diff options
Diffstat (limited to 'arch/powerpc/kernel')
| -rw-r--r-- | arch/powerpc/kernel/eeh.c | 198 | ||||
| -rw-r--r-- | arch/powerpc/kernel/head_8xx.S | 1 | ||||
| -rw-r--r-- | arch/powerpc/kernel/proc_powerpc.c | 37 | ||||
| -rw-r--r-- | arch/powerpc/kernel/rtas.c | 21 | ||||
| -rw-r--r-- | arch/powerpc/kernel/setup-common.c | 5 | ||||
| -rw-r--r-- | arch/powerpc/kernel/smp.c | 11 | ||||
| -rw-r--r-- | arch/powerpc/kernel/syscalls/syscall.tbl | 4 | ||||
| -rw-r--r-- | arch/powerpc/kernel/time.c | 5 | ||||
| -rw-r--r-- | arch/powerpc/kernel/vdso.c | 20 | ||||
| -rw-r--r-- | arch/powerpc/kernel/vdso/Makefile | 2 |
10 files changed, 157 insertions, 147 deletions
diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c index 0e59b8fd9bc6..83fe99861eb1 100644 --- a/arch/powerpc/kernel/eeh.c +++ b/arch/powerpc/kernel/eeh.c @@ -1574,6 +1574,104 @@ static int proc_eeh_show(struct seq_file *m, void *v) } #endif /* CONFIG_PROC_FS */ +static int eeh_break_device(struct pci_dev *pdev) +{ + struct resource *bar = NULL; + void __iomem *mapped; + u16 old, bit; + int i, pos; + + /* Do we have an MMIO BAR to disable? */ + for (i = 0; i <= PCI_STD_RESOURCE_END; i++) { + struct resource *r = &pdev->resource[i]; + + if (!r->flags || !r->start) + continue; + if (r->flags & IORESOURCE_IO) + continue; + if (r->flags & IORESOURCE_UNSET) + continue; + + bar = r; + break; + } + + if (!bar) { + pci_err(pdev, "Unable to find Memory BAR to cause EEH with\n"); + return -ENXIO; + } + + pci_err(pdev, "Going to break: %pR\n", bar); + + if (pdev->is_virtfn) { +#ifndef CONFIG_PCI_IOV + return -ENXIO; +#else + /* + * VFs don't have a per-function COMMAND register, so the best + * we can do is clear the Memory Space Enable bit in the PF's + * SRIOV control reg. + * + * Unfortunately, this requires that we have a PF (i.e doesn't + * work for a passed-through VF) and it has the potential side + * effect of also causing an EEH on every other VF under the + * PF. Oh well. + */ + pdev = pdev->physfn; + if (!pdev) + return -ENXIO; /* passed through VFs have no PF */ + + pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_SRIOV); + pos += PCI_SRIOV_CTRL; + bit = PCI_SRIOV_CTRL_MSE; +#endif /* !CONFIG_PCI_IOV */ + } else { + bit = PCI_COMMAND_MEMORY; + pos = PCI_COMMAND; + } + + /* + * Process here is: + * + * 1. Disable Memory space. + * + * 2. Perform an MMIO to the device. This should result in an error + * (CA / UR) being raised by the device which results in an EEH + * PE freeze. Using the in_8() accessor skips the eeh detection hook + * so the freeze hook so the EEH Detection machinery won't be + * triggered here. This is to match the usual behaviour of EEH + * where the HW will asynchronously freeze a PE and it's up to + * the kernel to notice and deal with it. + * + * 3. Turn Memory space back on. This is more important for VFs + * since recovery will probably fail if we don't. For normal + * the COMMAND register is reset as a part of re-initialising + * the device. + * + * Breaking stuff is the point so who cares if it's racy ;) + */ + pci_read_config_word(pdev, pos, &old); + + mapped = ioremap(bar->start, PAGE_SIZE); + if (!mapped) { + pci_err(pdev, "Unable to map MMIO BAR %pR\n", bar); + return -ENXIO; + } + + pci_write_config_word(pdev, pos, old & ~bit); + in_8(mapped); + pci_write_config_word(pdev, pos, old); + + iounmap(mapped); + + return 0; +} + +int eeh_pe_inject_mmio_error(struct pci_dev *pdev) +{ + return eeh_break_device(pdev); +} + #ifdef CONFIG_DEBUG_FS @@ -1725,99 +1823,6 @@ static const struct file_operations eeh_dev_check_fops = { .read = eeh_debugfs_dev_usage, }; -static int eeh_debugfs_break_device(struct pci_dev *pdev) -{ - struct resource *bar = NULL; - void __iomem *mapped; - u16 old, bit; - int i, pos; - - /* Do we have an MMIO BAR to disable? */ - for (i = 0; i <= PCI_STD_RESOURCE_END; i++) { - struct resource *r = &pdev->resource[i]; - - if (!r->flags || !r->start) - continue; - if (r->flags & IORESOURCE_IO) - continue; - if (r->flags & IORESOURCE_UNSET) - continue; - - bar = r; - break; - } - - if (!bar) { - pci_err(pdev, "Unable to find Memory BAR to cause EEH with\n"); - return -ENXIO; - } - - pci_err(pdev, "Going to break: %pR\n", bar); - - if (pdev->is_virtfn) { -#ifndef CONFIG_PCI_IOV - return -ENXIO; -#else - /* - * VFs don't have a per-function COMMAND register, so the best - * we can do is clear the Memory Space Enable bit in the PF's - * SRIOV control reg. - * - * Unfortunately, this requires that we have a PF (i.e doesn't - * work for a passed-through VF) and it has the potential side - * effect of also causing an EEH on every other VF under the - * PF. Oh well. - */ - pdev = pdev->physfn; - if (!pdev) - return -ENXIO; /* passed through VFs have no PF */ - - pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_SRIOV); - pos += PCI_SRIOV_CTRL; - bit = PCI_SRIOV_CTRL_MSE; -#endif /* !CONFIG_PCI_IOV */ - } else { - bit = PCI_COMMAND_MEMORY; - pos = PCI_COMMAND; - } - - /* - * Process here is: - * - * 1. Disable Memory space. - * - * 2. Perform an MMIO to the device. This should result in an error - * (CA / UR) being raised by the device which results in an EEH - * PE freeze. Using the in_8() accessor skips the eeh detection hook - * so the freeze hook so the EEH Detection machinery won't be - * triggered here. This is to match the usual behaviour of EEH - * where the HW will asynchronously freeze a PE and it's up to - * the kernel to notice and deal with it. - * - * 3. Turn Memory space back on. This is more important for VFs - * since recovery will probably fail if we don't. For normal - * the COMMAND register is reset as a part of re-initialising - * the device. - * - * Breaking stuff is the point so who cares if it's racy ;) - */ - pci_read_config_word(pdev, pos, &old); - - mapped = ioremap(bar->start, PAGE_SIZE); - if (!mapped) { - pci_err(pdev, "Unable to map MMIO BAR %pR\n", bar); - return -ENXIO; - } - - pci_write_config_word(pdev, pos, old & ~bit); - in_8(mapped); - pci_write_config_word(pdev, pos, old); - - iounmap(mapped); - - return 0; -} - static ssize_t eeh_dev_break_write(struct file *filp, const char __user *user_buf, size_t count, loff_t *ppos) @@ -1829,7 +1834,7 @@ static ssize_t eeh_dev_break_write(struct file *filp, if (IS_ERR(pdev)) return PTR_ERR(pdev); - ret = eeh_debugfs_break_device(pdev); + ret = eeh_break_device(pdev); pci_dev_put(pdev); if (ret < 0) @@ -1844,11 +1849,6 @@ static const struct file_operations eeh_dev_break_fops = { .read = eeh_debugfs_dev_usage, }; -int eeh_pe_inject_mmio_error(struct pci_dev *pdev) -{ - return eeh_debugfs_break_device(pdev); -} - static ssize_t eeh_dev_can_recover(struct file *filp, const char __user *user_buf, size_t count, loff_t *ppos) diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S index 811a7130505c..56c5ebe21b99 100644 --- a/arch/powerpc/kernel/head_8xx.S +++ b/arch/powerpc/kernel/head_8xx.S @@ -494,6 +494,7 @@ FixupDAR:/* Entry point for dcbx workaround. */ bctr /* jump into table */ 152: mfdar r11 + mtdar r10 mtctr r11 /* restore ctr reg from DAR */ mfspr r11, SPRN_SPRG_THREAD stw r10, DAR(r11) diff --git a/arch/powerpc/kernel/proc_powerpc.c b/arch/powerpc/kernel/proc_powerpc.c index b109cd7b5d01..3816a2bf2b84 100644 --- a/arch/powerpc/kernel/proc_powerpc.c +++ b/arch/powerpc/kernel/proc_powerpc.c @@ -4,6 +4,7 @@ */ #include <linux/init.h> +#include <linux/memblock.h> #include <linux/mm.h> #include <linux/proc_fs.h> #include <linux/kernel.h> @@ -12,9 +13,10 @@ #include <asm/machdep.h> #include <asm/vdso_datapage.h> #include <asm/rtas.h> +#include <asm/systemcfg.h> #include <linux/uaccess.h> -#ifdef CONFIG_PPC64 +#ifdef CONFIG_PPC64_PROC_SYSTEMCFG static loff_t page_map_seek(struct file *file, loff_t off, int whence) { @@ -33,10 +35,9 @@ static int page_map_mmap( struct file *file, struct vm_area_struct *vma ) if ((vma->vm_end - vma->vm_start) > PAGE_SIZE) return -EINVAL; - remap_pfn_range(vma, vma->vm_start, - __pa(pde_data(file_inode(file))) >> PAGE_SHIFT, - PAGE_SIZE, vma->vm_page_prot); - return 0; + return remap_pfn_range(vma, vma->vm_start, + __pa(pde_data(file_inode(file))) >> PAGE_SHIFT, + PAGE_SIZE, vma->vm_page_prot); } static const struct proc_ops page_map_proc_ops = { @@ -45,13 +46,35 @@ static const struct proc_ops page_map_proc_ops = { .proc_mmap = page_map_mmap, }; +static union { + struct systemcfg data; + u8 page[PAGE_SIZE]; +} systemcfg_data_store __page_aligned_data; +struct systemcfg *systemcfg = &systemcfg_data_store.data; static int __init proc_ppc64_init(void) { struct proc_dir_entry *pde; + strcpy((char *)systemcfg->eye_catcher, "SYSTEMCFG:PPC64"); + systemcfg->version.major = SYSTEMCFG_MAJOR; + systemcfg->version.minor = SYSTEMCFG_MINOR; + systemcfg->processor = mfspr(SPRN_PVR); + /* + * Fake the old platform number for pSeries and add + * in LPAR bit if necessary + */ + systemcfg->platform = 0x100; + if (firmware_has_feature(FW_FEATURE_LPAR)) + systemcfg->platform |= 1; + systemcfg->physicalMemorySize = memblock_phys_mem_size(); + systemcfg->dcache_size = ppc64_caches.l1d.size; + systemcfg->dcache_line_size = ppc64_caches.l1d.line_size; + systemcfg->icache_size = ppc64_caches.l1i.size; + systemcfg->icache_line_size = ppc64_caches.l1i.line_size; + pde = proc_create_data("powerpc/systemcfg", S_IFREG | 0444, NULL, - &page_map_proc_ops, vdso_data); + &page_map_proc_ops, systemcfg); if (!pde) return 1; proc_set_size(pde, PAGE_SIZE); @@ -60,7 +83,7 @@ static int __init proc_ppc64_init(void) } __initcall(proc_ppc64_init); -#endif /* CONFIG_PPC64 */ +#endif /* CONFIG_PPC64_PROC_SYSTEMCFG */ /* * Create the ppc64 and ppc64/rtas directories early. This allows us to diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c index f7e86e09c49f..d31c9799cab2 100644 --- a/arch/powerpc/kernel/rtas.c +++ b/arch/powerpc/kernel/rtas.c @@ -1390,21 +1390,14 @@ bool __ref rtas_busy_delay(int status) */ ms = clamp(ms, 1U, 1000U); /* - * The delay hint is an order-of-magnitude suggestion, not - * a minimum. It is fine, possibly even advantageous, for - * us to pause for less time than hinted. For small values, - * use usleep_range() to ensure we don't sleep much longer - * than actually needed. - * - * See Documentation/timers/timers-howto.rst for - * explanation of the threshold used here. In effect we use - * usleep_range() for 9900 and 9901, msleep() for - * 9902-9905. + * The delay hint is an order-of-magnitude suggestion, not a + * minimum. It is fine, possibly even advantageous, for us to + * pause for less time than hinted. To make sure pause time will + * not be way longer than requested independent of HZ + * configuration, use fsleep(). See fsleep() for details of + * used sleeping functions. */ - if (ms <= 20) - usleep_range(ms * 100, ms * 1000); - else - msleep(ms); + fsleep(ms * 1000); break; case RTAS_BUSY: ret = true; diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c index 943430077375..0b732d3b283b 100644 --- a/arch/powerpc/kernel/setup-common.c +++ b/arch/powerpc/kernel/setup-common.c @@ -67,6 +67,7 @@ #include <asm/cpu_has_feature.h> #include <asm/kasan.h> #include <asm/mce.h> +#include <asm/systemcfg.h> #include "setup.h" @@ -560,7 +561,9 @@ void __init smp_setup_cpu_maps(void) out: of_node_put(dn); } - vdso_data->processorCount = num_present_cpus(); +#endif +#ifdef CONFIG_PPC64_PROC_SYSTEMCFG + systemcfg->processorCount = num_present_cpus(); #endif /* CONFIG_PPC64 */ /* Initialize CPU <=> thread mapping/ diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index 4ab9b8cee77a..5ac7084eebc0 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -61,6 +61,7 @@ #include <asm/ftrace.h> #include <asm/kup.h> #include <asm/fadump.h> +#include <asm/systemcfg.h> #include <trace/events/ipi.h> @@ -1186,8 +1187,8 @@ int generic_cpu_disable(void) return -EBUSY; set_cpu_online(cpu, false); -#ifdef CONFIG_PPC64 - vdso_data->processorCount--; +#ifdef CONFIG_PPC64_PROC_SYSTEMCFG + systemcfg->processorCount--; #endif /* Update affinity of all IRQs previously aimed at this CPU */ irq_migrate_all_off_this_cpu(); @@ -1642,10 +1643,12 @@ void start_secondary(void *unused) secondary_cpu_time_init(); -#ifdef CONFIG_PPC64 +#ifdef CONFIG_PPC64_PROC_SYSTEMCFG if (system_state == SYSTEM_RUNNING) - vdso_data->processorCount++; + systemcfg->processorCount++; +#endif +#ifdef CONFIG_PPC64 vdso_getcpu_init(); #endif set_numa_node(numa_cpu_lookup_table[cpu]); diff --git a/arch/powerpc/kernel/syscalls/syscall.tbl b/arch/powerpc/kernel/syscalls/syscall.tbl index ebae8415dfbb..d8b4ab78bef0 100644 --- a/arch/powerpc/kernel/syscalls/syscall.tbl +++ b/arch/powerpc/kernel/syscalls/syscall.tbl @@ -553,3 +553,7 @@ 460 common lsm_set_self_attr sys_lsm_set_self_attr 461 common lsm_list_modules sys_lsm_list_modules 462 common mseal sys_mseal +463 common setxattrat sys_setxattrat +464 common getxattrat sys_getxattrat +465 common listxattrat sys_listxattrat +466 common removexattrat sys_removexattrat diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 0ff9f038e800..0727332ad86f 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -71,11 +71,11 @@ #include <asm/vdso_datapage.h> #include <asm/firmware.h> #include <asm/mce.h> +#include <asm/systemcfg.h> /* powerpc clocksource/clockevent code */ #include <linux/clockchips.h> -#include <linux/timekeeper_internal.h> static u64 timebase_read(struct clocksource *); static struct clocksource clocksource_timebase = { @@ -951,6 +951,9 @@ void __init time_init(void) } vdso_data->tb_ticks_per_sec = tb_ticks_per_sec; +#ifdef CONFIG_PPC64_PROC_SYSTEMCFG + systemcfg->tb_ticks_per_sec = tb_ticks_per_sec; +#endif /* initialise and enable the large decrementer (if we have one) */ set_decrementer_max(); diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c index ee4b9d676cff..924f7f4fa597 100644 --- a/arch/powerpc/kernel/vdso.c +++ b/arch/powerpc/kernel/vdso.c @@ -16,7 +16,6 @@ #include <linux/user.h> #include <linux/elf.h> #include <linux/security.h> -#include <linux/memblock.h> #include <linux/syscalls.h> #include <linux/time_namespace.h> #include <vdso/datapage.h> @@ -349,25 +348,6 @@ static struct page ** __init vdso_setup_pages(void *start, void *end) static int __init vdso_init(void) { #ifdef CONFIG_PPC64 - /* - * Fill up the "systemcfg" stuff for backward compatibility - */ - strcpy((char *)vdso_data->eye_catcher, "SYSTEMCFG:PPC64"); - vdso_data->version.major = SYSTEMCFG_MAJOR; - vdso_data->version.minor = SYSTEMCFG_MINOR; - vdso_data->processor = mfspr(SPRN_PVR); - /* - * Fake the old platform number for pSeries and add - * in LPAR bit if necessary - */ - vdso_data->platform = 0x100; - if (firmware_has_feature(FW_FEATURE_LPAR)) - vdso_data->platform |= 1; - vdso_data->physicalMemorySize = memblock_phys_mem_size(); - vdso_data->dcache_size = ppc64_caches.l1d.size; - vdso_data->dcache_line_size = ppc64_caches.l1d.line_size; - vdso_data->icache_size = ppc64_caches.l1i.size; - vdso_data->icache_line_size = ppc64_caches.l1i.line_size; vdso_data->dcache_block_size = ppc64_caches.l1d.block_size; vdso_data->icache_block_size = ppc64_caches.l1i.block_size; vdso_data->dcache_log_block_size = ppc64_caches.l1d.log_block_size; diff --git a/arch/powerpc/kernel/vdso/Makefile b/arch/powerpc/kernel/vdso/Makefile index 56fb1633529a..31ca5a547004 100644 --- a/arch/powerpc/kernel/vdso/Makefile +++ b/arch/powerpc/kernel/vdso/Makefile @@ -22,7 +22,7 @@ endif ifneq ($(c-getrandom-y),) CFLAGS_vgetrandom-32.o += -include $(c-getrandom-y) - CFLAGS_vgetrandom-64.o += -include $(c-getrandom-y) $(call cc-option, -ffixed-r30) + CFLAGS_vgetrandom-64.o += -include $(c-getrandom-y) endif # Build rules |