diff options
Diffstat (limited to 'drivers/gpio')
| -rw-r--r-- | drivers/gpio/Kconfig | 11 | ||||
| -rw-r--r-- | drivers/gpio/Makefile | 1 | ||||
| -rw-r--r-- | drivers/gpio/gpio-msc313.c | 460 |
3 files changed, 472 insertions, 0 deletions
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 4dd566f7ea39..2985e7475d3a 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -738,6 +738,17 @@ config GPIO_AMD_FCH Note: This driver doesn't registers itself automatically, as it needs to be provided with platform specific configuration. (See eg. CONFIG_PCENGINES_APU2.) + +config GPIO_MSC313 + bool "MStar MSC313 GPIO support" + depends on ARCH_MSTARV7 + default ARCH_MSTARV7 + select GPIOLIB_IRQCHIP + select IRQ_DOMAIN_HIERARCHY + help + Say Y here to support the main GPIO block on MStar/SigmaStar + ARMv7 based SoCs. + endmenu menu "Port-mapped I/O GPIO drivers" diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 09dada80ac34..b6c116a7c785 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -101,6 +101,7 @@ obj-$(CONFIG_GPIO_MOCKUP) += gpio-mockup.o obj-$(CONFIG_GPIO_MOXTET) += gpio-moxtet.o obj-$(CONFIG_GPIO_MPC5200) += gpio-mpc5200.o obj-$(CONFIG_GPIO_MPC8XXX) += gpio-mpc8xxx.o +obj-$(CONFIG_GPIO_MSC313) += gpio-msc313.o obj-$(CONFIG_GPIO_MSIC) += gpio-msic.o obj-$(CONFIG_GPIO_MT7621) += gpio-mt7621.o obj-$(CONFIG_GPIO_MVEBU) += gpio-mvebu.o diff --git a/drivers/gpio/gpio-msc313.c b/drivers/gpio/gpio-msc313.c new file mode 100644 index 000000000000..da31a5ff7a2b --- /dev/null +++ b/drivers/gpio/gpio-msc313.c @@ -0,0 +1,460 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (C) 2020 Daniel Palmer<daniel@thingy.jp> */ + +#include <linux/bitops.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_irq.h> +#include <linux/gpio/driver.h> +#include <linux/module.h> +#include <linux/platform_device.h> + +#include <dt-bindings/gpio/msc313-gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +#define DRIVER_NAME "gpio-msc313" + +#define MSC313_GPIO_IN BIT(0) +#define MSC313_GPIO_OUT BIT(4) +#define MSC313_GPIO_OEN BIT(5) + +/* + * These bits need to be saved to correctly restore the + * gpio state when resuming from suspend to memory. + */ +#define MSC313_GPIO_BITSTOSAVE (MSC313_GPIO_OUT | MSC313_GPIO_OEN) + +/* pad names for fuart, same for all SoCs so far */ +#define MSC313_PINNAME_FUART_RX "fuart_rx" +#define MSC313_PINNAME_FUART_TX "fuart_tx" +#define MSC313_PINNAME_FUART_CTS "fuart_cts" +#define MSC313_PINNAME_FUART_RTS "fuart_rts" + +/* pad names for sr, mercury5 is different */ +#define MSC313_PINNAME_SR_IO2 "sr_io2" +#define MSC313_PINNAME_SR_IO3 "sr_io3" +#define MSC313_PINNAME_SR_IO4 "sr_io4" +#define MSC313_PINNAME_SR_IO5 "sr_io5" +#define MSC313_PINNAME_SR_IO6 "sr_io6" +#define MSC313_PINNAME_SR_IO7 "sr_io7" +#define MSC313_PINNAME_SR_IO8 "sr_io8" +#define MSC313_PINNAME_SR_IO9 "sr_io9" +#define MSC313_PINNAME_SR_IO10 "sr_io10" +#define MSC313_PINNAME_SR_IO11 "sr_io11" +#define MSC313_PINNAME_SR_IO12 "sr_io12" +#define MSC313_PINNAME_SR_IO13 "sr_io13" +#define MSC313_PINNAME_SR_IO14 "sr_io14" +#define MSC313_PINNAME_SR_IO15 "sr_io15" +#define MSC313_PINNAME_SR_IO16 "sr_io16" +#define MSC313_PINNAME_SR_IO17 "sr_io17" + +/* pad names for sd, same for all SoCs so far */ +#define MSC313_PINNAME_SD_CLK "sd_clk" +#define MSC313_PINNAME_SD_CMD "sd_cmd" +#define MSC313_PINNAME_SD_D0 "sd_d0" +#define MSC313_PINNAME_SD_D1 "sd_d1" +#define MSC313_PINNAME_SD_D2 "sd_d2" +#define MSC313_PINNAME_SD_D3 "sd_d3" + +/* pad names for i2c1, same for all SoCs so for */ +#define MSC313_PINNAME_I2C1_SCL "i2c1_scl" +#define MSC313_PINNAME_I2C1_SCA "i2c1_sda" + +/* pad names for spi0, same for all SoCs so far */ +#define MSC313_PINNAME_SPI0_CZ "spi0_cz" +#define MSC313_PINNAME_SPI0_CK "spi0_ck" +#define MSC313_PINNAME_SPI0_DI "spi0_di" +#define MSC313_PINNAME_SPI0_DO "spi0_do" + +#define FUART_NAMES \ + MSC313_PINNAME_FUART_RX, \ + MSC313_PINNAME_FUART_TX, \ + MSC313_PINNAME_FUART_CTS, \ + MSC313_PINNAME_FUART_RTS + +#define OFF_FUART_RX 0x50 +#define OFF_FUART_TX 0x54 +#define OFF_FUART_CTS 0x58 +#define OFF_FUART_RTS 0x5c + +#define FUART_OFFSETS \ + OFF_FUART_RX, \ + OFF_FUART_TX, \ + OFF_FUART_CTS, \ + OFF_FUART_RTS + +#define SR_NAMES \ + MSC313_PINNAME_SR_IO2, \ + MSC313_PINNAME_SR_IO3, \ + MSC313_PINNAME_SR_IO4, \ + MSC313_PINNAME_SR_IO5, \ + MSC313_PINNAME_SR_IO6, \ + MSC313_PINNAME_SR_IO7, \ + MSC313_PINNAME_SR_IO8, \ + MSC313_PINNAME_SR_IO9, \ + MSC313_PINNAME_SR_IO10, \ + MSC313_PINNAME_SR_IO11, \ + MSC313_PINNAME_SR_IO12, \ + MSC313_PINNAME_SR_IO13, \ + MSC313_PINNAME_SR_IO14, \ + MSC313_PINNAME_SR_IO15, \ + MSC313_PINNAME_SR_IO16, \ + MSC313_PINNAME_SR_IO17 + +#define OFF_SR_IO2 0x88 +#define OFF_SR_IO3 0x8c +#define OFF_SR_IO4 0x90 +#define OFF_SR_IO5 0x94 +#define OFF_SR_IO6 0x98 +#define OFF_SR_IO7 0x9c +#define OFF_SR_IO8 0xa0 +#define OFF_SR_IO9 0xa4 +#define OFF_SR_IO10 0xa8 +#define OFF_SR_IO11 0xac +#define OFF_SR_IO12 0xb0 +#define OFF_SR_IO13 0xb4 +#define OFF_SR_IO14 0xb8 +#define OFF_SR_IO15 0xbc +#define OFF_SR_IO16 0xc0 +#define OFF_SR_IO17 0xc4 + +#define SR_OFFSETS \ + OFF_SR_IO2, \ + OFF_SR_IO3, \ + OFF_SR_IO4, \ + OFF_SR_IO5, \ + OFF_SR_IO6, \ + OFF_SR_IO7, \ + OFF_SR_IO8, \ + OFF_SR_IO9, \ + OFF_SR_IO10, \ + OFF_SR_IO11, \ + OFF_SR_IO12, \ + OFF_SR_IO13, \ + OFF_SR_IO14, \ + OFF_SR_IO15, \ + OFF_SR_IO16, \ + OFF_SR_IO17 + +#define SD_NAMES \ + MSC313_PINNAME_SD_CLK, \ + MSC313_PINNAME_SD_CMD, \ + MSC313_PINNAME_SD_D0, \ + MSC313_PINNAME_SD_D1, \ + MSC313_PINNAME_SD_D2, \ + MSC313_PINNAME_SD_D3 + +#define OFF_SD_CLK 0x140 +#define OFF_SD_CMD 0x144 +#define OFF_SD_D0 0x148 +#define OFF_SD_D1 0x14c +#define OFF_SD_D2 0x150 +#define OFF_SD_D3 0x154 + +#define SD_OFFSETS \ + OFF_SD_CLK, \ + OFF_SD_CMD, \ + OFF_SD_D0, \ + OFF_SD_D1, \ + OFF_SD_D2, \ + OFF_SD_D3 + +#define I2C1_NAMES \ + MSC313_PINNAME_I2C1_SCL, \ + MSC313_PINNAME_I2C1_SCA + +#define OFF_I2C1_SCL 0x188 +#define OFF_I2C1_SCA 0x18c + +#define I2C1_OFFSETS \ + OFF_I2C1_SCL, \ + OFF_I2C1_SCA + +#define SPI0_NAMES \ + MSC313_PINNAME_SPI0_CZ, \ + MSC313_PINNAME_SPI0_CK, \ + MSC313_PINNAME_SPI0_DI, \ + MSC313_PINNAME_SPI0_DO + +#define OFF_SPI0_CZ 0x1c0 +#define OFF_SPI0_CK 0x1c4 +#define OFF_SPI0_DI 0x1c8 +#define OFF_SPI0_DO 0x1cc + +#define SPI0_OFFSETS \ + OFF_SPI0_CZ, \ + OFF_SPI0_CK, \ + OFF_SPI0_DI, \ + OFF_SPI0_DO + +struct msc313_gpio_data { + const char * const *names; + const unsigned int *offsets; + const unsigned int num; +}; + +#define MSC313_GPIO_CHIPDATA(_chip) \ +static const struct msc313_gpio_data _chip##_data = { \ + .names = _chip##_names, \ + .offsets = _chip##_offsets, \ + .num = ARRAY_SIZE(_chip##_offsets), \ +} + +#ifdef CONFIG_MACH_INFINITY +static const char * const msc313_names[] = { + FUART_NAMES, + SR_NAMES, + SD_NAMES, + I2C1_NAMES, + SPI0_NAMES, +}; + +static const unsigned int msc313_offsets[] = { + FUART_OFFSETS, + SR_OFFSETS, + SD_OFFSETS, + I2C1_OFFSETS, + SPI0_OFFSETS, +}; + +MSC313_GPIO_CHIPDATA(msc313); +#endif + +struct msc313_gpio { + void __iomem *base; + const struct msc313_gpio_data *gpio_data; + u8 *saved; +}; + +static void msc313_gpio_set(struct gpio_chip *chip, unsigned int offset, int value) +{ + struct msc313_gpio *gpio = gpiochip_get_data(chip); + u8 gpioreg = readb_relaxed(gpio->base + gpio->gpio_data->offsets[offset]); + + if (value) + gpioreg |= MSC313_GPIO_OUT; + else + gpioreg &= ~MSC313_GPIO_OUT; + + writeb_relaxed(gpioreg, gpio->base + gpio->gpio_data->offsets[offset]); +} + +static int msc313_gpio_get(struct gpio_chip *chip, unsigned int offset) +{ + struct msc313_gpio *gpio = gpiochip_get_data(chip); + + return readb_relaxed(gpio->base + gpio->gpio_data->offsets[offset]) & MSC313_GPIO_IN; +} + +static int msc313_gpio_direction_input(struct gpio_chip *chip, unsigned int offset) +{ + struct msc313_gpio *gpio = gpiochip_get_data(chip); + u8 gpioreg = readb_relaxed(gpio->base + gpio->gpio_data->offsets[offset]); + + gpioreg |= MSC313_GPIO_OEN; + writeb_relaxed(gpioreg, gpio->base + gpio->gpio_data->offsets[offset]); + + return 0; +} + +static int msc313_gpio_direction_output(struct gpio_chip *chip, unsigned int offset, int value) +{ + struct msc313_gpio *gpio = gpiochip_get_data(chip); + u8 gpioreg = readb_relaxed(gpio->base + gpio->gpio_data->offsets[offset]); + + gpioreg &= ~MSC313_GPIO_OEN; + if (value) + gpioreg |= MSC313_GPIO_OUT; + else + gpioreg &= ~MSC313_GPIO_OUT; + writeb_relaxed(gpioreg, gpio->base + gpio->gpio_data->offsets[offset]); + + return 0; +} + +/* + * The interrupt handling happens in the parent interrupt controller, + * we don't do anything here. + */ +static struct irq_chip msc313_gpio_irqchip = { + .name = "GPIO", + .irq_eoi = irq_chip_eoi_parent, + .irq_mask = irq_chip_mask_parent, + .irq_unmask = irq_chip_unmask_parent, + .irq_set_type = irq_chip_set_type_parent, + .irq_set_affinity = irq_chip_set_affinity_parent, +}; + +/* + * The parent interrupt controller needs the GIC interrupt type set to GIC_SPI + * so we need to provide the fwspec. Essentially gpiochip_populate_parent_fwspec_twocell + * that puts GIC_SPI into the first cell. + */ +static void *msc313_gpio_populate_parent_fwspec(struct gpio_chip *gc, + unsigned int parent_hwirq, + unsigned int parent_type) +{ + struct irq_fwspec *fwspec; + + fwspec = kmalloc(sizeof(*fwspec), GFP_KERNEL); + if (!fwspec) + return NULL; + + fwspec->fwnode = gc->irq.parent_domain->fwnode; + fwspec->param_count = 3; + fwspec->param[0] = GIC_SPI; + fwspec->param[1] = parent_hwirq; + fwspec->param[2] = parent_type; + + return fwspec; +} + +static int msc313e_gpio_child_to_parent_hwirq(struct gpio_chip *chip, + unsigned int child, + unsigned int child_type, + unsigned int *parent, + unsigned int *parent_type) +{ + struct msc313_gpio *priv = gpiochip_get_data(chip); + unsigned int offset = priv->gpio_data->offsets[child]; + + /* + * only the spi0 pins have interrupts on the parent + * on all of the known chips and so far they are all + * mapped to the same place + */ + if (offset >= OFF_SPI0_CZ && offset <= OFF_SPI0_DO) { + *parent_type = child_type; + *parent = ((offset - OFF_SPI0_CZ) >> 2) + 28; + return 0; + } + + return -EINVAL; +} + +static int msc313_gpio_probe(struct platform_device *pdev) +{ + const struct msc313_gpio_data *match_data; + struct msc313_gpio *gpio; + struct gpio_chip *gpiochip; + struct gpio_irq_chip *gpioirqchip; + struct irq_domain *parent_domain; + struct device_node *parent_node; + struct device *dev = &pdev->dev; + int ret; + + match_data = of_device_get_match_data(dev); + if (!match_data) + return -EINVAL; + + parent_node = of_irq_find_parent(dev->of_node); + if (!parent_node) + return -ENODEV; + + parent_domain = irq_find_host(parent_node); + if (!parent_domain) + return -ENODEV; + + gpio = devm_kzalloc(dev, sizeof(*gpio), GFP_KERNEL); + if (!gpio) + return -ENOMEM; + + gpio->gpio_data = match_data; + + gpio->saved = devm_kcalloc(dev, gpio->gpio_data->num, sizeof(*gpio->saved), GFP_KERNEL); + if (!gpio->saved) + return -ENOMEM; + + gpio->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(gpio->base)) + return PTR_ERR(gpio->base); + + platform_set_drvdata(pdev, gpio); + + gpiochip = devm_kzalloc(dev, sizeof(*gpiochip), GFP_KERNEL); + if (!gpiochip) + return -ENOMEM; + + gpiochip->label = DRIVER_NAME; + gpiochip->parent = dev; + gpiochip->request = gpiochip_generic_request; + gpiochip->free = gpiochip_generic_free; + gpiochip->direction_input = msc313_gpio_direction_input; + gpiochip->direction_output = msc313_gpio_direction_output; + gpiochip->get = msc313_gpio_get; + gpiochip->set = msc313_gpio_set; + gpiochip->base = -1; + gpiochip->ngpio = gpio->gpio_data->num; + gpiochip->names = gpio->gpio_data->names; + + gpioirqchip = &gpiochip->irq; + gpioirqchip->chip = &msc313_gpio_irqchip; + gpioirqchip->fwnode = of_node_to_fwnode(dev->of_node); + gpioirqchip->parent_domain = parent_domain; + gpioirqchip->child_to_parent_hwirq = msc313e_gpio_child_to_parent_hwirq; + gpioirqchip->populate_parent_alloc_arg = msc313_gpio_populate_parent_fwspec; + gpioirqchip->handler = handle_bad_irq; + gpioirqchip->default_type = IRQ_TYPE_NONE; + + ret = devm_gpiochip_add_data(dev, gpiochip, gpio); + return ret; +} + +static int msc313_gpio_remove(struct platform_device *pdev) +{ + return 0; +} + +static const struct of_device_id msc313_gpio_of_match[] = { +#ifdef CONFIG_MACH_INFINITY + { + .compatible = "mstar,msc313-gpio", + .data = &msc313_data, + }, +#endif + { } +}; + +/* + * The GPIO controller loses the state of the registers when the + * SoC goes into suspend to memory mode so we need to save some + * of the register bits before suspending and put it back when resuming + */ +static int __maybe_unused msc313_gpio_suspend(struct device *dev) +{ + struct msc313_gpio *gpio = dev_get_drvdata(dev); + int i; + + for (i = 0; i < gpio->gpio_data->num; i++) + gpio->saved[i] = readb_relaxed(gpio->base + gpio->gpio_data->offsets[i]) & MSC313_GPIO_BITSTOSAVE; + + return 0; +} + +static int __maybe_unused msc313_gpio_resume(struct device *dev) +{ + struct msc313_gpio *gpio = dev_get_drvdata(dev); + int i; + + for (i = 0; i < gpio->gpio_data->num; i++) + writeb_relaxed(gpio->saved[i], gpio->base + gpio->gpio_data->offsets[i]); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(msc313_gpio_ops, msc313_gpio_suspend, msc313_gpio_resume); + +static struct platform_driver msc313_gpio_driver = { + .driver = { + .name = DRIVER_NAME, + .of_match_table = msc313_gpio_of_match, + .pm = &msc313_gpio_ops, + }, + .probe = msc313_gpio_probe, + .remove = msc313_gpio_remove, +}; + +builtin_platform_driver(msc313_gpio_driver); |