1 files changed, 139 insertions, 0 deletions
diff --git a/arch/x86/mm/cpu_entry_area.c b/arch/x86/mm/cpu_entry_area.c
new file mode 100644
index 000000000000..fe814fd5e014
--- /dev/null
+++ b/arch/x86/mm/cpu_entry_area.c
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/spinlock.h>
+#include <linux/percpu.h>
+
+#include <asm/cpu_entry_area.h>
+#include <asm/pgtable.h>
+#include <asm/fixmap.h>
+#include <asm/desc.h>
+
+static DEFINE_PER_CPU_PAGE_ALIGNED(struct entry_stack_page, entry_stack_storage);
+
+#ifdef CONFIG_X86_64
+static DEFINE_PER_CPU_PAGE_ALIGNED(char, exception_stacks
+	[(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ + DEBUG_STKSZ]);
+#endif
+
+struct cpu_entry_area *get_cpu_entry_area(int cpu)
+{
+	unsigned long va = CPU_ENTRY_AREA_PER_CPU + cpu * CPU_ENTRY_AREA_SIZE;
+	BUILD_BUG_ON(sizeof(struct cpu_entry_area) % PAGE_SIZE != 0);
+
+	return (struct cpu_entry_area *) va;
+}
+EXPORT_SYMBOL(get_cpu_entry_area);
+
+void cea_set_pte(void *cea_vaddr, phys_addr_t pa, pgprot_t flags)
+{
+	unsigned long va = (unsigned long) cea_vaddr;
+
+	set_pte_vaddr(va, pfn_pte(pa >> PAGE_SHIFT, flags));
+}
+
+static void __init
+cea_map_percpu_pages(void *cea_vaddr, void *ptr, int pages, pgprot_t prot)
+{
+	for ( ; pages; pages--, cea_vaddr+= PAGE_SIZE, ptr += PAGE_SIZE)
+		cea_set_pte(cea_vaddr, per_cpu_ptr_to_phys(ptr), prot);
+}
+
+/* Setup the fixmap mappings only once per-processor */
+static void __init setup_cpu_entry_area(int cpu)
+{
+#ifdef CONFIG_X86_64
+	extern char _entry_trampoline[];
+
+	/* On 64-bit systems, we use a read-only fixmap GDT and TSS. */
+	pgprot_t gdt_prot = PAGE_KERNEL_RO;
+	pgprot_t tss_prot = PAGE_KERNEL_RO;
+#else
+	/*
+	 * On native 32-bit systems, the GDT cannot be read-only because
+	 * our double fault handler uses a task gate, and entering through
+	 * a task gate needs to change an available TSS to busy.  If the
+	 * GDT is read-only, that will triple fault.  The TSS cannot be
+	 * read-only because the CPU writes to it on task switches.
+	 *
+	 * On Xen PV, the GDT must be read-only because the hypervisor
+	 * requires it.
+	 */
+	pgprot_t gdt_prot = boot_cpu_has(X86_FEATURE_XENPV) ?
+		PAGE_KERNEL_RO : PAGE_KERNEL;
+	pgprot_t tss_prot = PAGE_KERNEL;
+#endif
+
+	cea_set_pte(&get_cpu_entry_area(cpu)->gdt, get_cpu_gdt_paddr(cpu),
+		    gdt_prot);
+
+	cea_map_percpu_pages(&get_cpu_entry_area(cpu)->entry_stack_page,
+			     per_cpu_ptr(&entry_stack_storage, cpu), 1,
+			     PAGE_KERNEL);
+
+	/*
+	 * The Intel SDM says (Volume 3, 7.2.1):
+	 *
+	 *  Avoid placing a page boundary in the part of the TSS that the
+	 *  processor reads during a task switch (the first 104 bytes). The
+	 *  processor may not correctly perform address translations if a
+	 *  boundary occurs in this area. During a task switch, the processor
+	 *  reads and writes into the first 104 bytes of each TSS (using
+	 *  contiguous physical addresses beginning with the physical address
+	 *  of the first byte of the TSS). So, after TSS access begins, if
+	 *  part of the 104 bytes is not physically contiguous, the processor
+	 *  will access incorrect information without generating a page-fault
+	 *  exception.
+	 *
+	 * There are also a lot of errata involving the TSS spanning a page
+	 * boundary.  Assert that we're not doing that.
+	 */
+	BUILD_BUG_ON((offsetof(struct tss_struct, x86_tss) ^
+		      offsetofend(struct tss_struct, x86_tss)) & PAGE_MASK);
+	BUILD_BUG_ON(sizeof(struct tss_struct) % PAGE_SIZE != 0);
+	cea_map_percpu_pages(&get_cpu_entry_area(cpu)->tss,
+			     &per_cpu(cpu_tss_rw, cpu),
+			     sizeof(struct tss_struct) / PAGE_SIZE, tss_prot);
+
+#ifdef CONFIG_X86_32
+	per_cpu(cpu_entry_area, cpu) = get_cpu_entry_area(cpu);
+#endif
+
+#ifdef CONFIG_X86_64
+	BUILD_BUG_ON(sizeof(exception_stacks) % PAGE_SIZE != 0);
+	BUILD_BUG_ON(sizeof(exception_stacks) !=
+		     sizeof(((struct cpu_entry_area *)0)->exception_stacks));
+	cea_map_percpu_pages(&get_cpu_entry_area(cpu)->exception_stacks,
+			     &per_cpu(exception_stacks, cpu),
+			     sizeof(exception_stacks) / PAGE_SIZE, PAGE_KERNEL);
+
+	cea_set_pte(&get_cpu_entry_area(cpu)->entry_trampoline,
+		     __pa_symbol(_entry_trampoline), PAGE_KERNEL_RX);
+#endif
+}
+
+static __init void setup_cpu_entry_area_ptes(void)
+{
+#ifdef CONFIG_X86_32
+	unsigned long start, end;
+
+	BUILD_BUG_ON(CPU_ENTRY_AREA_PAGES * PAGE_SIZE < CPU_ENTRY_AREA_MAP_SIZE);
+	BUG_ON(CPU_ENTRY_AREA_BASE & ~PMD_MASK);
+
+	start = CPU_ENTRY_AREA_BASE;
+	end = start + CPU_ENTRY_AREA_MAP_SIZE;
+
+	/* Careful here: start + PMD_SIZE might wrap around */
+	for (; start < end && start >= CPU_ENTRY_AREA_BASE; start += PMD_SIZE)
+		populate_extra_pte(start);
+#endif
+}
+
+void __init setup_cpu_entry_areas(void)
+{
+	unsigned int cpu;
+
+	setup_cpu_entry_area_ptes();
+
+	for_each_possible_cpu(cpu)
+		setup_cpu_entry_area(cpu);
+}