diff options
Diffstat (limited to 'arch/arm')
43 files changed, 216 insertions, 740 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index c49a775937db..bd8beaebf0ec 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -650,6 +650,7 @@ config ARCH_SHMOBILE_LEGACY select ARCH_SHMOBILE select ARM_PATCH_PHYS_VIRT if MMU select CLKDEV_LOOKUP + select CPU_V7 select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP @@ -660,6 +661,7 @@ config ARCH_SHMOBILE_LEGACY select NO_IOPORT_MAP select PINCTRL select PM_GENERIC_DOMAINS if PM + select SH_CLK_CPG select SPARSE_IRQ help Support for Renesas ARM SoC platforms using a non-multiplatform diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index 6d6d23c83d30..adadaf97ac01 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -134,6 +134,8 @@ i2c@13860000 { pinctrl-0 = <&i2c0_bus>; pinctrl-names = "default"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <400000>; status = "okay"; usb3503: usb3503@08 { @@ -148,6 +150,10 @@ max77686: pmic@09 { compatible = "maxim,max77686"; + interrupt-parent = <&gpx3>; + interrupts = <2 0>; + pinctrl-names = "default"; + pinctrl-0 = <&max77686_irq>; reg = <0x09>; #clock-cells = <1>; @@ -368,4 +374,11 @@ samsung,pins = "gpx1-3"; samsung,pin-pud = <0>; }; + + max77686_irq: max77686-irq { + samsung,pins = "gpx3-2"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; }; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 64fa27b36be0..c6c58c1c00e3 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -731,7 +731,7 @@ compatible = "fsl,imx53-vpu"; reg = <0x63ff4000 0x1000>; interrupts = <9>; - clocks = <&clks IMX5_CLK_VPU_GATE>, + clocks = <&clks IMX5_CLK_VPU_REFERENCE_GATE>, <&clks IMX5_CLK_VPU_GATE>; clock-names = "per", "ahb"; resets = <&src 1>; diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts index 8c1cb53464a0..4fa254347798 100644 --- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts +++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts @@ -119,7 +119,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; - phy-reset-gpios = <&gpio3 23 0>; + phy-reset-gpios = <&gpio1 25 0>; phy-supply = <&vgen2_1v2_eth>; status = "okay"; }; @@ -339,6 +339,7 @@ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 >; }; diff --git a/arch/arm/boot/dts/imx6sx-pinfunc.h b/arch/arm/boot/dts/imx6sx-pinfunc.h index 3e0b816dac08..bb9c6b78cb97 100644 --- a/arch/arm/boot/dts/imx6sx-pinfunc.h +++ b/arch/arm/boot/dts/imx6sx-pinfunc.h @@ -78,7 +78,7 @@ #define MX6SX_PAD_GPIO1_IO07__USDHC2_WP 0x0030 0x0378 0x0870 0x1 0x1 #define MX6SX_PAD_GPIO1_IO07__ENET2_MDIO 0x0030 0x0378 0x0770 0x2 0x0 #define MX6SX_PAD_GPIO1_IO07__AUDMUX_MCLK 0x0030 0x0378 0x0000 0x3 0x0 -#define MX6SX_PAD_GPIO1_IO07__UART1_CTS_B 0x0030 0x0378 0x082C 0x4 0x1 +#define MX6SX_PAD_GPIO1_IO07__UART1_CTS_B 0x0030 0x0378 0x0000 0x4 0x0 #define MX6SX_PAD_GPIO1_IO07__GPIO1_IO_7 0x0030 0x0378 0x0000 0x5 0x0 #define MX6SX_PAD_GPIO1_IO07__SRC_EARLY_RESET 0x0030 0x0378 0x0000 0x6 0x0 #define MX6SX_PAD_GPIO1_IO07__DCIC2_OUT 0x0030 0x0378 0x0000 0x7 0x0 @@ -96,7 +96,7 @@ #define MX6SX_PAD_GPIO1_IO09__WDOG2_WDOG_B 0x0038 0x0380 0x0000 0x1 0x0 #define MX6SX_PAD_GPIO1_IO09__SDMA_EXT_EVENT_1 0x0038 0x0380 0x0820 0x2 0x0 #define MX6SX_PAD_GPIO1_IO09__CCM_OUT0 0x0038 0x0380 0x0000 0x3 0x0 -#define MX6SX_PAD_GPIO1_IO09__UART2_CTS_B 0x0038 0x0380 0x0834 0x4 0x1 +#define MX6SX_PAD_GPIO1_IO09__UART2_CTS_B 0x0038 0x0380 0x0000 0x4 0x0 #define MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9 0x0038 0x0380 0x0000 0x5 0x0 #define MX6SX_PAD_GPIO1_IO09__SRC_INT_BOOT 0x0038 0x0380 0x0000 0x6 0x0 #define MX6SX_PAD_GPIO1_IO09__OBSERVE_MUX_OUT_4 0x0038 0x0380 0x0000 0x7 0x0 @@ -213,7 +213,7 @@ #define MX6SX_PAD_CSI_DATA07__ESAI_TX3_RX2 0x0068 0x03B0 0x079C 0x1 0x1 #define MX6SX_PAD_CSI_DATA07__I2C4_SDA 0x0068 0x03B0 0x07C4 0x2 0x2 #define MX6SX_PAD_CSI_DATA07__KPP_ROW_7 0x0068 0x03B0 0x07DC 0x3 0x0 -#define MX6SX_PAD_CSI_DATA07__UART6_CTS_B 0x0068 0x03B0 0x0854 0x4 0x1 +#define MX6SX_PAD_CSI_DATA07__UART6_CTS_B 0x0068 0x03B0 0x0000 0x4 0x0 #define MX6SX_PAD_CSI_DATA07__GPIO1_IO_21 0x0068 0x03B0 0x0000 0x5 0x0 #define MX6SX_PAD_CSI_DATA07__WEIM_DATA_16 0x0068 0x03B0 0x0000 0x6 0x0 #define MX6SX_PAD_CSI_DATA07__DCIC1_OUT 0x0068 0x03B0 0x0000 0x7 0x0 @@ -254,7 +254,7 @@ #define MX6SX_PAD_CSI_VSYNC__CSI1_VSYNC 0x0078 0x03C0 0x0708 0x0 0x0 #define MX6SX_PAD_CSI_VSYNC__ESAI_TX5_RX0 0x0078 0x03C0 0x07A4 0x1 0x1 #define MX6SX_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD 0x0078 0x03C0 0x0674 0x2 0x1 -#define MX6SX_PAD_CSI_VSYNC__UART4_CTS_B 0x0078 0x03C0 0x0844 0x3 0x3 +#define MX6SX_PAD_CSI_VSYNC__UART4_CTS_B 0x0078 0x03C0 0x0000 0x3 0x0 #define MX6SX_PAD_CSI_VSYNC__MQS_RIGHT 0x0078 0x03C0 0x0000 0x4 0x0 #define MX6SX_PAD_CSI_VSYNC__GPIO1_IO_25 0x0078 0x03C0 0x0000 0x5 0x0 #define MX6SX_PAD_CSI_VSYNC__WEIM_DATA_24 0x0078 0x03C0 0x0000 0x6 0x0 @@ -352,7 +352,7 @@ #define MX6SX_PAD_ENET2_TX_CLK__ENET2_TX_CLK 0x00A0 0x03E8 0x0000 0x0 0x0 #define MX6SX_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x00A0 0x03E8 0x076C 0x1 0x1 #define MX6SX_PAD_ENET2_TX_CLK__I2C3_SDA 0x00A0 0x03E8 0x07BC 0x2 0x1 -#define MX6SX_PAD_ENET2_TX_CLK__UART1_CTS_B 0x00A0 0x03E8 0x082C 0x3 0x3 +#define MX6SX_PAD_ENET2_TX_CLK__UART1_CTS_B 0x00A0 0x03E8 0x0000 0x3 0x0 #define MX6SX_PAD_ENET2_TX_CLK__MLB_CLK 0x00A0 0x03E8 0x07E8 0x4 0x1 #define MX6SX_PAD_ENET2_TX_CLK__GPIO2_IO_9 0x00A0 0x03E8 0x0000 0x5 0x0 #define MX6SX_PAD_ENET2_TX_CLK__USB_OTG2_PWR 0x00A0 0x03E8 0x0000 0x6 0x0 @@ -404,7 +404,7 @@ #define MX6SX_PAD_KEY_COL4__SAI2_RX_BCLK 0x00B4 0x03FC 0x0808 0x7 0x0 #define MX6SX_PAD_KEY_ROW0__KPP_ROW_0 0x00B8 0x0400 0x0000 0x0 0x0 #define MX6SX_PAD_KEY_ROW0__USDHC3_WP 0x00B8 0x0400 0x0000 0x1 0x0 -#define MX6SX_PAD_KEY_ROW0__UART6_CTS_B 0x00B8 0x0400 0x0854 0x2 0x3 +#define MX6SX_PAD_KEY_ROW0__UART6_CTS_B 0x00B8 0x0400 0x0000 0x2 0x0 #define MX6SX_PAD_KEY_ROW0__ECSPI1_MOSI 0x00B8 0x0400 0x0718 0x3 0x0 #define MX6SX_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x00B8 0x0400 0x0660 0x4 0x0 #define MX6SX_PAD_KEY_ROW0__GPIO2_IO_15 0x00B8 0x0400 0x0000 0x5 0x0 @@ -423,7 +423,7 @@ #define MX6SX_PAD_KEY_ROW1__M4_NMI 0x00BC 0x0404 0x0000 0x8 0x0 #define MX6SX_PAD_KEY_ROW2__KPP_ROW_2 0x00C0 0x0408 0x0000 0x0 0x0 #define MX6SX_PAD_KEY_ROW2__USDHC4_WP 0x00C0 0x0408 0x0878 0x1 0x1 -#define MX6SX_PAD_KEY_ROW2__UART5_CTS_B 0x00C0 0x0408 0x084C 0x2 0x3 +#define MX6SX_PAD_KEY_ROW2__UART5_CTS_B 0x00C0 0x0408 0x0000 0x2 0x0 #define MX6SX_PAD_KEY_ROW2__CAN1_RX 0x00C0 0x0408 0x068C 0x3 0x1 #define MX6SX_PAD_KEY_ROW2__CANFD_RX1 0x00C0 0x0408 0x0694 0x4 0x1 #define MX6SX_PAD_KEY_ROW2__GPIO2_IO_17 0x00C0 0x0408 0x0000 0x5 0x0 @@ -815,7 +815,7 @@ #define MX6SX_PAD_NAND_DATA05__RAWNAND_DATA05 0x0164 0x04AC 0x0000 0x0 0x0 #define MX6SX_PAD_NAND_DATA05__USDHC2_DATA5 0x0164 0x04AC 0x0000 0x1 0x0 #define MX6SX_PAD_NAND_DATA05__QSPI2_B_DQS 0x0164 0x04AC 0x0000 0x2 0x0 -#define MX6SX_PAD_NAND_DATA05__UART3_CTS_B 0x0164 0x04AC 0x083C 0x3 0x1 +#define MX6SX_PAD_NAND_DATA05__UART3_CTS_B 0x0164 0x04AC 0x0000 0x3 0x0 #define MX6SX_PAD_NAND_DATA05__AUDMUX_AUD4_RXC 0x0164 0x04AC 0x064C 0x4 0x0 #define MX6SX_PAD_NAND_DATA05__GPIO4_IO_9 0x0164 0x04AC 0x0000 0x5 0x0 #define MX6SX_PAD_NAND_DATA05__WEIM_AD_5 0x0164 0x04AC 0x0000 0x6 0x0 @@ -957,7 +957,7 @@ #define MX6SX_PAD_QSPI1A_SS1_B__SIM_M_HADDR_12 0x019C 0x04E4 0x0000 0x7 0x0 #define MX6SX_PAD_QSPI1A_SS1_B__SDMA_DEBUG_PC_3 0x019C 0x04E4 0x0000 0x9 0x0 #define MX6SX_PAD_QSPI1B_DATA0__QSPI1_B_DATA_0 0x01A0 0x04E8 0x0000 0x0 0x0 -#define MX6SX_PAD_QSPI1B_DATA0__UART3_CTS_B 0x01A0 0x04E8 0x083C 0x1 0x4 +#define MX6SX_PAD_QSPI1B_DATA0__UART3_CTS_B 0x01A0 0x04E8 0x0000 0x1 0x0 #define MX6SX_PAD_QSPI1B_DATA0__ECSPI3_MOSI 0x01A0 0x04E8 0x0738 0x2 0x1 #define MX6SX_PAD_QSPI1B_DATA0__ESAI_RX_FS 0x01A0 0x04E8 0x0778 0x3 0x2 #define MX6SX_PAD_QSPI1B_DATA0__CSI1_DATA_22 0x01A0 0x04E8 0x06F4 0x4 0x1 @@ -1236,7 +1236,7 @@ #define MX6SX_PAD_SD1_DATA2__AUDMUX_AUD5_TXFS 0x0230 0x0578 0x0670 0x1 0x1 #define MX6SX_PAD_SD1_DATA2__PWM3_OUT 0x0230 0x0578 0x0000 0x2 0x0 #define MX6SX_PAD_SD1_DATA2__GPT_COMPARE2 0x0230 0x0578 0x0000 0x3 0x0 -#define MX6SX_PAD_SD1_DATA2__UART2_CTS_B 0x0230 0x0578 0x0834 0x4 0x2 +#define MX6SX_PAD_SD1_DATA2__UART2_CTS_B 0x0230 0x0578 0x0000 0x4 0x0 #define MX6SX_PAD_SD1_DATA2__GPIO6_IO_4 0x0230 0x0578 0x0000 0x5 0x0 #define MX6SX_PAD_SD1_DATA2__ECSPI4_RDY 0x0230 0x0578 0x0000 0x6 0x0 #define MX6SX_PAD_SD1_DATA2__CCM_OUT0 0x0230 0x0578 0x0000 0x7 0x0 @@ -1315,7 +1315,7 @@ #define MX6SX_PAD_SD2_DATA3__VADC_CLAMP_CURRENT_3 0x024C 0x0594 0x0000 0x8 0x0 #define MX6SX_PAD_SD2_DATA3__MMDC_DEBUG_31 0x024C 0x0594 0x0000 0x9 0x0 #define MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x0250 0x0598 0x0000 0x0 0x0 -#define MX6SX_PAD_SD3_CLK__UART4_CTS_B 0x0250 0x0598 0x0844 0x1 0x0 +#define MX6SX_PAD_SD3_CLK__UART4_CTS_B 0x0250 0x0598 0x0000 0x1 0x0 #define MX6SX_PAD_SD3_CLK__ECSPI4_SCLK 0x0250 0x0598 0x0740 0x2 0x0 #define MX6SX_PAD_SD3_CLK__AUDMUX_AUD6_RXFS 0x0250 0x0598 0x0680 0x3 0x0 #define MX6SX_PAD_SD3_CLK__LCDIF2_VSYNC 0x0250 0x0598 0x0000 0x4 0x0 @@ -1409,7 +1409,7 @@ #define MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x0274 0x05BC 0x0000 0x0 0x0 #define MX6SX_PAD_SD3_DATA7__CAN1_RX 0x0274 0x05BC 0x068C 0x1 0x0 #define MX6SX_PAD_SD3_DATA7__CANFD_RX1 0x0274 0x05BC 0x0694 0x2 0x0 -#define MX6SX_PAD_SD3_DATA7__UART3_CTS_B 0x0274 0x05BC 0x083C 0x3 0x3 +#define MX6SX_PAD_SD3_DATA7__UART3_CTS_B 0x0274 0x05BC 0x0000 0x3 0x0 #define MX6SX_PAD_SD3_DATA7__LCDIF2_DATA_5 0x0274 0x05BC 0x0000 0x4 0x0 #define MX6SX_PAD_SD3_DATA7__GPIO7_IO_9 0x0274 0x05BC 0x0000 0x5 0x0 #define MX6SX_PAD_SD3_DATA7__ENET1_1588_EVENT0_IN 0x0274 0x05BC 0x0000 0x6 0x0 @@ -1510,7 +1510,7 @@ #define MX6SX_PAD_SD4_DATA6__SDMA_DEBUG_EVENT_CHANNEL_1 0x0298 0x05E0 0x0000 0x9 0x0 #define MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x029C 0x05E4 0x0000 0x0 0x0 #define MX6SX_PAD_SD4_DATA7__RAWNAND_DATA08 0x029C 0x05E4 0x0000 0x1 0x0 -#define MX6SX_PAD_SD4_DATA7__UART5_CTS_B 0x029C 0x05E4 0x084C 0x2 0x1 +#define MX6SX_PAD_SD4_DATA7__UART5_CTS_B 0x029C 0x05E4 0x0000 0x2 0x0 #define MX6SX_PAD_SD4_DATA7__ECSPI3_SS0 0x029C 0x05E4 0x073C 0x3 0x0 #define MX6SX_PAD_SD4_DATA7__LCDIF2_DATA_15 0x029C 0x05E4 0x0000 0x4 0x0 #define MX6SX_PAD_SD4_DATA7__GPIO6_IO_21 0x029C 0x05E4 0x0000 0x5 0x0 diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index 23486c081a69..be59014474b2 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -275,11 +275,6 @@ renesas,function = "msiof0"; }; - i2c6_pins: i2c6 { - renesas,groups = "i2c6"; - renesas,function = "i2c6"; - }; - usb0_pins: usb0 { renesas,groups = "usb0"; renesas,function = "usb0"; @@ -420,8 +415,6 @@ }; &i2c6 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c6_pins>; status = "okay"; clock-frequency = <100000>; diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts index 042f821d9e4d..c9d912da6141 100644 --- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts +++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts @@ -149,6 +149,8 @@ &mmc0 { /* sdmmc */ num-slots = <1>; status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>; vmmc-supply = <&vcc_sd0>; slot@0 { diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts index 171b610db709..5e4e3c238b2d 100644 --- a/arch/arm/boot/dts/rk3188-radxarock.dts +++ b/arch/arm/boot/dts/rk3188-radxarock.dts @@ -179,6 +179,8 @@ &mmc0 { num-slots = <1>; status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>; vmmc-supply = <&vcc_sd0>; slot@0 { diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index 44b07e512c24..e06fbfc55bb7 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -660,6 +660,8 @@ clock-frequency = <100000>; resets = <&apb2_rst 0>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; i2c1: i2c@01c2b000 { @@ -670,6 +672,8 @@ clock-frequency = <100000>; resets = <&apb2_rst 1>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; i2c2: i2c@01c2b400 { @@ -680,6 +684,8 @@ clock-frequency = <100000>; resets = <&apb2_rst 2>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; i2c3: i2c@01c2b800 { @@ -690,6 +696,8 @@ clock-frequency = <100000>; resets = <&apb2_rst 3>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; gmac: ethernet@01c30000 { diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi index 8adaa7871dd3..a5446cba9804 100644 --- a/arch/arm/boot/dts/tegra30-apalis.dtsi +++ b/arch/arm/boot/dts/tegra30-apalis.dtsi @@ -423,7 +423,7 @@ vcc4-supply = <&sys_3v3_reg>; vcc5-supply = <&sys_3v3_reg>; vcc6-supply = <&vio_reg>; - vcc7-supply = <&sys_5v0_reg>; + vcc7-supply = <&charge_pump_5v0_reg>; vccio-supply = <&sys_3v3_reg>; regulators { @@ -674,5 +674,14 @@ regulator-max-microvolt = <3300000>; regulator-always-on; }; + + charge_pump_5v0_reg: regulator@101 { + compatible = "regulator-fixed"; + reg = <101>; + regulator-name = "5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; }; }; diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi index bf16f8e65627..c4ed1bec4d92 100644 --- a/arch/arm/boot/dts/tegra30-colibri.dtsi +++ b/arch/arm/boot/dts/tegra30-colibri.dtsi @@ -201,7 +201,7 @@ vcc4-supply = <&sys_3v3_reg>; vcc5-supply = <&sys_3v3_reg>; vcc6-supply = <&vio_reg>; - vcc7-supply = <&sys_5v0_reg>; + vcc7-supply = <&charge_pump_5v0_reg>; vccio-supply = <&sys_3v3_reg>; regulators { @@ -373,5 +373,14 @@ regulator-max-microvolt = <3300000>; regulator-always-on; }; + + charge_pump_5v0_reg: regulator@101 { + compatible = "regulator-fixed"; + reg = <101>; + regulator-name = "5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; }; }; diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts index 11d733406c7e..b8a5e8c68f06 100644 --- a/arch/arm/boot/dts/vf610-twr.dts +++ b/arch/arm/boot/dts/vf610-twr.dts @@ -168,7 +168,7 @@ }; pinctrl_esdhc1: esdhc1grp { - fsl,fsl,pins = < + fsl,pins = < VF610_PAD_PTA24__ESDHC1_CLK 0x31ef VF610_PAD_PTA25__ESDHC1_CMD 0x31ef VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 6cc6f7aebdae..dd28e1fedbdc 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -28,6 +28,11 @@ config OLD_CLK_AT91 bool default AT91_PMC_UNIT && AT91_USE_OLD_CLK +config OLD_IRQ_AT91 + bool + select MULTI_IRQ_HANDLER + select SPARSE_IRQ + config AT91_SAM9_ALT_RESET bool default !ARCH_AT91X40 @@ -45,18 +50,16 @@ config HAVE_AT91_SMD config SOC_AT91SAM9 bool select AT91_SAM9_TIME + select ATMEL_AIC_IRQ if !OLD_IRQ_AT91 select CPU_ARM926T select GENERIC_CLOCKEVENTS - select MULTI_IRQ_HANDLER - select SPARSE_IRQ config SOC_SAMA5 bool select AT91_SAM9_TIME + select ATMEL_AIC5_IRQ select CPU_V7 select GENERIC_CLOCKEVENTS - select MULTI_IRQ_HANDLER - select SPARSE_IRQ select USE_OF menu "Atmel AT91 System-on-Chip" @@ -70,8 +73,7 @@ config ARCH_AT91X40 depends on !MMU select CPU_ARM7TDMI select ARCH_USES_GETTIMEOFFSET - select MULTI_IRQ_HANDLER - select SPARSE_IRQ + select OLD_IRQ_AT91 help Select this if you are using one of Atmel's AT91X40 SoC. @@ -108,11 +110,10 @@ endif if SOC_SAM_V4_V5 config SOC_AT91RM9200 bool "AT91RM9200" + select ATMEL_AIC_IRQ if !OLD_IRQ_AT91 select CPU_ARM920T select GENERIC_CLOCKEVENTS select HAVE_AT91_DBGU0 - select MULTI_IRQ_HANDLER - select SPARSE_IRQ select HAVE_AT91_USB_CLK config SOC_AT91SAM9260 diff --git a/arch/arm/mach-at91/Kconfig.non_dt b/arch/arm/mach-at91/Kconfig.non_dt index 44ace320d2e1..b774c3d3c632 100644 --- a/arch/arm/mach-at91/Kconfig.non_dt +++ b/arch/arm/mach-at91/Kconfig.non_dt @@ -14,31 +14,37 @@ config ARCH_AT91RM9200 bool "AT91RM9200" select SOC_AT91RM9200 select AT91_USE_OLD_CLK + select OLD_IRQ_AT91 config ARCH_AT91SAM9260 bool "AT91SAM9260 or AT91SAM9XE or AT91SAM9G20" select SOC_AT91SAM9260 select AT91_USE_OLD_CLK + select OLD_IRQ_AT91 config ARCH_AT91SAM9261 bool "AT91SAM9261 or AT91SAM9G10" select SOC_AT91SAM9261 select AT91_USE_OLD_CLK + select OLD_IRQ_AT91 config ARCH_AT91SAM9263 bool "AT91SAM9263" select SOC_AT91SAM9263 select AT91_USE_OLD_CLK + select OLD_IRQ_AT91 config ARCH_AT91SAM9RL bool "AT91SAM9RL" select SOC_AT91SAM9RL select AT91_USE_OLD_CLK + select OLD_IRQ_AT91 config ARCH_AT91SAM9G45 bool "AT91SAM9G45" select SOC_AT91SAM9G45 select AT91_USE_OLD_CLK + select OLD_IRQ_AT91 endchoice diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 78e9cec282f4..d972fd67de83 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -2,11 +2,12 @@ # Makefile for the linux kernel. # -obj-y := irq.o gpio.o setup.o sysirq_mask.o +obj-y := gpio.o setup.o sysirq_mask.o obj-m := obj-n := obj- := +obj-$(CONFIG_OLD_IRQ_AT91) += irq.o obj-$(CONFIG_OLD_CLK_AT91) += clock.o obj-$(CONFIG_AT91_SAM9_ALT_RESET) += at91sam9_alt_reset.o obj-$(CONFIG_AT91_SAM9G45_RESET) += at91sam9g45_reset.o diff --git a/arch/arm/mach-at91/board-dt-rm9200.c b/arch/arm/mach-at91/board-dt-rm9200.c index 3a185faee795..61ea21445664 100644 --- a/arch/arm/mach-at91/board-dt-rm9200.c +++ b/arch/arm/mach-at91/board-dt-rm9200.c @@ -24,17 +24,6 @@ #include "at91_aic.h" #include "generic.h" - -static const struct of_device_id irq_of_match[] __initconst = { - { .compatible = "atmel,at91rm9200-aic", .data = at91_aic_of_init }, - { /*sentinel*/ } -}; - -static void __init at91rm9200_dt_init_irq(void) -{ - of_irq_init(irq_of_match); -} - static const char *at91rm9200_dt_board_compat[] __initdata = { "atmel,at91rm9200", NULL @@ -43,8 +32,6 @@ static const char *at91rm9200_dt_board_compat[] __initdata = { DT_MACHINE_START(at91rm9200_dt, "Atmel AT91RM9200 (Device Tree)") .init_time = at91rm9200_timer_init, .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, .init_early = at91rm9200_dt_initialize, - .init_irq = at91rm9200_dt_init_irq, .dt_compat = at91rm9200_dt_board_compat, MACHINE_END diff --git a/arch/arm/mach-at91/board-dt-sam9.c b/arch/arm/mach-at91/board-dt-sam9.c index 575b0be66ca8..dfa8d48146fe 100644 --- a/arch/arm/mach-at91/board-dt-sam9.c +++ b/arch/arm/mach-at91/board-dt-sam9.c @@ -34,17 +34,6 @@ static void __init sam9_dt_timer_init(void) at91sam926x_pit_init(); } -static const struct of_device_id irq_of_match[] __initconst = { - - { .compatible = "atmel,at91rm9200-aic", .data = at91_aic_of_init }, - { /*sentinel*/ } -}; - -static void __init at91_dt_init_irq(void) -{ - of_irq_init(irq_of_match); -} - static const char *at91_dt_board_compat[] __initdata = { "atmel,at91sam9", NULL @@ -54,8 +43,6 @@ DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM (Device Tree)") /* Maintainer: Atmel */ .init_time = sam9_dt_timer_init, .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, .init_early = at91_dt_initialize, - .init_irq = at91_dt_init_irq, .dt_compat = at91_dt_board_compat, MACHINE_END diff --git a/arch/arm/mach-at91/board-dt-sama5.c b/arch/arm/mach-at91/board-dt-sama5.c index 075ec0576ada..d6fe04bcaabd 100644 --- a/arch/arm/mach-at91/board-dt-sama5.c +++ b/arch/arm/mach-at91/board-dt-sama5.c @@ -35,17 +35,6 @@ static void __init sama5_dt_timer_init(void) at91sam926x_pit_init(); } -static const struct of_device_id irq_of_match[] __initconst = { - - { .compatible = "atmel,sama5d3-aic", .data = at91_aic5_of_init }, - { /*sentinel*/ } -}; - -static void __init at91_dt_init_irq(void) -{ - of_irq_init(irq_of_match); -} - static int ksz9021rn_phy_fixup(struct phy_device *phy) { int value; @@ -82,9 +71,7 @@ DT_MACHINE_START(sama5_dt, "Atmel SAMA5 (Device Tree)") /* Maintainer: Atmel */ .init_time = sama5_dt_timer_init, .map_io = at91_map_io, - .handle_irq = at91_aic5_handle_irq, .init_early = at91_dt_initialize, - .init_irq = at91_dt_init_irq, .init_machine = sama5_dt_device_init, .dt_compat = sama5_dt_board_compat, MACHINE_END diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c index 3d192c5aee66..cdb3ec9efd2b 100644 --- a/arch/arm/mach-at91/irq.c +++ b/arch/arm/mach-at91/irq.c @@ -48,11 +48,6 @@ void __iomem *at91_aic_base; static struct irq_domain *at91_aic_domain; static struct device_node *at91_aic_np; static unsigned int n_irqs = NR_AIC_IRQS; -static unsigned long at91_aic_caps = 0; - -/* AIC5 introduces a Source Select Register */ -#define AT91_AIC_CAP_AIC5 (1 << 0) -#define has_aic5() (at91_aic_caps & AT91_AIC_CAP_AIC5) #ifdef CONFIG_PM @@ -92,50 +87,14 @@ static int at91_aic_set_wake(struct irq_data *d, unsigned value) void at91_irq_suspend(void) { - int bit = -1; - - if (has_aic5()) { - /* disable enabled irqs */ - while ((bit = find_next_bit(backups, n_irqs, bit + 1)) < n_irqs) { - at91_aic_write(AT91_AIC5_SSR, - bit & AT91_AIC5_INTSEL_MSK); - at91_aic_write(AT91_AIC5_IDCR, 1); - } - /* enable wakeup irqs */ - bit = -1; - while ((bit = find_next_bit(wakeups, n_irqs, bit + 1)) < n_irqs) { - at91_aic_write(AT91_AIC5_SSR, - bit & AT91_AIC5_INTSEL_MSK); - at91_aic_write(AT91_AIC5_IECR, 1); - } - } else { - at91_aic_write(AT91_AIC_IDCR, *backups); - at91_aic_write(AT91_AIC_IECR, *wakeups); - } + at91_aic_write(AT91_AIC_IDCR, *backups); + at91_aic_write(AT91_AIC_IECR, *wakeups); } void at91_irq_resume(void) { - int bit = -1; - - if (has_aic5()) { - /* disable wakeup irqs */ - while ((bit = find_next_bit(wakeups, n_irqs, bit + 1)) < n_irqs) { - at91_aic_write(AT91_AIC5_SSR, - bit & AT91_AIC5_INTSEL_MSK); - at91_aic_write(AT91_AIC5_IDCR, 1); - } - /* enable irqs disabled for suspend */ - bit = -1; - while ((bit = find_next_bit(backups, n_irqs, bit + 1)) < n_irqs) { - at91_aic_write(AT91_AIC5_SSR, - bit & AT91_AIC5_INTSEL_MSK); - at91_aic_write(AT91_AIC5_IECR, 1); - } - } else { - at91_aic_write(AT91_AIC_IDCR, *wakeups); - at91_aic_write(AT91_AIC_IECR, *backups); - } + at91_aic_write(AT91_AIC_IDCR, *wakeups); + at91_aic_write(AT91_AIC_IECR, *backups); } #else @@ -169,21 +128,6 @@ at91_aic_handle_irq(struct pt_regs *regs) handle_IRQ(irqnr, regs); } -asmlinkage void __exception_irq_entry -at91_aic5_handle_irq(struct pt_regs *regs) -{ - u32 irqnr; - u32 irqstat; - - irqnr = at91_aic_read(AT91_AIC5_IVR); - irqstat = at91_aic_read(AT91_AIC5_ISR); - - if (!irqstat) - at91_aic_write(AT91_AIC5_EOICR, 0); - else - handle_IRQ(irqnr, regs); -} - static void at91_aic_mask_irq(struct irq_data *d) { /* Disable interrupt on AIC */ @@ -192,15 +136,6 @@ static void at91_aic_mask_irq(struct irq_data *d) clear_backup(d->hwirq); } -static void __maybe_unused at91_aic5_mask_irq(struct irq_data *d) -{ - /* Disable interrupt on AIC5 */ - at91_aic_write(AT91_AIC5_SSR, d->hwirq & AT91_AIC5_INTSEL_MSK); - at91_aic_write(AT91_AIC5_IDCR, 1); - /* Update ISR cache */ - clear_backup(d->hwirq); -} - static void at91_aic_unmask_irq(struct irq_data *d) { /* Enable interrupt on AIC */ @@ -209,15 +144,6 @@ static void at91_aic_unmask_irq(struct irq_data *d) set_backup(d->hwirq); } -static void __maybe_unused at91_aic5_unmask_irq(struct irq_data *d) -{ - /* Enable interrupt on AIC5 */ - at91_aic_write(AT91_AIC5_SSR, d->hwirq & AT91_AIC5_INTSEL_MSK); - at91_aic_write(AT91_AIC5_IECR, 1); - /* Update ISR cache */ - set_backup(d->hwirq); -} - static void at91_aic_eoi(struct irq_data *d) { /* @@ -227,11 +153,6 @@ static void at91_aic_eoi(struct irq_data *d) at91_aic_write(AT91_AIC_EOICR, 0); } -static void __maybe_unused at91_aic5_eoi(struct irq_data *d) -{ - at91_aic_write(AT91_AIC5_EOICR, 0); -} - static unsigned long *at91_extern_irq; u32 at91_get_extern_irq(void) @@ -282,16 +203,8 @@ static int at91_aic_set_type(struct irq_data *d, unsigned type) if (srctype < 0) return srctype; - if (has_aic5()) { - at91_aic_write(AT91_AIC5_SSR, - d->hwirq & AT91_AIC5_INTSEL_MSK); - smr = at91_aic_read(AT91_AIC5_SMR) & ~AT91_AIC_SRCTYPE; - at91_aic_write(AT91_AIC5_SMR, smr | srctype); - } else { - smr = at91_aic_read(AT91_AIC_SMR(d->hwirq)) - & ~AT91_AIC_SRCTYPE; - at91_aic_write(AT91_AIC_SMR(d->hwirq), smr | srctype); - } + smr = at91_aic_read(AT91_AIC_SMR(d->hwirq)) & ~AT91_AIC_SRCTYPE; + at91_aic_write(AT91_AIC_SMR(d->hwirq), smr | srctype); return 0; } @@ -331,177 +244,6 @@ static void __init at91_aic_hw_init(unsigned int spu_vector) at91_aic_write(AT91_AIC_ICCR, 0xFFFFFFFF); } -static void __init __maybe_unused at91_aic5_hw_init(unsigned int spu_vector) -{ - int i; - - /* - * Perform 8 End Of Interrupt Command to make sure AIC - * will not Lock out nIRQ - */ - for (i = 0; i < 8; i++) - at91_aic_write(AT91_AIC5_EOICR, 0); - - /* - * Spurious Interrupt ID in Spurious Vector Register. - * When there is no current interrupt, the IRQ Vector Register - * reads the value stored in AIC_SPU - */ - at91_aic_write(AT91_AIC5_SPU, spu_vector); - - /* No debugging in AIC: Debug (Protect) Control Register */ - at91_aic_write(AT91_AIC5_DCR, 0); - - /* Disable and clear all interrupts initially */ - for (i = 0; i < n_irqs; i++) { - at91_aic_write(AT91_AIC5_SSR, i & AT91_AIC5_INTSEL_MSK); - at91_aic_write(AT91_AIC5_IDCR, 1); - at91_aic_write(AT91_AIC5_ICCR, 1); - } -} - -#if defined(CONFIG_OF) -static unsigned int *at91_aic_irq_priorities; - -static int at91_aic_irq_map(struct irq_domain *h, unsigned int virq, - irq_hw_number_t hw) -{ - /* Put virq number in Source Vector Register */ - at91_aic_write(AT91_AIC_SVR(hw), virq); - - /* Active Low interrupt, with priority */ - at91_aic_write(AT91_AIC_SMR(hw), - AT91_AIC_SRCTYPE_LOW | at91_aic_irq_priorities[hw]); - - irq_set_chip_and_handler(virq, &at91_aic_chip, handle_fasteoi_irq); - set_irq_flags(virq, IRQF_VALID | IRQF_PROBE); - - return 0; -} - -static int at91_aic5_irq_map(struct irq_domain *h, unsigned int virq, - irq_hw_number_t hw) -{ - at91_aic_write(AT91_AIC5_SSR, hw & AT91_AIC5_INTSEL_MSK); - - /* Put virq number in Source Vector Register */ - at91_aic_write(AT91_AIC5_SVR, virq); - - /* Active Low interrupt, with priority */ - at91_aic_write(AT91_AIC5_SMR, - AT91_AIC_SRCTYPE_LOW | at91_aic_irq_priorities[hw]); - - irq_set_chip_and_handler(virq, &at91_aic_chip, handle_fasteoi_irq); - set_irq_flags(virq, IRQF_VALID | IRQF_PROBE); - - return 0; -} - -static int at91_aic_irq_domain_xlate(struct irq_domain *d, struct device_node *ctrlr, - const u32 *intspec, unsigned int intsize, - irq_hw_number_t *out_hwirq, unsigned int *out_type) -{ - if (WARN_ON(intsize < 3)) - return -EINVAL; - if (WARN_ON(intspec[0] >= n_irqs)) - return -EINVAL; - if (WARN_ON((intspec[2] < AT91_AIC_IRQ_MIN_PRIORITY) - || (intspec[2] > AT91_AIC_IRQ_MAX_PRIORITY))) - return -EINVAL; - - *out_hwirq = intspec[0]; - *out_type = intspec[1] & IRQ_TYPE_SENSE_MASK; - at91_aic_irq_priorities[*out_hwirq] = intspec[2]; - - return 0; -} - -static struct irq_domain_ops at91_aic_irq_ops = { - .map = at91_aic_irq_map, - .xlate = at91_aic_irq_domain_xlate, -}; - -int __init at91_aic_of_common_init(struct device_node *node, - struct device_node *parent) -{ - struct property *prop; - const __be32 *p; - u32 val; - - at91_extern_irq = kzalloc(BITS_TO_LONGS(n_irqs) - * sizeof(*at91_extern_irq), GFP_KERNEL); - if (!at91_extern_irq) - return -ENOMEM; - - if (at91_aic_pm_init()) { - kfree(at91_extern_irq); - return -ENOMEM; - } - - at91_aic_irq_priorities = kzalloc(n_irqs - * sizeof(*at91_aic_irq_priorities), - GFP_KERNEL); - if (!at91_aic_irq_priorities) - return -ENOMEM; - - at91_aic_base = of_iomap(node, 0); - at91_aic_np = node; - - at91_aic_domain = irq_domain_add_linear(at91_aic_np, n_irqs, - &at91_aic_irq_ops, NULL); - if (!at91_aic_domain) - panic("Unable to add AIC irq domain (DT)\n"); - - of_property_for_each_u32(node, "atmel,external-irqs", prop, p, val) { - if (val >= n_irqs) - pr_warn("AIC: external irq %d >= %d skip it\n", - val, n_irqs); - else - set_bit(val, at91_extern_irq); - } - - irq_set_default_host(at91_aic_domain); - - return 0; -} - -int __init at91_aic_of_init(struct device_node *node, - struct device_node *parent) -{ - int err; - - err = at91_aic_of_common_init(node, parent); - if (err) - return err; - - at91_aic_hw_init(n_irqs); - - return 0; -} - -int __init at91_aic5_of_init(struct device_node *node, - struct device_node *parent) -{ - int err; - - at91_aic_caps |= AT91_AIC_CAP_AIC5; - n_irqs = NR_AIC5_IRQS; - at91_aic_chip.irq_ack = at91_aic5_mask_irq; - at91_aic_chip.irq_mask = at91_aic5_mask_irq; - at91_aic_chip.irq_unmask = at91_aic5_unmask_irq; - at91_aic_chip.irq_eoi = at91_aic5_eoi; - at91_aic_irq_ops.map = at91_aic5_irq_map; - - err = at91_aic_of_common_init(node, parent); - if (err) - return err; - - at91_aic5_hw_init(n_irqs); - - return 0; -} -#endif - /* * Initialize the AIC interrupt controller. */ diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index e95554532987..5920373809c5 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -206,16 +206,19 @@ static int at91_pm_enter(suspend_state_t state) at91_pinctrl_gpio_suspend(); else at91_gpio_suspend(); - at91_irq_suspend(); - pr_debug("AT91: PM - wake mask %08x, pm state %d\n", - /* remember all the always-wake irqs */ - (at91_pmc_read(AT91_PMC_PCSR) - | (1 << AT91_ID_FIQ) - | (1 << AT91_ID_SYS) - | (at91_get_extern_irq())) - & at91_aic_read(AT91_AIC_IMR), - state); + if (IS_ENABLED(CONFIG_OLD_IRQ_AT91) && at91_aic_base) { + at91_irq_suspend(); + + pr_debug("AT91: PM - wake mask %08x, pm state %d\n", + /* remember all the always-wake irqs */ + (at91_pmc_read(AT91_PMC_PCSR) + | (1 << AT91_ID_FIQ) + | (1 << AT91_ID_SYS) + | (at91_get_extern_irq())) + & at91_aic_read(AT91_AIC_IMR), + state); + } switch (state) { /* @@ -280,12 +283,17 @@ static int at91_pm_enter(suspend_state_t state) goto error; } - pr_debug("AT91: PM - wakeup %08x\n", - at91_aic_read(AT91_AIC_IPR) & at91_aic_read(AT91_AIC_IMR)); + if (IS_ENABLED(CONFIG_OLD_IRQ_AT91) && at91_aic_base) + pr_debug("AT91: PM - wakeup %08x\n", + at91_aic_read(AT91_AIC_IPR) & + at91_aic_read(AT91_AIC_IMR)); error: target_state = PM_SUSPEND_ON; - at91_irq_resume(); + + if (IS_ENABLED(CONFIG_OLD_IRQ_AT91) && at91_aic_base) + at91_irq_resume(); + if (of_have_populated_dt()) at91_pinctrl_gpio_resume(); else diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index f7a07a58ebb6..0bf893a574f9 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c @@ -49,7 +49,8 @@ void __init at91_init_irq_default(void) void __init at91_init_interrupts(unsigned int *priority) { /* Initialize the AIC interrupt controller */ - at91_aic_init(priority, at91_boot_soc.extern_irq); + if (IS_ENABLED(CONFIG_OLD_IRQ_AT91)) + at91_aic_init(priority, at91_boot_soc.extern_irq); /* Enable GPIO interrupts */ at91_gpio_irq_setup(); diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c index 2a6323b15782..671acc5a3282 100644 --- a/arch/arm/mach-clps711x/common.c +++ b/arch/arm/mach-clps711x/common.c @@ -19,29 +19,17 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#include <linux/io.h> + #include <linux/init.h> #include <linux/sizes.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/clk.h> -#include <linux/clkdev.h> -#include <linux/clockchips.h> -#include <linux/clocksource.h> -#include <linux/clk-provider.h> -#include <linux/sched_clock.h> #include <asm/mach/map.h> -#include <asm/mach/time.h> #include <asm/system_misc.h> #include <mach/hardware.h> #include "common.h" -static struct clk *clk_pll, *clk_bus, *clk_uart, *clk_timerl, *clk_timerh, - *clk_tint, *clk_spi; - /* * This maps the generic CLPS711x registers */ @@ -64,129 +52,11 @@ void __init clps711x_init_irq(void) clps711x_intc_init(CLPS711X_PHYS_BASE, SZ_16K); } -static u64 notrace clps711x_sched_clock_read(void) -{ - return ~readw_relaxed(CLPS711X_VIRT_BASE + TC1D); -} - -static void clps711x_clockevent_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) -{ - disable_irq(IRQ_TC2OI); - - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - enable_irq(IRQ_TC2OI); - break; - case CLOCK_EVT_MODE_ONESHOT: - /* Not supported */ - case CLOCK_EVT_MODE_SHUTDOWN: - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_RESUME: - /* Left event sources disabled, no more interrupts appear */ - break; - } -} - -static struct clock_event_device clockevent_clps711x = { - .name = "clps711x-clockevent", - .rating = 300, - .features = CLOCK_EVT_FEAT_PERIODIC, - .set_mode = clps711x_clockevent_set_mode, -}; - -static irqreturn_t clps711x_timer_interrupt(int irq, void *dev_id) -{ - clockevent_clps711x.event_handler(&clockevent_clps711x); - - return IRQ_HANDLED; -} - -static struct irqaction clps711x_timer_irq = { - .name = "clps711x-timer", - .flags = IRQF_TIMER | IRQF_IRQPOLL, - .handler = clps711x_timer_interrupt, -}; - -static void add_fixed_clk(struct clk *clk, const char *name, int rate) -{ - clk = clk_register_fixed_rate(NULL, name, NULL, CLK_IS_ROOT, rate); - clk_register_clkdev(clk, name, NULL); -} - void __init clps711x_timer_init(void) { - int osc, ext, pll, cpu, bus, timl, timh, uart, spi; - u32 tmp; - - osc = 3686400; - ext = 13000000; - - tmp = clps_readl(PLLR) >> 24; - if (tmp) - pll = (osc * tmp) / 2; - else - pll = 73728000; /* Default value */ - - tmp = clps_readl(SYSFLG2); - if (tmp & SYSFLG2_CKMODE) { - cpu = ext; - bus = cpu; - spi = 135400; - pll = 0; - } else { - cpu = pll; - if (cpu >= 36864000) - bus = cpu / 2; - else - bus = 36864000 / 2; - spi = cpu / 576; - } - - uart = bus / 10; - - if (tmp & SYSFLG2_CKMODE) { - tmp = clps_readl(SYSCON2); - if (tmp & SYSCON2_OSTB) - timh = ext / 26; - else - timh = 541440; - } else - timh = DIV_ROUND_CLOSEST(cpu, 144); - - timl = DIV_ROUND_CLOSEST(timh, 256); - - /* All clocks are fixed */ - add_fixed_clk(clk_pll, "pll", pll); - add_fixed_clk(clk_bus, "bus", bus); - add_fixed_clk(clk_uart, "uart", uart); - add_fixed_clk(clk_timerl, "timer_lf", timl); - add_fixed_clk(clk_timerh, "timer_hf", timh); - add_fixed_clk(clk_tint, "tint", 64); - add_fixed_clk(clk_spi, "spi", spi); - - pr_info("CPU frequency set at %i Hz.\n", cpu); - - /* Start Timer1 in free running mode (Low frequency) */ - tmp = clps_readl(SYSCON1) & ~(SYSCON1_TC1S | SYSCON1_TC1M); - clps_writel(tmp, SYSCON1); - - sched_clock_register(clps711x_sched_clock_read, 16, timl); - - clocksource_mmio_init(CLPS711X_VIRT_BASE + TC1D, - "clps711x_clocksource", timl, 300, 16, - clocksource_mmio_readw_down); - - /* Set Timer2 prescaler */ - clps_writew(DIV_ROUND_CLOSEST(timh, HZ), TC2D); - - /* Start Timer2 in prescale mode (High frequency)*/ - tmp = clps_readl(SYSCON1) | SYSCON1_TC2M | SYSCON1_TC2S; - clps_writel(tmp, SYSCON1); - - clockevents_config_and_register(&clockevent_clps711x, timh, 0, 0); - - setup_irq(IRQ_TC2OI, &clps711x_timer_irq); + clps711x_clk_init(CLPS711X_VIRT_BASE); + clps711x_clksrc_init(CLPS711X_VIRT_BASE + TC1D, + CLPS711X_VIRT_BASE + TC2D, IRQ_TC2OI); } void clps711x_restart(enum reboot_mode mode, const char *cmd) diff --git a/arch/arm/mach-clps711x/common.h b/arch/arm/mach-clps711x/common.h index f88189963898..370200b26333 100644 --- a/arch/arm/mach-clps711x/common.h +++ b/arch/arm/mach-clps711x/common.h @@ -16,3 +16,8 @@ extern void clps711x_restart(enum reboot_mode mode, const char *cmd); /* drivers/irqchip/irq-clps711x.c */ void clps711x_intc_init(phys_addr_t, resource_size_t); +/* drivers/clk/clk-clps711x.c */ +void clps711x_clk_init(void __iomem *base); +/* drivers/clocksource/clps711x-timer.c */ +void clps711x_clksrc_init(void __iomem *tc1_base, void __iomem *tc2_base, + unsigned int irq); diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 9de84a215abd..be9a51afe05a 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -85,7 +85,6 @@ config SOC_IMX25 config SOC_IMX27 bool - select ARCH_HAS_OPP select CPU_ARM926T select IMX_HAVE_IOMUX_V1 select MXC_AVIC @@ -659,7 +658,6 @@ comment "Device tree only" config SOC_IMX5 bool - select ARCH_HAS_OPP select HAVE_IMX_SRC select MXC_TZIC diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index ac88599ca080..23c02932bf84 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -93,9 +93,11 @@ obj-$(CONFIG_HAVE_IMX_ANATOP) += anatop.o obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o obj-$(CONFIG_HAVE_IMX_SRC) += src.o +ifdef CONFIG_SOC_IMX6 AFLAGS_headsmp.o :=-Wa,-march=armv7-a obj-$(CONFIG_SMP) += headsmp.o platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o +endif obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o obj-$(CONFIG_SOC_IMX6SL) += clk-imx6sl.o mach-imx6sl.o obj-$(CONFIG_SOC_IMX6SX) += clk-imx6sx.o mach-imx6sx.o diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index 6cceb7765c14..29d412975aff 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -194,6 +194,10 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk[IMX6QDL_CLK_PLL3_80M] = imx_clk_fixed_factor("pll3_80m", "pll3_usb_otg", 1, 6); clk[IMX6QDL_CLK_PLL3_60M] = imx_clk_fixed_factor("pll3_60m", "pll3_usb_otg", 1, 8); clk[IMX6QDL_CLK_TWD] = imx_clk_fixed_factor("twd", "arm", 1, 2); + if (cpu_is_imx6dl()) { + clk[IMX6QDL_CLK_GPU2D_AXI] = imx_clk_fixed_factor("gpu2d_axi", "mmdc_ch0_axi_podf", 1, 1); + clk[IMX6QDL_CLK_GPU3D_AXI] = imx_clk_fixed_factor("gpu3d_axi", "mmdc_ch0_axi_podf", 1, 1); + } clk[IMX6QDL_CLK_PLL4_POST_DIV] = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio", CLK_SET_RATE_PARENT, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock); clk[IMX6QDL_CLK_PLL4_AUDIO_DIV] = clk_register_divider(NULL, "pll4_audio_div", "pll4_post_div", CLK_SET_RATE_PARENT, base + 0x170, 15, 1, 0, &imx_ccm_lock); @@ -217,8 +221,10 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk[IMX6QDL_CLK_ESAI_SEL] = imx_clk_mux("esai_sel", base + 0x20, 19, 2, audio_sels, ARRAY_SIZE(audio_sels)); clk[IMX6QDL_CLK_ASRC_SEL] = imx_clk_mux("asrc_sel", base + 0x30, 7, 2, audio_sels, ARRAY_SIZE(audio_sels)); clk[IMX6QDL_CLK_SPDIF_SEL] = imx_clk_mux("spdif_sel", base + 0x30, 20, 2, audio_sels, ARRAY_SIZE(audio_sels)); - clk[IMX6QDL_CLK_GPU2D_AXI] = imx_clk_mux("gpu2d_axi", base + 0x18, 0, 1, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels)); - clk[IMX6QDL_CLK_GPU3D_AXI] = imx_clk_mux("gpu3d_axi", base + 0x18, 1, 1, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels)); + if (cpu_is_imx6q()) { + clk[IMX6QDL_CLK_GPU2D_AXI] = imx_clk_mux("gpu2d_axi", base + 0x18, 0, 1, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels)); + clk[IMX6QDL_CLK_GPU3D_AXI] = imx_clk_mux("gpu3d_axi", base + 0x18, 1, 1, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels)); + } clk[IMX6QDL_CLK_GPU2D_CORE_SEL] = imx_clk_mux("gpu2d_core_sel", base + 0x18, 16, 2, gpu2d_core_sels, ARRAY_SIZE(gpu2d_core_sels)); clk[IMX6QDL_CLK_GPU3D_CORE_SEL] = imx_clk_mux("gpu3d_core_sel", base + 0x18, 4, 2, gpu3d_core_sels, ARRAY_SIZE(gpu3d_core_sels)); clk[IMX6QDL_CLK_GPU3D_SHADER_SEL] = imx_clk_mux("gpu3d_shader_sel", base + 0x18, 8, 2, gpu3d_shader_sels, ARRAY_SIZE(gpu3d_shader_sels)); diff --git a/arch/arm/mach-imx/suspend-imx6.S b/arch/arm/mach-imx/suspend-imx6.S index 74b50f1982db..ca4ea2daf25b 100644 --- a/arch/arm/mach-imx/suspend-imx6.S +++ b/arch/arm/mach-imx/suspend-imx6.S @@ -173,6 +173,8 @@ ENTRY(imx6_suspend) ldr r6, [r11, #0x0] ldr r11, [r0, #PM_INFO_MX6Q_GPC_V_OFFSET] ldr r6, [r11, #0x0] + ldr r11, [r0, #PM_INFO_MX6Q_IOMUXC_V_OFFSET] + ldr r6, [r11, #0x0] /* use r11 to store the IO address */ ldr r11, [r0, #PM_INFO_MX6Q_SRC_V_OFFSET] diff --git a/arch/arm/mach-msm/board-mahimahi.c b/arch/arm/mach-msm/board-mahimahi.c deleted file mode 100644 index 873c3ca3cd7e..000000000000 --- a/arch/arm/mach-msm/board-mahimahi.c +++ /dev/null @@ -1,83 +0,0 @@ -/* linux/arch/arm/mach-msm/board-mahimahi.c - * - * Copyright (C) 2009 Google, Inc. - * Copyright (C) 2009 HTC Corporation. - * Author: Dima Zavin <dima@android.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/delay.h> -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/input.h> -#include <linux/io.h> -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/memblock.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/setup.h> - -#include <mach/hardware.h> - -#include "board-mahimahi.h" -#include "devices.h" -#include "proc_comm.h" -#include "common.h" - -static uint debug_uart; - -module_param_named(debug_uart, debug_uart, uint, 0); - -static struct platform_device *devices[] __initdata = { -#if !defined(CONFIG_MSM_SERIAL_DEBUGGER) - &msm_device_uart1, -#endif - &msm_device_uart_dm1, - &msm_device_nand, -}; - -static void __init mahimahi_init(void) -{ - platform_add_devices(devices, ARRAY_SIZE(devices)); -} - -static void __init mahimahi_fixup(struct tag *tags, char **cmdline) -{ - memblock_add(PHYS_OFFSET, 219*SZ_1M); - memblock_add(MSM_HIGHMEM_BASE, MSM_HIGHMEM_SIZE); -} - -static void __init mahimahi_map_io(void) -{ - msm_map_common_io(); - msm_clock_init(); -} - -static void __init mahimahi_init_late(void) -{ - smd_debugfs_init(); -} - -void msm_timer_init(void); - -MACHINE_START(MAHIMAHI, "mahimahi") - .atag_offset = 0x100, - .fixup = mahimahi_fixup, - .map_io = mahimahi_map_io, - .init_irq = msm_init_irq, - .init_machine = mahimahi_init, - .init_late = mahimahi_init_late, - .init_time = msm_timer_init, -MACHINE_END diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c index 245884319d2e..8f5ecdc4f3ce 100644 --- a/arch/arm/mach-msm/board-msm7x30.c +++ b/arch/arm/mach-msm/board-msm7x30.c @@ -124,7 +124,7 @@ struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = { static struct platform_device *devices[] __initdata = { &msm_clock_7x30, &msm_device_gpio_7x30, -#if defined(CONFIG_SERIAL_MSM) || defined(CONFIG_MSM_SERIAL_DEBUGGER) +#if defined(CONFIG_SERIAL_MSM) &msm_device_uart2, #endif &msm_device_smd, diff --git a/arch/arm/mach-msm/board-trout-gpio.c b/arch/arm/mach-msm/board-trout-gpio.c index 2c25050209ce..722ad63b7edc 100644 --- a/arch/arm/mach-msm/board-trout-gpio.c +++ b/arch/arm/mach-msm/board-trout-gpio.c @@ -94,7 +94,7 @@ static int trout_gpio_to_irq(struct gpio_chip *chip, unsigned offset) } static struct msm_gpio_chip msm_gpio_banks[] = { -#if defined(CONFIG_MSM_DEBUG_UART1) +#if defined(CONFIG_DEBUG_MSM_UART) && (CONFIG_DEBUG_UART_PHYS == 0xa9a00000) /* H2W pins <-> UART1 */ TROUT_GPIO_BANK("MISC2", 0x00, TROUT_GPIO_MISC2_BASE, 0x40), #else diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c index f72b07de2152..ba3edd3a46cb 100644 --- a/arch/arm/mach-msm/board-trout.c +++ b/arch/arm/mach-msm/board-trout.c @@ -88,7 +88,7 @@ static void __init trout_map_io(void) msm_map_common_io(); iotable_init(trout_io_desc, ARRAY_SIZE(trout_io_desc)); -#ifdef CONFIG_MSM_DEBUG_UART3 +#if defined(CONFIG_DEBUG_MSM_UART) && (CONFIG_DEBUG_UART_PHYS == 0xa9c00000) /* route UART3 to the "H2W" extended usb connector */ writeb(0x80, TROUT_CPLD_BASE + 0x00); #endif diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c index 34e09474636d..b042dca1f633 100644 --- a/arch/arm/mach-msm/io.c +++ b/arch/arm/mach-msm/io.c @@ -57,8 +57,7 @@ static struct map_desc msm_io_desc[] __initdata = { .length = MSM_SHARED_RAM_SIZE, .type = MT_DEVICE, }, -#if defined(CONFIG_DEBUG_MSM_UART1) || defined(CONFIG_DEBUG_MSM_UART2) || \ - defined(CONFIG_DEBUG_MSM_UART3) +#if defined(CONFIG_DEBUG_MSM_UART) { /* Must be last: virtual and pfn filled in by debug_ll_addr() */ .length = SZ_4K, @@ -76,8 +75,7 @@ void __init msm_map_common_io(void) * pages are peripheral interface or not. */ asm("mcr p15, 0, %0, c15, c2, 4" : : "r" (0)); -#if defined(CONFIG_DEBUG_MSM_UART1) || defined(CONFIG_DEBUG_MSM_UART2) || \ - defined(CONFIG_DEBUG_MSM_UART3) +#if defined(CONFIG_DEBUG_MSM_UART) #ifdef CONFIG_MMU debug_ll_addr(&msm_io_desc[size - 1].pfn, &msm_io_desc[size - 1].virtual); diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index e15dff790dbb..efc49dabbf2f 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -1,6 +1,30 @@ config ARCH_SHMOBILE bool +config PM_RCAR + bool + +config PM_RMOBILE + bool + +config ARCH_RCAR_GEN1 + bool + select PM_RCAR if PM || SMP + select RENESAS_INTC_IRQPIN + select SYS_SUPPORTS_SH_TMU + +config ARCH_RCAR_GEN2 + bool + select PM_RCAR if PM || SMP + select RENESAS_IRQC + select SYS_SUPPORTS_SH_CMT + +config ARCH_RMOBILE + bool + select PM_RMOBILE if PM && !ARCH_SHMOBILE_MULTI + select SYS_SUPPORTS_SH_CMT + select SYS_SUPPORTS_SH_TMU + menuconfig ARCH_SHMOBILE_MULTI bool "Renesas ARM SoCs" if ARCH_MULTI_V7 depends on MMU @@ -28,18 +52,15 @@ config ARCH_R7S72100 config ARCH_R8A7779 bool "R-Car H1 (R8A77790)" - select RENESAS_INTC_IRQPIN - select SYS_SUPPORTS_SH_TMU + select ARCH_RCAR_GEN1 config ARCH_R8A7790 bool "R-Car H2 (R8A77900)" - select RENESAS_IRQC - select SYS_SUPPORTS_SH_CMT + select ARCH_RCAR_GEN2 config ARCH_R8A7791 - bool "R-Car M2 (R8A77910)" - select RENESAS_IRQC - select SYS_SUPPORTS_SH_CMT + bool "R-Car M2-W (R8A77910)" + select ARCH_RCAR_GEN2 comment "Renesas ARM SoCs Board Type" @@ -71,82 +92,60 @@ comment "Renesas ARM SoCs System Type" config ARCH_SH7372 bool "SH-Mobile AP4 (SH7372)" + select ARCH_RMOBILE select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_CPU_SUSPEND if PM || CPU_IDLE - select CPU_V7 - select SH_CLK_CPG - select SYS_SUPPORTS_SH_CMT - select SYS_SUPPORTS_SH_TMU + select SH_INTC config ARCH_SH73A0 bool "SH-Mobile AG5 (R8A73A00)" + select ARCH_RMOBILE select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_GIC - select CPU_V7 select I2C - select SH_CLK_CPG + select SH_INTC select RENESAS_INTC_IRQPIN - select SYS_SUPPORTS_SH_CMT - select SYS_SUPPORTS_SH_TMU config ARCH_R8A73A4 bool "R-Mobile APE6 (R8A73A40)" + select ARCH_RMOBILE select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_GIC - select CPU_V7 - select SH_CLK_CPG select RENESAS_IRQC - select SYS_SUPPORTS_SH_CMT - select SYS_SUPPORTS_SH_TMU config ARCH_R8A7740 bool "R-Mobile A1 (R8A77400)" + select ARCH_RMOBILE select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_GIC - select CPU_V7 - select SH_CLK_CPG select RENESAS_INTC_IRQPIN - select SYS_SUPPORTS_SH_CMT - select SYS_SUPPORTS_SH_TMU config ARCH_R8A7778 bool "R-Car M1A (R8A77781)" + select ARCH_RCAR_GEN1 select ARCH_WANT_OPTIONAL_GPIOLIB - select CPU_V7 - select SH_CLK_CPG select ARM_GIC - select SYS_SUPPORTS_SH_TMU - select RENESAS_INTC_IRQPIN config ARCH_R8A7779 bool "R-Car H1 (R8A77790)" + select ARCH_RCAR_GEN1 select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_GIC - select CPU_V7 - select SH_CLK_CPG - select RENESAS_INTC_IRQPIN - select SYS_SUPPORTS_SH_TMU config ARCH_R8A7790 bool "R-Car H2 (R8A77900)" + select ARCH_RCAR_GEN2 select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_GIC - select CPU_V7 select MIGHT_HAVE_PCI - select SH_CLK_CPG - select RENESAS_IRQC - select SYS_SUPPORTS_SH_CMT select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE config ARCH_R8A7791 - bool "R-Car M2 (R8A77910)" + bool "R-Car M2-W (R8A77910)" + select ARCH_RCAR_GEN2 select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_GIC - select CPU_V7 select MIGHT_HAVE_PCI - select SH_CLK_CPG - select RENESAS_IRQC - select SYS_SUPPORTS_SH_CMT select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE config ARCH_R7S72100 diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index fe3878a1a69a..7b259ce60beb 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -8,15 +8,14 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/mach-shmobile/incl obj-y := timer.o console.o # CPU objects -obj-$(CONFIG_ARCH_SH7372) += setup-sh7372.o intc-sh7372.o -obj-$(CONFIG_ARCH_SH73A0) += setup-sh73a0.o intc-sh73a0.o +obj-$(CONFIG_ARCH_SH7372) += setup-sh7372.o intc-sh7372.o pm-sh7372.o +obj-$(CONFIG_ARCH_SH73A0) += setup-sh73a0.o intc-sh73a0.o pm-sh73a0.o obj-$(CONFIG_ARCH_R8A73A4) += setup-r8a73a4.o -obj-$(CONFIG_ARCH_R8A7740) += setup-r8a7740.o +obj-$(CONFIG_ARCH_R8A7740) += setup-r8a7740.o pm-r8a7740.o obj-$(CONFIG_ARCH_R8A7778) += setup-r8a7778.o -obj-$(CONFIG_ARCH_R8A7779) += setup-r8a7779.o -obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o -obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o setup-rcar-gen2.o -obj-$(CONFIG_ARCH_R8A7791) += setup-r8a7791.o setup-rcar-gen2.o +obj-$(CONFIG_ARCH_R8A7779) += setup-r8a7779.o pm-r8a7779.o +obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o pm-r8a7790.o +obj-$(CONFIG_ARCH_R8A7791) += setup-r8a7791.o pm-r8a7791.o obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o obj-$(CONFIG_ARCH_R7S72100) += setup-r7s72100.o @@ -36,8 +35,9 @@ endif # CPU reset vector handling objects cpu-y := platsmp.o headsmp.o -cpu-$(CONFIG_ARCH_R8A7790) += platsmp-apmu.o -cpu-$(CONFIG_ARCH_R8A7791) += platsmp-apmu.o + +# Shared SoC family objects +obj-$(CONFIG_ARCH_RCAR_GEN2) += setup-rcar-gen2.o platsmp-apmu.o $(cpu-y) # SMP objects smp-y := $(cpu-y) @@ -51,15 +51,11 @@ smp-$(CONFIG_ARCH_EMEV2) += smp-emev2.o headsmp-scu.o platsmp-scu.o obj-$(CONFIG_SUSPEND) += suspend.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_CPU_FREQ) += cpufreq.o -obj-$(CONFIG_ARCH_SH7372) += pm-sh7372.o sleep-sh7372.o pm-rmobile.o -obj-$(CONFIG_ARCH_SH73A0) += pm-sh73a0.o -obj-$(CONFIG_ARCH_R8A7740) += pm-r8a7740.o pm-rmobile.o -obj-$(CONFIG_ARCH_R8A7779) += pm-r8a7779.o pm-rcar.o -obj-$(CONFIG_ARCH_R8A7790) += pm-r8a7790.o pm-rcar.o $(cpu-y) -obj-$(CONFIG_ARCH_R8A7791) += pm-r8a7791.o pm-rcar.o $(cpu-y) +obj-$(CONFIG_PM_RCAR) += pm-rcar.o +obj-$(CONFIG_PM_RMOBILE) += pm-rmobile.o -# IRQ objects -obj-$(CONFIG_ARCH_SH7372) += entry-intc.o +# special sh7372 handling for IRQ objects and low level sleep code +obj-$(CONFIG_ARCH_SH7372) += entry-intc.o sleep-sh7372.o # Board objects ifdef CONFIG_ARCH_SHMOBILE_MULTI diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index 6dbaad611a92..e70983534403 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -1231,6 +1231,10 @@ clock_error: #define GPIO_PORT8CR IOMEM(0xe6050008) static void __init eva_init(void) { + static struct pm_domain_device domain_devices[] __initdata = { + { "A4LC", &lcdc0_device }, + { "A4LC", &hdmi_lcdc_device }, + }; struct platform_device *usb = NULL; regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers, @@ -1316,8 +1320,8 @@ static void __init eva_init(void) platform_add_devices(eva_devices, ARRAY_SIZE(eva_devices)); - rmobile_add_device_to_domain("A4LC", &lcdc0_device); - rmobile_add_device_to_domain("A4LC", &hdmi_lcdc_device); + rmobile_add_devices_to_domains(domain_devices, + ARRAY_SIZE(domain_devices)); if (usb) rmobile_add_device_to_domain("A3SP", usb); diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 79f448e93abb..d47b2623267b 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -1420,7 +1420,7 @@ static const struct pinctrl_map mackerel_pinctrl_map[] = { #define USCCR1 IOMEM(0xE6058144) static void __init mackerel_init(void) { - struct pm_domain_device domain_devices[] = { + static struct pm_domain_device domain_devices[] __initdata = { { "A4LC", &lcdc_device, }, { "A4LC", &hdmi_lcdc_device, }, { "A4LC", &meram_device, }, diff --git a/arch/arm/mach-shmobile/pm-r8a7740.c b/arch/arm/mach-shmobile/pm-r8a7740.c index a0d44d537fa0..3d507149a6c4 100644 --- a/arch/arm/mach-shmobile/pm-r8a7740.c +++ b/arch/arm/mach-shmobile/pm-r8a7740.c @@ -34,23 +34,21 @@ static int r8a7740_pd_a3sp_suspend(void) static struct rmobile_pm_domain r8a7740_pm_domains[] = { { + .genpd.name = "A4LC", + .bit_shift = 1, + }, { .genpd.name = "A4S", .bit_shift = 10, .gov = &pm_domain_always_on_gov, .no_debug = true, .suspend = r8a7740_pd_a4s_suspend, - }, - { + }, { .genpd.name = "A3SP", .bit_shift = 11, .gov = &pm_domain_always_on_gov, .no_debug = true, .suspend = r8a7740_pd_a3sp_suspend, }, - { - .genpd.name = "A4LC", - .bit_shift = 1, - }, }; void __init r8a7740_init_pm_domains(void) diff --git a/arch/arm/mach-shmobile/pm-rcar.c b/arch/arm/mach-shmobile/pm-rcar.c index 34b8a5674f85..00022ee56f80 100644 --- a/arch/arm/mach-shmobile/pm-rcar.c +++ b/arch/arm/mach-shmobile/pm-rcar.c @@ -31,8 +31,6 @@ #define SYSCISR_RETRIES 1000 #define SYSCISR_DELAY_US 1 -#if defined(CONFIG_PM) || defined(CONFIG_SMP) - static void __iomem *rcar_sysc_base; static DEFINE_SPINLOCK(rcar_sysc_lock); /* SMP CPUs + I/O devices */ @@ -137,5 +135,3 @@ void __iomem *rcar_sysc_init(phys_addr_t base) return rcar_sysc_base; } - -#endif /* CONFIG_PM || CONFIG_SMP */ diff --git a/arch/arm/mach-shmobile/pm-rmobile.c b/arch/arm/mach-shmobile/pm-rmobile.c index ebdd16e94a84..a88079af7914 100644 --- a/arch/arm/mach-shmobile/pm-rmobile.c +++ b/arch/arm/mach-shmobile/pm-rmobile.c @@ -27,7 +27,6 @@ #define PSTR_RETRIES 100 #define PSTR_DELAY_US 10 -#ifdef CONFIG_PM static int rmobile_pd_power_down(struct generic_pm_domain *genpd) { struct rmobile_pm_domain *rmobile_pd = to_rmobile_pd(genpd); @@ -151,4 +150,3 @@ void rmobile_add_devices_to_domains(struct pm_domain_device data[], rmobile_add_device_to_domain_td(data[j].domain_name, data[j].pdev, &latencies); } -#endif /* CONFIG_PM */ diff --git a/arch/arm/mach-shmobile/pm-rmobile.h b/arch/arm/mach-shmobile/pm-rmobile.h index 690553a06887..8f66b343162b 100644 --- a/arch/arm/mach-shmobile/pm-rmobile.h +++ b/arch/arm/mach-shmobile/pm-rmobile.h @@ -36,7 +36,7 @@ struct pm_domain_device { struct platform_device *pdev; }; -#ifdef CONFIG_PM +#ifdef CONFIG_PM_RMOBILE extern void rmobile_init_domains(struct rmobile_pm_domain domains[], int num); extern void rmobile_add_device_to_domain_td(const char *domain_name, struct platform_device *pdev, @@ -58,6 +58,6 @@ extern void rmobile_add_devices_to_domains(struct pm_domain_device data[], static inline void rmobile_add_devices_to_domains(struct pm_domain_device d[], int size) {} -#endif /* CONFIG_PM */ +#endif /* CONFIG_PM_RMOBILE */ #endif /* PM_RMOBILE_H */ diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c index 3d5eacaba3e6..30df532fcaa0 100644 --- a/arch/arm/mach-shmobile/setup-r8a7740.c +++ b/arch/arm/mach-shmobile/setup-r8a7740.c @@ -747,6 +747,19 @@ static void r8a7740_i2c_workaround(struct platform_device *pdev) void __init r8a7740_add_standard_devices(void) { + static struct pm_domain_device domain_devices[] __initdata = { + { "A3SP", &scif0_device }, + { "A3SP", &scif1_device }, + { "A3SP", &scif2_device }, + { "A3SP", &scif3_device }, + { "A3SP", &scif4_device }, + { "A3SP", &scif5_device }, + { "A3SP", &scif6_device }, + { "A3SP", &scif7_device }, + { "A3SP", &scif8_device }, + { "A3SP", &i2c1_device }, + }; + /* I2C work-around */ r8a7740_i2c_workaround(&i2c0_device); r8a7740_i2c_workaround(&i2c1_device); @@ -762,17 +775,8 @@ void __init r8a7740_add_standard_devices(void) ARRAY_SIZE(r8a7740_late_devices)); /* add devices to PM domain */ - - rmobile_add_device_to_domain("A3SP", &scif0_device); - rmobile_add_device_to_domain("A3SP", &scif1_device); - rmobile_add_device_to_domain("A3SP", &scif2_device); - rmobile_add_device_to_domain("A3SP", &scif3_device); - rmobile_add_device_to_domain("A3SP", &scif4_device); - rmobile_add_device_to_domain("A3SP", &scif5_device); - rmobile_add_device_to_domain("A3SP", &scif6_device); - rmobile_add_device_to_domain("A3SP", &scif7_device); - rmobile_add_device_to_domain("A3SP", &scif8_device); - rmobile_add_device_to_domain("A3SP", &i2c1_device); + rmobile_add_devices_to_domains(domain_devices, + ARRAY_SIZE(domain_devices)); } void __init r8a7740_add_early_devices(void) diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c index 9cdfcdfd38fc..a04fa5fd00fd 100644 --- a/arch/arm/mach-shmobile/setup-sh7372.c +++ b/arch/arm/mach-shmobile/setup-sh7372.c @@ -927,7 +927,7 @@ static struct platform_device *sh7372_late_devices[] __initdata = { void __init sh7372_add_standard_devices(void) { - struct pm_domain_device domain_devices[] = { + static struct pm_domain_device domain_devices[] __initdata = { { "A3RV", &vpu_device, }, { "A4MP", &spu0_device, }, { "A4MP", &spu1_device, }, diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c index 42d4753683ce..d7598aeed803 100644 --- a/arch/arm/mach-sunxi/sunxi.c +++ b/arch/arm/mach-sunxi/sunxi.c @@ -12,81 +12,9 @@ #include <linux/clk-provider.h> #include <linux/clocksource.h> -#include <linux/delay.h> -#include <linux/kernel.h> #include <linux/init.h> -#include <linux/of_address.h> -#include <linux/of_irq.h> -#include <linux/of_platform.h> -#include <linux/io.h> -#include <linux/reboot.h> #include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/system_misc.h> - -#define SUN4I_WATCHDOG_CTRL_REG 0x00 -#define SUN4I_WATCHDOG_CTRL_RESTART BIT(0) -#define SUN4I_WATCHDOG_MODE_REG 0x04 -#define SUN4I_WATCHDOG_MODE_ENABLE BIT(0) -#define SUN4I_WATCHDOG_MODE_RESET_ENABLE BIT(1) - -#define SUN6I_WATCHDOG1_IRQ_REG 0x00 -#define SUN6I_WATCHDOG1_CTRL_REG 0x10 -#define SUN6I_WATCHDOG1_CTRL_RESTART BIT(0) -#define SUN6I_WATCHDOG1_CONFIG_REG 0x14 -#define SUN6I_WATCHDOG1_CONFIG_RESTART BIT(0) -#define SUN6I_WATCHDOG1_CONFIG_IRQ BIT(1) -#define SUN6I_WATCHDOG1_MODE_REG 0x18 -#define SUN6I_WATCHDOG1_MODE_ENABLE BIT(0) - -static void __iomem *wdt_base; - -static void sun4i_restart(enum reboot_mode mode, const char *cmd) -{ - if (!wdt_base) - return; - - /* Enable timer and set reset bit in the watchdog */ - writel(SUN4I_WATCHDOG_MODE_ENABLE | SUN4I_WATCHDOG_MODE_RESET_ENABLE, - wdt_base + SUN4I_WATCHDOG_MODE_REG); - - /* - * Restart the watchdog. The default (and lowest) interval - * value for the watchdog is 0.5s. - */ - writel(SUN4I_WATCHDOG_CTRL_RESTART, wdt_base + SUN4I_WATCHDOG_CTRL_REG); - - while (1) { - mdelay(5); - writel(SUN4I_WATCHDOG_MODE_ENABLE | SUN4I_WATCHDOG_MODE_RESET_ENABLE, - wdt_base + SUN4I_WATCHDOG_MODE_REG); - } -} - -static struct of_device_id sunxi_restart_ids[] = { - { .compatible = "allwinner,sun4i-a10-wdt" }, - { /*sentinel*/ } -}; - -static void sunxi_setup_restart(void) -{ - struct device_node *np; - - np = of_find_matching_node(NULL, sunxi_restart_ids); - if (WARN(!np, "unable to setup watchdog restart")) - return; - - wdt_base = of_iomap(np, 0); - WARN(!wdt_base, "failed to map watchdog base address"); -} - -static void __init sunxi_dt_init(void) -{ - sunxi_setup_restart(); - - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); -} static const char * const sunxi_board_dt_compat[] = { "allwinner,sun4i-a10", @@ -96,9 +24,7 @@ static const char * const sunxi_board_dt_compat[] = { }; DT_MACHINE_START(SUNXI_DT, "Allwinner A1X (Device Tree)") - .init_machine = sunxi_dt_init, .dt_compat = sunxi_board_dt_compat, - .restart = sun4i_restart, MACHINE_END static const char * const sun6i_board_dt_compat[] = { @@ -126,9 +52,7 @@ static const char * const sun7i_board_dt_compat[] = { }; DT_MACHINE_START(SUN7I_DT, "Allwinner sun7i (A20) Family") - .init_machine = sunxi_dt_init, .dt_compat = sun7i_board_dt_compat, - .restart = sun4i_restart, MACHINE_END static const char * const sun8i_board_dt_compat[] = { |