diff options
Diffstat (limited to 'arch/mips/alchemy/devboards/pb1500')
| -rw-r--r-- | arch/mips/alchemy/devboards/pb1500/board_setup.c | 33 | ||||
| -rw-r--r-- | arch/mips/alchemy/devboards/pb1500/platform.c | 71 |
2 files changed, 70 insertions, 34 deletions
diff --git a/arch/mips/alchemy/devboards/pb1500/board_setup.c b/arch/mips/alchemy/devboards/pb1500/board_setup.c index 3b4fa3206969..37c1883b5ea9 100644 --- a/arch/mips/alchemy/devboards/pb1500/board_setup.c +++ b/arch/mips/alchemy/devboards/pb1500/board_setup.c @@ -33,13 +33,6 @@ #include <prom.h> - -char irq_tab_alchemy[][5] __initdata = { - [12] = { -1, AU1500_PCI_INTA, 0xff, 0xff, 0xff }, /* IDSEL 12 - HPT370 */ - [13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, AU1500_PCI_INTC, AU1500_PCI_INTD }, /* IDSEL 13 - PCI slot */ -}; - - const char *get_system_type(void) { return "Alchemy Pb1500"; @@ -101,20 +94,18 @@ void __init board_setup(void) #endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */ #ifdef CONFIG_PCI - /* Setup PCI bus controller */ - au_writel(0, Au1500_PCI_CMEM); - au_writel(0x00003fff, Au1500_CFG_BASE); -#if defined(__MIPSEB__) - au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG); -#else - au_writel(0xf, Au1500_PCI_CFG); -#endif - au_writel(0xf0000000, Au1500_PCI_MWMASK_DEV); - au_writel(0, Au1500_PCI_MWBASE_REV_CCL); - au_writel(0x02a00356, Au1500_PCI_STATCMD); - au_writel(0x00003c04, Au1500_PCI_HDRTYPE); - au_writel(0x00000008, Au1500_PCI_MBAR); - au_sync(); + { + void __iomem *base = + (void __iomem *)KSEG1ADDR(AU1500_PCI_PHYS_ADDR); + /* Setup PCI bus controller */ + __raw_writel(0x00003fff, base + PCI_REG_CMEM); + __raw_writel(0xf0000000, base + PCI_REG_MWMASK_DEV); + __raw_writel(0, base + PCI_REG_MWBASE_REV_CCL); + __raw_writel(0x02a00356, base + PCI_REG_STATCMD); + __raw_writel(0x00003c04, base + PCI_REG_PARAM); + __raw_writel(0x00000008, base + PCI_REG_MBAR); + wmb(); + } #endif /* Enable sys bus clock divider when IDLE state or no bus activity. */ diff --git a/arch/mips/alchemy/devboards/pb1500/platform.c b/arch/mips/alchemy/devboards/pb1500/platform.c index d443bc7aa76e..1e52a01bac00 100644 --- a/arch/mips/alchemy/devboards/pb1500/platform.c +++ b/arch/mips/alchemy/devboards/pb1500/platform.c @@ -18,32 +18,77 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#include <linux/dma-mapping.h> #include <linux/init.h> +#include <linux/platform_device.h> #include <asm/mach-au1x00/au1000.h> #include <asm/mach-db1x00/bcsr.h> #include "../platform.h" +static int pb1500_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin) +{ + if ((slot < 12) || (slot > 13) || pin == 0) + return -1; + if (slot == 12) + return (pin == 1) ? AU1500_PCI_INTA : 0xff; + if (slot == 13) { + switch (pin) { + case 1: return AU1500_PCI_INTA; + case 2: return AU1500_PCI_INTB; + case 3: return AU1500_PCI_INTC; + case 4: return AU1500_PCI_INTD; + } + } + return -1; +} + +static struct resource alchemy_pci_host_res[] = { + [0] = { + .start = AU1500_PCI_PHYS_ADDR, + .end = AU1500_PCI_PHYS_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct alchemy_pci_platdata pb1500_pci_pd = { + .board_map_irq = pb1500_map_pci_irq, + .pci_cfg_set = PCI_CONFIG_AEN | PCI_CONFIG_R2H | PCI_CONFIG_R1H | + PCI_CONFIG_CH | +#if defined(__MIPSEB__) + PCI_CONFIG_SIC_HWA_DAT | PCI_CONFIG_SM, +#else + 0, +#endif +}; + +static struct platform_device pb1500_pci_host = { + .dev.platform_data = &pb1500_pci_pd, + .name = "alchemy-pci", + .id = 0, + .num_resources = ARRAY_SIZE(alchemy_pci_host_res), + .resource = alchemy_pci_host_res, +}; + static int __init pb1500_dev_init(void) { int swapped; - /* PCMCIA. single socket, identical to Pb1500 */ - db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR, - PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, - PCMCIA_MEM_PHYS_ADDR, - PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, - PCMCIA_IO_PHYS_ADDR, - PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1, - AU1500_GPIO11_INT, /* card */ - AU1500_GPIO9_INT, /* insert */ - /*AU1500_GPIO10_INT*/0, /* stschg */ - 0, /* eject */ - 0); /* id */ + /* PCMCIA. single socket, identical to Pb1100 */ + db1x_register_pcmcia_socket( + AU1000_PCMCIA_ATTR_PHYS_ADDR, + AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, + AU1000_PCMCIA_MEM_PHYS_ADDR, + AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, + AU1000_PCMCIA_IO_PHYS_ADDR, + AU1000_PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1, + AU1500_GPIO11_INT, AU1500_GPIO9_INT, /* card / insert */ + /*AU1500_GPIO10_INT*/0, 0, 0); /* stschg / eject / id */ swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1000_SWAPBOOT; db1x_register_norflash(64 * 1024 * 1024, 4, swapped); + platform_device_register(&pb1500_pci_host); return 0; } -device_initcall(pb1500_dev_init); +arch_initcall(pb1500_dev_init); |