diff options
Diffstat (limited to 'arch/sh/boards/mach-cayman/setup.c')
| -rw-r--r-- | arch/sh/boards/mach-cayman/setup.c | 181 |
1 files changed, 0 insertions, 181 deletions
diff --git a/arch/sh/boards/mach-cayman/setup.c b/arch/sh/boards/mach-cayman/setup.c deleted file mode 100644 index 8ef76e288da0..000000000000 --- a/arch/sh/boards/mach-cayman/setup.c +++ /dev/null @@ -1,181 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * arch/sh/mach-cayman/setup.c - * - * SH5 Cayman support - * - * Copyright (C) 2002 David J. Mckay & Benedict Gaster - * Copyright (C) 2003 - 2007 Paul Mundt - */ -#include <linux/init.h> -#include <linux/io.h> -#include <linux/kernel.h> -#include <cpu/irq.h> - -/* - * Platform Dependent Interrupt Priorities. - */ - -/* Using defaults defined in irq.h */ -#define RES NO_PRIORITY /* Disabled */ -#define IR0 IRL0_PRIORITY /* IRLs */ -#define IR1 IRL1_PRIORITY -#define IR2 IRL2_PRIORITY -#define IR3 IRL3_PRIORITY -#define PCA INTA_PRIORITY /* PCI Ints */ -#define PCB INTB_PRIORITY -#define PCC INTC_PRIORITY -#define PCD INTD_PRIORITY -#define SER TOP_PRIORITY -#define ERR TOP_PRIORITY -#define PW0 TOP_PRIORITY -#define PW1 TOP_PRIORITY -#define PW2 TOP_PRIORITY -#define PW3 TOP_PRIORITY -#define DM0 NO_PRIORITY /* DMA Ints */ -#define DM1 NO_PRIORITY -#define DM2 NO_PRIORITY -#define DM3 NO_PRIORITY -#define DAE NO_PRIORITY -#define TU0 TIMER_PRIORITY /* TMU Ints */ -#define TU1 NO_PRIORITY -#define TU2 NO_PRIORITY -#define TI2 NO_PRIORITY -#define ATI NO_PRIORITY /* RTC Ints */ -#define PRI NO_PRIORITY -#define CUI RTC_PRIORITY -#define ERI SCIF_PRIORITY /* SCIF Ints */ -#define RXI SCIF_PRIORITY -#define BRI SCIF_PRIORITY -#define TXI SCIF_PRIORITY -#define ITI TOP_PRIORITY /* WDT Ints */ - -/* Setup for the SMSC FDC37C935 */ -#define SMSC_SUPERIO_BASE 0x04000000 -#define SMSC_CONFIG_PORT_ADDR 0x3f0 -#define SMSC_INDEX_PORT_ADDR SMSC_CONFIG_PORT_ADDR -#define SMSC_DATA_PORT_ADDR 0x3f1 - -#define SMSC_ENTER_CONFIG_KEY 0x55 -#define SMSC_EXIT_CONFIG_KEY 0xaa - -#define SMCS_LOGICAL_DEV_INDEX 0x07 -#define SMSC_DEVICE_ID_INDEX 0x20 -#define SMSC_DEVICE_REV_INDEX 0x21 -#define SMSC_ACTIVATE_INDEX 0x30 -#define SMSC_PRIMARY_BASE_INDEX 0x60 -#define SMSC_SECONDARY_BASE_INDEX 0x62 -#define SMSC_PRIMARY_INT_INDEX 0x70 -#define SMSC_SECONDARY_INT_INDEX 0x72 - -#define SMSC_IDE1_DEVICE 1 -#define SMSC_KEYBOARD_DEVICE 7 -#define SMSC_CONFIG_REGISTERS 8 - -#define SMSC_SUPERIO_READ_INDEXED(index) ({ \ - outb((index), SMSC_INDEX_PORT_ADDR); \ - inb(SMSC_DATA_PORT_ADDR); }) -#define SMSC_SUPERIO_WRITE_INDEXED(val, index) ({ \ - outb((index), SMSC_INDEX_PORT_ADDR); \ - outb((val), SMSC_DATA_PORT_ADDR); }) - -#define IDE1_PRIMARY_BASE 0x01f0 -#define IDE1_SECONDARY_BASE 0x03f6 - -unsigned long smsc_superio_virt; - -int platform_int_priority[NR_INTC_IRQS] = { - IR0, IR1, IR2, IR3, PCA, PCB, PCC, PCD, /* IRQ 0- 7 */ - RES, RES, RES, RES, SER, ERR, PW3, PW2, /* IRQ 8-15 */ - PW1, PW0, DM0, DM1, DM2, DM3, DAE, RES, /* IRQ 16-23 */ - RES, RES, RES, RES, RES, RES, RES, RES, /* IRQ 24-31 */ - TU0, TU1, TU2, TI2, ATI, PRI, CUI, ERI, /* IRQ 32-39 */ - RXI, BRI, TXI, RES, RES, RES, RES, RES, /* IRQ 40-47 */ - RES, RES, RES, RES, RES, RES, RES, RES, /* IRQ 48-55 */ - RES, RES, RES, RES, RES, RES, RES, ITI, /* IRQ 56-63 */ -}; - -static int __init smsc_superio_setup(void) -{ - unsigned char devid, devrev; - - smsc_superio_virt = (unsigned long)ioremap(SMSC_SUPERIO_BASE, 1024); - if (!smsc_superio_virt) { - panic("Unable to remap SMSC SuperIO\n"); - } - - /* Initially the chip is in run state */ - /* Put it into configuration state */ - outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR); - outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR); - - /* Read device ID info */ - devid = SMSC_SUPERIO_READ_INDEXED(SMSC_DEVICE_ID_INDEX); - devrev = SMSC_SUPERIO_READ_INDEXED(SMSC_DEVICE_REV_INDEX); - printk("SMSC SuperIO devid %02x rev %02x\n", devid, devrev); - - /* Select the keyboard device */ - SMSC_SUPERIO_WRITE_INDEXED(SMSC_KEYBOARD_DEVICE, SMCS_LOGICAL_DEV_INDEX); - - /* enable it */ - SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX); - - /* Select the interrupts */ - /* On a PC keyboard is IRQ1, mouse is IRQ12 */ - SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_PRIMARY_INT_INDEX); - SMSC_SUPERIO_WRITE_INDEXED(12, SMSC_SECONDARY_INT_INDEX); - - /* - * Only IDE1 exists on the Cayman - */ - - /* Power it on */ - SMSC_SUPERIO_WRITE_INDEXED(1 << SMSC_IDE1_DEVICE, 0x22); - - SMSC_SUPERIO_WRITE_INDEXED(SMSC_IDE1_DEVICE, SMCS_LOGICAL_DEV_INDEX); - SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX); - - SMSC_SUPERIO_WRITE_INDEXED(IDE1_PRIMARY_BASE >> 8, - SMSC_PRIMARY_BASE_INDEX + 0); - SMSC_SUPERIO_WRITE_INDEXED(IDE1_PRIMARY_BASE & 0xff, - SMSC_PRIMARY_BASE_INDEX + 1); - - SMSC_SUPERIO_WRITE_INDEXED(IDE1_SECONDARY_BASE >> 8, - SMSC_SECONDARY_BASE_INDEX + 0); - SMSC_SUPERIO_WRITE_INDEXED(IDE1_SECONDARY_BASE & 0xff, - SMSC_SECONDARY_BASE_INDEX + 1); - - SMSC_SUPERIO_WRITE_INDEXED(14, SMSC_PRIMARY_INT_INDEX); - - SMSC_SUPERIO_WRITE_INDEXED(SMSC_CONFIG_REGISTERS, - SMCS_LOGICAL_DEV_INDEX); - - SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc2); /* GP42 = nIDE1_OE */ - SMSC_SUPERIO_WRITE_INDEXED(0x01, 0xc5); /* GP45 = IDE1_IRQ */ - SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc6); /* GP46 = nIOROP */ - SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc7); /* GP47 = nIOWOP */ - - /* Exit the configuration state */ - outb(SMSC_EXIT_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR); - - return 0; -} -device_initcall(smsc_superio_setup); - -static void __iomem *cayman_ioport_map(unsigned long port, unsigned int len) -{ - if (port < 0x400) { - extern unsigned long smsc_superio_virt; - return (void __iomem *)((port << 2) | smsc_superio_virt); - } - - return (void __iomem *)port; -} - -extern void init_cayman_irq(void); - -static struct sh_machine_vector mv_cayman __initmv = { - .mv_name = "Hitachi Cayman", - .mv_ioport_map = cayman_ioport_map, - .mv_init_irq = init_cayman_irq, -}; |