diff options
Diffstat (limited to 'drivers/clocksource')
| -rw-r--r-- | drivers/clocksource/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/clocksource/Makefile | 1 | ||||
| -rw-r--r-- | drivers/clocksource/arm_arch_timer.c | 2 | ||||
| -rw-r--r-- | drivers/clocksource/arm_global_timer.c | 2 | ||||
| -rw-r--r-- | drivers/clocksource/mips-gic-timer.c | 20 | ||||
| -rw-r--r-- | drivers/clocksource/sh_cmt.c | 13 | ||||
| -rw-r--r-- | drivers/clocksource/timer-rtl-otto.c | 291 |
7 files changed, 328 insertions, 11 deletions
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index 34faa0320ece..95dd4660b5b6 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -134,6 +134,16 @@ config RDA_TIMER help Enables the support for the RDA Micro timer driver. +config REALTEK_OTTO_TIMER + bool "Clocksource/timer for the Realtek Otto platform" if COMPILE_TEST + select TIMER_OF + help + This driver adds support for the timers found in the Realtek RTL83xx + and RTL93xx SoCs series. This includes chips such as RTL8380, RTL8381 + and RTL832, as well as chips from the RTL839x series, such as RTL8390 + RT8391, RTL8392, RTL8393 and RTL8396 and chips of the RTL930x series + such as RTL9301, RTL9302 or RTL9303. + config SUN4I_TIMER bool "Sun4i timer driver" if COMPILE_TEST depends on HAS_IOMEM diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile index 4bb856e4df55..22743785299e 100644 --- a/drivers/clocksource/Makefile +++ b/drivers/clocksource/Makefile @@ -59,6 +59,7 @@ obj-$(CONFIG_MILBEAUT_TIMER) += timer-milbeaut.o obj-$(CONFIG_SPRD_TIMER) += timer-sprd.o obj-$(CONFIG_NPCM7XX_TIMER) += timer-npcm7xx.o obj-$(CONFIG_RDA_TIMER) += timer-rda.o +obj-$(CONFIG_REALTEK_OTTO_TIMER) += timer-rtl-otto.o obj-$(CONFIG_ARC_TIMERS) += arc_timer.o obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c index 5bb43cc1a8df..aeafc74181f0 100644 --- a/drivers/clocksource/arm_arch_timer.c +++ b/drivers/clocksource/arm_arch_timer.c @@ -1556,7 +1556,7 @@ static int __init arch_timer_mem_frame_register(struct arch_timer_mem_frame *frame) { void __iomem *base; - int ret, irq = 0; + int ret, irq; if (arch_timer_mem_use_virtual) irq = frame->virt_irq; diff --git a/drivers/clocksource/arm_global_timer.c b/drivers/clocksource/arm_global_timer.c index ab1c8c2b66b8..a05cfaab5f84 100644 --- a/drivers/clocksource/arm_global_timer.c +++ b/drivers/clocksource/arm_global_timer.c @@ -343,7 +343,7 @@ static int __init global_timer_of_register(struct device_node *np) { struct clk *gt_clk; static unsigned long gt_clk_rate; - int err = 0; + int err; /* * In A9 r2p0 the comparators for each processor with the global timer diff --git a/drivers/clocksource/mips-gic-timer.c b/drivers/clocksource/mips-gic-timer.c index b3ae38f36720..110347707ff9 100644 --- a/drivers/clocksource/mips-gic-timer.c +++ b/drivers/clocksource/mips-gic-timer.c @@ -19,6 +19,7 @@ static DEFINE_PER_CPU(struct clock_event_device, gic_clockevent_device); static int gic_timer_irq; static unsigned int gic_frequency; +static unsigned int gic_count_width; static bool __read_mostly gic_clock_unstable; static void gic_clocksource_unstable(char *reason); @@ -186,18 +187,21 @@ static void gic_clocksource_unstable(char *reason) static int __init __gic_clocksource_init(void) { - unsigned int count_width; int ret; /* Set clocksource mask. */ - count_width = read_gic_config() & GIC_CONFIG_COUNTBITS; - count_width >>= __ffs(GIC_CONFIG_COUNTBITS); - count_width *= 4; - count_width += 32; - gic_clocksource.mask = CLOCKSOURCE_MASK(count_width); + gic_count_width = read_gic_config() & GIC_CONFIG_COUNTBITS; + gic_count_width >>= __ffs(GIC_CONFIG_COUNTBITS); + gic_count_width *= 4; + gic_count_width += 32; + gic_clocksource.mask = CLOCKSOURCE_MASK(gic_count_width); /* Calculate a somewhat reasonable rating value. */ - gic_clocksource.rating = 200 + gic_frequency / 10000000; + if (mips_cm_revision() >= CM_REV_CM3 || !IS_ENABLED(CONFIG_CPU_FREQ)) + gic_clocksource.rating = 300; /* Good when frequecy is stable */ + else + gic_clocksource.rating = 200; + gic_clocksource.rating += clamp(gic_frequency / 10000000, 0, 99); ret = clocksource_register_hz(&gic_clocksource, gic_frequency); if (ret < 0) @@ -260,7 +264,7 @@ static int __init gic_clocksource_of_init(struct device_node *node) if (mips_cm_revision() >= CM_REV_CM3 || !IS_ENABLED(CONFIG_CPU_FREQ)) { sched_clock_register(mips_cm_is64 ? gic_read_count_64 : gic_read_count_2x32, - 64, gic_frequency); + gic_count_width, gic_frequency); } return 0; diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c index 26919556ef5f..b72b36e0abed 100644 --- a/drivers/clocksource/sh_cmt.c +++ b/drivers/clocksource/sh_cmt.c @@ -528,6 +528,7 @@ static void sh_cmt_set_next(struct sh_cmt_channel *ch, unsigned long delta) static irqreturn_t sh_cmt_interrupt(int irq, void *dev_id) { struct sh_cmt_channel *ch = dev_id; + unsigned long flags; /* clear flags */ sh_cmt_write_cmcsr(ch, sh_cmt_read_cmcsr(ch) & @@ -558,6 +559,8 @@ static irqreturn_t sh_cmt_interrupt(int irq, void *dev_id) ch->flags &= ~FLAG_SKIPEVENT; + raw_spin_lock_irqsave(&ch->lock, flags); + if (ch->flags & FLAG_REPROGRAM) { ch->flags &= ~FLAG_REPROGRAM; sh_cmt_clock_event_program_verify(ch, 1); @@ -570,6 +573,8 @@ static irqreturn_t sh_cmt_interrupt(int irq, void *dev_id) ch->flags &= ~FLAG_IRQCONTEXT; + raw_spin_unlock_irqrestore(&ch->lock, flags); + return IRQ_HANDLED; } @@ -780,12 +785,18 @@ static int sh_cmt_clock_event_next(unsigned long delta, struct clock_event_device *ced) { struct sh_cmt_channel *ch = ced_to_sh_cmt(ced); + unsigned long flags; BUG_ON(!clockevent_state_oneshot(ced)); + + raw_spin_lock_irqsave(&ch->lock, flags); + if (likely(ch->flags & FLAG_IRQCONTEXT)) ch->next_match_value = delta - 1; else - sh_cmt_set_next(ch, delta - 1); + __sh_cmt_set_next(ch, delta - 1); + + raw_spin_unlock_irqrestore(&ch->lock, flags); return 0; } diff --git a/drivers/clocksource/timer-rtl-otto.c b/drivers/clocksource/timer-rtl-otto.c new file mode 100644 index 000000000000..8a3068b36e75 --- /dev/null +++ b/drivers/clocksource/timer-rtl-otto.c @@ -0,0 +1,291 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/clk.h> +#include <linux/clockchips.h> +#include <linux/cpu.h> +#include <linux/cpuhotplug.h> +#include <linux/cpumask.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/jiffies.h> +#include <linux/printk.h> +#include <linux/sched_clock.h> +#include "timer-of.h" + +#define RTTM_DATA 0x0 +#define RTTM_CNT 0x4 +#define RTTM_CTRL 0x8 +#define RTTM_INT 0xc + +#define RTTM_CTRL_ENABLE BIT(28) +#define RTTM_INT_PENDING BIT(16) +#define RTTM_INT_ENABLE BIT(20) + +/* + * The Otto platform provides multiple 28 bit timers/counters with the following + * operating logic. If enabled the timer counts up. Per timer one can set a + * maximum counter value as an end marker. If end marker is reached the timer + * fires an interrupt. If the timer "overflows" by reaching the end marker or + * by adding 1 to 0x0fffffff the counter is reset to 0. When this happens and + * the timer is in operating mode COUNTER it stops. In mode TIMER it will + * continue to count up. + */ +#define RTTM_CTRL_COUNTER 0 +#define RTTM_CTRL_TIMER BIT(24) + +#define RTTM_BIT_COUNT 28 +#define RTTM_MIN_DELTA 8 +#define RTTM_MAX_DELTA CLOCKSOURCE_MASK(28) + +/* + * Timers are derived from the LXB clock frequency. Usually this is a fixed + * multiple of the 25 MHz oscillator. The 930X SOC is an exception from that. + * Its LXB clock has only dividers and uses the switch PLL of 2.45 GHz as its + * base. The only meaningful frequencies we can achieve from that are 175.000 + * MHz and 153.125 MHz. The greatest common divisor of all explained possible + * speeds is 3125000. Pin the timers to this 3.125 MHz reference frequency. + */ +#define RTTM_TICKS_PER_SEC 3125000 + +struct rttm_cs { + struct timer_of to; + struct clocksource cs; +}; + +/* Simple internal register functions */ +static inline void rttm_set_counter(void __iomem *base, unsigned int counter) +{ + iowrite32(counter, base + RTTM_CNT); +} + +static inline unsigned int rttm_get_counter(void __iomem *base) +{ + return ioread32(base + RTTM_CNT); +} + +static inline void rttm_set_period(void __iomem *base, unsigned int period) +{ + iowrite32(period, base + RTTM_DATA); +} + +static inline void rttm_disable_timer(void __iomem *base) +{ + iowrite32(0, base + RTTM_CTRL); +} + +static inline void rttm_enable_timer(void __iomem *base, u32 mode, u32 divisor) +{ + iowrite32(RTTM_CTRL_ENABLE | mode | divisor, base + RTTM_CTRL); +} + +static inline void rttm_ack_irq(void __iomem *base) +{ + iowrite32(ioread32(base + RTTM_INT) | RTTM_INT_PENDING, base + RTTM_INT); +} + +static inline void rttm_enable_irq(void __iomem *base) +{ + iowrite32(RTTM_INT_ENABLE, base + RTTM_INT); +} + +static inline void rttm_disable_irq(void __iomem *base) +{ + iowrite32(0, base + RTTM_INT); +} + +/* Aggregated control functions for kernel clock framework */ +#define RTTM_DEBUG(base) \ + pr_debug("------------- %d %p\n", \ + smp_processor_id(), base) + +static irqreturn_t rttm_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *clkevt = dev_id; + struct timer_of *to = to_timer_of(clkevt); + + rttm_ack_irq(to->of_base.base); + RTTM_DEBUG(to->of_base.base); + clkevt->event_handler(clkevt); + + return IRQ_HANDLED; +} + +static void rttm_stop_timer(void __iomem *base) +{ + rttm_disable_timer(base); + rttm_ack_irq(base); +} + +static void rttm_start_timer(struct timer_of *to, u32 mode) +{ + rttm_set_counter(to->of_base.base, 0); + rttm_enable_timer(to->of_base.base, mode, to->of_clk.rate / RTTM_TICKS_PER_SEC); +} + +static int rttm_next_event(unsigned long delta, struct clock_event_device *clkevt) +{ + struct timer_of *to = to_timer_of(clkevt); + + RTTM_DEBUG(to->of_base.base); + rttm_stop_timer(to->of_base.base); + rttm_set_period(to->of_base.base, delta); + rttm_start_timer(to, RTTM_CTRL_COUNTER); + + return 0; +} + +static int rttm_state_oneshot(struct clock_event_device *clkevt) +{ + struct timer_of *to = to_timer_of(clkevt); + + RTTM_DEBUG(to->of_base.base); + rttm_stop_timer(to->of_base.base); + rttm_set_period(to->of_base.base, RTTM_TICKS_PER_SEC / HZ); + rttm_start_timer(to, RTTM_CTRL_COUNTER); + + return 0; +} + +static int rttm_state_periodic(struct clock_event_device *clkevt) +{ + struct timer_of *to = to_timer_of(clkevt); + + RTTM_DEBUG(to->of_base.base); + rttm_stop_timer(to->of_base.base); + rttm_set_period(to->of_base.base, RTTM_TICKS_PER_SEC / HZ); + rttm_start_timer(to, RTTM_CTRL_TIMER); + + return 0; +} + +static int rttm_state_shutdown(struct clock_event_device *clkevt) +{ + struct timer_of *to = to_timer_of(clkevt); + + RTTM_DEBUG(to->of_base.base); + rttm_stop_timer(to->of_base.base); + + return 0; +} + +static void rttm_setup_timer(void __iomem *base) +{ + RTTM_DEBUG(base); + rttm_stop_timer(base); + rttm_set_period(base, 0); +} + +static u64 rttm_read_clocksource(struct clocksource *cs) +{ + struct rttm_cs *rcs = container_of(cs, struct rttm_cs, cs); + + return rttm_get_counter(rcs->to.of_base.base); +} + +/* Module initialization part. */ +static DEFINE_PER_CPU(struct timer_of, rttm_to) = { + .flags = TIMER_OF_BASE | TIMER_OF_CLOCK | TIMER_OF_IRQ, + .of_irq = { + .flags = IRQF_PERCPU | IRQF_TIMER, + .handler = rttm_timer_interrupt, + }, + .clkevt = { + .rating = 400, + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .set_state_periodic = rttm_state_periodic, + .set_state_shutdown = rttm_state_shutdown, + .set_state_oneshot = rttm_state_oneshot, + .set_next_event = rttm_next_event + }, +}; + +static int rttm_enable_clocksource(struct clocksource *cs) +{ + struct rttm_cs *rcs = container_of(cs, struct rttm_cs, cs); + + rttm_disable_irq(rcs->to.of_base.base); + rttm_setup_timer(rcs->to.of_base.base); + rttm_enable_timer(rcs->to.of_base.base, RTTM_CTRL_TIMER, + rcs->to.of_clk.rate / RTTM_TICKS_PER_SEC); + + return 0; +} + +struct rttm_cs rttm_cs = { + .to = { + .flags = TIMER_OF_BASE | TIMER_OF_CLOCK, + }, + .cs = { + .name = "realtek_otto_timer", + .rating = 400, + .mask = CLOCKSOURCE_MASK(RTTM_BIT_COUNT), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, + .read = rttm_read_clocksource, + } +}; + +static u64 notrace rttm_read_clock(void) +{ + return rttm_get_counter(rttm_cs.to.of_base.base); +} + +static int rttm_cpu_starting(unsigned int cpu) +{ + struct timer_of *to = per_cpu_ptr(&rttm_to, cpu); + + RTTM_DEBUG(to->of_base.base); + to->clkevt.cpumask = cpumask_of(cpu); + irq_force_affinity(to->of_irq.irq, to->clkevt.cpumask); + clockevents_config_and_register(&to->clkevt, RTTM_TICKS_PER_SEC, + RTTM_MIN_DELTA, RTTM_MAX_DELTA); + rttm_enable_irq(to->of_base.base); + + return 0; +} + +static int __init rttm_probe(struct device_node *np) +{ + unsigned int cpu, cpu_rollback; + struct timer_of *to; + unsigned int clkidx = num_possible_cpus(); + + /* Use the first n timers as per CPU clock event generators */ + for_each_possible_cpu(cpu) { + to = per_cpu_ptr(&rttm_to, cpu); + to->of_irq.index = to->of_base.index = cpu; + if (timer_of_init(np, to)) { + pr_err("setup of timer %d failed\n", cpu); + goto rollback; + } + rttm_setup_timer(to->of_base.base); + } + + /* Activate the n'th + 1 timer as a stable CPU clocksource. */ + to = &rttm_cs.to; + to->of_base.index = clkidx; + timer_of_init(np, to); + if (rttm_cs.to.of_base.base && rttm_cs.to.of_clk.rate) { + rttm_enable_clocksource(&rttm_cs.cs); + clocksource_register_hz(&rttm_cs.cs, RTTM_TICKS_PER_SEC); + sched_clock_register(rttm_read_clock, RTTM_BIT_COUNT, RTTM_TICKS_PER_SEC); + } else + pr_err(" setup of timer %d as clocksource failed", clkidx); + + return cpuhp_setup_state(CPUHP_AP_REALTEK_TIMER_STARTING, + "timer/realtek:online", + rttm_cpu_starting, NULL); +rollback: + pr_err("timer registration failed\n"); + for_each_possible_cpu(cpu_rollback) { + if (cpu_rollback == cpu) + break; + to = per_cpu_ptr(&rttm_to, cpu_rollback); + timer_of_cleanup(to); + } + + return -EINVAL; +} + +TIMER_OF_DECLARE(otto_timer, "realtek,otto-timer", rttm_probe); |