1 files changed, 126 insertions, 17 deletions

diff --git a/drivers/gpu/drm/i915/display/intel_psr.c b/drivers/gpu/drm/i915/display/intel_psr.c
index b3631b722de3..850cb7f5b332 100644
--- a/drivers/gpu/drm/i915/display/intel_psr.c
+++ b/drivers/gpu/drm/i915/display/intel_psr.c
@@ -28,9 +28,10 @@
 #include "i915_drv.h"
 #include "intel_atomic.h"
 #include "intel_display_types.h"
+#include "intel_dp_aux.h"
+#include "intel_hdmi.h"
 #include "intel_psr.h"
 #include "intel_sprite.h"
-#include "intel_hdmi.h"
 
 /**
  * DOC: Panel Self Refresh (PSR/SRD)
@@ -305,7 +306,7 @@ void intel_psr_init_dpcd(struct intel_dp *intel_dp)
 	drm_dbg_kms(&dev_priv->drm, "eDP panel supports PSR version %x\n",
 		    intel_dp->psr_dpcd[0]);
 
-	if (drm_dp_has_quirk(&intel_dp->desc, 0, DP_DPCD_QUIRK_NO_PSR)) {
+	if (drm_dp_has_quirk(&intel_dp->desc, DP_DPCD_QUIRK_NO_PSR)) {
 		drm_dbg_kms(&dev_priv->drm,
 			    "PSR support not currently available for this panel\n");
 		return;
@@ -811,6 +812,13 @@ void intel_psr_compute_config(struct intel_dp *intel_dp,
 		&crtc_state->hw.adjusted_mode;
 	int psr_setup_time;
 
+	/*
+	 * Current PSR panels dont work reliably with VRR enabled
+	 * So if VRR is enabled, do not enable PSR.
+	 */
+	if (crtc_state->vrr.enable)
+		return;
+
 	if (!CAN_PSR(dev_priv))
 		return;
 
@@ -1185,7 +1193,9 @@ void intel_psr2_program_plane_sel_fetch(struct intel_plane *plane,
 {
 	struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
 	enum pipe pipe = plane->pipe;
-	u32 val;
+	const struct drm_rect *clip;
+	u32 val, offset;
+	int ret, x, y;
 
 	if (!crtc_state->enable_psr2_sel_fetch)
 		return;
@@ -1196,16 +1206,25 @@ void intel_psr2_program_plane_sel_fetch(struct intel_plane *plane,
 	if (!val || plane->id == PLANE_CURSOR)
 		return;
 
-	val = plane_state->uapi.dst.y1 << 16 | plane_state->uapi.dst.x1;
+	clip = &plane_state->psr2_sel_fetch_area;
+
+	val = (clip->y1 + plane_state->uapi.dst.y1) << 16;
+	val |= plane_state->uapi.dst.x1;
 	intel_de_write_fw(dev_priv, PLANE_SEL_FETCH_POS(pipe, plane->id), val);
 
-	val = plane_state->color_plane[color_plane].y << 16;
-	val |= plane_state->color_plane[color_plane].x;
+	/* TODO: consider auxiliary surfaces */
+	x = plane_state->uapi.src.x1 >> 16;
+	y = (plane_state->uapi.src.y1 >> 16) + clip->y1;
+	ret = skl_calc_main_surface_offset(plane_state, &x, &y, &offset);
+	if (ret)
+		drm_warn_once(&dev_priv->drm, "skl_calc_main_surface_offset() returned %i\n",
+			      ret);
+	val = y << 16 | x;
 	intel_de_write_fw(dev_priv, PLANE_SEL_FETCH_OFFSET(pipe, plane->id),
 			  val);
 
 	/* Sizes are 0 based */
-	val = ((drm_rect_height(&plane_state->uapi.src) >> 16) - 1) << 16;
+	val = (drm_rect_height(clip) - 1) << 16;
 	val |= (drm_rect_width(&plane_state->uapi.src) >> 16) - 1;
 	intel_de_write_fw(dev_priv, PLANE_SEL_FETCH_SIZE(pipe, plane->id), val);
 }
@@ -1237,9 +1256,11 @@ static void psr2_man_trk_ctl_calc(struct intel_crtc_state *crtc_state,
 	if (clip->y1 == -1)
 		goto exit;
 
+	drm_WARN_ON(crtc_state->uapi.crtc->dev, clip->y1 % 4 || clip->y2 % 4);
+
 	val |= PSR2_MAN_TRK_CTL_SF_PARTIAL_FRAME_UPDATE;
 	val |= PSR2_MAN_TRK_CTL_SU_REGION_START_ADDR(clip->y1 / 4 + 1);
-	val |= PSR2_MAN_TRK_CTL_SU_REGION_END_ADDR(DIV_ROUND_UP(clip->y2, 4) + 1);
+	val |= PSR2_MAN_TRK_CTL_SU_REGION_END_ADDR(clip->y2 / 4 + 1);
 exit:
 	crtc_state->psr2_man_track_ctl = val;
 }
@@ -1264,8 +1285,8 @@ int intel_psr2_sel_fetch_update(struct intel_atomic_state *state,
 				struct intel_crtc *crtc)
 {
 	struct intel_crtc_state *crtc_state = intel_atomic_get_new_crtc_state(state, crtc);
+	struct drm_rect pipe_clip = { .x1 = 0, .y1 = -1, .x2 = INT_MAX, .y2 = -1 };
 	struct intel_plane_state *new_plane_state, *old_plane_state;
-	struct drm_rect pipe_clip = { .y1 = -1 };
 	struct intel_plane *plane;
 	bool full_update = false;
 	int i, ret;
@@ -1277,13 +1298,25 @@ int intel_psr2_sel_fetch_update(struct intel_atomic_state *state,
 	if (ret)
 		return ret;
 
+	/*
+	 * Calculate minimal selective fetch area of each plane and calculate
+	 * the pipe damaged area.
+	 * In the next loop the plane selective fetch area will actually be set
+	 * using whole pipe damaged area.
+	 */
 	for_each_oldnew_intel_plane_in_state(state, plane, old_plane_state,
 					     new_plane_state, i) {
-		struct drm_rect temp;
+		struct drm_rect src, damaged_area = { .y1 = -1 };
+		struct drm_mode_rect *damaged_clips;
+		u32 num_clips, j;
 
 		if (new_plane_state->uapi.crtc != crtc_state->uapi.crtc)
 			continue;
 
+		if (!new_plane_state->uapi.visible &&
+		    !old_plane_state->uapi.visible)
+			continue;
+
 		/*
 		 * TODO: Not clear how to handle planes with negative position,
 		 * also planes are not updated if they have a negative X
@@ -1295,18 +1328,94 @@ int intel_psr2_sel_fetch_update(struct intel_atomic_state *state,
 			break;
 		}
 
-		if (!new_plane_state->uapi.visible)
-			continue;
+		num_clips = drm_plane_get_damage_clips_count(&new_plane_state->uapi);
 
 		/*
-		 * For now doing a selective fetch in the whole plane area,
-		 * optimizations will come in the future.
+		 * If visibility or plane moved, mark the whole plane area as
+		 * damaged as it needs to be complete redraw in the new and old
+		 * position.
 		 */
-		temp.y1 = new_plane_state->uapi.dst.y1;
-		temp.y2 = new_plane_state->uapi.dst.y2;
-		clip_area_update(&pipe_clip, &temp);
+		if (new_plane_state->uapi.visible != old_plane_state->uapi.visible ||
+		    !drm_rect_equals(&new_plane_state->uapi.dst,
+				     &old_plane_state->uapi.dst)) {
+			if (old_plane_state->uapi.visible) {
+				damaged_area.y1 = old_plane_state->uapi.dst.y1;
+				damaged_area.y2 = old_plane_state->uapi.dst.y2;
+				clip_area_update(&pipe_clip, &damaged_area);
+			}
+
+			if (new_plane_state->uapi.visible) {
+				damaged_area.y1 = new_plane_state->uapi.dst.y1;
+				damaged_area.y2 = new_plane_state->uapi.dst.y2;
+				clip_area_update(&pipe_clip, &damaged_area);
+			}
+			continue;
+		} else if (new_plane_state->uapi.alpha != old_plane_state->uapi.alpha ||
+			   (!num_clips &&
+			    new_plane_state->uapi.fb != old_plane_state->uapi.fb)) {
+			/*
+			 * If the plane don't have damaged areas but the
+			 * framebuffer changed or alpha changed, mark the whole
+			 * plane area as damaged.
+			 */
+			damaged_area.y1 = new_plane_state->uapi.dst.y1;
+			damaged_area.y2 = new_plane_state->uapi.dst.y2;
+			clip_area_update(&pipe_clip, &damaged_area);
+			continue;
+		}
+
+		drm_rect_fp_to_int(&src, &new_plane_state->uapi.src);
+		damaged_clips = drm_plane_get_damage_clips(&new_plane_state->uapi);
+
+		for (j = 0; j < num_clips; j++) {
+			struct drm_rect clip;
+
+			clip.x1 = damaged_clips[j].x1;
+			clip.y1 = damaged_clips[j].y1;
+			clip.x2 = damaged_clips[j].x2;
+			clip.y2 = damaged_clips[j].y2;
+			if (drm_rect_intersect(&clip, &src))
+				clip_area_update(&damaged_area, &clip);
+		}
+
+		if (damaged_area.y1 == -1)
+			continue;
+
+		damaged_area.y1 += new_plane_state->uapi.dst.y1 - src.y1;
+		damaged_area.y2 += new_plane_state->uapi.dst.y1 - src.y1;
+		clip_area_update(&pipe_clip, &damaged_area);
+	}
+
+	if (full_update)
+		goto skip_sel_fetch_set_loop;
+
+	/* It must be aligned to 4 lines */
+	pipe_clip.y1 -= pipe_clip.y1 % 4;
+	if (pipe_clip.y2 % 4)
+		pipe_clip.y2 = ((pipe_clip.y2 / 4) + 1) * 4;
+
+	/*
+	 * Now that we have the pipe damaged area check if it intersect with
+	 * every plane, if it does set the plane selective fetch area.
+	 */
+	for_each_oldnew_intel_plane_in_state(state, plane, old_plane_state,
+					     new_plane_state, i) {
+		struct drm_rect *sel_fetch_area, inter;
+
+		if (new_plane_state->uapi.crtc != crtc_state->uapi.crtc ||
+		    !new_plane_state->uapi.visible)
+			continue;
+
+		inter = pipe_clip;
+		if (!drm_rect_intersect(&inter, &new_plane_state->uapi.dst))
+			continue;
+
+		sel_fetch_area = &new_plane_state->psr2_sel_fetch_area;
+		sel_fetch_area->y1 = inter.y1 - new_plane_state->uapi.dst.y1;
+		sel_fetch_area->y2 = inter.y2 - new_plane_state->uapi.dst.y1;
 	}
 
+skip_sel_fetch_set_loop:
 	psr2_man_trk_ctl_calc(crtc_state, &pipe_clip, full_update);
 	return 0;
 }