1 files changed, 311 insertions, 9 deletions

diff --git a/drivers/gpio/gpio-brcmstb.c b/drivers/gpio/gpio-brcmstb.c
index 7a3cb1fa0a76..9ea86d2ac054 100644
--- a/drivers/gpio/gpio-brcmstb.c
+++ b/drivers/gpio/gpio-brcmstb.c
@@ -17,6 +17,10 @@
 #include <linux/of_irq.h>
 #include <linux/module.h>
 #include <linux/basic_mmio_gpio.h>
+#include <linux/irqdomain.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/interrupt.h>
+#include <linux/reboot.h>
 
 #define GIO_BANK_SIZE           0x20
 #define GIO_ODEN(bank)          (((bank) * GIO_BANK_SIZE) + 0x00)
@@ -34,14 +38,18 @@ struct brcmstb_gpio_bank {
 	struct bgpio_chip bgc;
 	struct brcmstb_gpio_priv *parent_priv;
 	u32 width;
+	struct irq_chip irq_chip;
 };
 
 struct brcmstb_gpio_priv {
 	struct list_head bank_list;
 	void __iomem *reg_base;
-	int num_banks;
 	struct platform_device *pdev;
+	int parent_irq;
 	int gpio_base;
+	bool can_wake;
+	int parent_wake_irq;
+	struct notifier_block reboot_notifier;
 };
 
 #define MAX_GPIO_PER_BANK           32
@@ -63,6 +71,203 @@ brcmstb_gpio_gc_to_priv(struct gpio_chip *gc)
 	return bank->parent_priv;
 }
 
+static void brcmstb_gpio_set_imask(struct brcmstb_gpio_bank *bank,
+		unsigned int offset, bool enable)
+{
+	struct bgpio_chip *bgc = &bank->bgc;
+	struct brcmstb_gpio_priv *priv = bank->parent_priv;
+	u32 mask = bgc->pin2mask(bgc, offset);
+	u32 imask;
+	unsigned long flags;
+
+	spin_lock_irqsave(&bgc->lock, flags);
+	imask = bgc->read_reg(priv->reg_base + GIO_MASK(bank->id));
+	if (enable)
+		imask |= mask;
+	else
+		imask &= ~mask;
+	bgc->write_reg(priv->reg_base + GIO_MASK(bank->id), imask);
+	spin_unlock_irqrestore(&bgc->lock, flags);
+}
+
+/* -------------------- IRQ chip functions -------------------- */
+
+static void brcmstb_gpio_irq_mask(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct brcmstb_gpio_bank *bank = brcmstb_gpio_gc_to_bank(gc);
+
+	brcmstb_gpio_set_imask(bank, d->hwirq, false);
+}
+
+static void brcmstb_gpio_irq_unmask(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct brcmstb_gpio_bank *bank = brcmstb_gpio_gc_to_bank(gc);
+
+	brcmstb_gpio_set_imask(bank, d->hwirq, true);
+}
+
+static int brcmstb_gpio_irq_set_type(struct irq_data *d, unsigned int type)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct brcmstb_gpio_bank *bank = brcmstb_gpio_gc_to_bank(gc);
+	struct brcmstb_gpio_priv *priv = bank->parent_priv;
+	u32 mask = BIT(d->hwirq);
+	u32 edge_insensitive, iedge_insensitive;
+	u32 edge_config, iedge_config;
+	u32 level, ilevel;
+	unsigned long flags;
+
+	switch (type) {
+	case IRQ_TYPE_LEVEL_LOW:
+		level = 0;
+		edge_config = 0;
+		edge_insensitive = 0;
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		level = mask;
+		edge_config = 0;
+		edge_insensitive = 0;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		level = 0;
+		edge_config = 0;
+		edge_insensitive = 0;
+		break;
+	case IRQ_TYPE_EDGE_RISING:
+		level = 0;
+		edge_config = mask;
+		edge_insensitive = 0;
+		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		level = 0;
+		edge_config = 0;  /* don't care, but want known value */
+		edge_insensitive = mask;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&bank->bgc.lock, flags);
+
+	iedge_config = bank->bgc.read_reg(priv->reg_base +
+			GIO_EC(bank->id)) & ~mask;
+	iedge_insensitive = bank->bgc.read_reg(priv->reg_base +
+			GIO_EI(bank->id)) & ~mask;
+	ilevel = bank->bgc.read_reg(priv->reg_base +
+			GIO_LEVEL(bank->id)) & ~mask;
+
+	bank->bgc.write_reg(priv->reg_base + GIO_EC(bank->id),
+			iedge_config | edge_config);
+	bank->bgc.write_reg(priv->reg_base + GIO_EI(bank->id),
+			iedge_insensitive | edge_insensitive);
+	bank->bgc.write_reg(priv->reg_base + GIO_LEVEL(bank->id),
+			ilevel | level);
+
+	spin_unlock_irqrestore(&bank->bgc.lock, flags);
+	return 0;
+}
+
+static int brcmstb_gpio_priv_set_wake(struct brcmstb_gpio_priv *priv,
+		unsigned int enable)
+{
+	int ret = 0;
+
+	/*
+	 * Only enable wake IRQ once for however many hwirqs can wake
+	 * since they all use the same wake IRQ.  Mask will be set
+	 * up appropriately thanks to IRQCHIP_MASK_ON_SUSPEND flag.
+	 */
+	if (enable)
+		ret = enable_irq_wake(priv->parent_wake_irq);
+	else
+		ret = disable_irq_wake(priv->parent_wake_irq);
+	if (ret)
+		dev_err(&priv->pdev->dev, "failed to %s wake-up interrupt\n",
+				enable ? "enable" : "disable");
+	return ret;
+}
+
+static int brcmstb_gpio_irq_set_wake(struct irq_data *d, unsigned int enable)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct brcmstb_gpio_priv *priv = brcmstb_gpio_gc_to_priv(gc);
+
+	return brcmstb_gpio_priv_set_wake(priv, enable);
+}
+
+static irqreturn_t brcmstb_gpio_wake_irq_handler(int irq, void *data)
+{
+	struct brcmstb_gpio_priv *priv = data;
+
+	if (!priv || irq != priv->parent_wake_irq)
+		return IRQ_NONE;
+	pm_wakeup_event(&priv->pdev->dev, 0);
+	return IRQ_HANDLED;
+}
+
+static void brcmstb_gpio_irq_bank_handler(struct brcmstb_gpio_bank *bank)
+{
+	struct brcmstb_gpio_priv *priv = bank->parent_priv;
+	struct irq_domain *irq_domain = bank->bgc.gc.irqdomain;
+	void __iomem *reg_base = priv->reg_base;
+	unsigned long status;
+	unsigned long flags;
+
+	spin_lock_irqsave(&bank->bgc.lock, flags);
+	while ((status = bank->bgc.read_reg(reg_base + GIO_STAT(bank->id)) &
+			 bank->bgc.read_reg(reg_base + GIO_MASK(bank->id)))) {
+		int bit;
+
+		for_each_set_bit(bit, &status, 32) {
+			u32 stat = bank->bgc.read_reg(reg_base +
+						      GIO_STAT(bank->id));
+			if (bit >= bank->width)
+				dev_warn(&priv->pdev->dev,
+					 "IRQ for invalid GPIO (bank=%d, offset=%d)\n",
+					 bank->id, bit);
+			bank->bgc.write_reg(reg_base + GIO_STAT(bank->id),
+					    stat | BIT(bit));
+			generic_handle_irq(irq_find_mapping(irq_domain, bit));
+		}
+	}
+	spin_unlock_irqrestore(&bank->bgc.lock, flags);
+}
+
+/* Each UPG GIO block has one IRQ for all banks */
+static void brcmstb_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+	struct gpio_chip *gc = irq_desc_get_handler_data(desc);
+	struct brcmstb_gpio_priv *priv = brcmstb_gpio_gc_to_priv(gc);
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+	struct list_head *pos;
+
+	/* Interrupts weren't properly cleared during probe */
+	BUG_ON(!priv || !chip);
+
+	chained_irq_enter(chip, desc);
+	list_for_each(pos, &priv->bank_list) {
+		struct brcmstb_gpio_bank *bank =
+			list_entry(pos, struct brcmstb_gpio_bank, node);
+		brcmstb_gpio_irq_bank_handler(bank);
+	}
+	chained_irq_exit(chip, desc);
+}
+
+static int brcmstb_gpio_reboot(struct notifier_block *nb,
+		unsigned long action, void *data)
+{
+	struct brcmstb_gpio_priv *priv =
+		container_of(nb, struct brcmstb_gpio_priv, reboot_notifier);
+
+	/* Enable GPIO for S5 cold boot */
+	if (action == SYS_POWER_OFF)
+		brcmstb_gpio_priv_set_wake(priv, 1);
+
+	return NOTIFY_DONE;
+}
+
 /* Make sure that the number of banks matches up between properties */
 static int brcmstb_gpio_sanity_check_banks(struct device *dev,
 		struct device_node *np, struct resource *res)
@@ -87,11 +292,26 @@ static int brcmstb_gpio_remove(struct platform_device *pdev)
 	struct brcmstb_gpio_bank *bank;
 	int ret = 0;
 
+	if (!priv) {
+		dev_err(&pdev->dev, "called %s without drvdata!\n", __func__);
+		return -EFAULT;
+	}
+
+	/*
+	 * You can lose return values below, but we report all errors, and it's
+	 * more important to actually perform all of the steps.
+	 */
 	list_for_each(pos, &priv->bank_list) {
 		bank = list_entry(pos, struct brcmstb_gpio_bank, node);
 		ret = bgpio_remove(&bank->bgc);
 		if (ret)
-			dev_err(&pdev->dev, "gpiochip_remove fail in cleanup");
+			dev_err(&pdev->dev, "gpiochip_remove fail in cleanup\n");
+	}
+	if (priv->reboot_notifier.notifier_call) {
+		ret = unregister_reboot_notifier(&priv->reboot_notifier);
+		if (ret)
+			dev_err(&pdev->dev,
+				"failed to unregister reboot notifier\n");
 	}
 	return ret;
 }
@@ -112,7 +332,7 @@ static int brcmstb_gpio_of_xlate(struct gpio_chip *gc,
 		return -EINVAL;
 
 	offset = gpiospec->args[0] - (gc->base - priv->gpio_base);
-	if (offset >= gc->ngpio)
+	if (offset >= gc->ngpio || offset < 0)
 		return -EINVAL;
 
 	if (unlikely(offset >= bank->width)) {
@@ -127,6 +347,65 @@ static int brcmstb_gpio_of_xlate(struct gpio_chip *gc,
 	return offset;
 }
 
+/* Before calling, must have bank->parent_irq set and gpiochip registered */
+static int brcmstb_gpio_irq_setup(struct platform_device *pdev,
+		struct brcmstb_gpio_bank *bank)
+{
+	struct brcmstb_gpio_priv *priv = bank->parent_priv;
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+
+	bank->irq_chip.name = dev_name(dev);
+	bank->irq_chip.irq_mask = brcmstb_gpio_irq_mask;
+	bank->irq_chip.irq_unmask = brcmstb_gpio_irq_unmask;
+	bank->irq_chip.irq_set_type = brcmstb_gpio_irq_set_type;
+
+	/* Ensures that all non-wakeup IRQs are disabled at suspend */
+	bank->irq_chip.flags = IRQCHIP_MASK_ON_SUSPEND;
+
+	if (IS_ENABLED(CONFIG_PM_SLEEP) && !priv->can_wake &&
+			of_property_read_bool(np, "wakeup-source")) {
+		priv->parent_wake_irq = platform_get_irq(pdev, 1);
+		if (priv->parent_wake_irq < 0) {
+			dev_warn(dev,
+				"Couldn't get wake IRQ - GPIOs will not be able to wake from sleep");
+		} else {
+			int err;
+
+			/*
+			 * Set wakeup capability before requesting wakeup
+			 * interrupt, so we can process boot-time "wakeups"
+			 * (e.g., from S5 cold boot)
+			 */
+			device_set_wakeup_capable(dev, true);
+			device_wakeup_enable(dev);
+			err = devm_request_irq(dev, priv->parent_wake_irq,
+					brcmstb_gpio_wake_irq_handler, 0,
+					"brcmstb-gpio-wake", priv);
+
+			if (err < 0) {
+				dev_err(dev, "Couldn't request wake IRQ");
+				return err;
+			}
+
+			priv->reboot_notifier.notifier_call =
+				brcmstb_gpio_reboot;
+			register_reboot_notifier(&priv->reboot_notifier);
+			priv->can_wake = true;
+		}
+	}
+
+	if (priv->can_wake)
+		bank->irq_chip.irq_set_wake = brcmstb_gpio_irq_set_wake;
+
+	gpiochip_irqchip_add(&bank->bgc.gc, &bank->irq_chip, 0,
+			handle_simple_irq, IRQ_TYPE_NONE);
+	gpiochip_set_chained_irqchip(&bank->bgc.gc, &bank->irq_chip,
+			priv->parent_irq, brcmstb_gpio_irq_handler);
+
+	return 0;
+}
+
 static int brcmstb_gpio_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -137,12 +416,15 @@ static int brcmstb_gpio_probe(struct platform_device *pdev)
 	struct property *prop;
 	const __be32 *p;
 	u32 bank_width;
+	int num_banks = 0;
 	int err;
 	static int gpio_base;
 
 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
+	platform_set_drvdata(pdev, priv);
+	INIT_LIST_HEAD(&priv->bank_list);
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	reg_base = devm_ioremap_resource(dev, res);
@@ -153,7 +435,16 @@ static int brcmstb_gpio_probe(struct platform_device *pdev)
 	priv->reg_base = reg_base;
 	priv->pdev = pdev;
 
-	INIT_LIST_HEAD(&priv->bank_list);
+	if (of_property_read_bool(np, "interrupt-controller")) {
+		priv->parent_irq = platform_get_irq(pdev, 0);
+		if (priv->parent_irq <= 0) {
+			dev_err(dev, "Couldn't get IRQ");
+			return -ENOENT;
+		}
+	} else {
+		priv->parent_irq = -ENOENT;
+	}
+
 	if (brcmstb_gpio_sanity_check_banks(dev, np, res))
 		return -EINVAL;
 
@@ -170,7 +461,7 @@ static int brcmstb_gpio_probe(struct platform_device *pdev)
 		}
 
 		bank->parent_priv = priv;
-		bank->id = priv->num_banks;
+		bank->id = num_banks;
 		if (bank_width <= 0 || bank_width > MAX_GPIO_PER_BANK) {
 			dev_err(dev, "Invalid bank width %d\n", bank_width);
 			goto fail;
@@ -202,6 +493,12 @@ static int brcmstb_gpio_probe(struct platform_device *pdev)
 		/* not all ngpio lines are valid, will use bank width later */
 		gc->ngpio = MAX_GPIO_PER_BANK;
 
+		/*
+		 * Mask all interrupts by default, since wakeup interrupts may
+		 * be retained from S5 cold boot
+		 */
+		bank->bgc.write_reg(reg_base + GIO_MASK(bank->id), 0);
+
 		err = gpiochip_add(gc);
 		if (err) {
 			dev_err(dev, "Could not add gpiochip for bank %d\n",
@@ -209,19 +506,24 @@ static int brcmstb_gpio_probe(struct platform_device *pdev)
 			goto fail;
 		}
 		gpio_base += gc->ngpio;
+
+		if (priv->parent_irq > 0) {
+			err = brcmstb_gpio_irq_setup(pdev, bank);
+			if (err)
+				goto fail;
+		}
+
 		dev_dbg(dev, "bank=%d, base=%d, ngpio=%d, width=%d\n", bank->id,
 			gc->base, gc->ngpio, bank->width);
 
 		/* Everything looks good, so add bank to list */
 		list_add(&bank->node, &priv->bank_list);
 
-		priv->num_banks++;
+		num_banks++;
 	}
 
 	dev_info(dev, "Registered %d banks (GPIO(s): %d-%d)\n",
-			priv->num_banks, priv->gpio_base, gpio_base - 1);
-
-	platform_set_drvdata(pdev, priv);
+			num_banks, priv->gpio_base, gpio_base - 1);
 
 	return 0;