diff options
Diffstat (limited to 'drivers/gpu/drm/display/drm_scdc_helper.c')
| -rw-r--r-- | drivers/gpu/drm/display/drm_scdc_helper.c | 250 |
1 files changed, 250 insertions, 0 deletions
diff --git a/drivers/gpu/drm/display/drm_scdc_helper.c b/drivers/gpu/drm/display/drm_scdc_helper.c new file mode 100644 index 000000000000..81881e81ceae --- /dev/null +++ b/drivers/gpu/drm/display/drm_scdc_helper.c @@ -0,0 +1,250 @@ +/* + * Copyright (c) 2015 NVIDIA Corporation. All rights reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sub license, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial portions + * of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + */ + +#include <linux/i2c.h> +#include <linux/slab.h> +#include <linux/delay.h> + +#include <drm/display/drm_scdc_helper.h> +#include <drm/drm_print.h> + +/** + * DOC: scdc helpers + * + * Status and Control Data Channel (SCDC) is a mechanism introduced by the + * HDMI 2.0 specification. It is a point-to-point protocol that allows the + * HDMI source and HDMI sink to exchange data. The same I2C interface that + * is used to access EDID serves as the transport mechanism for SCDC. + */ + +#define SCDC_I2C_SLAVE_ADDRESS 0x54 + +/** + * drm_scdc_read - read a block of data from SCDC + * @adapter: I2C controller + * @offset: start offset of block to read + * @buffer: return location for the block to read + * @size: size of the block to read + * + * Reads a block of data from SCDC, starting at a given offset. + * + * Returns: + * 0 on success, negative error code on failure. + */ +ssize_t drm_scdc_read(struct i2c_adapter *adapter, u8 offset, void *buffer, + size_t size) +{ + int ret; + struct i2c_msg msgs[2] = { + { + .addr = SCDC_I2C_SLAVE_ADDRESS, + .flags = 0, + .len = 1, + .buf = &offset, + }, { + .addr = SCDC_I2C_SLAVE_ADDRESS, + .flags = I2C_M_RD, + .len = size, + .buf = buffer, + } + }; + + ret = i2c_transfer(adapter, msgs, ARRAY_SIZE(msgs)); + if (ret < 0) + return ret; + if (ret != ARRAY_SIZE(msgs)) + return -EPROTO; + + return 0; +} +EXPORT_SYMBOL(drm_scdc_read); + +/** + * drm_scdc_write - write a block of data to SCDC + * @adapter: I2C controller + * @offset: start offset of block to write + * @buffer: block of data to write + * @size: size of the block to write + * + * Writes a block of data to SCDC, starting at a given offset. + * + * Returns: + * 0 on success, negative error code on failure. + */ +ssize_t drm_scdc_write(struct i2c_adapter *adapter, u8 offset, + const void *buffer, size_t size) +{ + struct i2c_msg msg = { + .addr = SCDC_I2C_SLAVE_ADDRESS, + .flags = 0, + .len = 1 + size, + .buf = NULL, + }; + void *data; + int err; + + data = kmalloc(1 + size, GFP_KERNEL); + if (!data) + return -ENOMEM; + + msg.buf = data; + + memcpy(data, &offset, sizeof(offset)); + memcpy(data + 1, buffer, size); + + err = i2c_transfer(adapter, &msg, 1); + + kfree(data); + + if (err < 0) + return err; + if (err != 1) + return -EPROTO; + + return 0; +} +EXPORT_SYMBOL(drm_scdc_write); + +/** + * drm_scdc_get_scrambling_status - what is status of scrambling? + * @adapter: I2C adapter for DDC channel + * + * Reads the scrambler status over SCDC, and checks the + * scrambling status. + * + * Returns: + * True if the scrambling is enabled, false otherwise. + */ +bool drm_scdc_get_scrambling_status(struct i2c_adapter *adapter) +{ + u8 status; + int ret; + + ret = drm_scdc_readb(adapter, SCDC_SCRAMBLER_STATUS, &status); + if (ret < 0) { + DRM_DEBUG_KMS("Failed to read scrambling status: %d\n", ret); + return false; + } + + return status & SCDC_SCRAMBLING_STATUS; +} +EXPORT_SYMBOL(drm_scdc_get_scrambling_status); + +/** + * drm_scdc_set_scrambling - enable scrambling + * @adapter: I2C adapter for DDC channel + * @enable: bool to indicate if scrambling is to be enabled/disabled + * + * Writes the TMDS config register over SCDC channel, and: + * enables scrambling when enable = 1 + * disables scrambling when enable = 0 + * + * Returns: + * True if scrambling is set/reset successfully, false otherwise. + */ +bool drm_scdc_set_scrambling(struct i2c_adapter *adapter, bool enable) +{ + u8 config; + int ret; + + ret = drm_scdc_readb(adapter, SCDC_TMDS_CONFIG, &config); + if (ret < 0) { + DRM_DEBUG_KMS("Failed to read TMDS config: %d\n", ret); + return false; + } + + if (enable) + config |= SCDC_SCRAMBLING_ENABLE; + else + config &= ~SCDC_SCRAMBLING_ENABLE; + + ret = drm_scdc_writeb(adapter, SCDC_TMDS_CONFIG, config); + if (ret < 0) { + DRM_DEBUG_KMS("Failed to enable scrambling: %d\n", ret); + return false; + } + + return true; +} +EXPORT_SYMBOL(drm_scdc_set_scrambling); + +/** + * drm_scdc_set_high_tmds_clock_ratio - set TMDS clock ratio + * @adapter: I2C adapter for DDC channel + * @set: ret or reset the high clock ratio + * + * + * TMDS clock ratio calculations go like this: + * TMDS character = 10 bit TMDS encoded value + * + * TMDS character rate = The rate at which TMDS characters are + * transmitted (Mcsc) + * + * TMDS bit rate = 10x TMDS character rate + * + * As per the spec: + * TMDS clock rate for pixel clock < 340 MHz = 1x the character + * rate = 1/10 pixel clock rate + * + * TMDS clock rate for pixel clock > 340 MHz = 0.25x the character + * rate = 1/40 pixel clock rate + * + * Writes to the TMDS config register over SCDC channel, and: + * sets TMDS clock ratio to 1/40 when set = 1 + * + * sets TMDS clock ratio to 1/10 when set = 0 + * + * Returns: + * True if write is successful, false otherwise. + */ +bool drm_scdc_set_high_tmds_clock_ratio(struct i2c_adapter *adapter, bool set) +{ + u8 config; + int ret; + + ret = drm_scdc_readb(adapter, SCDC_TMDS_CONFIG, &config); + if (ret < 0) { + DRM_DEBUG_KMS("Failed to read TMDS config: %d\n", ret); + return false; + } + + if (set) + config |= SCDC_TMDS_BIT_CLOCK_RATIO_BY_40; + else + config &= ~SCDC_TMDS_BIT_CLOCK_RATIO_BY_40; + + ret = drm_scdc_writeb(adapter, SCDC_TMDS_CONFIG, config); + if (ret < 0) { + DRM_DEBUG_KMS("Failed to set TMDS clock ratio: %d\n", ret); + return false; + } + + /* + * The spec says that a source should wait minimum 1ms and maximum + * 100ms after writing the TMDS config for clock ratio. Lets allow a + * wait of up to 2ms here. + */ + usleep_range(1000, 2000); + return true; +} +EXPORT_SYMBOL(drm_scdc_set_high_tmds_clock_ratio); |