled_planes & - (1 << drm_plane_index(p))) { - switch (p->type) { - case DRM_PLANE_TYPE_PRIMARY: - fb_bits = INTEL_FRONTBUFFER_PRIMARY(intel_plane->pipe); - break; - case DRM_PLANE_TYPE_CURSOR: - fb_bits = INTEL_FRONTBUFFER_CURSOR(intel_plane->pipe); - break; - case DRM_PLANE_TYPE_OVERLAY: - fb_bits = INTEL_FRONTBUFFER_SPRITE(intel_plane->pipe); - break; - } - - mutex_lock(&dev->struct_mutex); - i915_gem_track_fb(intel_fb_obj(p->fb), NULL, fb_bits); - mutex_unlock(&dev->struct_mutex); - } - } - - if (intel_crtc->atomic.wait_for_flips) - intel_crtc_wait_for_pending_flips(crtc); - - if (intel_crtc->atomic.disable_fbc) - intel_fbc_disable(dev); - - if (intel_crtc->atomic.disable_ips) - hsw_disable_ips(intel_crtc); - - if (intel_crtc->atomic.pre_disable_primary) - intel_pre_disable_primary(crtc); - - if (intel_crtc->atomic.update_wm) + if (intel_crtc->atomic.update_wm_pre) intel_update_watermarks(crtc); - intel_runtime_pm_get(dev_priv); - /* Perform vblank evasion around commit operation */ - if (intel_crtc->active) - intel_crtc->atomic.evade = - intel_pipe_update_start(intel_crtc, - &intel_crtc->atomic.start_vbl_count); + if (crtc->state->active) + intel_pipe_update_start(intel_crtc, &intel_crtc->start_vbl_count); + + if (!needs_modeset(crtc->state) && INTEL_INFO(dev)->gen >= 9) + skl_detach_scalers(intel_crtc); } -static void intel_finish_crtc_commit(struct drm_crtc *crtc) +static void intel_finish_crtc_commit(struct drm_crtc *crtc, + struct drm_crtc_state *old_crtc_state) { - struct drm_device *dev = crtc->dev; - struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - struct drm_plane *p; - - if (intel_crtc->atomic.evade) - intel_pipe_update_end(intel_crtc, - intel_crtc->atomic.start_vbl_count); - - intel_runtime_pm_put(dev_priv); - - if (intel_crtc->atomic.wait_vblank) - intel_wait_for_vblank(dev, intel_crtc->pipe); - - intel_frontbuffer_flip(dev, intel_crtc->atomic.fb_bits); - - if (intel_crtc->atomic.update_fbc) { - mutex_lock(&dev->struct_mutex); - intel_fbc_update(dev); - mutex_unlock(&dev->struct_mutex); - } - - if (intel_crtc->atomic.post_enable_primary) - intel_post_enable_primary(crtc); - drm_for_each_legacy_plane(p, &dev->mode_config.plane_list) - if (intel_crtc->atomic.update_sprite_watermarks & drm_plane_index(p)) - intel_update_sprite_watermarks(p, crtc, 0, 0, 0, - false, false); - - memset(&intel_crtc->atomic, 0, sizeof(intel_crtc->atomic)); + if (crtc->state->active) + intel_pipe_update_end(intel_crtc, intel_crtc->start_vbl_count); } /** @@ -13501,7 +13523,7 @@ static struct drm_plane *intel_primary_plane_create(struct drm_device *dev, struct intel_plane *primary; struct intel_plane_state *state; const uint32_t *intel_primary_formats; - int num_formats; + unsigned int num_formats; primary = kzalloc(sizeof(*primary), GFP_KERNEL); if (primary == NULL) @@ -13522,10 +13544,10 @@ static struct drm_plane *intel_primary_plane_create(struct drm_device *dev, } primary->pipe = pipe; primary->plane = pipe; + primary->frontbuffer_bit = INTEL_FRONTBUFFER_PRIMARY(pipe); primary->check_plane = intel_check_primary_plane; primary->commit_plane = intel_commit_primary_plane; primary->disable_plane = intel_disable_primary_plane; - primary->ckey.flags = I915_SET_COLORKEY_NONE; if (HAS_FBC(dev) && INTEL_INFO(dev)->gen < 4) primary->plane = !pipe; @@ -13573,37 +13595,29 @@ void intel_create_rotation_property(struct drm_device *dev, struct intel_plane * static int intel_check_cursor_plane(struct drm_plane *plane, + struct intel_crtc_state *crtc_state, struct intel_plane_state *state) { - struct drm_crtc *crtc = state->base.crtc; - struct drm_device *dev = plane->dev; + struct drm_crtc *crtc = crtc_state->base.crtc; struct drm_framebuffer *fb = state->base.fb; - struct drm_rect *dest = &state->dst; - struct drm_rect *src = &state->src; - const struct drm_rect *clip = &state->clip; struct drm_i915_gem_object *obj = intel_fb_obj(fb); - struct intel_crtc *intel_crtc; unsigned stride; int ret; - crtc = crtc ? crtc : plane->crtc; - intel_crtc = to_intel_crtc(crtc); - - ret = drm_plane_helper_check_update(plane, crtc, fb, - src, dest, clip, + ret = drm_plane_helper_check_update(plane, crtc, fb, &state->src, + &state->dst, &state->clip, DRM_PLANE_HELPER_NO_SCALING, DRM_PLANE_HELPER_NO_SCALING, true, true, &state->visible); if (ret) return ret; - /* if we want to turn off the cursor ignore width and height */ if (!obj) - goto finish; + return 0; /* Check for which cursor types we support */ - if (!cursor_size_ok(dev, state->base.crtc_w, state->base.crtc_h)) { + if (!cursor_size_ok(plane->dev, state->base.crtc_w, state->base.crtc_h)) { DRM_DEBUG("Cursor dimension %dx%d not supported\n", state->base.crtc_w, state->base.crtc_h); return -EINVAL; @@ -13617,34 +13631,16 @@ intel_check_cursor_plane(struct drm_plane *plane, if (fb->modifier[0] != DRM_FORMAT_MOD_NONE) { DRM_DEBUG_KMS("cursor cannot be tiled\n"); - ret = -EINVAL; - } - -finish: - if (intel_crtc->active) { - if (plane->state->crtc_w != state->base.crtc_w) - intel_crtc->atomic.update_wm = true; - - intel_crtc->atomic.fb_bits |= - INTEL_FRONTBUFFER_CURSOR(intel_crtc->pipe); + return -EINVAL; } - return ret; + return 0; } static void intel_disable_cursor_plane(struct drm_plane *plane, - struct drm_crtc *crtc, - bool force) + struct drm_crtc *crtc) { - struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - - if (!force) { - plane->fb = NULL; - intel_crtc->cursor_bo = NULL; - intel_crtc->cursor_addr = 0; - } - intel_crtc_update_cursor(crtc, false); } @@ -13677,9 +13673,9 @@ intel_commit_cursor_plane(struct drm_plane *plane, intel_crtc->cursor_addr = addr; intel_crtc->cursor_bo = obj; -update: - if (intel_crtc->active) +update: + if (crtc->state->active) intel_crtc_update_cursor(crtc, state->visible); } @@ -13704,6 +13700,7 @@ static struct drm_plane *intel_cursor_plane_create(struct drm_device *dev, cursor->max_downscale = 1; cursor->pipe = pipe; cursor->plane = pipe; + cursor->frontbuffer_bit = INTEL_FRONTBUFFER_CURSOR(pipe); cursor->check_plane = intel_check_cursor_plane; cursor->commit_plane = intel_commit_cursor_plane; cursor->disable_plane = intel_disable_cursor_plane; @@ -13744,8 +13741,6 @@ static void skl_init_scalers(struct drm_device *dev, struct intel_crtc *intel_cr for (i = 0; i < intel_crtc->num_scalers; i++) { intel_scaler = &scaler_state->scalers[i]; intel_scaler->in_use = 0; - intel_scaler->id = i; - intel_scaler->mode = PS_SCALER_MODE_DYN; } @@ -13817,6 +13812,8 @@ static void intel_crtc_init(struct drm_device *dev, int pipe) intel_crtc->cursor_cntl = ~0; intel_crtc->cursor_size = ~0; + intel_crtc->wm.cxsr_allowed = true; + BUG_ON(pipe >= ARRAY_SIZE(dev_priv->plane_to_crtc_mapping) || dev_priv->plane_to_crtc_mapping[intel_crtc->plane] != NULL); dev_priv->plane_to_crtc_mapping[intel_crtc->plane] = &intel_crtc->base; @@ -13951,8 +13948,7 @@ static void intel_setup_outputs(struct drm_device *dev) */ found = I915_READ(DDI_BUF_CTL_A) & DDI_INIT_DISPLAY_DETECTED; /* WaIgnoreDDIAStrap: skl */ - if (found || - (IS_SKYLAKE(dev) && INTEL_REVID(dev) < SKL_REVID_D0)) + if (found || IS_SKYLAKE(dev)) intel_ddi_init(dev, PORT_A); /* DDI B, C and D detection is indicated by the SFUSE_STRAP @@ -13965,6 +13961,15 @@ static void intel_setup_outputs(struct drm_device *dev) intel_ddi_init(dev, PORT_C); if (found & SFUSE_STRAP_DDID_DETECTED) intel_ddi_init(dev, PORT_D); + /* + * On SKL we don't have a way to detect DDI-E so we rely on VBT. + */ + if (IS_SKYLAKE(dev) && + (dev_priv->vbt.ddi_port_info[PORT_E].supports_dp || + dev_priv->vbt.ddi_port_info[PORT_E].supports_dvi || + dev_priv->vbt.ddi_port_info[PORT_E].supports_hdmi)) + intel_ddi_init(dev, PORT_E); + } else if (HAS_PCH_SPLIT(dev)) { int found; dpd_is_edp = intel_dp_is_edp(dev, PORT_D); @@ -14028,18 +14033,18 @@ static void intel_setup_outputs(struct drm_device *dev) } intel_dsi_init(dev); - } else if (SUPPORTS_DIGITAL_OUTPUTS(dev)) { + } else if (!IS_GEN2(dev) && !IS_PINEVIEW(dev)) { bool found = false; if (I915_READ(GEN3_SDVOB) & SDVO_DETECTED) { DRM_DEBUG_KMS("probing SDVOB\n"); found = intel_sdvo_init(dev, GEN3_SDVOB, true); - if (!found && SUPPORTS_INTEGRATED_HDMI(dev)) { + if (!found && IS_G4X(dev)) { DRM_DEBUG_KMS("probing HDMI on SDVOB\n"); intel_hdmi_init(dev, GEN4_HDMIB, PORT_B); } - if (!found && SUPPORTS_INTEGRATED_DP(dev)) + if (!found && IS_G4X(dev)) intel_dp_init(dev, DP_B, PORT_B); } @@ -14052,15 +14057,15 @@ static void intel_setup_outputs(struct drm_device *dev) if (!found && (I915_READ(GEN3_SDVOC) & SDVO_DETECTED)) { - if (SUPPORTS_INTEGRATED_HDMI(dev)) { + if (IS_G4X(dev)) { DRM_DEBUG_KMS("probing HDMI on SDVOC\n"); intel_hdmi_init(dev, GEN4_HDMIC, PORT_C); } - if (SUPPORTS_INTEGRATED_DP(dev)) + if (IS_G4X(dev)) intel_dp_init(dev, DP_C, PORT_C); } - if (SUPPORTS_INTEGRATED_DP(dev) && + if (IS_G4X(dev) && (I915_READ(DP_D) & DP_DETECTED)) intel_dp_init(dev, DP_D, PORT_D); } else if (IS_GEN2(dev)) @@ -14105,9 +14110,27 @@ static int intel_user_framebuffer_create_handle(struct drm_framebuffer *fb, return drm_gem_handle_create(file, &obj->base, handle); } +static int intel_user_framebuffer_dirty(struct drm_framebuffer *fb, + struct drm_file *file, + unsigned flags, unsigned color, + struct drm_clip_rect *clips, + unsigned num_clips) +{ + struct drm_device *dev = fb->dev; + struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb); + struct drm_i915_gem_object *obj = intel_fb->obj; + + mutex_lock(&dev->struct_mutex); + intel_fb_obj_flush(obj, false, ORIGIN_DIRTYFB); + mutex_unlock(&dev->struct_mutex); + + return 0; +} + static const struct drm_framebuffer_funcs intel_fb_funcs = { .destroy = intel_user_framebuffer_destroy, .create_handle = intel_user_framebuffer_create_handle, + .dirty = intel_user_framebuffer_dirty, }; static @@ -14302,7 +14325,7 @@ intel_user_framebuffer_create(struct drm_device *dev, return intel_framebuffer_create(dev, mode_cmd, obj); } -#ifndef CONFIG_DRM_I915_FBDEV +#ifndef CONFIG_DRM_FBDEV_EMULATION static inline void intel_fbdev_output_poll_changed(struct drm_device *dev) { } @@ -14313,6 +14336,8 @@ static const struct drm_mode_config_funcs intel_mode_funcs = { .output_poll_changed = intel_fbdev_output_poll_changed, .atomic_check = intel_atomic_check, .atomic_commit = intel_atomic_commit, + .atomic_state_alloc = intel_atomic_state_alloc, + .atomic_state_clear = intel_atomic_state_clear, }; /* Set up chip specific display functions */ @@ -14339,7 +14364,6 @@ static void intel_init_display(struct drm_device *dev) haswell_crtc_compute_clock; dev_priv->display.crtc_enable = haswell_crtc_enable; dev_priv->display.crtc_disable = haswell_crtc_disable; - dev_priv->display.off = ironlake_crtc_off; dev_priv->display.update_primary_plane = skylake_update_primary_plane; } else if (HAS_DDI(dev)) { @@ -14350,7 +14374,6 @@ static void intel_init_display(struct drm_device *dev) haswell_crtc_compute_clock; dev_priv->display.crtc_enable = haswell_crtc_enable; dev_priv->display.crtc_disable = haswell_crtc_disable; - dev_priv->display.off = ironlake_crtc_off; dev_priv->display.update_primary_plane = ironlake_update_primary_plane; } else if (HAS_PCH_SPLIT(dev)) { @@ -14361,7 +14384,6 @@ static void intel_init_display(struct drm_device *dev) ironlake_crtc_compute_clock; dev_priv->display.crtc_enable = ironlake_crtc_enable; dev_priv->display.crtc_disable = ironlake_crtc_disable; - dev_priv->display.off = ironlake_crtc_off; dev_priv->display.update_primary_plane = ironlake_update_primary_plane; } else if (IS_VALLEYVIEW(dev)) { @@ -14371,7 +14393,6 @@ static void intel_init_display(struct drm_device *dev) dev_priv->display.crtc_compute_clock = i9xx_crtc_compute_clock; dev_priv->display.crtc_enable = valleyview_crtc_enable; dev_priv->display.crtc_disable = i9xx_crtc_disable; - dev_priv->display.off = i9xx_crtc_off; dev_priv->display.update_primary_plane = i9xx_update_primary_plane; } else { @@ -14381,7 +14402,6 @@ static void intel_init_display(struct drm_device *dev) dev_priv->display.crtc_compute_clock = i9xx_crtc_compute_clock; dev_priv->display.crtc_enable = i9xx_crtc_enable; dev_priv->display.crtc_disable = i9xx_crtc_disable; - dev_priv->display.off = i9xx_crtc_off; dev_priv->display.update_primary_plane = i9xx_update_primary_plane; } @@ -14390,6 +14410,9 @@ static void intel_init_display(struct drm_device *dev) if (IS_SKYLAKE(dev)) dev_priv->display.get_display_clock_speed = skylake_get_display_clock_speed; + else if (IS_BROXTON(dev)) + dev_priv->display.get_display_clock_speed = + broxton_get_display_clock_speed; else if (IS_BROADWELL(dev)) dev_priv->display.get_display_clock_speed = broadwell_get_display_clock_speed; @@ -14403,9 +14426,21 @@ static void intel_init_display(struct drm_device *dev) dev_priv->display.get_display_clock_speed = ilk_get_display_clock_speed; else if (IS_I945G(dev) || IS_BROADWATER(dev) || - IS_GEN6(dev) || IS_IVYBRIDGE(dev) || (IS_G33(dev) && !IS_PINEVIEW_M(dev))) + IS_GEN6(dev) || IS_IVYBRIDGE(dev)) dev_priv->display.get_display_clock_speed = i945_get_display_clock_speed; + else if (IS_GM45(dev)) + dev_priv->display.get_display_clock_speed = + gm45_get_display_clock_speed; + else if (IS_CRESTLINE(dev)) + dev_priv->display.get_display_clock_speed = + i965gm_get_display_clock_speed; + else if (IS_PINEVIEW(dev)) + dev_priv->display.get_display_clock_speed = + pnv_get_display_clock_speed; + else if (IS_G33(dev) || IS_G4X(dev)) + dev_priv->display.get_display_clock_speed = + g33_get_display_clock_speed; else if (IS_I915G(dev)) dev_priv->display.get_display_clock_speed = i915_get_display_clock_speed; @@ -14423,10 +14458,12 @@ static void intel_init_display(struct drm_device *dev) i865_get_display_clock_speed; else if (IS_I85X(dev)) dev_priv->display.get_display_clock_speed = - i855_get_display_clock_speed; - else /* 852, 830 */ + i85x_get_display_clock_speed; + else { /* 830 */ + WARN(!IS_I830(dev), "Unknown platform. Assuming 133 MHz CDCLK\n"); dev_priv->display.get_display_clock_speed = i830_get_display_clock_speed; + } if (IS_GEN5(dev)) { dev_priv->display.fdi_link_train = ironlake_fdi_link_train; @@ -14437,12 +14474,22 @@ static void intel_init_display(struct drm_device *dev) dev_priv->display.fdi_link_train = ivb_manual_fdi_link_train; } else if (IS_HASWELL(dev) || IS_BROADWELL(dev)) { dev_priv->display.fdi_link_train = hsw_fdi_link_train; + if (IS_BROADWELL(dev)) { + dev_priv->display.modeset_commit_cdclk = + broadwell_modeset_commit_cdclk; + dev_priv->display.modeset_calc_cdclk = + broadwell_modeset_calc_cdclk; + } } else if (IS_VALLEYVIEW(dev)) { - dev_priv->display.modeset_global_resources = - valleyview_modeset_global_resources; + dev_priv->display.modeset_commit_cdclk = + valleyview_modeset_commit_cdclk; + dev_priv->display.modeset_calc_cdclk = + valleyview_modeset_calc_cdclk; } else if (IS_BROXTON(dev)) { - dev_priv->display.modeset_global_resources = - broxton_modeset_global_resources; + dev_priv->display.modeset_commit_cdclk = + broxton_modeset_commit_cdclk; + dev_priv->display.modeset_calc_cdclk = + broxton_modeset_calc_cdclk; } switch (INTEL_INFO(dev)->gen) { @@ -14661,13 +14708,9 @@ static void i915_disable_vga(struct drm_device *dev) void intel_modeset_init_hw(struct drm_device *dev) { + intel_update_cdclk(dev); intel_prepare_ddi(dev); - - if (IS_VALLEYVIEW(dev)) - vlv_update_cdclk(dev); - intel_init_clock_gating(dev); - intel_enable_gt_powersave(dev); } @@ -14697,6 +14740,24 @@ void intel_modeset_init(struct drm_device *dev) if (INTEL_INFO(dev)->num_pipes == 0) return; + /* + * There may be no VBT; and if the BIOS enabled SSC we can + * just keep using it to avoid unnecessary flicker. Whereas if the + * BIOS isn't using it, don't assume it will work even if the VBT + * indicates as much. + */ + if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) { + bool bios_lvds_use_ssc = !!(I915_READ(PCH_DREF_CONTROL) & + DREF_SSC1_ENABLE); + + if (dev_priv->vbt.lvds_use_ssc != bios_lvds_use_ssc) { + DRM_DEBUG_KMS("SSC %sabled by BIOS, overriding VBT which says %sabled\n", + bios_lvds_use_ssc ? "en" : "dis", + dev_priv->vbt.lvds_use_ssc ? "en" : "dis"); + dev_priv->vbt.lvds_use_ssc = bios_lvds_use_ssc; + } + } + intel_init_display(dev); intel_init_audio(dev); @@ -14747,13 +14808,15 @@ void intel_modeset_init(struct drm_device *dev) intel_setup_outputs(dev); /* Just in case the BIOS is doing something questionable. */ - intel_fbc_disable(dev); + intel_fbc_disable(dev_priv); drm_modeset_lock_all(dev); - intel_modeset_setup_hw_state(dev, false); + intel_modeset_setup_hw_state(dev); drm_modeset_unlock_all(dev); for_each_intel_crtc(dev, crtc) { + struct intel_initial_plane_config plane_config = {}; + if (!crtc->active) continue; @@ -14764,15 +14827,14 @@ void intel_modeset_init(struct drm_device *dev) * can even allow for smooth boot transitions if the BIOS * fb is large enough for the active pipe configuration. */ - if (dev_priv->display.get_initial_plane_config) { - dev_priv->display.get_initial_plane_config(crtc, - &crtc->plane_config); - /* - * If the fb is shared between multiple heads, we'll - * just get the first one. - */ - intel_find_initial_plane_obj(crtc, &crtc->plane_config); - } + dev_priv->display.get_initial_plane_config(crtc, + &plane_config); + + /* + * If the fb is shared between multiple heads, we'll + * just get the first one. + */ + intel_find_initial_plane_obj(crtc, &plane_config); } } @@ -14824,7 +14886,9 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc) { struct drm_device *dev = crtc->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_encoder *encoder; u32 reg; + bool enable; /* Clear any frame start delays used for debugging left by the BIOS */ reg = PIPECONF(crtc->config->cpu_transcoder); @@ -14833,6 +14897,7 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc) /* restore vblank interrupts to correct state */ drm_crtc_vblank_reset(&crtc->base); if (crtc->active) { + drm_calc_timestamping_constants(&crtc->base, &crtc->base.hwmode); update_scanline_offset(crtc); drm_crtc_vblank_on(&crtc->base); } @@ -14841,7 +14906,6 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc) * disable the crtc (and hence change the state) if it is wrong. Note * that gen4+ has a fixed plane -> pipe mapping. */ if (INTEL_INFO(dev)->gen < 4 && !intel_check_plane_mapping(crtc)) { - struct intel_connector *connector; bool plane; DRM_DEBUG_KMS("[CRTC:%d] wrong plane connection detected!\n", @@ -14853,30 +14917,8 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc) plane = crtc->plane; to_intel_plane_state(crtc->base.primary->state)->visible = true; crtc->plane = !plane; - intel_crtc_disable_planes(&crtc->base); - dev_priv->display.crtc_disable(&crtc->base); + intel_crtc_disable_noatomic(&crtc->base); crtc->plane = plane; - - /* ... and break all links. */ - for_each_intel_connector(dev, connector) { - if (connector->encoder->base.crtc != &crtc->base) - continue; - - connector->base.dpms = DRM_MODE_DPMS_OFF; - connector->base.encoder = NULL; - } - /* multiple connectors may have the same encoder: - * handle them and break crtc link separately */ - for_each_intel_connector(dev, connector) - if (connector->encoder->base.crtc == &crtc->base) { - connector->encoder->base.crtc = NULL; - connector->encoder->connectors_active = false; - } - - WARN_ON(crtc->active); - crtc->base.state->enable = false; - crtc->base.state->active = false; - crtc->base.enabled = false; } if (dev_priv->quirks & QUIRK_PIPEA_FORCE && @@ -14890,20 +14932,27 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc) /* Adjust the state of the output pipe according to whether we * have active connectors/encoders. */ - intel_crtc_update_dpms(&crtc->base); + enable = false; + for_each_encoder_on_crtc(dev, &crtc->base, encoder) { + enable = true; + break; + } - if (crtc->active != crtc->base.state->enable) { - struct intel_encoder *encoder; + if (!enable) + intel_crtc_disable_noatomic(&crtc->base); + + if (crtc->active != crtc->base.state->active) { /* This can happen either due to bugs in the get_hw_state - * functions or because the pipe is force-enabled due to the + * functions or because of calls to intel_crtc_disable_noatomic, + * or because the pipe is force-enabled due to the * pipe A quirk. */ DRM_DEBUG_KMS("[CRTC:%d] hw state adjusted, was %s, now %s\n", crtc->base.base.id, crtc->base.state->enable ? "enabled" : "disabled", crtc->active ? "enabled" : "disabled"); - crtc->base.state->enable = crtc->active; + WARN_ON(drm_atomic_set_mode_for_crtc(crtc->base.state, NULL) < 0); crtc->base.state->active = crtc->active; crtc->base.enabled = crtc->active; @@ -14914,10 +14963,8 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc) * actually up, hence no need to break them. */ WARN_ON(crtc->active); - for_each_encoder_on_crtc(dev, &crtc->base, encoder) { - WARN_ON(encoder->connectors_active); + for_each_encoder_on_crtc(dev, &crtc->base, encoder) encoder->base.crtc = NULL; - } } if (crtc->active || HAS_GMCH_DISPLAY(dev)) { @@ -14943,6 +14990,7 @@ static void intel_sanitize_encoder(struct intel_encoder *encoder) { struct intel_connector *connector; struct drm_device *dev = encoder->base.dev; + bool active = false; /* We need to check both for a crtc link (meaning that the * encoder is active and trying to read from a pipe) and the @@ -14950,7 +14998,15 @@ static void intel_sanitize_encoder(struct intel_encoder *encoder) bool has_active_crtc = encoder->base.crtc && to_intel_crtc(encoder->base.crtc)->active; - if (encoder->connectors_active && !has_active_crtc) { + for_each_intel_connector(dev, connector) { + if (connector->base.encoder != &encoder->base) + continue; + + active = true; + break; + } + + if (active && !has_active_crtc) { DRM_DEBUG_KMS("[ENCODER:%d:%s] has active connectors but no active pipe!\n", encoder->base.base.id, encoder->base.name); @@ -14967,7 +15023,6 @@ static void intel_sanitize_encoder(struct intel_encoder *encoder) encoder->post_disable(encoder); } encoder->base.crtc = NULL; - encoder->connectors_active = false; /* Inconsistent output/port/pipe state happens presumably due to * a bug in one of the get_hw_state functions. Or someplace else @@ -15016,10 +15071,31 @@ static bool primary_get_hw_state(struct intel_crtc *crtc) { struct drm_i915_private *dev_priv = crtc->base.dev->dev_private; - if (!crtc->active) - return false; + return !!(I915_READ(DSPCNTR(crtc->plane)) & DISPLAY_PLANE_ENABLE); +} + +static void readout_plane_state(struct intel_crtc *crtc, + struct intel_crtc_state *crtc_state) +{ + struct intel_plane *p; + struct intel_plane_state *plane_state; + bool active = crtc_state->base.active; - return I915_READ(DSPCNTR(crtc->plane)) & DISPLAY_PLANE_ENABLE; + for_each_intel_plane(crtc->base.dev, p) { + if (crtc->pipe != p->pipe) + continue; + + plane_state = to_intel_plane_state(p->base.state); + + if (p->base.type == DRM_PLANE_TYPE_PRIMARY) + plane_state->visible = primary_get_hw_state(crtc); + else { + if (active) + p->disable_plane(&p->base, &crtc->base); + + plane_state->visible = false; + } + } } static void intel_modeset_readout_hw_state(struct drm_device *dev) @@ -15032,22 +15108,44 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev) int i; for_each_intel_crtc(dev, crtc) { - struct drm_plane *primary = crtc->base.primary; - struct intel_plane_state *plane_state; - + __drm_atomic_helper_crtc_destroy_state(&crtc->base, crtc->base.state); memset(crtc->config, 0, sizeof(*crtc->config)); - - crtc->config->quirks |= PIPE_CONFIG_QUIRK_INHERITED_MODE; + crtc->config->base.crtc = &crtc->base; crtc->active = dev_priv->display.get_pipe_config(crtc, crtc->config); - crtc->base.state->enable = crtc->active; crtc->base.state->active = crtc->active; crtc->base.enabled = crtc->active; - plane_state = to_intel_plane_state(primary->state); - plane_state->visible = primary_get_hw_state(crtc); + memset(&crtc->base.mode, 0, sizeof(crtc->base.mode)); + if (crtc->base.state->active) { + intel_mode_from_pipe_config(&crtc->base.mode, crtc->config); + intel_mode_from_pipe_config(&crtc->base.state->adjusted_mode, crtc->config); + WARN_ON(drm_atomic_set_mode_for_crtc(crtc->base.state, &crtc->base.mode)); + + /* + * The initial mode needs to be set in order to keep + * the atomic core happy. It wants a valid mode if the + * crtc's enabled, so we do the above call. + * + * At this point some state updated by the connectors + * in their ->detect() callback has not run yet, so + * no recalculation can be done yet. + * + * Even if we could do a recalculation and modeset + * right now it would cause a double modeset if + * fbdev or userspace chooses a different initial mode. + * + * If that happens, someone indicated they wanted a + * mode change, which means it's safe to do a full + * recalculation. + */ + crtc->base.state->mode.private_flags = I915_MODE_FLAG_INHERITED; + } + + crtc->base.hwmode = crtc->config->base.adjusted_mode; + readout_plane_state(crtc, to_intel_crtc_state(crtc->base.state)); DRM_DEBUG_KMS("[CRTC:%d] hw state readout: %s\n", crtc->base.base.id, @@ -15086,7 +15184,6 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev) encoder->base.crtc = NULL; } - encoder->connectors_active = false; DRM_DEBUG_KMS("[ENCODER:%d:%s] hw state readout: %s, pipe %c\n", encoder->base.base.id, encoder->base.name, @@ -15097,7 +15194,6 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev) for_each_intel_connector(dev, connector) { if (connector->get_hw_state(connector)) { connector->base.dpms = DRM_MODE_DPMS_ON; - connector->encoder->connectors_active = true; connector->base.encoder = &connector->encoder->base; } else { connector->base.dpms = DRM_MODE_DPMS_OFF; @@ -15110,10 +15206,11 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev) } } -/* Scan out the current hw modeset state, sanitizes it and maps it into the drm - * and i915 state tracking structures. */ -void intel_modeset_setup_hw_state(struct drm_device *dev, - bool force_restore) +/* Scan out the current hw modeset state, + * and sanitizes it to the current state + */ +static void +intel_modeset_setup_hw_state(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; enum pipe pipe; @@ -15123,21 +15220,6 @@ void intel_modeset_setup_hw_state(struct drm_device *dev, intel_modeset_readout_hw_state(dev); - /* - * Now that we have the config, copy it to each CRTC struct - * Note that this could go away if we move to using crtc_config - * checking everywhere. - */ - for_each_intel_crtc(dev, crtc) { - if (crtc->active && i915.fastboot) { - intel_mode_from_pipe_config(&crtc->base.mode, - crtc->config); - DRM_DEBUG_KMS("[CRTC:%d] found active mode: ", - crtc->base.base.id); - drm_mode_debug_printmodeline(&crtc->base.mode); - } - } - /* HW state is read out, now we need to sanitize this mess. */ for_each_intel_encoder(dev, encoder) { intel_sanitize_encoder(encoder); @@ -15164,34 +15246,77 @@ void intel_modeset_setup_hw_state(struct drm_device *dev, pll->on = false; } - if (IS_GEN9(dev)) + if (IS_VALLEYVIEW(dev)) + vlv_wm_get_hw_state(dev); + else if (IS_GEN9(dev)) skl_wm_get_hw_state(dev); else if (HAS_PCH_SPLIT(dev)) ilk_wm_get_hw_state(dev); - if (force_restore) { - i915_redisable_vga(dev); + for_each_intel_crtc(dev, crtc) { + unsigned long put_domains; - /* - * We need to use raw interfaces for restoring state to avoid - * checking (bogus) intermediate states. - */ - for_each_pipe(dev_priv, pipe) { - struct drm_crtc *crtc = - dev_priv->pipe_to_crtc_mapping[pipe]; + put_domains = modeset_get_crtc_power_domains(&crtc->base); + if (WARN_ON(put_domains)) + modeset_put_power_domains(dev_priv, put_domains); + } + intel_display_set_init_power(dev_priv, false); +} - intel_crtc_restore_mode(crtc); - } - } else { - intel_modeset_update_staged_output_state(dev); +void intel_display_resume(struct drm_device *dev) +{ + struct drm_atomic_state *state = drm_atomic_state_alloc(dev); + struct intel_connector *conn; + struct intel_plane *plane; + struct drm_crtc *crtc; + int ret; + + if (!state) + return; + + state->acquire_ctx = dev->mode_config.acquire_ctx; + + /* preserve complete old state, including dpll */ + intel_atomic_get_shared_dpll_state(state); + + for_each_crtc(dev, crtc) { + struct drm_crtc_state *crtc_state = + drm_atomic_get_crtc_state(state, crtc); + + ret = PTR_ERR_OR_ZERO(crtc_state); + if (ret) + goto err; + + /* force a restore */ + crtc_state->mode_changed = true; + } + + for_each_intel_plane(dev, plane) { + ret = PTR_ERR_OR_ZERO(drm_atomic_get_plane_state(state, &plane->base)); + if (ret) + goto err; + } + + for_each_intel_connector(dev, conn) { + ret = PTR_ERR_OR_ZERO(drm_atomic_get_connector_state(state, &conn->base)); + if (ret) + goto err; } - intel_modeset_check_state(dev); + intel_modeset_setup_hw_state(dev); + + i915_redisable_vga(dev); + ret = drm_atomic_commit(state); + if (!ret) + return; + +err: + DRM_ERROR("Restoring old state failed with %i\n", ret); + drm_atomic_state_free(state); } void intel_modeset_gem_init(struct drm_device *dev) { - struct drm_i915_private *dev_priv = dev->dev_private; struct drm_crtc *c; struct drm_i915_gem_object *obj; int ret; @@ -15200,16 +15325,6 @@ void intel_modeset_gem_init(struct drm_device *dev) intel_init_gt_powersave(dev); mutex_unlock(&dev->struct_mutex); - /* - * There may be no VBT; and if the BIOS enabled SSC we can - * just keep using it to avoid unnecessary flicker. Whereas if the - * BIOS isn't using it, don't assume it will work even if the VBT - * indicates as much. - */ - if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) - dev_priv->vbt.lvds_use_ssc = !!(I915_READ(PCH_DREF_CONTROL) & - DREF_SSC1_ENABLE); - intel_modeset_init_hw(dev); intel_setup_overlay(dev); @@ -15228,14 +15343,16 @@ void intel_modeset_gem_init(struct drm_device *dev) ret = intel_pin_and_fence_fb_obj(c->primary, c->primary->fb, c->primary->state, - NULL); + NULL, NULL); mutex_unlock(&dev->struct_mutex); if (ret) { DRM_ERROR("failed to pin boot fb on pipe %d\n", to_intel_crtc(c)->pipe); drm_framebuffer_unreference(c->primary->fb); c->primary->fb = NULL; + c->primary->crtc = c->primary->state->crtc = NULL; update_state_fb(c->primary); + c->state->plane_mask &= ~(1 << drm_plane_index(c->primary)); } } @@ -15272,13 +15389,9 @@ void intel_modeset_cleanup(struct drm_device *dev) */ drm_kms_helper_poll_fini(dev); - mutex_lock(&dev->struct_mutex); - intel_unregister_dsm_handler(); - intel_fbc_disable(dev); - - mutex_unlock(&dev->struct_mutex); + intel_fbc_disable(dev_priv); /* flush any delayed tasks or pending work */ flush_scheduled_work(); |