diff options
Diffstat (limited to 'arch/powerpc/sysdev/fsl_pci.c')
| -rw-r--r-- | arch/powerpc/sysdev/fsl_pci.c | 47 | 
1 files changed, 23 insertions, 24 deletions
| diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c index d3a597456b6e..22d98057f773 100644 --- a/arch/powerpc/sysdev/fsl_pci.c +++ b/arch/powerpc/sysdev/fsl_pci.c @@ -202,7 +202,6 @@ static void setup_pci_atmu(struct pci_controller *hose)  	u32 pcicsrbar = 0, pcicsrbar_sz;  	u32 piwar = PIWAR_EN | PIWAR_PF | PIWAR_TGI_LOCAL |  			PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP; -	const char *name = hose->dn->full_name;  	const u64 *reg;  	int len;  	bool setup_inbound; @@ -290,12 +289,12 @@ static void setup_pci_atmu(struct pci_controller *hose)  	paddr_lo -= offset;  	if (paddr_hi == paddr_lo) { -		pr_err("%s: No outbound window space\n", name); +		pr_err("%pOF: No outbound window space\n", hose->dn);  		return;  	}  	if (paddr_lo == 0) { -		pr_err("%s: No space for inbound window\n", name); +		pr_err("%pOF: No space for inbound window\n", hose->dn);  		return;  	} @@ -313,7 +312,7 @@ static void setup_pci_atmu(struct pci_controller *hose)  	paddr_lo = min(paddr_lo, (u64)pcicsrbar); -	pr_info("%s: PCICSRBAR @ 0x%x\n", name, pcicsrbar); +	pr_info("%pOF: PCICSRBAR @ 0x%x\n", hose->dn, pcicsrbar);  	/* Setup inbound mem window */  	mem = memblock_end_of_DRAM(); @@ -336,12 +335,12 @@ static void setup_pci_atmu(struct pci_controller *hose)  		u64 address = be64_to_cpup(reg);  		if ((address >= mem) && (address < (mem + PAGE_SIZE))) { -			pr_info("%s: extending DDR ATMU to cover MSIIR", name); +			pr_info("%pOF: extending DDR ATMU to cover MSIIR", hose->dn);  			mem += PAGE_SIZE;  		} else {  			/* TODO: Create a new ATMU for MSIIR */ -			pr_warn("%s: msi-address-64 address of %llx is " -				"unsupported\n", name, address); +			pr_warn("%pOF: msi-address-64 address of %llx is " +				"unsupported\n", hose->dn, address);  		}  	} @@ -354,8 +353,8 @@ static void setup_pci_atmu(struct pci_controller *hose)  		if ((1ull << mem_log) != mem) {  			mem_log++;  			if ((1ull << mem_log) > mem) -				pr_info("%s: Setting PCI inbound window " -					"greater than memory size\n", name); +				pr_info("%pOF: Setting PCI inbound window " +					"greater than memory size\n", hose->dn);  		}  		piwar |= ((mem_log - 1) & PIWAR_SZ_MASK); @@ -402,7 +401,7 @@ static void setup_pci_atmu(struct pci_controller *hose)  			 */  			ppc_md.dma_set_mask = fsl_pci_dma_set_mask; -			pr_info("%s: Setup 64-bit PCI DMA window\n", name); +			pr_info("%pOF: Setup 64-bit PCI DMA window\n", hose->dn);  		}  	} else {  		u64 paddr = 0; @@ -443,18 +442,18 @@ static void setup_pci_atmu(struct pci_controller *hose)  #ifdef CONFIG_SWIOTLB  		ppc_swiotlb_enable = 1;  #else -		pr_err("%s: ERROR: Memory size exceeds PCI ATMU ability to " +		pr_err("%pOF: ERROR: Memory size exceeds PCI ATMU ability to "  			"map - enable CONFIG_SWIOTLB to avoid dma errors.\n", -			 name); +			 hose->dn);  #endif  		/* adjusting outbound windows could reclaim space in mem map */  		if (paddr_hi < 0xffffffffull) -			pr_warning("%s: WARNING: Outbound window cfg leaves " +			pr_warning("%pOF: WARNING: Outbound window cfg leaves "  				"gaps in memory map. Adjusting the memory map "  				"could reduce unnecessary bounce buffering.\n", -				name); +				hose->dn); -		pr_info("%s: DMA window size is 0x%llx\n", name, +		pr_info("%pOF: DMA window size is 0x%llx\n", hose->dn,  			(u64)hose->dma_window_size);  	}  } @@ -532,11 +531,11 @@ int fsl_add_bridge(struct platform_device *pdev, int is_primary)  	dev = pdev->dev.of_node;  	if (!of_device_is_available(dev)) { -		pr_warning("%s: disabled\n", dev->full_name); +		pr_warning("%pOF: disabled\n", dev);  		return -ENODEV;  	} -	pr_debug("Adding PCI host bridge %s\n", dev->full_name); +	pr_debug("Adding PCI host bridge %pOF\n", dev);  	/* Fetch host bridge registers address */  	if (of_address_to_resource(dev, 0, &rsrc)) { @@ -547,8 +546,8 @@ int fsl_add_bridge(struct platform_device *pdev, int is_primary)  	/* Get bus range if any */  	bus_range = of_get_property(dev, "bus-range", &len);  	if (bus_range == NULL || len < 2 * sizeof(int)) -		printk(KERN_WARNING "Can't get bus-range for %s, assume" -			" bus 0\n", dev->full_name); +		printk(KERN_WARNING "Can't get bus-range for %pOF, assume" +			" bus 0\n", dev);  	pci_add_flags(PCI_REASSIGN_ALL_BUS);  	hose = pcibios_alloc_controller(dev); @@ -809,11 +808,11 @@ int __init mpc83xx_add_bridge(struct device_node *dev)  	is_mpc83xx_pci = 1;  	if (!of_device_is_available(dev)) { -		pr_warning("%s: disabled by the firmware.\n", -			   dev->full_name); +		pr_warning("%pOF: disabled by the firmware.\n", +			   dev);  		return -ENODEV;  	} -	pr_debug("Adding PCI host bridge %s\n", dev->full_name); +	pr_debug("Adding PCI host bridge %pOF\n", dev);  	/* Fetch host bridge registers address */  	if (of_address_to_resource(dev, 0, &rsrc_reg)) { @@ -848,8 +847,8 @@ int __init mpc83xx_add_bridge(struct device_node *dev)  	/* Get bus range if any */  	bus_range = of_get_property(dev, "bus-range", &len);  	if (bus_range == NULL || len < 2 * sizeof(int)) { -		printk(KERN_WARNING "Can't get bus-range for %s, assume" -		       " bus 0\n", dev->full_name); +		printk(KERN_WARNING "Can't get bus-range for %pOF, assume" +		       " bus 0\n", dev);  	}  	pci_add_flags(PCI_REASSIGN_ALL_BUS); |