diff options
Diffstat (limited to 'drivers/gpu/drm/drm_connector.c')
| -rw-r--r-- | drivers/gpu/drm/drm_connector.c | 122 |
1 files changed, 115 insertions, 7 deletions
diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c index e6a21e69059c..b3cde897cd80 100644 --- a/drivers/gpu/drm/drm_connector.c +++ b/drivers/gpu/drm/drm_connector.c @@ -205,9 +205,14 @@ int drm_connector_init(struct drm_device *dev, connector->dev = dev; connector->funcs = funcs; - ret = ida_simple_get(&config->connector_ida, 0, 0, GFP_KERNEL); - if (ret < 0) + /* connector index is used with 32bit bitmasks */ + ret = ida_simple_get(&config->connector_ida, 0, 32, GFP_KERNEL); + if (ret < 0) { + DRM_DEBUG_KMS("Failed to allocate %s connector index: %d\n", + drm_connector_enum_list[connector_type].name, + ret); goto out_put; + } connector->index = ret; ret = 0; @@ -756,6 +761,13 @@ static const struct drm_prop_enum_list drm_tv_subconnector_enum_list[] = { DRM_ENUM_NAME_FN(drm_get_tv_subconnector_name, drm_tv_subconnector_enum_list) +static struct drm_prop_enum_list drm_cp_enum_list[] = { + { DRM_MODE_CONTENT_PROTECTION_UNDESIRED, "Undesired" }, + { DRM_MODE_CONTENT_PROTECTION_DESIRED, "Desired" }, + { DRM_MODE_CONTENT_PROTECTION_ENABLED, "Enabled" }, +}; +DRM_ENUM_NAME_FN(drm_get_content_protection_name, drm_cp_enum_list) + /** * DOC: standard connector properties * @@ -817,14 +829,50 @@ DRM_ENUM_NAME_FN(drm_get_tv_subconnector_name, * should update this value using drm_mode_connector_set_tile_property(). * Userspace cannot change this property. * link-status: - * Connector link-status property to indicate the status of link. The default - * value of link-status is "GOOD". If something fails during or after modeset, - * the kernel driver may set this to "BAD" and issue a hotplug uevent. Drivers - * should update this value using drm_mode_connector_set_link_status_property(). + * Connector link-status property to indicate the status of link. The + * default value of link-status is "GOOD". If something fails during or + * after modeset, the kernel driver may set this to "BAD" and issue a + * hotplug uevent. Drivers should update this value using + * drm_mode_connector_set_link_status_property(). * non_desktop: * Indicates the output should be ignored for purposes of displaying a * standard desktop environment or console. This is most likely because * the output device is not rectilinear. + * Content Protection: + * This property is used by userspace to request the kernel protect future + * content communicated over the link. When requested, kernel will apply + * the appropriate means of protection (most often HDCP), and use the + * property to tell userspace the protection is active. + * + * Drivers can set this up by calling + * drm_connector_attach_content_protection_property() on initialization. + * + * The value of this property can be one of the following: + * + * DRM_MODE_CONTENT_PROTECTION_UNDESIRED = 0 + * The link is not protected, content is transmitted in the clear. + * DRM_MODE_CONTENT_PROTECTION_DESIRED = 1 + * Userspace has requested content protection, but the link is not + * currently protected. When in this state, kernel should enable + * Content Protection as soon as possible. + * DRM_MODE_CONTENT_PROTECTION_ENABLED = 2 + * Userspace has requested content protection, and the link is + * protected. Only the driver can set the property to this value. + * If userspace attempts to set to ENABLED, kernel will return + * -EINVAL. + * + * A few guidelines: + * + * - DESIRED state should be preserved until userspace de-asserts it by + * setting the property to UNDESIRED. This means ENABLED should only + * transition to UNDESIRED when the user explicitly requests it. + * - If the state is DESIRED, kernel should attempt to re-authenticate the + * link whenever possible. This includes across disable/enable, dpms, + * hotplug, downstream device changes, link status failures, etc.. + * - Userspace is responsible for polling the property to determine when + * the value transitions from ENABLED to DESIRED. This signifies the link + * is no longer protected and userspace should take appropriate action + * (whatever that might be). * * Connectors also have one standardized atomic property: * @@ -841,7 +889,31 @@ DRM_ENUM_NAME_FN(drm_get_tv_subconnector_name, * INPUT_PROP_DIRECT) will still map 1:1 to the actual LCD panel * coordinates, so if userspace rotates the picture to adjust for * the orientation it must also apply the same transformation to the - * touchscreen input coordinates. + * touchscreen input coordinates. This property is initialized by calling + * drm_connector_init_panel_orientation_property(). + * + * scaling mode: + * This property defines how a non-native mode is upscaled to the native + * mode of an LCD panel: + * + * None: + * No upscaling happens, scaling is left to the panel. Not all + * drivers expose this mode. + * Full: + * The output is upscaled to the full resolution of the panel, + * ignoring the aspect ratio. + * Center: + * No upscaling happens, the output is centered within the native + * resolution the panel. + * Full aspect: + * The output is upscaled to maximize either the width or height + * while retaining the aspect ratio. + * + * This property should be set up by calling + * drm_connector_attach_scaling_mode_property(). Note that drivers + * can also expose this property to external outputs, in which case they + * must support "None", which should be the default (since external screens + * have a built-in scaler). */ int drm_connector_create_standard_properties(struct drm_device *dev) @@ -1126,6 +1198,42 @@ int drm_connector_attach_scaling_mode_property(struct drm_connector *connector, EXPORT_SYMBOL(drm_connector_attach_scaling_mode_property); /** + * drm_connector_attach_content_protection_property - attach content protection + * property + * + * @connector: connector to attach CP property on. + * + * This is used to add support for content protection on select connectors. + * Content Protection is intentionally vague to allow for different underlying + * technologies, however it is most implemented by HDCP. + * + * The content protection will be set to &drm_connector_state.content_protection + * + * Returns: + * Zero on success, negative errno on failure. + */ +int drm_connector_attach_content_protection_property( + struct drm_connector *connector) +{ + struct drm_device *dev = connector->dev; + struct drm_property *prop; + + prop = drm_property_create_enum(dev, 0, "Content Protection", + drm_cp_enum_list, + ARRAY_SIZE(drm_cp_enum_list)); + if (!prop) + return -ENOMEM; + + drm_object_attach_property(&connector->base, prop, + DRM_MODE_CONTENT_PROTECTION_UNDESIRED); + + connector->content_protection_property = prop; + + return 0; +} +EXPORT_SYMBOL(drm_connector_attach_content_protection_property); + +/** * drm_mode_create_aspect_ratio_property - create aspect ratio property * @dev: DRM device * |