diff options
Diffstat (limited to 'drivers/bus')
| -rw-r--r-- | drivers/bus/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/bus/arm-integrator-lm.c | 1 | ||||
| -rw-r--r-- | drivers/bus/bt1-apb.c | 23 | ||||
| -rw-r--r-- | drivers/bus/bt1-axi.c | 23 | ||||
| -rw-r--r-- | drivers/bus/imx-weim.c | 14 | ||||
| -rw-r--r-- | drivers/bus/sunxi-rsb.c | 34 | ||||
| -rw-r--r-- | drivers/bus/ti-sysc.c | 7 |
7 files changed, 25 insertions, 79 deletions
diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig index 64cd2ee03aa3..ff669a8ccad9 100644 --- a/drivers/bus/Kconfig +++ b/drivers/bus/Kconfig @@ -89,7 +89,7 @@ config HISILICON_LPC config IMX_WEIM bool "Freescale EIM DRIVER" - depends on ARCH_MXC + depends on ARCH_MXC || COMPILE_TEST help Driver for i.MX WEIM controller. The WEIM(Wireless External Interface Module) works like a bus. diff --git a/drivers/bus/arm-integrator-lm.c b/drivers/bus/arm-integrator-lm.c index b715c8ab36e8..a65c79b08804 100644 --- a/drivers/bus/arm-integrator-lm.c +++ b/drivers/bus/arm-integrator-lm.c @@ -85,6 +85,7 @@ static int integrator_ap_lm_probe(struct platform_device *pdev) return -ENODEV; } map = syscon_node_to_regmap(syscon); + of_node_put(syscon); if (IS_ERR(map)) { dev_err(dev, "could not find Integrator/AP system controller\n"); diff --git a/drivers/bus/bt1-apb.c b/drivers/bus/bt1-apb.c index 595fb22b73e0..7463124b6dd9 100644 --- a/drivers/bus/bt1-apb.c +++ b/drivers/bus/bt1-apb.c @@ -185,34 +185,13 @@ static int bt1_apb_request_rst(struct bt1_apb *apb) return ret; } -static void bt1_apb_disable_clk(void *data) -{ - struct bt1_apb *apb = data; - - clk_disable_unprepare(apb->pclk); -} - static int bt1_apb_request_clk(struct bt1_apb *apb) { - int ret; - - apb->pclk = devm_clk_get(apb->dev, "pclk"); + apb->pclk = devm_clk_get_enabled(apb->dev, "pclk"); if (IS_ERR(apb->pclk)) return dev_err_probe(apb->dev, PTR_ERR(apb->pclk), "Couldn't get APB clock descriptor\n"); - ret = clk_prepare_enable(apb->pclk); - if (ret) { - dev_err(apb->dev, "Couldn't enable the APB clock\n"); - return ret; - } - - ret = devm_add_action_or_reset(apb->dev, bt1_apb_disable_clk, apb); - if (ret) { - dev_err(apb->dev, "Can't add APB EHB clocks disable action\n"); - return ret; - } - apb->rate = clk_get_rate(apb->pclk); if (!apb->rate) { dev_err(apb->dev, "Invalid clock rate\n"); diff --git a/drivers/bus/bt1-axi.c b/drivers/bus/bt1-axi.c index 4007e7322cf2..a5254c73bf43 100644 --- a/drivers/bus/bt1-axi.c +++ b/drivers/bus/bt1-axi.c @@ -146,33 +146,14 @@ static int bt1_axi_request_rst(struct bt1_axi *axi) return ret; } -static void bt1_axi_disable_clk(void *data) -{ - struct bt1_axi *axi = data; - - clk_disable_unprepare(axi->aclk); -} - static int bt1_axi_request_clk(struct bt1_axi *axi) { - int ret; - - axi->aclk = devm_clk_get(axi->dev, "aclk"); + axi->aclk = devm_clk_get_enabled(axi->dev, "aclk"); if (IS_ERR(axi->aclk)) return dev_err_probe(axi->dev, PTR_ERR(axi->aclk), "Couldn't get AXI Interconnect clock\n"); - ret = clk_prepare_enable(axi->aclk); - if (ret) { - dev_err(axi->dev, "Couldn't enable the AXI clock\n"); - return ret; - } - - ret = devm_add_action_or_reset(axi->dev, bt1_axi_disable_clk, axi); - if (ret) - dev_err(axi->dev, "Can't add AXI clock disable action\n"); - - return ret; + return 0; } static int bt1_axi_request_irq(struct bt1_axi *axi) diff --git a/drivers/bus/imx-weim.c b/drivers/bus/imx-weim.c index 837bf9d51c6e..83d623d97f5f 100644 --- a/drivers/bus/imx-weim.c +++ b/drivers/bus/imx-weim.c @@ -282,22 +282,18 @@ static int weim_probe(struct platform_device *pdev) dev_set_drvdata(&pdev->dev, priv); /* get the clock */ - clk = devm_clk_get(&pdev->dev, NULL); + clk = devm_clk_get_enabled(&pdev->dev, NULL); if (IS_ERR(clk)) return PTR_ERR(clk); - ret = clk_prepare_enable(clk); - if (ret) - return ret; - /* parse the device node */ ret = weim_parse_dt(pdev); if (ret) - clk_disable_unprepare(clk); - else - dev_info(&pdev->dev, "Driver registered.\n"); + return ret; - return ret; + dev_info(&pdev->dev, "Driver registered.\n"); + + return 0; } #if IS_ENABLED(CONFIG_OF_DYNAMIC) diff --git a/drivers/bus/sunxi-rsb.c b/drivers/bus/sunxi-rsb.c index eee41fb798a1..a89d78925637 100644 --- a/drivers/bus/sunxi-rsb.c +++ b/drivers/bus/sunxi-rsb.c @@ -751,12 +751,10 @@ static int sunxi_rsb_probe(struct platform_device *pdev) int irq, ret; of_property_read_u32(np, "clock-frequency", &clk_freq); - if (clk_freq > RSB_MAX_FREQ) { - dev_err(dev, - "clock-frequency (%u Hz) is too high (max = 20MHz)\n", - clk_freq); - return -EINVAL; - } + if (clk_freq > RSB_MAX_FREQ) + return dev_err_probe(dev, -EINVAL, + "clock-frequency (%u Hz) is too high (max = 20MHz)\n", + clk_freq); rsb = devm_kzalloc(dev, sizeof(*rsb), GFP_KERNEL); if (!rsb) @@ -774,28 +772,22 @@ static int sunxi_rsb_probe(struct platform_device *pdev) return irq; rsb->clk = devm_clk_get(dev, NULL); - if (IS_ERR(rsb->clk)) { - ret = PTR_ERR(rsb->clk); - dev_err(dev, "failed to retrieve clk: %d\n", ret); - return ret; - } + if (IS_ERR(rsb->clk)) + return dev_err_probe(dev, PTR_ERR(rsb->clk), + "failed to retrieve clk\n"); rsb->rstc = devm_reset_control_get(dev, NULL); - if (IS_ERR(rsb->rstc)) { - ret = PTR_ERR(rsb->rstc); - dev_err(dev, "failed to retrieve reset controller: %d\n", ret); - return ret; - } + if (IS_ERR(rsb->rstc)) + return dev_err_probe(dev, PTR_ERR(rsb->rstc), + "failed to retrieve reset controller\n"); init_completion(&rsb->complete); mutex_init(&rsb->lock); ret = devm_request_irq(dev, irq, sunxi_rsb_irq, 0, RSB_CTRL_NAME, rsb); - if (ret) { - dev_err(dev, "can't register interrupt handler irq %d: %d\n", - irq, ret); - return ret; - } + if (ret) + return dev_err_probe(dev, ret, + "can't register interrupt handler irq %d\n", irq); ret = sunxi_rsb_hw_init(rsb); if (ret) diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c index 2b59ef61dda2..270a94a06e05 100644 --- a/drivers/bus/ti-sysc.c +++ b/drivers/bus/ti-sysc.c @@ -126,7 +126,6 @@ static const char * const clock_names[SYSC_MAX_CLOCKS] = { * @enabled: sysc runtime enabled status * @needs_resume: runtime resume needed on resume from suspend * @child_needs_resume: runtime resume needed for child on resume from suspend - * @disable_on_idle: status flag used for disabling modules with resets * @idle_work: work structure used to perform delayed idle on a module * @pre_reset_quirk: module specific pre-reset quirk * @post_reset_quirk: module specific post-reset quirk @@ -2569,14 +2568,12 @@ static const struct sysc_dts_quirk sysc_dts_quirks[] = { static void sysc_parse_dts_quirks(struct sysc *ddata, struct device_node *np, bool is_child) { - const struct property *prop; - int i, len; + int i; for (i = 0; i < ARRAY_SIZE(sysc_dts_quirks); i++) { const char *name = sysc_dts_quirks[i].name; - prop = of_get_property(np, name, &len); - if (!prop) + if (!of_property_present(np, name)) continue; ddata->cfg.quirks |= sysc_dts_quirks[i].mask; |