diff options
Diffstat (limited to 'arch/x86/kernel/setup.c')
| -rw-r--r-- | arch/x86/kernel/setup.c | 186 |
1 files changed, 103 insertions, 83 deletions
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 2a34f9c5be21..c4851eff57b3 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -55,7 +55,6 @@ #include <linux/stddef.h> #include <linux/unistd.h> #include <linux/ptrace.h> -#include <linux/slab.h> #include <linux/user.h> #include <linux/delay.h> @@ -73,6 +72,7 @@ #include <asm/mtrr.h> #include <asm/apic.h> +#include <asm/trampoline.h> #include <asm/e820.h> #include <asm/mpspec.h> #include <asm/setup.h> @@ -106,9 +106,11 @@ #include <asm/percpu.h> #include <asm/topology.h> #include <asm/apicdef.h> +#include <asm/k8.h> #ifdef CONFIG_X86_64 #include <asm/numa_64.h> #endif +#include <asm/mce.h> /* * end_pfn only includes RAM, while max_pfn_mapped includes all e820 entries. @@ -118,7 +120,9 @@ unsigned long max_low_pfn_mapped; unsigned long max_pfn_mapped; +#ifdef CONFIG_DMI RESERVE_BRK(dmi_alloc, 65536); +#endif unsigned int boot_cpu_id __read_mostly; @@ -247,7 +251,7 @@ EXPORT_SYMBOL(edd); * from boot_params into a safe place. * */ -static inline void copy_edd(void) +static inline void __init copy_edd(void) { memcpy(edd.mbr_signature, boot_params.edd_mbr_sig_buffer, sizeof(edd.mbr_signature)); @@ -256,7 +260,7 @@ static inline void copy_edd(void) edd.edd_info_nr = boot_params.eddbuf_entries; } #else -static inline void copy_edd(void) +static inline void __init copy_edd(void) { } #endif @@ -309,16 +313,17 @@ static void __init reserve_brk(void) #define MAX_MAP_CHUNK (NR_FIX_BTMAPS << PAGE_SHIFT) static void __init relocate_initrd(void) { - + /* Assume only end is not page aligned */ u64 ramdisk_image = boot_params.hdr.ramdisk_image; u64 ramdisk_size = boot_params.hdr.ramdisk_size; + u64 area_size = PAGE_ALIGN(ramdisk_size); u64 end_of_lowmem = max_low_pfn_mapped << PAGE_SHIFT; u64 ramdisk_here; unsigned long slop, clen, mapaddr; char *p, *q; /* We need to move the initrd down into lowmem */ - ramdisk_here = find_e820_area(0, end_of_lowmem, ramdisk_size, + ramdisk_here = find_e820_area(0, end_of_lowmem, area_size, PAGE_SIZE); if (ramdisk_here == -1ULL) @@ -327,7 +332,7 @@ static void __init relocate_initrd(void) /* Note: this includes all the lowmem currently occupied by the initrd, we rely on that fact to keep the data intact. */ - reserve_early(ramdisk_here, ramdisk_here + ramdisk_size, + reserve_early(ramdisk_here, ramdisk_here + area_size, "NEW RAMDISK"); initrd_start = ramdisk_here + PAGE_OFFSET; initrd_end = initrd_start + ramdisk_size; @@ -371,9 +376,10 @@ static void __init relocate_initrd(void) static void __init reserve_initrd(void) { + /* Assume only end is not page aligned */ u64 ramdisk_image = boot_params.hdr.ramdisk_image; u64 ramdisk_size = boot_params.hdr.ramdisk_size; - u64 ramdisk_end = ramdisk_image + ramdisk_size; + u64 ramdisk_end = PAGE_ALIGN(ramdisk_image + ramdisk_size); u64 end_of_lowmem = max_low_pfn_mapped << PAGE_SHIFT; if (!boot_params.hdr.type_of_loader || @@ -486,42 +492,11 @@ static void __init reserve_early_setup_data(void) #ifdef CONFIG_KEXEC -/** - * Reserve @size bytes of crashkernel memory at any suitable offset. - * - * @size: Size of the crashkernel memory to reserve. - * Returns the base address on success, and -1ULL on failure. - */ -static -unsigned long long __init find_and_reserve_crashkernel(unsigned long long size) -{ - const unsigned long long alignment = 16<<20; /* 16M */ - unsigned long long start = 0LL; - - while (1) { - int ret; - - start = find_e820_area(start, ULONG_MAX, size, alignment); - if (start == -1ULL) - return start; - - /* try to reserve it */ - ret = reserve_bootmem_generic(start, size, BOOTMEM_EXCLUSIVE); - if (ret >= 0) - return start; - - start += alignment; - } -} - static inline unsigned long long get_total_mem(void) { unsigned long long total; - total = max_low_pfn - min_low_pfn; -#ifdef CONFIG_HIGHMEM - total += highend_pfn - highstart_pfn; -#endif + total = max_pfn - min_low_pfn; return total << PAGE_SHIFT; } @@ -541,21 +516,25 @@ static void __init reserve_crashkernel(void) /* 0 means: find the address automatically */ if (crash_base <= 0) { - crash_base = find_and_reserve_crashkernel(crash_size); + const unsigned long long alignment = 16<<20; /* 16M */ + + crash_base = find_e820_area(alignment, ULONG_MAX, crash_size, + alignment); if (crash_base == -1ULL) { - pr_info("crashkernel reservation failed. " - "No suitable area found.\n"); + pr_info("crashkernel reservation failed - No suitable area found.\n"); return; } } else { - ret = reserve_bootmem_generic(crash_base, crash_size, - BOOTMEM_EXCLUSIVE); - if (ret < 0) { - pr_info("crashkernel reservation failed - " - "memory is in use\n"); + unsigned long long start; + + start = find_e820_area(crash_base, ULONG_MAX, crash_size, + 1<<20); + if (start != crash_base) { + pr_info("crashkernel reservation failed - memory is in use.\n"); return; } } + reserve_early(crash_base, crash_base + crash_size, "CRASH KERNEL"); printk(KERN_INFO "Reserving %ldMB of memory at %ldMB " "for crashkernel (System RAM: %ldMB)\n", @@ -628,6 +607,16 @@ static int __init setup_elfcorehdr(char *arg) early_param("elfcorehdr", setup_elfcorehdr); #endif +static __init void reserve_ibft_region(void) +{ + unsigned long addr, size = 0; + + addr = find_ibft_region(&size); + + if (size) + reserve_early_overlap_ok(addr, addr + size, "ibft"); +} + #ifdef CONFIG_X86_RESERVE_LOW_64K static int __init dmi_low_memory_corruption(const struct dmi_system_id *d) { @@ -666,23 +655,48 @@ static struct dmi_system_id __initdata bad_bios_dmi_table[] = { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix/MSC"), }, }, - { /* - * AMI BIOS with low memory corruption was found on Intel DG45ID board. - * It hase different DMI_BIOS_VENDOR = "Intel Corp.", for now we will + * AMI BIOS with low memory corruption was found on Intel DG45ID and + * DG45FC boards. + * It has a different DMI_BIOS_VENDOR = "Intel Corp.", for now we will * match only DMI_BOARD_NAME and see if there is more bad products * with this vendor. */ + { .callback = dmi_low_memory_corruption, .ident = "AMI BIOS", .matches = { DMI_MATCH(DMI_BOARD_NAME, "DG45ID"), }, }, + { + .callback = dmi_low_memory_corruption, + .ident = "AMI BIOS", + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "DG45FC"), + }, + }, #endif {} }; +static void __init trim_bios_range(void) +{ + /* + * A special case is the first 4Kb of memory; + * This is a BIOS owned area, not kernel ram, but generally + * not listed as such in the E820 table. + */ + e820_update_range(0, PAGE_SIZE, E820_RAM, E820_RESERVED); + /* + * special case: Some BIOSen report the PC BIOS + * area (640->1Mb) as ram even though it is not. + * take them out. + */ + e820_remove_range(BIOS_BEGIN, BIOS_END - BIOS_BEGIN, E820_RAM, 1); + sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map); +} + /* * Determine if we were loaded by an EFI loader. If so, then we have also been * passed the efi memmap, systab, etc., so we should use these data structures @@ -698,6 +712,9 @@ static struct dmi_system_id __initdata bad_bios_dmi_table[] = { void __init setup_arch(char **cmdline_p) { + int acpi = 0; + int k8 = 0; + #ifdef CONFIG_X86_32 memcpy(&boot_cpu_data, &new_cpu_data, sizeof(new_cpu_data)); visws_early_detect(); @@ -790,21 +807,18 @@ void __init setup_arch(char **cmdline_p) strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE); *cmdline_p = command_line; -#ifdef CONFIG_X86_64 /* - * Must call this twice: Once just to detect whether hardware doesn't - * support NX (so that the early EHCI debug console setup can safely - * call set_fixmap(), and then again after parsing early parameters to - * honor the respective command line option. + * x86_configure_nx() is called before parse_early_param() to detect + * whether hardware doesn't support NX (so that the early EHCI debug + * console setup can safely call set_fixmap()). It may then be called + * again from within noexec_setup() during parsing early parameters + * to honor the respective command line option. */ - check_efer(); -#endif + x86_configure_nx(); parse_early_param(); -#ifdef CONFIG_X86_64 - check_efer(); -#endif + x86_report_nx(); /* Must be before kernel pagetables are setup */ vmi_activate(); @@ -846,7 +860,7 @@ void __init setup_arch(char **cmdline_p) insert_resource(&iomem_resource, &data_resource); insert_resource(&iomem_resource, &bss_resource); - + trim_bios_range(); #ifdef CONFIG_X86_32 if (ppro_with_ram_bug()) { e820_update_range(0x70000000ULL, 0x40000ULL, E820_RAM, @@ -900,6 +914,22 @@ void __init setup_arch(char **cmdline_p) reserve_brk(); + /* + * Find and reserve possible boot-time SMP configuration: + */ + find_smp_config(); + + reserve_ibft_region(); + + reserve_trampoline_memory(); + +#ifdef CONFIG_ACPI_SLEEP + /* + * Reserve low memory region for sleep support. + * even before init_memory_mapping + */ + acpi_reserve_wakeup_memory(); +#endif init_gbpages(); /* max_pfn_mapped is updated here */ @@ -926,6 +956,8 @@ void __init setup_arch(char **cmdline_p) reserve_initrd(); + reserve_crashkernel(); + vsmp_init(); io_delay_init(); @@ -941,34 +973,20 @@ void __init setup_arch(char **cmdline_p) /* * Parse SRAT to discover nodes. */ - acpi_numa_init(); + acpi = acpi_numa_init(); #endif - initmem_init(0, max_pfn); - -#ifdef CONFIG_ACPI_SLEEP - /* - * Reserve low memory region for sleep support. - */ - acpi_reserve_bootmem(); +#ifdef CONFIG_K8_NUMA + if (!acpi) + k8 = !k8_numa_init(0, max_pfn); #endif - /* - * Find and reserve possible boot-time SMP configuration: - */ - find_smp_config(); - reserve_crashkernel(); - -#ifdef CONFIG_X86_64 - /* - * dma32_reserve_bootmem() allocates bootmem which may conflict - * with the crashkernel command line, so do that after - * reserve_crashkernel() - */ - dma32_reserve_bootmem(); + initmem_init(0, max_pfn, acpi, k8); +#ifndef CONFIG_NO_BOOTMEM + early_res_to_bootmem(0, max_low_pfn<<PAGE_SHIFT); #endif - reserve_ibft_region(); + dma32_reserve_bootmem(); #ifdef CONFIG_KVM_CLOCK kvmclock_init(); @@ -1031,6 +1049,8 @@ void __init setup_arch(char **cmdline_p) #endif #endif x86_init.oem.banner(); + + mcheck_init(); } #ifdef CONFIG_X86_32 |