diff options
Diffstat (limited to 'drivers/bluetooth/btintel_pcie.c')
| -rw-r--r-- | drivers/bluetooth/btintel_pcie.c | 1357 |
1 files changed, 1357 insertions, 0 deletions
diff --git a/drivers/bluetooth/btintel_pcie.c b/drivers/bluetooth/btintel_pcie.c new file mode 100644 index 000000000000..5b6805d87fcf --- /dev/null +++ b/drivers/bluetooth/btintel_pcie.c @@ -0,0 +1,1357 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * + * Bluetooth support for Intel PCIe devices + * + * Copyright (C) 2024 Intel Corporation + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/firmware.h> +#include <linux/pci.h> +#include <linux/wait.h> +#include <linux/delay.h> +#include <linux/interrupt.h> + +#include <asm/unaligned.h> + +#include <net/bluetooth/bluetooth.h> +#include <net/bluetooth/hci_core.h> + +#include "btintel.h" +#include "btintel_pcie.h" + +#define VERSION "0.1" + +#define BTINTEL_PCI_DEVICE(dev, subdev) \ + .vendor = PCI_VENDOR_ID_INTEL, \ + .device = (dev), \ + .subvendor = PCI_ANY_ID, \ + .subdevice = (subdev), \ + .driver_data = 0 + +#define POLL_INTERVAL_US 10 + +/* Intel Bluetooth PCIe device id table */ +static const struct pci_device_id btintel_pcie_table[] = { + { BTINTEL_PCI_DEVICE(0xA876, PCI_ANY_ID) }, + { 0 } +}; +MODULE_DEVICE_TABLE(pci, btintel_pcie_table); + +/* Intel PCIe uses 4 bytes of HCI type instead of 1 byte BT SIG HCI type */ +#define BTINTEL_PCIE_HCI_TYPE_LEN 4 +#define BTINTEL_PCIE_HCI_CMD_PKT 0x00000001 +#define BTINTEL_PCIE_HCI_ACL_PKT 0x00000002 +#define BTINTEL_PCIE_HCI_SCO_PKT 0x00000003 +#define BTINTEL_PCIE_HCI_EVT_PKT 0x00000004 + +static inline void ipc_print_ia_ring(struct hci_dev *hdev, struct ia *ia, + u16 queue_num) +{ + bt_dev_dbg(hdev, "IA: %s: tr-h:%02u tr-t:%02u cr-h:%02u cr-t:%02u", + queue_num == BTINTEL_PCIE_TXQ_NUM ? "TXQ" : "RXQ", + ia->tr_hia[queue_num], ia->tr_tia[queue_num], + ia->cr_hia[queue_num], ia->cr_tia[queue_num]); +} + +static inline void ipc_print_urbd1(struct hci_dev *hdev, struct urbd1 *urbd1, + u16 index) +{ + bt_dev_dbg(hdev, "RXQ:urbd1(%u) frbd_tag:%u status: 0x%x fixed:0x%x", + index, urbd1->frbd_tag, urbd1->status, urbd1->fixed); +} + +static int btintel_pcie_poll_bit(struct btintel_pcie_data *data, u32 offset, + u32 bits, u32 mask, int timeout_us) +{ + int t = 0; + u32 reg; + + do { + reg = btintel_pcie_rd_reg32(data, offset); + + if ((reg & mask) == (bits & mask)) + return t; + udelay(POLL_INTERVAL_US); + t += POLL_INTERVAL_US; + } while (t < timeout_us); + + return -ETIMEDOUT; +} + +static struct btintel_pcie_data *btintel_pcie_get_data(struct msix_entry *entry) +{ + u8 queue = entry->entry; + struct msix_entry *entries = entry - queue; + + return container_of(entries, struct btintel_pcie_data, msix_entries[0]); +} + +/* Set the doorbell for TXQ to notify the device that @index (actually index-1) + * of the TFD is updated and ready to transmit. + */ +static void btintel_pcie_set_tx_db(struct btintel_pcie_data *data, u16 index) +{ + u32 val; + + val = index; + val |= (BTINTEL_PCIE_TX_DB_VEC << 16); + + btintel_pcie_wr_reg32(data, BTINTEL_PCIE_CSR_HBUS_TARG_WRPTR, val); +} + +/* Copy the data to next(@tfd_index) data buffer and update the TFD(transfer + * descriptor) with the data length and the DMA address of the data buffer. + */ +static void btintel_pcie_prepare_tx(struct txq *txq, u16 tfd_index, + struct sk_buff *skb) +{ + struct data_buf *buf; + struct tfd *tfd; + + tfd = &txq->tfds[tfd_index]; + memset(tfd, 0, sizeof(*tfd)); + + buf = &txq->bufs[tfd_index]; + + tfd->size = skb->len; + tfd->addr = buf->data_p_addr; + + /* Copy the outgoing data to DMA buffer */ + memcpy(buf->data, skb->data, tfd->size); +} + +static int btintel_pcie_send_sync(struct btintel_pcie_data *data, + struct sk_buff *skb) +{ + int ret; + u16 tfd_index; + struct txq *txq = &data->txq; + + tfd_index = data->ia.tr_hia[BTINTEL_PCIE_TXQ_NUM]; + + if (tfd_index > txq->count) + return -ERANGE; + + /* Prepare for TX. It updates the TFD with the length of data and + * address of the DMA buffer, and copy the data to the DMA buffer + */ + btintel_pcie_prepare_tx(txq, tfd_index, skb); + + tfd_index = (tfd_index + 1) % txq->count; + data->ia.tr_hia[BTINTEL_PCIE_TXQ_NUM] = tfd_index; + + /* Arm wait event condition */ + data->tx_wait_done = false; + + /* Set the doorbell to notify the device */ + btintel_pcie_set_tx_db(data, tfd_index); + + /* Wait for the complete interrupt - URBD0 */ + ret = wait_event_timeout(data->tx_wait_q, data->tx_wait_done, + msecs_to_jiffies(BTINTEL_PCIE_TX_WAIT_TIMEOUT_MS)); + if (!ret) + return -ETIME; + + return 0; +} + +/* Set the doorbell for RXQ to notify the device that @index (actually index-1) + * is available to receive the data + */ +static void btintel_pcie_set_rx_db(struct btintel_pcie_data *data, u16 index) +{ + u32 val; + + val = index; + val |= (BTINTEL_PCIE_RX_DB_VEC << 16); + + btintel_pcie_wr_reg32(data, BTINTEL_PCIE_CSR_HBUS_TARG_WRPTR, val); +} + +/* Update the FRBD (free buffer descriptor) with the @frbd_index and the + * DMA address of the free buffer. + */ +static void btintel_pcie_prepare_rx(struct rxq *rxq, u16 frbd_index) +{ + struct data_buf *buf; + struct frbd *frbd; + + /* Get the buffer of the FRBD for DMA */ + buf = &rxq->bufs[frbd_index]; + + frbd = &rxq->frbds[frbd_index]; + memset(frbd, 0, sizeof(*frbd)); + + /* Update FRBD */ + frbd->tag = frbd_index; + frbd->addr = buf->data_p_addr; +} + +static int btintel_pcie_submit_rx(struct btintel_pcie_data *data) +{ + u16 frbd_index; + struct rxq *rxq = &data->rxq; + + frbd_index = data->ia.tr_hia[BTINTEL_PCIE_RXQ_NUM]; + + if (frbd_index > rxq->count) + return -ERANGE; + + /* Prepare for RX submit. It updates the FRBD with the address of DMA + * buffer + */ + btintel_pcie_prepare_rx(rxq, frbd_index); + + frbd_index = (frbd_index + 1) % rxq->count; + data->ia.tr_hia[BTINTEL_PCIE_RXQ_NUM] = frbd_index; + ipc_print_ia_ring(data->hdev, &data->ia, BTINTEL_PCIE_RXQ_NUM); + + /* Set the doorbell to notify the device */ + btintel_pcie_set_rx_db(data, frbd_index); + + return 0; +} + +static int btintel_pcie_start_rx(struct btintel_pcie_data *data) +{ + int i, ret; + + for (i = 0; i < BTINTEL_PCIE_RX_MAX_QUEUE; i++) { + ret = btintel_pcie_submit_rx(data); + if (ret) + return ret; + } + + return 0; +} + +static void btintel_pcie_reset_ia(struct btintel_pcie_data *data) +{ + memset(data->ia.tr_hia, 0, sizeof(u16) * BTINTEL_PCIE_NUM_QUEUES); + memset(data->ia.tr_tia, 0, sizeof(u16) * BTINTEL_PCIE_NUM_QUEUES); + memset(data->ia.cr_hia, 0, sizeof(u16) * BTINTEL_PCIE_NUM_QUEUES); + memset(data->ia.cr_tia, 0, sizeof(u16) * BTINTEL_PCIE_NUM_QUEUES); +} + +static void btintel_pcie_reset_bt(struct btintel_pcie_data *data) +{ + btintel_pcie_wr_reg32(data, BTINTEL_PCIE_CSR_FUNC_CTRL_REG, + BTINTEL_PCIE_CSR_FUNC_CTRL_SW_RESET); +} + +/* This function enables BT function by setting BTINTEL_PCIE_CSR_FUNC_CTRL_MAC_INIT bit in + * BTINTEL_PCIE_CSR_FUNC_CTRL_REG register and wait for MSI-X with + * BTINTEL_PCIE_MSIX_HW_INT_CAUSES_GP0. + * Then the host reads firmware version from BTINTEL_CSR_F2D_MBX and the boot stage + * from BTINTEL_PCIE_CSR_BOOT_STAGE_REG. + */ +static int btintel_pcie_enable_bt(struct btintel_pcie_data *data) +{ + int err; + + data->gp0_received = false; + + /* Update the DMA address of CI struct to CSR */ + btintel_pcie_wr_reg32(data, BTINTEL_PCIE_CSR_CI_ADDR_LSB_REG, + data->ci_p_addr & 0xffffffff); + btintel_pcie_wr_reg32(data, BTINTEL_PCIE_CSR_CI_ADDR_MSB_REG, + (u64)data->ci_p_addr >> 32); + + /* Reset the cached value of boot stage. it is updated by the MSI-X + * gp0 interrupt handler. + */ + data->boot_stage_cache = 0x0; + + /* Set MAC_INIT bit to start primary bootloader */ + btintel_pcie_rd_reg32(data, BTINTEL_PCIE_CSR_FUNC_CTRL_REG); + + btintel_pcie_set_reg_bits(data, BTINTEL_PCIE_CSR_FUNC_CTRL_REG, + BTINTEL_PCIE_CSR_FUNC_CTRL_MAC_INIT); + + /* Wait until MAC_ACCESS is granted */ + err = btintel_pcie_poll_bit(data, BTINTEL_PCIE_CSR_FUNC_CTRL_REG, + BTINTEL_PCIE_CSR_FUNC_CTRL_MAC_ACCESS_STS, + BTINTEL_PCIE_CSR_FUNC_CTRL_MAC_ACCESS_STS, + BTINTEL_DEFAULT_MAC_ACCESS_TIMEOUT_US); + if (err < 0) + return -ENODEV; + + /* MAC is ready. Enable BT FUNC */ + btintel_pcie_set_reg_bits(data, BTINTEL_PCIE_CSR_FUNC_CTRL_REG, + BTINTEL_PCIE_CSR_FUNC_CTRL_FUNC_ENA | + BTINTEL_PCIE_CSR_FUNC_CTRL_FUNC_INIT); + + btintel_pcie_rd_reg32(data, BTINTEL_PCIE_CSR_FUNC_CTRL_REG); + + /* wait for interrupt from the device after booting up to primary + * bootloader. + */ + err = wait_event_timeout(data->gp0_wait_q, data->gp0_received, + msecs_to_jiffies(BTINTEL_DEFAULT_INTR_TIMEOUT)); + if (!err) + return -ETIME; + + /* Check cached boot stage is BTINTEL_PCIE_CSR_BOOT_STAGE_ROM(BIT(0)) */ + if (~data->boot_stage_cache & BTINTEL_PCIE_CSR_BOOT_STAGE_ROM) + return -ENODEV; + + return 0; +} + +/* This function handles the MSI-X interrupt for gp0 cause (bit 0 in + * BTINTEL_PCIE_CSR_MSIX_HW_INT_CAUSES) which is sent for boot stage and image response. + */ +static void btintel_pcie_msix_gp0_handler(struct btintel_pcie_data *data) +{ + u32 reg; + + /* This interrupt is for three different causes and it is not easy to + * know what causes the interrupt. So, it compares each register value + * with cached value and update it before it wake up the queue. + */ + reg = btintel_pcie_rd_reg32(data, BTINTEL_PCIE_CSR_BOOT_STAGE_REG); + if (reg != data->boot_stage_cache) + data->boot_stage_cache = reg; + + reg = btintel_pcie_rd_reg32(data, BTINTEL_PCIE_CSR_IMG_RESPONSE_REG); + if (reg != data->img_resp_cache) + data->img_resp_cache = reg; + + data->gp0_received = true; + + /* If the boot stage is OP or IML, reset IA and start RX again */ + if (data->boot_stage_cache & BTINTEL_PCIE_CSR_BOOT_STAGE_OPFW || + data->boot_stage_cache & BTINTEL_PCIE_CSR_BOOT_STAGE_IML) { + btintel_pcie_reset_ia(data); + btintel_pcie_start_rx(data); + } + + wake_up(&data->gp0_wait_q); +} + +/* This function handles the MSX-X interrupt for rx queue 0 which is for TX + */ +static void btintel_pcie_msix_tx_handle(struct btintel_pcie_data *data) +{ + u16 cr_tia, cr_hia; + struct txq *txq; + struct urbd0 *urbd0; + + cr_tia = data->ia.cr_tia[BTINTEL_PCIE_TXQ_NUM]; + cr_hia = data->ia.cr_hia[BTINTEL_PCIE_TXQ_NUM]; + + if (cr_tia == cr_hia) + return; + + txq = &data->txq; + + while (cr_tia != cr_hia) { + data->tx_wait_done = true; + wake_up(&data->tx_wait_q); + + urbd0 = &txq->urbd0s[cr_tia]; + + if (urbd0->tfd_index > txq->count) + return; + + cr_tia = (cr_tia + 1) % txq->count; + data->ia.cr_tia[BTINTEL_PCIE_TXQ_NUM] = cr_tia; + ipc_print_ia_ring(data->hdev, &data->ia, BTINTEL_PCIE_TXQ_NUM); + } +} + +/* Process the received rx data + * It check the frame header to identify the data type and create skb + * and calling HCI API + */ +static int btintel_pcie_recv_frame(struct btintel_pcie_data *data, + struct sk_buff *skb) +{ + int ret; + u8 pkt_type; + u16 plen; + u32 pcie_pkt_type; + struct sk_buff *new_skb; + void *pdata; + struct hci_dev *hdev = data->hdev; + + spin_lock(&data->hci_rx_lock); + + /* The first 4 bytes indicates the Intel PCIe specific packet type */ + pdata = skb_pull_data(skb, BTINTEL_PCIE_HCI_TYPE_LEN); + if (!data) { + bt_dev_err(hdev, "Corrupted packet received"); + ret = -EILSEQ; + goto exit_error; + } + + pcie_pkt_type = get_unaligned_le32(pdata); + + switch (pcie_pkt_type) { + case BTINTEL_PCIE_HCI_ACL_PKT: + if (skb->len >= HCI_ACL_HDR_SIZE) { + plen = HCI_ACL_HDR_SIZE + __le16_to_cpu(hci_acl_hdr(skb)->dlen); + pkt_type = HCI_ACLDATA_PKT; + } else { + bt_dev_err(hdev, "ACL packet is too short"); + ret = -EILSEQ; + goto exit_error; + } + break; + + case BTINTEL_PCIE_HCI_SCO_PKT: + if (skb->len >= HCI_SCO_HDR_SIZE) { + plen = HCI_SCO_HDR_SIZE + hci_sco_hdr(skb)->dlen; + pkt_type = HCI_SCODATA_PKT; + } else { + bt_dev_err(hdev, "SCO packet is too short"); + ret = -EILSEQ; + goto exit_error; + } + break; + + case BTINTEL_PCIE_HCI_EVT_PKT: + if (skb->len >= HCI_EVENT_HDR_SIZE) { + plen = HCI_EVENT_HDR_SIZE + hci_event_hdr(skb)->plen; + pkt_type = HCI_EVENT_PKT; + } else { + bt_dev_err(hdev, "Event packet is too short"); + ret = -EILSEQ; + goto exit_error; + } + break; + default: + bt_dev_err(hdev, "Invalid packet type received: 0x%4.4x", + pcie_pkt_type); + ret = -EINVAL; + goto exit_error; + } + + if (skb->len < plen) { + bt_dev_err(hdev, "Received corrupted packet. type: 0x%2.2x", + pkt_type); + ret = -EILSEQ; + goto exit_error; + } + + bt_dev_dbg(hdev, "pkt_type: 0x%2.2x len: %u", pkt_type, plen); + + new_skb = bt_skb_alloc(plen, GFP_ATOMIC); + if (!new_skb) { + bt_dev_err(hdev, "Failed to allocate memory for skb of len: %u", + skb->len); + ret = -ENOMEM; + goto exit_error; + } + + hci_skb_pkt_type(new_skb) = pkt_type; + skb_put_data(new_skb, skb->data, plen); + hdev->stat.byte_rx += plen; + + if (pcie_pkt_type == BTINTEL_PCIE_HCI_EVT_PKT) + ret = btintel_recv_event(hdev, new_skb); + else + ret = hci_recv_frame(hdev, new_skb); + +exit_error: + if (ret) + hdev->stat.err_rx++; + + spin_unlock(&data->hci_rx_lock); + + return ret; +} + +static void btintel_pcie_rx_work(struct work_struct *work) +{ + struct btintel_pcie_data *data = container_of(work, + struct btintel_pcie_data, rx_work); + struct sk_buff *skb; + int err; + struct hci_dev *hdev = data->hdev; + + /* Process the sk_buf in queue and send to the HCI layer */ + while ((skb = skb_dequeue(&data->rx_skb_q))) { + err = btintel_pcie_recv_frame(data, skb); + if (err) + bt_dev_err(hdev, "Failed to send received frame: %d", + err); + kfree_skb(skb); + } +} + +/* create sk_buff with data and save it to queue and start RX work */ +static int btintel_pcie_submit_rx_work(struct btintel_pcie_data *data, u8 status, + void *buf) +{ + int ret, len; + struct rfh_hdr *rfh_hdr; + struct sk_buff *skb; + + rfh_hdr = buf; + + len = rfh_hdr->packet_len; + if (len <= 0) { + ret = -EINVAL; + goto resubmit; + } + + /* Remove RFH header */ + buf += sizeof(*rfh_hdr); + + skb = alloc_skb(len, GFP_ATOMIC); + if (!skb) { + ret = -ENOMEM; + goto resubmit; + } + + skb_put_data(skb, buf, len); + skb_queue_tail(&data->rx_skb_q, skb); + queue_work(data->workqueue, &data->rx_work); + +resubmit: + ret = btintel_pcie_submit_rx(data); + + return ret; +} + +/* Handles the MSI-X interrupt for rx queue 1 which is for RX */ +static void btintel_pcie_msix_rx_handle(struct btintel_pcie_data *data) +{ + u16 cr_hia, cr_tia; + struct rxq *rxq; + struct urbd1 *urbd1; + struct data_buf *buf; + int ret; + struct hci_dev *hdev = data->hdev; + + cr_hia = data->ia.cr_hia[BTINTEL_PCIE_RXQ_NUM]; + cr_tia = data->ia.cr_tia[BTINTEL_PCIE_RXQ_NUM]; + + bt_dev_dbg(hdev, "RXQ: cr_hia: %u cr_tia: %u", cr_hia, cr_tia); + + /* Check CR_TIA and CR_HIA for change */ + if (cr_tia == cr_hia) { + bt_dev_warn(hdev, "RXQ: no new CD found"); + return; + } + + rxq = &data->rxq; + + /* The firmware sends multiple CD in a single MSI-X and it needs to + * process all received CDs in this interrupt. + */ + while (cr_tia != cr_hia) { + urbd1 = &rxq->urbd1s[cr_tia]; + ipc_print_urbd1(data->hdev, urbd1, cr_tia); + + buf = &rxq->bufs[urbd1->frbd_tag]; + if (!buf) { + bt_dev_err(hdev, "RXQ: failed to get the DMA buffer for %d", + urbd1->frbd_tag); + return; + } + + ret = btintel_pcie_submit_rx_work(data, urbd1->status, + buf->data); + if (ret) { + bt_dev_err(hdev, "RXQ: failed to submit rx request"); + return; + } + + cr_tia = (cr_tia + 1) % rxq->count; + data->ia.cr_tia[BTINTEL_PCIE_RXQ_NUM] = cr_tia; + ipc_print_ia_ring(data->hdev, &data->ia, BTINTEL_PCIE_RXQ_NUM); + } +} + +static irqreturn_t btintel_pcie_msix_isr(int irq, void *data) +{ + return IRQ_WAKE_THREAD; +} + +static irqreturn_t btintel_pcie_irq_msix_handler(int irq, void *dev_id) +{ + struct msix_entry *entry = dev_id; + struct btintel_pcie_data *data = btintel_pcie_get_data(entry); + u32 intr_fh, intr_hw; + + spin_lock(&data->irq_lock); + intr_fh = btintel_pcie_rd_reg32(data, BTINTEL_PCIE_CSR_MSIX_FH_INT_CAUSES); + intr_hw = btintel_pcie_rd_reg32(data, BTINTEL_PCIE_CSR_MSIX_HW_INT_CAUSES); + + /* Clear causes registers to avoid being handling the same cause */ + btintel_pcie_wr_reg32(data, BTINTEL_PCIE_CSR_MSIX_FH_INT_CAUSES, intr_fh); + btintel_pcie_wr_reg32(data, BTINTEL_PCIE_CSR_MSIX_HW_INT_CAUSES, intr_hw); + spin_unlock(&data->irq_lock); + + if (unlikely(!(intr_fh | intr_hw))) { + /* Ignore interrupt, inta == 0 */ + return IRQ_NONE; + } + + /* This interrupt is triggered by the firmware after updating + * boot_stage register and image_response register + */ + if (intr_hw & BTINTEL_PCIE_MSIX_HW_INT_CAUSES_GP0) + btintel_pcie_msix_gp0_handler(data); + + /* For TX */ + if (intr_fh & BTINTEL_PCIE_MSIX_FH_INT_CAUSES_0) + btintel_pcie_msix_tx_handle(data); + + /* For RX */ + if (intr_fh & BTINTEL_PCIE_MSIX_FH_INT_CAUSES_1) + btintel_pcie_msix_rx_handle(data); + + /* + * Before sending the interrupt the HW disables it to prevent a nested + * interrupt. This is done by writing 1 to the corresponding bit in + * the mask register. After handling the interrupt, it should be + * re-enabled by clearing this bit. This register is defined as write 1 + * clear (W1C) register, meaning that it's cleared by writing 1 + * to the bit. + */ + btintel_pcie_wr_reg32(data, BTINTEL_PCIE_CSR_MSIX_AUTOMASK_ST, + BIT(entry->entry)); + + return IRQ_HANDLED; +} + +/* This function requests the irq for MSI-X and registers the handlers per irq. + * Currently, it requests only 1 irq for all interrupt causes. + */ +static int btintel_pcie_setup_irq(struct btintel_pcie_data *data) +{ + int err; + int num_irqs, i; + + for (i = 0; i < BTINTEL_PCIE_MSIX_VEC_MAX; i++) + data->msix_entries[i].entry = i; + + num_irqs = pci_alloc_irq_vectors(data->pdev, BTINTEL_PCIE_MSIX_VEC_MIN, + BTINTEL_PCIE_MSIX_VEC_MAX, PCI_IRQ_MSIX); + if (num_irqs < 0) + return num_irqs; + + data->alloc_vecs = num_irqs; + data->msix_enabled = 1; + data->def_irq = 0; + + /* setup irq handler */ + for (i = 0; i < data->alloc_vecs; i++) { + struct msix_entry *msix_entry; + + msix_entry = &data->msix_entries[i]; + msix_entry->vector = pci_irq_vector(data->pdev, i); + + err = devm_request_threaded_irq(&data->pdev->dev, + msix_entry->vector, + btintel_pcie_msix_isr, + btintel_pcie_irq_msix_handler, + IRQF_SHARED, + KBUILD_MODNAME, + msix_entry); + if (err) { + pci_free_irq_vectors(data->pdev); + data->alloc_vecs = 0; + return err; + } + } + return 0; +} + +struct btintel_pcie_causes_list { + u32 cause; + u32 mask_reg; + u8 cause_num; +}; + +static struct btintel_pcie_causes_list causes_list[] = { + { BTINTEL_PCIE_MSIX_FH_INT_CAUSES_0, BTINTEL_PCIE_CSR_MSIX_FH_INT_MASK, 0x00 }, + { BTINTEL_PCIE_MSIX_FH_INT_CAUSES_1, BTINTEL_PCIE_CSR_MSIX_FH_INT_MASK, 0x01 }, + { BTINTEL_PCIE_MSIX_HW_INT_CAUSES_GP0, BTINTEL_PCIE_CSR_MSIX_HW_INT_MASK, 0x20 }, +}; + +/* This function configures the interrupt masks for both HW_INT_CAUSES and + * FH_INT_CAUSES which are meaningful to us. + * + * After resetting BT function via PCIE FLR or FUNC_CTRL reset, the driver + * need to call this function again to configure since the masks + * are reset to 0xFFFFFFFF after reset. + */ +static void btintel_pcie_config_msix(struct btintel_pcie_data *data) +{ + int i; + int val = data->def_irq | BTINTEL_PCIE_MSIX_NON_AUTO_CLEAR_CAUSE; + + /* Set Non Auto Clear Cause */ + for (i = 0; i < ARRAY_SIZE(causes_list); i++) { + btintel_pcie_wr_reg8(data, + BTINTEL_PCIE_CSR_MSIX_IVAR(causes_list[i].cause_num), + val); + btintel_pcie_clr_reg_bits(data, + causes_list[i].mask_reg, + causes_list[i].cause); + } + + /* Save the initial interrupt mask */ + data->fh_init_mask = ~btintel_pcie_rd_reg32(data, BTINTEL_PCIE_CSR_MSIX_FH_INT_MASK); + data->hw_init_mask = ~btintel_pcie_rd_reg32(data, BTINTEL_PCIE_CSR_MSIX_HW_INT_MASK); +} + +static int btintel_pcie_config_pcie(struct pci_dev *pdev, + struct btintel_pcie_data *data) +{ + int err; + + err = pcim_enable_device(pdev); + if (err) + return err; + + pci_set_master(pdev); + + err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64)); + if (err) { + err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); + if (err) + return err; + } + + err = pcim_iomap_regions(pdev, BIT(0), KBUILD_MODNAME); + if (err) + return err; + + data->base_addr = pcim_iomap_table(pdev)[0]; + if (!data->base_addr) + return -ENODEV; + + err = btintel_pcie_setup_irq(data); + if (err) + return err; + + /* Configure MSI-X with causes list */ + btintel_pcie_config_msix(data); + + return 0; +} + +static void btintel_pcie_init_ci(struct btintel_pcie_data *data, + struct ctx_info *ci) +{ + ci->version = 0x1; + ci->size = sizeof(*ci); + ci->config = 0x0000; + ci->addr_cr_hia = data->ia.cr_hia_p_addr; + ci->addr_tr_tia = data->ia.tr_tia_p_addr; + ci->addr_cr_tia = data->ia.cr_tia_p_addr; + ci->addr_tr_hia = data->ia.tr_hia_p_addr; + ci->num_cr_ia = BTINTEL_PCIE_NUM_QUEUES; + ci->num_tr_ia = BTINTEL_PCIE_NUM_QUEUES; + ci->addr_urbdq0 = data->txq.urbd0s_p_addr; + ci->addr_tfdq = data->txq.tfds_p_addr; + ci->num_tfdq = data->txq.count; + ci->num_urbdq0 = data->txq.count; + ci->tfdq_db_vec = BTINTEL_PCIE_TXQ_NUM; + ci->urbdq0_db_vec = BTINTEL_PCIE_TXQ_NUM; + ci->rbd_size = BTINTEL_PCIE_RBD_SIZE_4K; + ci->addr_frbdq = data->rxq.frbds_p_addr; + ci->num_frbdq = data->rxq.count; + ci->frbdq_db_vec = BTINTEL_PCIE_RXQ_NUM; + ci->addr_urbdq1 = data->rxq.urbd1s_p_addr; + ci->num_urbdq1 = data->rxq.count; + ci->urbdq_db_vec = BTINTEL_PCIE_RXQ_NUM; +} + +static void btintel_pcie_free_txq_bufs(struct btintel_pcie_data *data, + struct txq *txq) +{ + /* Free data buffers first */ + dma_free_coherent(&data->pdev->dev, txq->count * BTINTEL_PCIE_BUFFER_SIZE, + txq->buf_v_addr, txq->buf_p_addr); + kfree(txq->bufs); +} + +static int btintel_pcie_setup_txq_bufs(struct btintel_pcie_data *data, + struct txq *txq) +{ + int i; + struct data_buf *buf; + + /* Allocate the same number of buffers as the descriptor */ + txq->bufs = kmalloc_array(txq->count, sizeof(*buf), GFP_KERNEL); + if (!txq->bufs) + return -ENOMEM; + + /* Allocate full chunk of data buffer for DMA first and do indexing and + * initialization next, so it can be freed easily + */ + txq->buf_v_addr = dma_alloc_coherent(&data->pdev->dev, + txq->count * BTINTEL_PCIE_BUFFER_SIZE, + &txq->buf_p_addr, + GFP_KERNEL | __GFP_NOWARN); + if (!txq->buf_v_addr) { + kfree(txq->bufs); + return -ENOMEM; + } + memset(txq->buf_v_addr, 0, txq->count * BTINTEL_PCIE_BUFFER_SIZE); + + /* Setup the allocated DMA buffer to bufs. Each data_buf should + * have virtual address and physical address + */ + for (i = 0; i < txq->count; i++) { + buf = &txq->bufs[i]; + buf->data_p_addr = txq->buf_p_addr + (i * BTINTEL_PCIE_BUFFER_SIZE); + buf->data = txq->buf_v_addr + (i * BTINTEL_PCIE_BUFFER_SIZE); + } + + return 0; +} + +static void btintel_pcie_free_rxq_bufs(struct btintel_pcie_data *data, + struct rxq *rxq) +{ + /* Free data buffers first */ + dma_free_coherent(&data->pdev->dev, rxq->count * BTINTEL_PCIE_BUFFER_SIZE, + rxq->buf_v_addr, rxq->buf_p_addr); + kfree(rxq->bufs); +} + +static int btintel_pcie_setup_rxq_bufs(struct btintel_pcie_data *data, + struct rxq *rxq) +{ + int i; + struct data_buf *buf; + + /* Allocate the same number of buffers as the descriptor */ + rxq->bufs = kmalloc_array(rxq->count, sizeof(*buf), GFP_KERNEL); + if (!rxq->bufs) + return -ENOMEM; + + /* Allocate full chunk of data buffer for DMA first and do indexing and + * initialization next, so it can be freed easily + */ + rxq->buf_v_addr = dma_alloc_coherent(&data->pdev->dev, + rxq->count * BTINTEL_PCIE_BUFFER_SIZE, + &rxq->buf_p_addr, + GFP_KERNEL | __GFP_NOWARN); + if (!rxq->buf_v_addr) { + kfree(rxq->bufs); + return -ENOMEM; + } + memset(rxq->buf_v_addr, 0, rxq->count * BTINTEL_PCIE_BUFFER_SIZE); + + /* Setup the allocated DMA buffer to bufs. Each data_buf should + * have virtual address and physical address + */ + for (i = 0; i < rxq->count; i++) { + buf = &rxq->bufs[i]; + buf->data_p_addr = rxq->buf_p_addr + (i * BTINTEL_PCIE_BUFFER_SIZE); + buf->data = rxq->buf_v_addr + (i * BTINTEL_PCIE_BUFFER_SIZE); + } + + return 0; +} + +static void btintel_pcie_setup_ia(struct btintel_pcie_data *data, + dma_addr_t p_addr, void *v_addr, + struct ia *ia) +{ + /* TR Head Index Array */ + ia->tr_hia_p_addr = p_addr; + ia->tr_hia = v_addr; + + /* TR Tail Index Array */ + ia->tr_tia_p_addr = p_addr + sizeof(u16) * BTINTEL_PCIE_NUM_QUEUES; + ia->tr_tia = v_addr + sizeof(u16) * BTINTEL_PCIE_NUM_QUEUES; + + /* CR Head index Array */ + ia->cr_hia_p_addr = p_addr + (sizeof(u16) * BTINTEL_PCIE_NUM_QUEUES * 2); + ia->cr_hia = v_addr + (sizeof(u16) * BTINTEL_PCIE_NUM_QUEUES * 2); + + /* CR Tail Index Array */ + ia->cr_tia_p_addr = p_addr + (sizeof(u16) * BTINTEL_PCIE_NUM_QUEUES * 3); + ia->cr_tia = v_addr + (sizeof(u16) * BTINTEL_PCIE_NUM_QUEUES * 3); +} + +static void btintel_pcie_free(struct btintel_pcie_data *data) +{ + btintel_pcie_free_rxq_bufs(data, &data->rxq); + btintel_pcie_free_txq_bufs(data, &data->txq); + + dma_pool_free(data->dma_pool, data->dma_v_addr, data->dma_p_addr); + dma_pool_destroy(data->dma_pool); +} + +/* Allocate tx and rx queues, any related data structures and buffers. + */ +static int btintel_pcie_alloc(struct btintel_pcie_data *data) +{ + int err = 0; + size_t total; + dma_addr_t p_addr; + void *v_addr; + + /* Allocate the chunk of DMA memory for descriptors, index array, and + * context information, instead of allocating individually. + * The DMA memory for data buffer is allocated while setting up the + * each queue. + * + * Total size is sum of the following + * + size of TFD * Number of descriptors in queue + * + size of URBD0 * Number of descriptors in queue + * + size of FRBD * Number of descriptors in queue + * + size of URBD1 * Number of descriptors in queue + * + size of index * Number of queues(2) * type of index array(4) + * + size of context information + */ + total = (sizeof(struct tfd) + sizeof(struct urbd0) + sizeof(struct frbd) + + sizeof(struct urbd1)) * BTINTEL_DESCS_COUNT; + + /* Add the sum of size of index array and size of ci struct */ + total += (sizeof(u16) * BTINTEL_PCIE_NUM_QUEUES * 4) + sizeof(struct ctx_info); + + /* Allocate DMA Pool */ + data->dma_pool = dma_pool_create(KBUILD_MODNAME, &data->pdev->dev, + total, BTINTEL_PCIE_DMA_POOL_ALIGNMENT, 0); + if (!data->dma_pool) { + err = -ENOMEM; + goto exit_error; + } + + v_addr = dma_pool_zalloc(data->dma_pool, GFP_KERNEL | __GFP_NOWARN, + &p_addr); + if (!v_addr) { + dma_pool_destroy(data->dma_pool); + err = -ENOMEM; + goto exit_error; + } + + data->dma_p_addr = p_addr; + data->dma_v_addr = v_addr; + + /* Setup descriptor count */ + data->txq.count = BTINTEL_DESCS_COUNT; + data->rxq.count = BTINTEL_DESCS_COUNT; + + /* Setup tfds */ + data->txq.tfds_p_addr = p_addr; + data->txq.tfds = v_addr; + + p_addr += (sizeof(struct tfd) * BTINTEL_DESCS_COUNT); + v_addr += (sizeof(struct tfd) * BTINTEL_DESCS_COUNT); + + /* Setup urbd0 */ + data->txq.urbd0s_p_addr = p_addr; + data->txq.urbd0s = v_addr; + + p_addr += (sizeof(struct urbd0) * BTINTEL_DESCS_COUNT); + v_addr += (sizeof(struct urbd0) * BTINTEL_DESCS_COUNT); + + /* Setup FRBD*/ + data->rxq.frbds_p_addr = p_addr; + data->rxq.frbds = v_addr; + + p_addr += (sizeof(struct frbd) * BTINTEL_DESCS_COUNT); + v_addr += (sizeof(struct frbd) * BTINTEL_DESCS_COUNT); + + /* Setup urbd1 */ + data->rxq.urbd1s_p_addr = p_addr; + data->rxq.urbd1s = v_addr; + + p_addr += (sizeof(struct urbd1) * BTINTEL_DESCS_COUNT); + v_addr += (sizeof(struct urbd1) * BTINTEL_DESCS_COUNT); + + /* Setup data buffers for txq */ + err = btintel_pcie_setup_txq_bufs(data, &data->txq); + if (err) + goto exit_error_pool; + + /* Setup data buffers for rxq */ + err = btintel_pcie_setup_rxq_bufs(data, &data->rxq); + if (err) + goto exit_error_txq; + + /* Setup Index Array */ + btintel_pcie_setup_ia(data, p_addr, v_addr, &data->ia); + + /* Setup Context Information */ + p_addr += sizeof(u16) * BTINTEL_PCIE_NUM_QUEUES * 4; + v_addr += sizeof(u16) * BTINTEL_PCIE_NUM_QUEUES * 4; + + data->ci = v_addr; + data->ci_p_addr = p_addr; + + /* Initialize the CI */ + btintel_pcie_init_ci(data, data->ci); + + return 0; + +exit_error_txq: + btintel_pcie_free_txq_bufs(data, &data->txq); +exit_error_pool: + dma_pool_free(data->dma_pool, data->dma_v_addr, data->dma_p_addr); + dma_pool_destroy(data->dma_pool); +exit_error: + return err; +} + +static int btintel_pcie_open(struct hci_dev *hdev) +{ + bt_dev_dbg(hdev, ""); + + return 0; +} + +static int btintel_pcie_close(struct hci_dev *hdev) +{ + bt_dev_dbg(hdev, ""); + + return 0; +} + +static int btintel_pcie_inject_cmd_complete(struct hci_dev *hdev, __u16 opcode) +{ + struct sk_buff *skb; + struct hci_event_hdr *hdr; + struct hci_ev_cmd_complete *evt; + + skb = bt_skb_alloc(sizeof(*hdr) + sizeof(*evt) + 1, GFP_KERNEL); + if (!skb) + return -ENOMEM; + + hdr = (struct hci_event_hdr *)skb_put(skb, sizeof(*hdr)); + hdr->evt = HCI_EV_CMD_COMPLETE; + hdr->plen = sizeof(*evt) + 1; + + evt = (struct hci_ev_cmd_complete *)skb_put(skb, sizeof(*evt)); + evt->ncmd = 0x01; + evt->opcode = cpu_to_le16(opcode); + + *(u8 *)skb_put(skb, 1) = 0x00; + + hci_skb_pkt_type(skb) = HCI_EVENT_PKT; + + return hci_recv_frame(hdev, skb); +} + +static int btintel_pcie_send_frame(struct hci_dev *hdev, + struct sk_buff *skb) +{ + struct btintel_pcie_data *data = hci_get_drvdata(hdev); + int ret; + u32 type; + + /* Due to the fw limitation, the type header of the packet should be + * 4 bytes unlike 1 byte for UART. In UART, the firmware can read + * the first byte to get the packet type and redirect the rest of data + * packet to the right handler. + * + * But for PCIe, THF(Transfer Flow Handler) fetches the 4 bytes of data + * from DMA memory and by the time it reads the first 4 bytes, it has + * already consumed some part of packet. Thus the packet type indicator + * for iBT PCIe is 4 bytes. + * + * Luckily, when HCI core creates the skb, it allocates 8 bytes of + * head room for profile and driver use, and before sending the data + * to the device, append the iBT PCIe packet type in the front. + */ + switch (hci_skb_pkt_type(skb)) { + case HCI_COMMAND_PKT: + type = BTINTEL_PCIE_HCI_CMD_PKT; + if (btintel_test_flag(hdev, INTEL_BOOTLOADER)) { + struct hci_command_hdr *cmd = (void *)skb->data; + __u16 opcode = le16_to_cpu(cmd->opcode); + + /* When the 0xfc01 command is issued to boot into + * the operational firmware, it will actually not + * send a command complete event. To keep the flow + * control working inject that event here. + */ + if (opcode == 0xfc01) + btintel_pcie_inject_cmd_complete(hdev, opcode); + } + hdev->stat.cmd_tx++; + break; + case HCI_ACLDATA_PKT: + type = BTINTEL_PCIE_HCI_ACL_PKT; + hdev->stat.acl_tx++; + break; + case HCI_SCODATA_PKT: + type = BTINTEL_PCIE_HCI_SCO_PKT; + hdev->stat.sco_tx++; + break; + default: + bt_dev_err(hdev, "Unknown HCI packet type"); + return -EILSEQ; + } + memcpy(skb_push(skb, BTINTEL_PCIE_HCI_TYPE_LEN), &type, + BTINTEL_PCIE_HCI_TYPE_LEN); + + ret = btintel_pcie_send_sync(data, skb); + if (ret) { + hdev->stat.err_tx++; + bt_dev_err(hdev, "Failed to send frame (%d)", ret); + goto exit_error; + } + hdev->stat.byte_tx += skb->len; + kfree_skb(skb); + +exit_error: + return ret; +} + +static void btintel_pcie_release_hdev(struct btintel_pcie_data *data) +{ + struct hci_dev *hdev; + + hdev = data->hdev; + hci_unregister_dev(hdev); + hci_free_dev(hdev); + data->hdev = NULL; +} + +static int btintel_pcie_setup(struct hci_dev *hdev) +{ + const u8 param[1] = { 0xFF }; + struct intel_version_tlv ver_tlv; + struct sk_buff *skb; + int err; + + BT_DBG("%s", hdev->name); + + skb = __hci_cmd_sync(hdev, 0xfc05, 1, param, HCI_CMD_TIMEOUT); + if (IS_ERR(skb)) { + bt_dev_err(hdev, "Reading Intel version command failed (%ld)", + PTR_ERR(skb)); + return PTR_ERR(skb); + } + + /* Check the status */ + if (skb->data[0]) { + bt_dev_err(hdev, "Intel Read Version command failed (%02x)", + skb->data[0]); + err = -EIO; + goto exit_error; + } + + /* Apply the common HCI quirks for Intel device */ + set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks); + set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks); + set_bit(HCI_QUIRK_NON_PERSISTENT_DIAG, &hdev->quirks); + + /* Set up the quality report callback for Intel devices */ + hdev->set_quality_report = btintel_set_quality_report; + + memset(&ver_tlv, 0, sizeof(ver_tlv)); + /* For TLV type device, parse the tlv data */ + err = btintel_parse_version_tlv(hdev, &ver_tlv, skb); + if (err) { + bt_dev_err(hdev, "Failed to parse TLV version information"); + goto exit_error; + } + + switch (INTEL_HW_PLATFORM(ver_tlv.cnvi_bt)) { + case 0x37: + break; + default: + bt_dev_err(hdev, "Unsupported Intel hardware platform (0x%2x)", + INTEL_HW_PLATFORM(ver_tlv.cnvi_bt)); + err = -EINVAL; + goto exit_error; + } + + /* Check for supported iBT hardware variants of this firmware + * loading method. + * + * This check has been put in place to ensure correct forward + * compatibility options when newer hardware variants come + * along. + */ + switch (INTEL_HW_VARIANT(ver_tlv.cnvi_bt)) { + case 0x1e: /* BzrI */ + /* Display version information of TLV type */ + btintel_version_info_tlv(hdev, &ver_tlv); + + /* Apply the device specific HCI quirks for TLV based devices + * + * All TLV based devices support WBS + */ + set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks); + + /* Apply LE States quirk from solar onwards */ + set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks); + + /* Setup MSFT Extension support */ + btintel_set_msft_opcode(hdev, + INTEL_HW_VARIANT(ver_tlv.cnvi_bt)); + + err = btintel_bootloader_setup_tlv(hdev, &ver_tlv); + if (err) + goto exit_error; + break; + default: + bt_dev_err(hdev, "Unsupported Intel hw variant (%u)", + INTEL_HW_VARIANT(ver_tlv.cnvi_bt)); + err = -EINVAL; + break; + } + +exit_error: + kfree_skb(skb); + + return err; +} + +static int btintel_pcie_setup_hdev(struct btintel_pcie_data *data) +{ + int err; + struct hci_dev *hdev; + + hdev = hci_alloc_dev(); + if (!hdev) + return -ENOMEM; + + hdev->bus = HCI_PCI; + hci_set_drvdata(hdev, data); + + data->hdev = hdev; + SET_HCIDEV_DEV(hdev, &data->pdev->dev); + + hdev->manufacturer = 2; + hdev->open = btintel_pcie_open; + hdev->close = btintel_pcie_close; + hdev->send = btintel_pcie_send_frame; + hdev->setup = btintel_pcie_setup; + hdev->shutdown = btintel_shutdown_combined; + hdev->hw_error = btintel_hw_error; + hdev->set_diag = btintel_set_diag; + hdev->set_bdaddr = btintel_set_bdaddr; + + err = hci_register_dev(hdev); + if (err < 0) { + BT_ERR("Failed to register to hdev (%d)", err); + goto exit_error; + } + + return 0; + +exit_error: + hci_free_dev(hdev); + return err; +} + +static int btintel_pcie_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + int err; + struct btintel_pcie_data *data; + + if (!pdev) + return -ENODEV; + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->pdev = pdev; + + spin_lock_init(&data->irq_lock); + spin_lock_init(&data->hci_rx_lock); + + init_waitqueue_head(&data->gp0_wait_q); + data->gp0_received = false; + + init_waitqueue_head(&data->tx_wait_q); + data->tx_wait_done = false; + + data->workqueue = alloc_ordered_workqueue(KBUILD_MODNAME, WQ_HIGHPRI); + if (!data->workqueue) + return -ENOMEM; + + skb_queue_head_init(&data->rx_skb_q); + INIT_WORK(&data->rx_work, btintel_pcie_rx_work); + + data->boot_stage_cache = 0x00; + data->img_resp_cache = 0x00; + + err = btintel_pcie_config_pcie(pdev, data); + if (err) + goto exit_error; + + pci_set_drvdata(pdev, data); + + err = btintel_pcie_alloc(data); + if (err) + goto exit_error; + + err = btintel_pcie_enable_bt(data); + if (err) + goto exit_error; + + /* CNV information (CNVi and CNVr) is in CSR */ + data->cnvi = btintel_pcie_rd_reg32(data, BTINTEL_PCIE_CSR_HW_REV_REG); + + data->cnvr = btintel_pcie_rd_reg32(data, BTINTEL_PCIE_CSR_RF_ID_REG); + + err = btintel_pcie_start_rx(data); + if (err) + goto exit_error; + + err = btintel_pcie_setup_hdev(data); + if (err) + goto exit_error; + + bt_dev_dbg(data->hdev, "cnvi: 0x%8.8x cnvr: 0x%8.8x", data->cnvi, + data->cnvr); + return 0; + +exit_error: + /* reset device before exit */ + btintel_pcie_reset_bt(data); + + pci_clear_master(pdev); + + pci_set_drvdata(pdev, NULL); + + return err; +} + +static void btintel_pcie_remove(struct pci_dev *pdev) +{ + struct btintel_pcie_data *data; + + data = pci_get_drvdata(pdev); + + btintel_pcie_reset_bt(data); + + pci_free_irq_vectors(pdev); + + btintel_pcie_release_hdev(data); + + flush_work(&data->rx_work); + + destroy_workqueue(data->workqueue); + + btintel_pcie_free(data); + + pci_clear_master(pdev); + + pci_set_drvdata(pdev, NULL); +} + +static struct pci_driver btintel_pcie_driver = { + .name = KBUILD_MODNAME, + .id_table = btintel_pcie_table, + .probe = btintel_pcie_probe, + .remove = btintel_pcie_remove, +}; +module_pci_driver(btintel_pcie_driver); + +MODULE_AUTHOR("Tedd Ho-Jeong An <[email protected]>"); +MODULE_DESCRIPTION("Intel Bluetooth PCIe transport driver ver " VERSION); +MODULE_VERSION(VERSION); +MODULE_LICENSE("GPL"); |