diff options
Diffstat (limited to 'drivers/gpu/drm/display/drm_dp_helper.c')
| -rw-r--r-- | drivers/gpu/drm/display/drm_dp_helper.c | 48 |
1 files changed, 47 insertions, 1 deletions
diff --git a/drivers/gpu/drm/display/drm_dp_helper.c b/drivers/gpu/drm/display/drm_dp_helper.c index 266826eac4a7..79a615667aab 100644 --- a/drivers/gpu/drm/display/drm_dp_helper.c +++ b/drivers/gpu/drm/display/drm_dp_helper.c @@ -2113,7 +2113,7 @@ EXPORT_SYMBOL(drm_dp_aux_init); * drm_dp_aux_register() in &drm_connector_funcs.late_register, and likewise to * call drm_dp_aux_unregister() in &drm_connector_funcs.early_unregister. * Functions which don't follow this will likely Oops when - * %CONFIG_DRM_DP_AUX_CHARDEV is enabled. + * %CONFIG_DRM_DISPLAY_DP_AUX_CHARDEV is enabled. * * For devices where the AUX channel is a device that exists independently of * the &drm_device that uses it, such as SoCs and bridge devices, it is @@ -2281,6 +2281,8 @@ static const struct dpcd_quirk dpcd_quirk_list[] = { { OUI(0x90, 0xCC, 0x24), DEVICE_ID_ANY, true, BIT(DP_DPCD_QUIRK_DSC_WITHOUT_VIRTUAL_DPCD) }, /* Synaptics DP1.4 MST hubs require DSC for some modes on which it applies HBLANK expansion. */ { OUI(0x90, 0xCC, 0x24), DEVICE_ID_ANY, true, BIT(DP_DPCD_QUIRK_HBLANK_EXPANSION_REQUIRES_DSC) }, + /* MediaTek panels (at least in U3224KBA) require DSC for modes with a short HBLANK on UHBR links. */ + { OUI(0x00, 0x0C, 0xE7), DEVICE_ID_ANY, false, BIT(DP_DPCD_QUIRK_HBLANK_EXPANSION_REQUIRES_DSC) }, /* Apple MacBookPro 2017 15 inch eDP Retina panel reports too low DP_MAX_LINK_RATE */ { OUI(0x00, 0x10, 0xfa), DEVICE_ID(101, 68, 21, 101, 98, 97), false, BIT(DP_DPCD_QUIRK_CAN_DO_MAX_LINK_RATE_3_24_GBPS) }, }; @@ -2948,6 +2950,43 @@ void drm_dp_vsc_sdp_log(struct drm_printer *p, const struct drm_dp_vsc_sdp *vsc) } EXPORT_SYMBOL(drm_dp_vsc_sdp_log); +void drm_dp_as_sdp_log(struct drm_printer *p, const struct drm_dp_as_sdp *as_sdp) +{ + drm_printf(p, "DP SDP: AS_SDP, revision %u, length %u\n", + as_sdp->revision, as_sdp->length); + drm_printf(p, " vtotal: %d\n", as_sdp->vtotal); + drm_printf(p, " target_rr: %d\n", as_sdp->target_rr); + drm_printf(p, " duration_incr_ms: %d\n", as_sdp->duration_incr_ms); + drm_printf(p, " duration_decr_ms: %d\n", as_sdp->duration_decr_ms); + drm_printf(p, " operation_mode: %d\n", as_sdp->mode); +} +EXPORT_SYMBOL(drm_dp_as_sdp_log); + +/** + * drm_dp_as_sdp_supported() - check if adaptive sync sdp is supported + * @aux: DisplayPort AUX channel + * @dpcd: DisplayPort configuration data + * + * Returns true if adaptive sync sdp is supported, else returns false + */ +bool drm_dp_as_sdp_supported(struct drm_dp_aux *aux, const u8 dpcd[DP_RECEIVER_CAP_SIZE]) +{ + u8 rx_feature; + + if (dpcd[DP_DPCD_REV] < DP_DPCD_REV_13) + return false; + + if (drm_dp_dpcd_readb(aux, DP_DPRX_FEATURE_ENUMERATION_LIST_CONT_1, + &rx_feature) != 1) { + drm_dbg_dp(aux->drm_dev, + "Failed to read DP_DPRX_FEATURE_ENUMERATION_LIST_CONT_1\n"); + return false; + } + + return (rx_feature & DP_ADAPTIVE_SYNC_SDP_SUPPORTED); +} +EXPORT_SYMBOL(drm_dp_as_sdp_supported); + /** * drm_dp_vsc_sdp_supported() - check if vsc sdp is supported * @aux: DisplayPort AUX channel @@ -4111,6 +4150,13 @@ int drm_dp_bw_overhead(int lane_count, int hactive, u32 overhead = 1000000; int symbol_cycles; + if (lane_count == 0 || hactive == 0 || bpp_x16 == 0) { + DRM_DEBUG_KMS("Invalid BW overhead params: lane_count %d, hactive %d, bpp_x16 %d.%04d\n", + lane_count, hactive, + bpp_x16 >> 4, (bpp_x16 & 0xf) * 625); + return 0; + } + /* * DP Standard v2.1 2.6.4.1 * SSC downspread and ref clock variation margin: |