diff options
Diffstat (limited to 'drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c')
-rw-r--r-- | drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 217 |
1 files changed, 150 insertions, 67 deletions
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c index 6cc6e3991410..c512f70b8272 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c @@ -115,9 +115,10 @@ * 3.54.0 - Add AMDGPU_CTX_QUERY2_FLAGS_RESET_IN_PROGRESS support * - 3.55.0 - Add AMDGPU_INFO_GPUVM_FAULT query * - 3.56.0 - Update IB start address and size alignment for decode and encode + * - 3.57.0 - Compute tunneling on GFX10+ */ #define KMS_DRIVER_MAJOR 3 -#define KMS_DRIVER_MINOR 56 +#define KMS_DRIVER_MINOR 57 #define KMS_DRIVER_PATCHLEVEL 0 /* @@ -127,6 +128,7 @@ enum AMDGPU_DEBUG_MASK { AMDGPU_DEBUG_VM = BIT(0), AMDGPU_DEBUG_LARGEBAR = BIT(1), AMDGPU_DEBUG_DISABLE_GPU_SOFT_RECOVERY = BIT(2), + AMDGPU_DEBUG_USE_VRAM_FW_BUF = BIT(3), }; unsigned int amdgpu_vram_limit = UINT_MAX; @@ -193,10 +195,12 @@ int amdgpu_async_gfx_ring = 1; int amdgpu_mcbp = -1; int amdgpu_discovery = -1; int amdgpu_mes; +int amdgpu_mes_log_enable = 0; int amdgpu_mes_kiq; int amdgpu_noretry = -1; int amdgpu_force_asic_type = -1; int amdgpu_tmz = -1; /* auto */ +uint amdgpu_freesync_vid_mode; int amdgpu_reset_method = -1; /* auto */ int amdgpu_num_kcq = -1; int amdgpu_smartshift_bias; @@ -207,6 +211,9 @@ int amdgpu_user_partt_mode = AMDGPU_AUTO_COMPUTE_PARTITION_MODE; int amdgpu_umsch_mm; int amdgpu_seamless = -1; /* auto */ uint amdgpu_debug_mask; +int amdgpu_agp = -1; /* auto */ +int amdgpu_wbrf = -1; +int amdgpu_damage_clips = -1; /* auto */ static void amdgpu_drv_delayed_reset_work_handler(struct work_struct *work); @@ -362,7 +369,7 @@ module_param_named(aspm, amdgpu_aspm, int, 0444); * Setting the value to 0 disables this functionality. * Setting the value to -2 is auto enabled with power down when displays are attached. */ -MODULE_PARM_DESC(runpm, "PX runtime pm (2 = force enable with BAMACO, 1 = force enable with BACO, 0 = disable, -1 = auto, -2 = autowith displays)"); +MODULE_PARM_DESC(runpm, "PX runtime pm (2 = force enable with BAMACO, 1 = force enable with BACO, 0 = disable, -1 = auto, -2 = auto with displays)"); module_param_named(runpm, amdgpu_runtime_pm, int, 0444); /** @@ -589,7 +596,7 @@ module_param_named(timeout_period, amdgpu_watchdog_timer.period, uint, 0644); #ifdef CONFIG_DRM_AMDGPU_SI #if IS_ENABLED(CONFIG_DRM_RADEON) || IS_ENABLED(CONFIG_DRM_RADEON_MODULE) -int amdgpu_si_support = 0; +int amdgpu_si_support; MODULE_PARM_DESC(si_support, "SI support (1 = enabled, 0 = disabled (default))"); #else int amdgpu_si_support = 1; @@ -608,7 +615,7 @@ module_param_named(si_support, amdgpu_si_support, int, 0444); #ifdef CONFIG_DRM_AMDGPU_CIK #if IS_ENABLED(CONFIG_DRM_RADEON) || IS_ENABLED(CONFIG_DRM_RADEON_MODULE) -int amdgpu_cik_support = 0; +int amdgpu_cik_support; MODULE_PARM_DESC(cik_support, "CIK support (1 = enabled, 0 = disabled (default))"); #else int amdgpu_cik_support = 1; @@ -662,6 +669,15 @@ MODULE_PARM_DESC(mes, module_param_named(mes, amdgpu_mes, int, 0444); /** + * DOC: mes_log_enable (int) + * Enable Micro Engine Scheduler log. This is used to enable/disable MES internal log. + * (0 = disabled (default), 1 = enabled) + */ +MODULE_PARM_DESC(mes_log_enable, + "Enable Micro Engine Scheduler log (0 = disabled (default), 1 = enabled)"); +module_param_named(mes_log_enable, amdgpu_mes_log_enable, int, 0444); + +/** * DOC: mes_kiq (int) * Enable Micro Engine Scheduler KIQ. This is a new engine pipe for kiq. * (0 = disabled (default), 1 = enabled) @@ -844,18 +860,31 @@ module_param_named(visualconfirm, amdgpu_dc_visual_confirm, uint, 0444); * the ABM algorithm, with 1 being the least reduction and 4 being the most * reduction. * - * Defaults to 0, or disabled. Userspace can still override this level later - * after boot. + * Defaults to -1, or disabled. Userspace can only override this level after + * boot if it's set to auto. */ -uint amdgpu_dm_abm_level; -MODULE_PARM_DESC(abmlevel, "ABM level (0 = off (default), 1-4 = backlight reduction level) "); -module_param_named(abmlevel, amdgpu_dm_abm_level, uint, 0444); +int amdgpu_dm_abm_level = -1; +MODULE_PARM_DESC(abmlevel, + "ABM level (0 = off, 1-4 = backlight reduction level, -1 auto (default))"); +module_param_named(abmlevel, amdgpu_dm_abm_level, int, 0444); int amdgpu_backlight = -1; MODULE_PARM_DESC(backlight, "Backlight control (0 = pwm, 1 = aux, -1 auto (default))"); module_param_named(backlight, amdgpu_backlight, bint, 0444); /** + * DOC: damageclips (int) + * Enable or disable damage clips support. If damage clips support is disabled, + * we will force full frame updates, irrespective of what user space sends to + * us. + * + * Defaults to -1 (where it is enabled unless a PSR-SU display is detected). + */ +MODULE_PARM_DESC(damageclips, + "Damage clips support (0 = disable, 1 = enable, -1 auto (default))"); +module_param_named(damageclips, amdgpu_damage_clips, int, 0444); + +/** * DOC: tmz (int) * Trusted Memory Zone (TMZ) is a method to protect data being written * to or read from memory. @@ -866,6 +895,32 @@ MODULE_PARM_DESC(tmz, "Enable TMZ feature (-1 = auto (default), 0 = off, 1 = on) module_param_named(tmz, amdgpu_tmz, int, 0444); /** + * DOC: freesync_video (uint) + * Enable the optimization to adjust front porch timing to achieve seamless + * mode change experience when setting a freesync supported mode for which full + * modeset is not needed. + * + * The Display Core will add a set of modes derived from the base FreeSync + * video mode into the corresponding connector's mode list based on commonly + * used refresh rates and VRR range of the connected display, when users enable + * this feature. From the userspace perspective, they can see a seamless mode + * change experience when the change between different refresh rates under the + * same resolution. Additionally, userspace applications such as Video playback + * can read this modeset list and change the refresh rate based on the video + * frame rate. Finally, the userspace can also derive an appropriate mode for a + * particular refresh rate based on the FreeSync Mode and add it to the + * connector's mode list. + * + * Note: This is an experimental feature. + * + * The default value: 0 (off). + */ +MODULE_PARM_DESC( + freesync_video, + "Enable freesync modesetting optimization feature (0 = off (default), 1 = on)"); +module_param_named(freesync_video, amdgpu_freesync_vid_mode, uint, 0444); + +/** * DOC: reset_method (int) * GPU reset method (-1 = auto (default), 0 = legacy, 1 = mode0, 2 = mode1, 3 = mode2, 4 = baco) */ @@ -961,6 +1016,31 @@ module_param_named(seamless, amdgpu_seamless, int, 0444); MODULE_PARM_DESC(debug_mask, "debug options for amdgpu, disabled by default"); module_param_named(debug_mask, amdgpu_debug_mask, uint, 0444); +/** + * DOC: agp (int) + * Enable the AGP aperture. This provides an aperture in the GPU's internal + * address space for direct access to system memory. Note that these accesses + * are non-snooped, so they are only used for access to uncached memory. + */ +MODULE_PARM_DESC(agp, "AGP (-1 = auto (default), 0 = disable, 1 = enable)"); +module_param_named(agp, amdgpu_agp, int, 0444); + +/** + * DOC: wbrf (int) + * Enable Wifi RFI interference mitigation feature. + * Due to electrical and mechanical constraints there may be likely interference of + * relatively high-powered harmonics of the (G-)DDR memory clocks with local radio + * module frequency bands used by Wifi 6/6e/7. To mitigate the possible RFI interference, + * with this feature enabled, PMFW will use either “shadowed P-State” or “P-State” based + * on active list of frequencies in-use (to be avoided) as part of initial setting or + * P-state transition. However, there may be potential performance impact with this + * feature enabled. + * (0 = disabled, 1 = enabled, -1 = auto (default setting, will be enabled if supported)) + */ +MODULE_PARM_DESC(wbrf, + "Enable Wifi RFI interference mitigation (0 = disabled, 1 = enabled, -1 = auto(default)"); +module_param_named(wbrf, amdgpu_wbrf, int, 0444); + /* These devices are not supported by amdgpu. * They are supported by the mach64, r128, radeon drivers */ @@ -2041,6 +2121,14 @@ static const struct pci_device_id pciidlist[] = { MODULE_DEVICE_TABLE(pci, pciidlist); +static const struct amdgpu_asic_type_quirk asic_type_quirks[] = { + /* differentiate between P10 and P11 asics with the same DID */ + {0x67FF, 0xE3, CHIP_POLARIS10}, + {0x67FF, 0xE7, CHIP_POLARIS10}, + {0x67FF, 0xF3, CHIP_POLARIS10}, + {0x67FF, 0xF7, CHIP_POLARIS10}, +}; + static const struct drm_driver amdgpu_kms_driver; static void amdgpu_get_secondary_funcs(struct amdgpu_device *adev) @@ -2081,6 +2169,27 @@ static void amdgpu_init_debug_options(struct amdgpu_device *adev) pr_info("debug: soft reset for GPU recovery disabled\n"); adev->debug_disable_soft_recovery = true; } + + if (amdgpu_debug_mask & AMDGPU_DEBUG_USE_VRAM_FW_BUF) { + pr_info("debug: place fw in vram for frontdoor loading\n"); + adev->debug_use_vram_fw_buf = true; + } +} + +static unsigned long amdgpu_fix_asic_type(struct pci_dev *pdev, unsigned long flags) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(asic_type_quirks); i++) { + if (pdev->device == asic_type_quirks[i].device && + pdev->revision == asic_type_quirks[i].revision) { + flags &= ~AMD_ASIC_MASK; + flags |= asic_type_quirks[i].type; + break; + } + } + + return flags; } static int amdgpu_pci_probe(struct pci_dev *pdev, @@ -2110,15 +2219,8 @@ static int amdgpu_pci_probe(struct pci_dev *pdev, "See modparam exp_hw_support\n"); return -ENODEV; } - /* differentiate between P10 and P11 asics with the same DID */ - if (pdev->device == 0x67FF && - (pdev->revision == 0xE3 || - pdev->revision == 0xE7 || - pdev->revision == 0xF3 || - pdev->revision == 0xF7)) { - flags &= ~AMD_ASIC_MASK; - flags |= CHIP_POLARIS10; - } + + flags = amdgpu_fix_asic_type(pdev, flags); /* Due to hardware bugs, S/G Display on raven requires a 1:1 IOMMU mapping, * however, SME requires an indirect IOMMU mapping because the encryption @@ -2183,6 +2285,8 @@ static int amdgpu_pci_probe(struct pci_dev *pdev, pci_set_drvdata(pdev, ddev); + amdgpu_init_debug_options(adev); + ret = amdgpu_driver_load_kms(adev, flags); if (ret) goto err_pci; @@ -2202,6 +2306,10 @@ retry_init: if (ret) goto err_pci; + ret = amdgpu_amdkfd_drm_client_create(adev); + if (ret) + goto err_pci; + /* * 1. don't init fbdev on hw without DCE * 2. don't init fbdev if there are no connectors @@ -2236,6 +2344,8 @@ retry_init: pm_runtime_mark_last_busy(ddev->dev); pm_runtime_put_autosuspend(ddev->dev); + pci_wake_from_d3(pdev, TRUE); + /* * For runpm implemented via BACO, PMFW will handle the * timing for BACO in and out: @@ -2261,8 +2371,6 @@ retry_init: amdgpu_get_secondary_funcs(adev); } - amdgpu_init_debug_options(adev); - return 0; err_pci: @@ -2284,38 +2392,6 @@ amdgpu_pci_remove(struct pci_dev *pdev) pm_runtime_forbid(dev->dev); } - if (amdgpu_ip_version(adev, MP1_HWIP, 0) == IP_VERSION(13, 0, 2) && - !amdgpu_sriov_vf(adev)) { - bool need_to_reset_gpu = false; - - if (adev->gmc.xgmi.num_physical_nodes > 1) { - struct amdgpu_hive_info *hive; - - hive = amdgpu_get_xgmi_hive(adev); - if (hive->device_remove_count == 0) - need_to_reset_gpu = true; - hive->device_remove_count++; - amdgpu_put_xgmi_hive(hive); - } else { - need_to_reset_gpu = true; - } - - /* Workaround for ASICs need to reset SMU. - * Called only when the first device is removed. - */ - if (need_to_reset_gpu) { - struct amdgpu_reset_context reset_context; - - adev->shutdown = true; - memset(&reset_context, 0, sizeof(reset_context)); - reset_context.method = AMD_RESET_METHOD_NONE; - reset_context.reset_req_dev = adev; - set_bit(AMDGPU_NEED_FULL_RESET, &reset_context.flags); - set_bit(AMDGPU_RESET_FOR_DEVICE_REMOVE, &reset_context.flags); - amdgpu_device_gpu_recover(adev, NULL, &reset_context); - } - } - amdgpu_driver_unload_kms(dev); /* @@ -2405,6 +2481,7 @@ static void amdgpu_drv_delayed_reset_work_handler(struct work_struct *work) /* Use a common context, just need to make sure full reset is done */ set_bit(AMDGPU_SKIP_HW_RESET, &reset_context.flags); + set_bit(AMDGPU_SKIP_COREDUMP, &reset_context.flags); r = amdgpu_do_asic_reset(&device_list, &reset_context); if (r) { @@ -2413,8 +2490,11 @@ static void amdgpu_drv_delayed_reset_work_handler(struct work_struct *work) } for (i = 0; i < mgpu_info.num_dgpu; i++) { adev = mgpu_info.gpu_ins[i].adev; - if (!adev->kfd.init_complete) + if (!adev->kfd.init_complete) { + kgd2kfd_init_zone_device(adev); amdgpu_amdkfd_device_init(adev); + amdgpu_amdkfd_drm_client_create(adev); + } amdgpu_ttm_set_buffer_funcs_status(adev, true); } } @@ -2451,6 +2531,7 @@ static int amdgpu_pmops_suspend(struct device *dev) struct drm_device *drm_dev = dev_get_drvdata(dev); struct amdgpu_device *adev = drm_to_adev(drm_dev); + adev->suspend_complete = false; if (amdgpu_acpi_is_s0ix_active(adev)) adev->in_s0ix = true; else if (amdgpu_acpi_is_s3_active(adev)) @@ -2465,6 +2546,7 @@ static int amdgpu_pmops_suspend_noirq(struct device *dev) struct drm_device *drm_dev = dev_get_drvdata(dev); struct amdgpu_device *adev = drm_to_adev(drm_dev); + adev->suspend_complete = true; if (amdgpu_acpi_should_gpu_reset(adev)) return amdgpu_asic_reset(adev); @@ -2625,7 +2707,7 @@ static int amdgpu_pmops_runtime_suspend(struct device *dev) } adev->in_runpm = true; - if (amdgpu_device_supports_px(drm_dev)) + if (adev->pm.rpm_mode == AMDGPU_RUNPM_PX) drm_dev->switch_power_state = DRM_SWITCH_POWER_CHANGING; /* @@ -2635,7 +2717,7 @@ static int amdgpu_pmops_runtime_suspend(struct device *dev) * platforms. * TODO: this may be also needed for PX capable platform. */ - if (amdgpu_device_supports_boco(drm_dev)) + if (adev->pm.rpm_mode == AMDGPU_RUNPM_BOCO) adev->mp1_state = PP_MP1_STATE_UNLOAD; ret = amdgpu_device_prepare(drm_dev); @@ -2644,15 +2726,15 @@ static int amdgpu_pmops_runtime_suspend(struct device *dev) ret = amdgpu_device_suspend(drm_dev, false); if (ret) { adev->in_runpm = false; - if (amdgpu_device_supports_boco(drm_dev)) + if (adev->pm.rpm_mode == AMDGPU_RUNPM_BOCO) adev->mp1_state = PP_MP1_STATE_NONE; return ret; } - if (amdgpu_device_supports_boco(drm_dev)) + if (adev->pm.rpm_mode == AMDGPU_RUNPM_BOCO) adev->mp1_state = PP_MP1_STATE_NONE; - if (amdgpu_device_supports_px(drm_dev)) { + if (adev->pm.rpm_mode == AMDGPU_RUNPM_PX) { /* Only need to handle PCI state in the driver for ATPX * PCI core handles it for _PR3. */ @@ -2661,9 +2743,10 @@ static int amdgpu_pmops_runtime_suspend(struct device *dev) pci_ignore_hotplug(pdev); pci_set_power_state(pdev, PCI_D3cold); drm_dev->switch_power_state = DRM_SWITCH_POWER_DYNAMIC_OFF; - } else if (amdgpu_device_supports_boco(drm_dev)) { + } else if (adev->pm.rpm_mode == AMDGPU_RUNPM_BOCO) { /* nothing to do */ - } else if (amdgpu_device_supports_baco(drm_dev)) { + } else if ((adev->pm.rpm_mode == AMDGPU_RUNPM_BACO) || + (adev->pm.rpm_mode == AMDGPU_RUNPM_BAMACO)) { amdgpu_device_baco_enter(drm_dev); } @@ -2686,7 +2769,7 @@ static int amdgpu_pmops_runtime_resume(struct device *dev) if (!pci_device_is_present(adev->pdev)) adev->no_hw_access = true; - if (amdgpu_device_supports_px(drm_dev)) { + if (adev->pm.rpm_mode == AMDGPU_RUNPM_PX) { drm_dev->switch_power_state = DRM_SWITCH_POWER_CHANGING; /* Only need to handle PCI state in the driver for ATPX @@ -2698,22 +2781,23 @@ static int amdgpu_pmops_runtime_resume(struct device *dev) if (ret) return ret; pci_set_master(pdev); - } else if (amdgpu_device_supports_boco(drm_dev)) { + } else if (adev->pm.rpm_mode == AMDGPU_RUNPM_BOCO) { /* Only need to handle PCI state in the driver for ATPX * PCI core handles it for _PR3. */ pci_set_master(pdev); - } else if (amdgpu_device_supports_baco(drm_dev)) { + } else if ((adev->pm.rpm_mode == AMDGPU_RUNPM_BACO) || + (adev->pm.rpm_mode == AMDGPU_RUNPM_BAMACO)) { amdgpu_device_baco_exit(drm_dev); } ret = amdgpu_device_resume(drm_dev, false); if (ret) { - if (amdgpu_device_supports_px(drm_dev)) + if (adev->pm.rpm_mode == AMDGPU_RUNPM_PX) pci_disable_device(pdev); return ret; } - if (amdgpu_device_supports_px(drm_dev)) + if (adev->pm.rpm_mode == AMDGPU_RUNPM_PX) drm_dev->switch_power_state = DRM_SWITCH_POWER_ON; adev->in_runpm = false; return 0; @@ -2723,8 +2807,7 @@ static int amdgpu_pmops_runtime_idle(struct device *dev) { struct drm_device *drm_dev = dev_get_drvdata(dev); struct amdgpu_device *adev = drm_to_adev(drm_dev); - /* we don't want the main rpm_idle to call suspend - we want to autosuspend */ - int ret = 1; + int ret; if (adev->pm.rpm_mode == AMDGPU_RUNPM_NONE) { pm_runtime_forbid(dev); |